MOVED: K8N neo4 platinum (non-Sli) SiI3114 RAID error on startup

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=130443.0

Well I went out and purchased a USB to PS/2 adapter and plugged it in with the USB keyboard that would light up but still not work and......................... STILL DID NOT WORK!
Im going on 2 weeks now with no Counter-Strike:Source and im goin nuts  
Quote from: ck5134 on 07-September-05, 03:12:50
Grimster i agree totaly with jeanguy, you need around 25-30amps min on these boards, so try a mates psu.
Do I really need more than 18a with my system? How much money (ballpark) in US dollars do you think a adequate PSU for my rig would cost???
I am really thinking of just takeing it back and getting it replaced with the same mobo and see if that works.

Similar Messages

  • K8N Neo4 Plat (non sli) Device manager error !

    guys:
    need some help. as stated,, have just received a k8n neo4 plat (non sli). just installed win xp pro (many thanx to people on forum for good tips on coming up clean). i have 1 problem, i have 1 item in device manager banged out (!), its a "PCI Memory Controller. i have nothing on mobo cept 1 6600 gt video card, 1 stick mushkin 3200 dram, i maxtor 200gb sata hard drive. searched on msi's site for this driver and can't find it. any ideas on what i'm missing?? sorry for not having rest of sys specs in sig but just got this puter up and running and i would like to get this driver installed  before i pack it in for night. thanx for any help on this one.

    igmox:
    thanx!!! standalone drivers did the trick. when i was puttin this puter together i downloaded the standalone drivers and extracted them onto a cd. when i booted, anything in device mangler that was banged out, i updated the drivers via the cd. this time i downloaded the standalone drivers, ran the exe (unchecked the ide drivers, since i'm gonna try and run 6 dvd burners) and viola,, driver found.

  • New K8N NEO4 Platinum (non SLi) wont leave boot screen???

    I just went out and purchased:
    AMD Athlon 3000+
    K8N NEO4 Platinum
    Some standard case with a 450w power suply
    On the +12v it says I have 18a
    And Im using some things from my old PC:
    (PCI) ATI Radeon 9200se (CrapTastic!)
    Maxtor 40Gig (not Sata)
    1x Samsung  PC2700 DDR 512mb RAM
    This is my first PC build and I ran into a couple of problems:
    I have tried 3 different PS/2 keyboards(2 older and 1 newer) and none of them work. It shows the Platinum screen and then goes to a different screen that says "Keyboard error or not plugged in"
    So I try my USB keyboard that I got about a year ago and the lights flash on the kb when I first start up but.....once I get to the Platinum screen the keyboard becomes unresponsive and I cant move off the Platinum Screen into BIOS or anything.
    PLEASE HELP!

    Well I went out and purchased a USB to PS/2 adapter and plugged it in with the USB keyboard that would light up but still not work and......................... STILL DID NOT WORK!
    Im going on 2 weeks now with no Counter-Strike:Source and im goin nuts  
    Quote from: ck5134 on 07-September-05, 03:12:50
    Grimster i agree totaly with jeanguy, you need around 25-30amps min on these boards, so try a mates psu.
    Do I really need more than 18a with my system? How much money (ballpark) in US dollars do you think a adequate PSU for my rig would cost???
    I am really thinking of just takeing it back and getting it replaced with the same mobo and see if that works.

  • K8N Neo4 Platinum Non-SLI

    System Specs:
    K8N Neo4 Platinum
    AMD A64 3200+
    1 Gig Kingston 333 Ram(2x512)
    MSI Theater 550 Tuner
    Hauppauge WinTV-500MCE
    80 GB System Drive
    200 GB Media Drive
    MSI 6600GT PCIe
    Windows MCE 2005, rollup 2
    For some reason I can't get 5.1 out via either SPID/F interface(optical or coaxial).  It was working before, so I don't know what I messed up, but here's the setup.  This is set in my living room, with the SPID/F out going to a Sony Reciever for 5.1 decoding.  Like I said, it used to work, I don't know what the issue is now. 
    Windows speaker configuration is set to 5.1 speakers, as is the MCE app.  I also have the RealTek Manager app set with with the correct speaker layout, but I'm only getting stereo out now.  The reciever I've isolated, and it isn't the problem.  But like I said, it was working before, but now I'm at a loss.  Any help will be appreciated.

    Quote from: MurdoK on 24-December-05, 18:05:57
    Hello !!
    First try to deinstall all sound drivers completly, then reinstall them. Make sure your 5.1 system works properly.
    Make sure you have the right output mode selected. (analog / digital )
    Greetz MurdoK
    All that has been done and tried, and and done and tried againn, and then I broke a plate, and then done and tried again.

  • MOVED: k8n neo4 platinum with tagan 480 PSU NO SOUND from onboard realtek 850 :-( Help

    This topic has been moved to AMD64 nVidia Based board. Please pay attention to what area you post in if you want help.
    https://forum-en.msi.com/index.php?topic=73850.0

    here's the article for n e 1 that needs it:
    https://forum-en.msi.com/index.php?threadid=69730
    summary:
    install amd cpu driver from amd site (extract the zip and do it that way through device manager)
    Also from AMD the core cpu tool for cool n quite
    install msi's live update and most drivers + tools you like EXCEPT the audio ones
    Install the nvidia 6.14 audi drivers manually and the audio util to configure speakers
    See the following article:
    https://forum-en.msi.com/index.php?topic=73804.msg519824#msg519824 for all the links
    Happy building :-) - note this is for the msi k8n neo4 platinum (NOT SLI) but has pci-e

  • MOVED: K8N Neo4 Platinum - Overclocking Troubles - Memory Timings (2T)

    This topic has been moved to Overclockers & Modding Corner.
    K8N Neo4 Platinum - Overclocking Troubles - Memory Timings (2T)

    i had a similar problem at first, my system wouldnt post even at shockingly low overclocks, like 225 fsb, anyway i noticed that the 1,5 bios automatically set some strange timings for my ram, cant remember exactly what but when i went through the timings manually then i could clock up to 280 or so.  This is on 166mhz memlock, i still cant get a decent overclock using the 150 memclock or anything lower.
    Contacted MSI but the 'technical support' department, although quick to respond, seemed absolutely clueless when it comes to overclocking.

  • K8n Neo Platinum non-booting SATA RAID setup question

    I've spent several hours searching an reading trying to find out how to setup a non-bootable SATA RAID. All I can seem to find are posts about bootable installs using F6 and the drivers on a floppy.
    I have setup the disks in the bios an defined the array an everything checks out. But when I boot back to WindowsXP it only sees 2 drives that it cannot find drivers for even if I point it to the correct Nvidia directory. I attempted to just reinstall the drivers but that caused a Bluescreen from a corrupt driver file that I then had to go into the repair console to copy from a floppy.
    The manual an a couple of posts here say that I should go into Admin Tools-> Disk Management an it will then popup a wizard. But I'm not getting that far.
    I currently have the disks on SATA 1 and 2 but will move them tonite because I've read its better for them to be on 3 and 4.
    This is on a K8N Neo Platinum 7030 on Windows XP SP2.  If anyone could help or just point me to where I can find help it would be greatly appreciated. 

    When the raid controller is enabled in bios and you start windows you can install the nvidia raid driver
    from within windows .
    Use the add hardware wizard from control panel .
    Start the add-hw wizard .
    Yes i have connected the hw - next .
    Add a new hw device (bottom of the list ) -next .
    Install the hw that i select manually from a list - next .
    Select scsi/raid controller - next .
    Choose have disk .
    Then browse for the location of the nvraid.inf file

  • Help : MSI Neo4 Platinum (non-SLi)

    Hi,
    I just switch from a long time Asus Intel user to MSI AMD based rig (I am more into video editing & encoding than gaming). I bought a MSI Neo4 Platinum with AMD 3200+ (Venice) and from my old system, I have the Corsair TwinX XMS PC4000 ram and a RAID 0 setup with 2 X WD 74GB Raptor.
    Can anyone help me on :
    1) which slot should I installed my ram in order to run Dual Channel
    2) How do I perform moderate overclocking with this MSI Neo4
    3) which will be recommended HSF for moderate overclocking
    4) Will I experience the 219 BUG when overclocking

    hgled8888,
    They are all good heatsinks, I do not think you will go wrong with any of them.
    As for the BIOS, the difference is Award vs Phoenix. I use mobos from Abit, ASUS, and MSI, you get used to them, if you can get though one BIOS, you will have little trouble getting used to the other.
    As for moving over from "The Dark Side of the Force" over to AMD, welcome to the other side, you will love it and never look back. 
    Take Care,
    Richard

  • Neo4 Platinum (Non-SLi) Audio Plug

    I only purchased my computer on friday (17th of June) from a local retailer, and after the initial struggles i have only the one issue left.
    i read other topics about on-board audio issues relating to psu conflicts and missing voltage rails (way over my head) but to my understanding that was only to the Diamond and the Neo4 Plantinum SLi versions only.  I have the non-SLi version so here is another topic.
    Having updated bios and audio drivers and done everything else i can think of - the Front Channel plug of the on-board audio is completely dead.  not that the speakers dont work, and as far as i can tell not that the drivers dont work, but well and truely dead, nothing comes out speakers/audio devices connected to the Front Channel plug, not even EMI.
    All other channels work fine, and i was almost prepared to purchase a Audigy 2 sound card but also noticed a (long) topic regarding errors there too.  Naturally id like to avoid additional purchases if i can, so i thought i might ask the question:  Can i / should i send it to be repaired/replaced?
    I noticed there is a 7 day dead-on-arrival warrenty, but not sure if this applies to me as i bought it from a local computer store (brand new in the box and invoiced tho)

    Ah ok i didnt know who i could take it to to repair.
    I installed the drivers off the cd the first time, and after they didnt appear to be working i then formatted the PC and installed those Realtek AC97 drivers.  Unfortunately, if i plug the rear speakers into the front channel and the front speakers into the rear channel - the front speakers will play music from the rear channel fine, but the rear speakers on the front channel will be dead.
    Thanks for ya time.

  • MOVED: Neo4 Platinum (Non SLI) Issues and Bios 1b

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=92767.0

    It maybe the same problem I encountered.  This Post:  https://forum-en.msi.com/index.php?topic=90337.0
    Try starting your FSB at 230 and working up from there, if It becomes unstable at 237 ish then it is most likely the same memory controller/ ram problem I encountered. 
    Unfortunately I had to pull two sticks of memory to get mine to work, and I believe that it was just a bad stick , but I havent gotten new stuff in yet to prove or disprove that assumption.  Either way the way these bioses handle different kinds of memory at different dividers is frustrating to say the least. 

  • MOVED: updating MSI Neo4 Platinum (non sli) BIOS in XP

    This topic has been moved to BIOS.
    https://forum-en.msi.com/index.php?topic=94819.0

    hgled8888,
    They are all good heatsinks, I do not think you will go wrong with any of them.
    As for the BIOS, the difference is Award vs Phoenix. I use mobos from Abit, ASUS, and MSI, you get used to them, if you can get though one BIOS, you will have little trouble getting used to the other.
    As for moving over from "The Dark Side of the Force" over to AMD, welcome to the other side, you will love it and never look back. 
    Take Care,
    Richard

  • MSI K8N Neo4 Platinum nForce4 - can a raid be set up after a HD has info on it

    Ok so my computers PS died the other day, no biggie but in the process of getting it back up I pulled the battery and reset my Bios.
    My questions is, I used to have a Raid 1 set up now it's being shown as two hard drives, both with info on them. Can I just go back into the BIOS and set up the raid and go back to work?
    Oh and at start up I still get the error 'no keyboard' but if I plug a ps2 in it's fine, then ones windows is up I unplug it and the usb key/mouse work fine. Any ideas on how to fix.

    Quote from: BCB on 31-July-06, 21:23:39
    Ok so my computers PS died the other day, no biggie but in the process of getting it back up I pulled the battery and reset my Bios.
    My questions is, I used to have a Raid 1 set up now it's being shown as two hard drives, both with info on them. Can I just go back into the BIOS and set up the raid and go back to work?
    yes, it should work.
    Quote from: BCB on 31-July-06, 21:23:39
    Oh and at start up I still get the error 'no keyboard' but if I plug a ps2 in it's fine, then ones windows is up I unplug it and the usb key/mouse work fine. Any ideas on how to fix.
    go into bios and disable halt on errors (set it to none)

  • MOVED: K8N Neo4 Platinum vs Opteron 185

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=111468.0

    Quote from: poxy on 04-October-07, 22:34:55
    I reached 3Ghz easely....wohooo
    do a stability tests, ensure its stable and go ahead.. probably you can push it more...
    If you need help paste the last stable settings.(CPU-Z, main & memory pages, along with voltages used)

  • MOVED: K8N Neo4 Platinum upgrade components CPU & graphics

    This topic has been moved to AMD64 nVidia boards.
    https://forum-en.msi.com/index.php?topic=120305.0

    Quote from: s7nicho on 27-September-08, 21:03:15
    Thanks
    You've sussed I've got problems as a beginner even on using this forum. EG I've tried to put in my computer stats but not sure they are in.
    I've read that my mainboard can as a socket 939 use the dual- Core processor X2 and up to FX 60. However according to sisandra my board is not supporting dual core. Which is right?
    Thanks
    Nope, that's false info.
    Look here for supported CPU for your mainboard:
    http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=165&maincat_no=1#menu

  • MOVED: K8n Neo4 Platinum board, video card problem

    This topic has been moved to AMD64 nVidia boards.
    https://forum-en.msi.com/index.php?topic=122419.0

    No idea of what my bios is, but I can tell you that from the time I got it (about a year or maybe more) I haven't updated the bios at all.
    I have this board http://www.msicomputer.com/product/p_spec.asp?model=k8n_neo4_platinum

Maybe you are looking for