MOVED: k8n neo4 platinum with tagan 480 PSU NO SOUND from onboard realtek 850 :-( Help

This topic has been moved to AMD64 nVidia Based board. Please pay attention to what area you post in if you want help.
https://forum-en.msi.com/index.php?topic=73850.0

here's the article for n e 1 that needs it:
https://forum-en.msi.com/index.php?threadid=69730
summary:
install amd cpu driver from amd site (extract the zip and do it that way through device manager)
Also from AMD the core cpu tool for cool n quite
install msi's live update and most drivers + tools you like EXCEPT the audio ones
Install the nvidia 6.14 audi drivers manually and the audio util to configure speakers
See the following article:
https://forum-en.msi.com/index.php?topic=73804.msg519824#msg519824 for all the links
Happy building :-) - note this is for the msi k8n neo4 platinum (NOT SLI) but has pci-e

Similar Messages

K8n neo4 platinum with tagan 480 PSU NO SOUND from onboard realtek 850 :-( Help

I've hit a brick wall.
my sound card does not work and i have the amd 64bit 3500+ with msi-7125 version X.1.
Can anyone help as my next option is to go back to crapy yoyo tech who recommended and speced the solution knowing that there is an issue with the diamond model of the motherboard as you need -5 v for sound to work :-( nice!
I've tried triders from nvidia (forceware stuff) and got latest amd driver + msi live update.
Have not connected the front panel speaker connections either.
Thanks in advance peeps.

here's the article for n e 1 that needs it:
https://forum-en.msi.com/index.php?threadid=69730
summary:
install amd cpu driver from amd site (extract the zip and do it that way through device manager)
Also from AMD the core cpu tool for cool n quite
install msi's live update and most drivers + tools you like EXCEPT the audio ones
Install the nvidia 6.14 audi drivers manually and the audio util to configure speakers
See the following article:
https://forum-en.msi.com/index.php?topic=73804.msg519824#msg519824 for all the links
Happy building :-) - note this is for the msi k8n neo4 platinum (NOT SLI) but has pci-e

K8N Neo4 Platinum with Athlon 3200+ wrong multiplier?

I've got a K8N Neo4 Platinum with an Athlon 3200+ processor that's supposed to run at 2.2GHz
With the memory running at 200MHz the maximum multiplier I can select is x10 which only gives me a CPU speed of 2GHz
Shouldn't there be a x11 multiplier available for this CPU or have I missed something obvious?
BIOS is 7125v12

Hi there. A 3200+ S939 is supposed to run at 2000MHz. The S745 runs on 2,2GHz, due to single channel memory.
Cheers!!
3000+ = 1,8 GHz
3200+ = 2,0 GHz
3500+ = 2,2 Ghz

K8N Neo4 Platinum with 90nm San Diego 4000+

Hello everyone,
My first post here. Tomorrow I'm purchasing a K8N Neo4 Platinum MB (non SLI) and have requested the retail seller to get me a 90nm San Diego 4000+ instead of the older 130nm Clawhammer 4000+. Now, after reading through this forum it appears there may be a compatibility issue with the San Diego chip. Should I change to the Clawhammer or go ahead with the San Diego. I don't plan on OCing for a couple of months. What should I do?
Thanks!

Quote from: JJWOLD on 21-May-05, 19:55:22
Tom899
I just fired up my K8n Neo4/sli with a 4000 rev.e chip last night, Bios is showing 3.0 and working like it should. Have it hooked to a Enermax 535 watt and One Evga 6800gt pci-e with the second card still in the box, I want to give it a good update and test before I bring the second card online, Cpu running at 35c with the side of under a Thermalright xp 90C Heatsink fan blowing down, want to test it fan blowing up next. Good luck it's a nice chip.
JJWOLD, thanks for the update, good news for me. I picked up the board last night, the rest of the stuff should be here next week. I'm going to load it with WinXP 64, which I know has limited driver support but I have three other computers so I'll just take it very slow on additional hardware and software installations. I may even use the integrated sound for now. By the way, did your board come with the 1394 cable and bracket?
Thanks!

MOVED: K8N Neo4 Platinum - Overclocking Troubles - Memory Timings (2T)

This topic has been moved to Overclockers & Modding Corner.
K8N Neo4 Platinum - Overclocking Troubles - Memory Timings (2T)

i had a similar problem at first, my system wouldnt post even at shockingly low overclocks, like 225 fsb, anyway i noticed that the 1,5 bios automatically set some strange timings for my ram, cant remember exactly what but when i went through the timings manually then i could clock up to 280 or so. This is on 166mhz memlock, i still cant get a decent overclock using the 150 memclock or anything lower.
Contacted MSI but the 'technical support' department, although quick to respond, seemed absolutely clueless when it comes to overclocking.

MOVED: K8N neo4 platinum (non-Sli) SiI3114 RAID error on startup

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=130443.0

Well I went out and purchased a USB to PS/2 adapter and plugged it in with the USB keyboard that would light up but still not work and......................... STILL DID NOT WORK!
Im going on 2 weeks now with no Counter-Strike:Source and im goin nuts
Quote from: ck5134 on 07-September-05, 03:12:50
Grimster i agree totaly with jeanguy, you need around 25-30amps min on these boards, so try a mates psu.
Do I really need more than 18a with my system? How much money (ballpark) in US dollars do you think a adequate PSU for my rig would cost???
I am really thinking of just takeing it back and getting it replaced with the same mobo and see if that works.

MOVED: K8N Neo4 Platinum vs Opteron 185

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=111468.0

Quote from: poxy on 04-October-07, 22:34:55
I reached 3Ghz easely....wohooo
do a stability tests, ensure its stable and go ahead.. probably you can push it more...
If you need help paste the last stable settings.(CPU-Z, main & memory pages, along with voltages used)

MOVED: K8N Neo4 Platinum upgrade components CPU & graphics

This topic has been moved to AMD64 nVidia boards.
https://forum-en.msi.com/index.php?topic=120305.0

Quote from: s7nicho on 27-September-08, 21:03:15
Thanks
You've sussed I've got problems as a beginner even on using this forum. EG I've tried to put in my computer stats but not sure they are in.
I've read that my mainboard can as a socket 939 use the dual- Core processor X2 and up to FX 60. However according to sisandra my board is not supporting dual core. Which is right?
Thanks
Nope, that's false info.
Look here for supported CPU for your mainboard:
http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=165&maincat_no=1#menu

MOVED: K8n Neo4 Platinum board, video card problem

This topic has been moved to AMD64 nVidia boards.
https://forum-en.msi.com/index.php?topic=122419.0

No idea of what my bios is, but I can tell you that from the time I got it (about a year or maybe more) I haven't updated the bios at all.
I have this board http://www.msicomputer.com/product/p_spec.asp?model=k8n_neo4_platinum

K8N neo4 platinum /sli & msi 6800gt video card problem.... urgent help!!!!

I simply can't get the video card to work in the firts PCI-E port, however if the card is in the second port it works fine without the D-bracket locking the PC. Does someone know why this happened?, is the motherboard damaged?, or is there a solution to this problem?
Note: D-bracket is indicating a Memory detection test problem, but as
I said if the Video card is in the second PCI-e port the PC works fine
Plase help does someone knows why this is happening?

Could you add the list of your components to your signature (e.g. power suppy, memory, etc).
I am assuming that the SLI connector card is firmly in place and set for non-SLI operation and
that the video card only works when inserted into the slot that what would normally be used
by a second SLI video card. Is this correct?
Have you tried resetting your BIOS?

K8N Neo4 Platinum, how to move MBR to sata (make it drive #1)?

I am not sure I am phrasing the question correctly, so bear with me. I have a K8N Neo4 platinum with the SiI3114 controller and sata ports 4-8 (I believe its what they are calling PCB 1.x) with bios v1.D. I moved the board to another box and installed winXP on it. I was running it with IDE hard drives. Everything was working great but the OS was running really slow so I bought a SATA 300 mb/s drive and pluged it into SATA1 (I read about using ports 3 and 4 for raid but I do not want to use the NVraid at all, it is disabled). Then I proceeded to reinstall win XP. In the setup, I deleted the original C partiton and created one on the sata drive and rebooted so that there would be no "C" drive confusion by the winxp setup (have had that problem before and this keeps it from happening). Went through the setup and the sata was correctly reported as "C". Told windows to install itself there but it told me that it needed to write to MBR on the old c drive but that, since I had deleted the partiton, it couldn't and had to format it. So I knew that something was wrong.
So I rebooted and disabled the ide bus that contained the old IDE drive and just left the CD ide bus enabled. WinXP installed fine with no complaints. Then it rebooted and I re-enabled the ide bus in the bios. It wouldn't boot into the partiton I just installed winxp on! To get it to boot, I had to use F11 (the bios boot menu) and select the sata drive. Went through the whole setup winXP thing and rebooted. Same problem, it wouldn't boot the sata drive. :(
As long as that ide bus with the old ide drive is enabled, it won't boot the sata drive! I have rearranged the boot order on the bios every way possible. I opened up the box and moved that ide chain with the old ide drive to the ide2 port and put the dvd drive on ide1. I made the old drive slave and the prior slave master. That didn't fix it either. How do I tell this motherboard that the 1st drive is the sata drive? How do I tell it the MBR should be there not on the old ide drive? How do I fix this? Thanks!

Thank you for your replies! Hans, thank you I will give it a go again doing full formats all the way. I usually use the full format when installing winXP but I did things in a different order than you instructed so I will definately try it.
Aicjofs, thank you, There are 3 hard drives in this system currently. There is the ide hard drive that used to be the "c" drive (a western digital 160gb ata133 7200rpm 8mb cache) and a second ide hard drive that is an extended partition with 1 logical drive with data on it (western digital 300gb ata133 7200rpm 8mb cache). Then there is a sata hard drive in sata1 port with 2 partitions one primary and one extended. The extended partion does have data on it as I moved stuff there after I got winXP up the 2nd time (western digital 250gb sata II 7200rpm 16mg cache). Right now, I have the ide drive with data on it as ide2 master and the old "c" drive as ide2 slave and it is unformatted and contains no partion information (I deleted the partition after I installed the SATA drive and installed winXP). XP won't boot. What happens is that, if I take the winxp cd out, it gives me a "no system" error. If I leave the WinXP cd in it boots that disk. However, if I use "f11" and choose to boot the sata drive, winxp comes up just fine. If I disable the ide bus with the two ide hard drives, it boots winxp just fine.
Edit: bios is v1.D. It feels like this mobo is telling windows setup that the master ide drive is the first disk and to ignore everything else. It feels like if I can just tell the mobo that the sata drive is the first disk then everything will work . It is late night where I am now, and I've been fighting with this since the afternoon so I might have to goto sleep but I will be back at it tomorrow and will go though what Hans instructed. If anyone has any otehr ideas, I'd really appreciate that as well.

SLI compatible NVidia cards on a K8N Neo4 Platinum

I have a K8N Neo4 Platinum with a 3500+ AMD64, is there any known problems with running the GeForce 7800GTX duel chip with 512Mb DDR3. I just wondered because it will be the first SLI complient graphics card I have purchased. Do you have to have a SLI chip setted NF4 board to run it?
Marc

first of all, i don't think there's a dual chip 7800 GTX 512 card out there. if you are talking about two single chip 7800 GTX 512, that is a different story. in that case yes, you need a SLI mobo, but that is not all. you need to have nforce4 sli chipset on it, because the sli mobos based on the nforce4 ultra are not enough you need a monster power supply cause those cards suck all the power from your average 450-500W PSU. i don't think that should be a problem for you, since you seem to be loaded with cash and can afford buying a new k8n diamond plus 2x16 sli mobo (2 x 7800GTX 512 = 1500 USD easy, if you can find them - alienware and monarch charge you in excess of 900 USD for each)

Problem replacing K8n Neo4 Platinum

Hello everybody, this is my first post here, I am a new member from Italy.
I have this problem:
I own a K8n Neo4 Platinum and when I changed the VGA from Nvidia 6600 GT to 8600 GTS the Mobo doesn't post anymore.. The usb diagnostig bracket says it's a memory problem but when I've put my memory banks on a different PC, they work just fine.
I think the problem was caused by the little space that I had between the VGA and the chipset cooler (Zalman passive);when I installed the VGA I damaged the chipset. Taking a closer look at it I noticed that 1 edge is damaged. I also substituted the Power suplly but the result is always the same.
So I decided to replace the mobo but I don't want to reinstall windows. Finding my same mobo is impossible here in Europe. I only found the K8n Neo4-F.
My question is the following :
-Does this Mobo use the same drivers that were installed on my HD? (latest driver downloaded from Nvidia version 6.86)
-Will I have problems with Windows ?

Massi186,
Moan Guide
Richard

K8N Neo4 Platinum Dual/Single Channel issue

Hey guys,
Ive searched trough these forums, but i cant find the answer.
I have a K8N Neo4 Platinum with a Corsair XL (TWINX1024-3200XL)1Gb Kit, and i just cant find how to run it Dual Channel, every time i boot it says Single Channel @ 201 MHZ..
I am running a Athlon64 3700+ San Diego CPU
Please help..
Kind regards,
Patrick

thanx dudes, a big for the help!

Building system for friend with K8N Neo4 Platinum

MSI K8N Neo4 Platinum
AMD Athlon 64 3200+ Venice (ADA3200CGBOX)
CT2KIT12864Z40B (2x1GB)
eVGA 256-P2-N516 (7800GT)
WD2500KS (250GB SATAII HDD)
ATXA9N-SS/500 (Case)
Aspire 120MM
Aspire 80MM
ND-3550A (DVD-RW)
TG-480-U22 (PSU)
Can anyone recommend BIOS and drivers I should preload to a CD? I would rather not install from retail CDs only to download new ones.
Are there any other concerns or things I should know of?
Thanks!

Quote from: Kwea on 10-January-06, 23:21:38
MSI K8N Neo4 Platinum
AMD Athlon 64 3200+ Venice (ADA3200CGBOX)
CT2KIT12864Z40B (2x1GB)
eVGA 256-P2-N516 (7800GT)
WD2500KS (250GB SATAII HDD)
ATXA9N-SS/500 (Case)
Aspire 120MM
Aspire 80MM
ND-3550A (DVD-RW)
TG-480-U22 (PSU)
Can anyone recommend BIOS and drivers I should preload to a CD? I would rather not install from retail CDs only to download new ones.
Are there any other concerns or things I should know of?
Thanks!
You can use CD drivers (if needed to get connected to net) and update. because of the item on CD will be out dated
I'am using V1.09 BIOS, Nforce 666, GFX 7772 works good for me

MOVED: k8n neo4 platinum with tagan 480 PSU NO SOUND from onboard realtek 850 :-( Help

Similar Messages

Maybe you are looking for