MOVED: K8T Neo hanging on WinXP start w/three memory modules

This topic has been moved to Retired motherboards.
https://forum-en.msi.com/index.php?topic=170675.0

Quote
Originally posted by Nutty Buddy
2) After the reboot, problems abound.
- The Windows Loadup screen with the scrolling green bars will only scroll 1 1/2 times before my login screen appears. With my KT3, it scrolled about 12 times, so something is not loading
That's because your system is much faster loading Windows!

Similar Messages

MOVED: K8T Neo-FSR BIOS didn't know sampron64

This topic has been moved to AMD64 VIA/AMD/ATI based board.
K8T Neo-FSR BIOS didn't know sampron64

Blue screens have nothing to do with the Bios update. Those are trypically symptopmatic of other issues like low amps on the 12v rail for the devices you use or memopry issues and that like. Start by testing memory with memtest86+ as it is one of the likelyest suspects. Also post how many amps are on the 12v rail base on the lable on the PSU.
As for contacting MSI directly about when a Bios update is coming won'y get an answer but you are welcomed to contact them at support.msi.com.tw if you like.

MOVED: K8T Neo-FIS2R SATA and Linux Question

This topic has been moved to Operating Systems.
K8T Neo-FIS2R SATA and Linux Question

Quote
Originally posted by chasmon
Hi all,
I have just setup up a brand new system but am having probelms getting it working. I want to install XP on a single Maxtor 160Gb drive.
I have my HD on Promise Ser1 and all SATA stuff in BIOS enabled. When I get to the screen I press F6 and then when promted I insert the floppy with the promise drivers on. I then get this message:
"File txtsetup.oem caused an unexpected error (4096) at line 1742 in d:\xpclient\base\boot\setup\oemdisk.c"
I can't get past this screen I have tried:
1.Drivers from the CD supplied.
2.Drivers from the MSI website.
Please help me this lot cost lots of hard earned I'm pretty gutted at the moment. I have also tried the Via chipset with no joy.
System:
Antec 380W PSU and Sonata Case
LG DVDROM 8163B
NEC DVDR/RW 2500B
Panasonic Floppy
Neo FIS2R mobo
Maxtor Diamondmax Plus 9 160Gb SATA150
Benq RF K/B & Mouse
Don't spam man! I posted something to this same question in another thread.. from you no less! Make a new thread! lol
Hijacking = bad!
Ian

MOVED: K8t Neo (ms 6702 v1.0) won't detect 1tb Seagate SATA hard drive at all

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=122948.0

Quote from: phonicx on 04-January-09, 21:07:32
2. Jumpering the drive to 150mbps (SATA I) limit...
Sorry, I missed where you mentioned trying the SATA 1.5 jumper prior to my post. This is concerning, though...
Quote
3. Flashing the bios to an earlier version with SATA ROM updates...
Later BIOS releases carry-over all the changes of previous releases. You don't need to go backwards to get the earlier change.
Which BIOS version did you have before and are using now? I'm having trouble determining which board you have from "K8T Neo (MS-6702 v1.0)". Is this your motherboard?
K8T Neo-FSR / FIS2R
I might be able to update the VIA SATA ROM in your BIOS to the latest version (v4.97) but I need to know for certain which board and BIOS.

MOVED: K8T Neo-V with Win XP Pro, computer restarts instead of shut down?

This topic has been moved to AMD64 VIA/AMD/ATI based board.
https://forum-en.msi.com/index.php?topic=93812.0

I disabled Boot on LAN, disabled Wake-On-PME in BIOS, and checked my control panel power settings, but it still restarts instead of shut down. I just got this motherboard and it started doing this ever since I installed it. I did reformat my hard drive and reinstall windows after I installed the motherboard. I'm trying to avoid opening the case again, I don't think I flipped the power switch and reset switch because when I push the reset button or use Start menu's restart, the computer still restarts. I guess I'll double check it again...
for the "clear cmos and load defaults in the bios", this is a brand new motherboard, shouldn't it already have the default settings? and what do I need to do to reinstall the mainboard's chipset drivers?
Thanks!!

MOVED: K8T Neo On-board SATA not working

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=142488.0

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=142488.0

MOVED: K8t neo fir front panel sound out?

This topic has been moved to AMD64 ATI/SiS/VIA based board.
https://forum-en.msi.com/index.php?topic=117772.0
Was in the wrong board.

Yes they need to be on if front panel is not connected as mentioned in the manual or you will not have have output at the rear connection. If front panel is connected you should have rear panel output if nothing is plugged in on the front panel output.
The jack acts as a switch, nothing plugged in, output to rear which will be the same as if jumpers were on.

MOVED: K8T Neo-FIS2R with Athlon 64 4000+ mobile CPU

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=135945.0

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=135945.0

MOVED: K8t-NEO with SATA 378TX2plus

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=120181.0

Read >>Posting Guide<<

MOVED: K8T Neo Internet Driver

This topic has been moved to AMD64 VIA/AMD/ATI based board.
https://forum-en.msi.com/index.php?topic=93429.0

Never really had any issues with that driver. However some simple suggestions.
Virus Check that rig.
Make sure that the Firewall is setup properly.
Remove the driver for the NIC from the Device Manager and let Windows restart and redetect it.
Check your cables and connections.
Try a standard NIC card if all else fails.

MOVED: K8T Neo-FSR/ FIS2R BIos HT link questions

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=120466.0

Hey thanx for the heads up on that bas but wanna see something funny
http://www.hwbot.org/result.do?resultId=777990
Check out the HT on Cpu-z in the screenshot. I was thinking that cant be right but I double checked and it was I guess I got lucky with the HT being that high.
THOMAS

MOVED: K8T Neo-FSR/ FIS2R Support Windows Viats

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=106628.0

Quote from: TV34 on 24-May-14, 00:01:27
@ XFM
from http://www.elektronik-kompendium.de/sites/com/1006201.htm
Schnittstelle Bandbreite Reichweite Geräteanzahl Einführung
Serial-ATA (SATA) 150 MByte/s 1 m 4 2003
Serial-ATA-II (SATA 2 / SATA-300) 300 MByte/s 1 m 16 2005
Serial-ATA-III (SATA 6G / SATA-600) 600 MByte/s 1 m 16 2007
mfg Tino
Got news for you, that's a typo there. * Should read 3 G. You apparently still don't understand the proper terminology.
Yes that's correct, SATA does not use jumpers for Master, Slave or Cable Select like PATA drives do.

[Athlon64] K8T Neo Hangs at Gigabit Boot agent

Topic pretty much explains it all. This morning I heard a long beep and jumped out of bed thinking my computer was overheating. Pulled the plug and the beep continued. Turned out the beep was my alarm clock which was unplugged and was telling me the batteries were dying, but that's another story. Anyway, I plugged the pc back in and hit the power button and now it won't boot. It either gets to the Gigabit boot agent and hangs, or gets to the SATA Raid Bios Setting Utility, scans for serial drives, finds none, and hangs there. I've reset the CMOS twice now, swapped harddrives around, and even swapped IDE ports around in every combo I can think of. I currently can't even get into the BIOS setup.
After messing around for a long while it now gives me 3 long beeps and no video at all anymore.
Problem fixed. Had to disconnect the cable for my LAN and that got me into the setup utillity so I could set up the boot sequence the way it used to be.

It happens to the best of us, glad it solved

Pavilion g6 laptop with start-up and memory module issue + beeping

My laptop is a g6-1c58dx. I was(?) having problems with my cooling fan, so I went about disassembling it to get into the fan to clean the fan out. So far, so good. I think I'm having some kind of problem putting the memory module back in now though. I'm not positive which side of the memory module was facing up when I took it out and I forgot which of the two slots it was in. However, I've tried with both sides in both slots and still no dice. Every time I hit the power button, the capslock button blinks, the screen doesn't turn on and I get three long beeps followed by two short beeps. I've been trying to find a good picture of the memory module in the laptop some place online to see if I'm doing something wrong, but I haven't been able to find a good enough one. I went digging into part of the support rescources here that mentioned having some video and such which might be related to my problem, but I couldn't find g6, only g1, g2, and g3. So, it's very late here. I've been working on this all night. Could anybody tell me what I need to do to end the maddness?
This question was solved.
View Solution.

Here it is:
https://www.youtube.com/watch?v=_1I0kahnC4I
and
https://www.youtube.com/watch?v=VLXe2LJXpBs
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Probs with k8t neo and radeon 9500 non pro

Hi!
I´m totaly new with amd and i got a msi k8t neo and a sempron 2800+ with 1gb memory and a saphire radeon 9500 non pro and the computer does not start with that graphiccard.The processor fan just spins up a bit then it dies. But with a gforce 5200 card the computer works fine. I have tryed the saphire card in my server with a P4 1,6ghz and on that motherboard it works just fine.
Im from sweden so my english is not the best ;-)

Quote from: qTj on 17-November-05, 20:25:05
Yes i have tryed all those things. But my card works perfectly in 2 diffrent computers. So i dont think that the vidccard is broken.. But what do i know...
Well you know that othergfx cards do work oin ur board, so I still say you RMA it, or swap if with another card that will work
Quote
"drulleförsäkringen"
translates like "fools insurance", apperently in Sweden U get a refund when u buy something and wreck it

MOVED: K8T Neo hanging on WinXP start w/three memory modules

Similar Messages

Maybe you are looking for