MOVED: K8T Neo Internet Driver

This topic has been moved to AMD64 VIA/AMD/ATI based board.
https://forum-en.msi.com/index.php?topic=93429.0

Never really had any issues with that driver. However some simple suggestions.
Virus Check that rig.
Make sure that the Firewall is setup properly.
Remove the driver for the NIC from the Device Manager and let Windows restart and redetect it.
Check your cables and connections.
Try a standard NIC card if all else fails.

Similar Messages

  • K8T Neo Internet Driver

    I have the above board and I have used it now in 2 different machines that I have built.  The board is good and is sturdy and just keeps on pluggin.  With all the movin' around I have replaced my CD that comes with the drivers, etc. and I am unable to get a Ethernet driver to load.
    I have gone to the support pages and found the driver but after downloading it, I am at a loss to either drag it off into a system 32 folder or into a .dll folder or what.  I basically have four files in the directory I downloaded and have no idea on what to do with them.
    All other downloaded drivers work and the machine is running great, I am just not able to get the ethernet driver loaded.
    Any suggestions or comments?
    thanks in advance
    Steve

    Never really had any issues with that driver. However some simple suggestions.
    Virus Check that rig.
    Make sure that the Firewall is setup properly.
    Remove the driver for the NIC from the Device Manager and let Windows restart and redetect it.
    Check your cables and connections.
    Try a standard NIC card if all else fails.

  • MOVED: K8t Neo (ms 6702 v1.0) won't detect 1tb Seagate SATA hard drive at all

    This topic has been moved to AMD64 ATI/SiS/VIA boards.
    https://forum-en.msi.com/index.php?topic=122948.0

    Quote from: phonicx on 04-January-09, 21:07:32
    2. Jumpering the drive to 150mbps (SATA I) limit...
    Sorry, I missed where you mentioned trying the SATA 1.5 jumper prior to my post.  This is concerning, though...
    Quote
    3. Flashing the bios to an earlier version with SATA ROM updates...
    Later BIOS releases carry-over all the changes of previous releases.  You don't need to go backwards to get the earlier change.
    Which BIOS version did you have before and are using now?  I'm having trouble determining which board you have from "K8T Neo (MS-6702 v1.0)".  Is this your motherboard?
    K8T Neo-FSR / FIS2R
    I might be able to update the VIA SATA ROM in your BIOS to the latest version (v4.97) but I need to know for certain which board and BIOS.

  • MOVED: K8T Neo-FIS2R SATA and Linux Question

    This topic has been moved to Operating Systems.
    K8T Neo-FIS2R SATA and Linux Question

    Quote
    Originally posted by chasmon
    Hi all,
    I have just setup up a brand new system but am having probelms getting it working. I want to install XP on a single Maxtor 160Gb drive.
    I have my HD on Promise Ser1 and all SATA stuff in BIOS enabled. When I get to the screen I press F6 and then when promted I insert the floppy with the promise drivers on. I then get this message:
    "File txtsetup.oem caused an unexpected error (4096) at line 1742 in d:\xpclient\base\boot\setup\oemdisk.c"
    I can't get past this screen I have tried:
    1.Drivers from the CD supplied.
    2.Drivers from the MSI website.
    Please help me this lot cost lots of hard earned I'm pretty gutted at the moment. I have also tried the Via chipset with no joy.
    System:
    Antec 380W PSU and Sonata Case
    LG DVDROM 8163B
    NEC DVDR/RW 2500B
    Panasonic Floppy
    Neo FIS2R mobo
    Maxtor Diamondmax Plus 9 160Gb SATA150
    Benq RF K/B & Mouse
    Don't spam man! I posted something to this same question in another thread.. from you no less! Make a new thread! lol
    Hijacking = bad!
    Ian

  • MOVED: K8T Neo-FSR BIOS didn't know sampron64

    This topic has been moved to AMD64 VIA/AMD/ATI based board.
    K8T Neo-FSR BIOS didn't know sampron64

    Blue screens have nothing to do with the Bios update. Those are trypically symptopmatic of other issues like low amps on the 12v rail for the devices you use or memopry issues and that like. Start by testing memory with memtest86+ as it is one of the likelyest suspects. Also post how many amps are on the 12v rail base on the lable on the PSU.
    As for contacting MSI directly about when a Bios update is coming won'y get an answer but you are welcomed to contact them at support.msi.com.tw if you like.

  • MOVED: K8T Neo-V with Win XP Pro, computer restarts instead of shut down?

    This topic has been moved to AMD64 VIA/AMD/ATI based board.
    https://forum-en.msi.com/index.php?topic=93812.0

    I disabled Boot on LAN, disabled Wake-On-PME in BIOS, and checked my control panel power settings, but it still restarts instead of shut down.  I just got this motherboard and it started doing this ever since I installed it.  I did reformat my hard drive and reinstall windows after I installed the motherboard.  I'm trying to avoid opening the case again, I don't think I flipped the power switch and reset switch because when I push the reset button or use Start menu's restart, the computer still restarts.  I guess I'll double check it again...
    for the "clear cmos and load defaults in the bios", this is a brand new motherboard, shouldn't it already have the default settings?  and what do I need to do to reinstall the mainboard's chipset drivers?
    Thanks!!

  • MOVED: K8T Neo-FSR/ FIS2R Support Windows Viats

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=106628.0

    Quote from: TV34 on 24-May-14, 00:01:27
    @ XFM
    from http://www.elektronik-kompendium.de/sites/com/1006201.htm
    Schnittstelle                                          Bandbreite     Reichweite   Geräteanzahl  Einführung
    Serial-ATA (SATA)                                150 MByte/s        1 m               4                     2003
    Serial-ATA-II (SATA 2 / SATA-300)        300 MByte/s        1 m             16                     2005
    Serial-ATA-III (SATA 6G / SATA-600)     600 MByte/s        1 m             16                     2007
    mfg Tino
     Got news for you, that's a typo there.  * Should read 3 G. You apparently still don't understand the proper terminology.
      Yes that's correct, SATA does not use jumpers for Master, Slave or Cable Select like PATA drives do.

  • MOVED: K8T Neo On-board SATA not working

    This topic has been moved to AMD64 ATI/SiS/VIA boards.
    https://forum-en.msi.com/index.php?topic=142488.0

    This topic has been moved to AMD64 ATI/SiS/VIA boards.
    https://forum-en.msi.com/index.php?topic=142488.0

  • MOVED: K8t neo fir front panel sound out?

    This topic has been moved to AMD64 ATI/SiS/VIA based board.
    https://forum-en.msi.com/index.php?topic=117772.0
    Was in the wrong board.

     Yes they need to be on if front panel is not connected as mentioned in the manual or you will not have have output at the rear connection. If front panel is connected you should have rear panel output if nothing is plugged in on the front panel output.
     The jack acts as a switch, nothing plugged in, output to rear which will be the same as if jumpers were on.

  • MOVED: K8T Neo-FIS2R with Athlon 64 4000+ mobile CPU

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=135945.0

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=135945.0

  • MOVED: K8t-NEO with SATA 378TX2plus

    This topic has been moved to AMD64 ATI/SiS/VIA boards.
    https://forum-en.msi.com/index.php?topic=120181.0

    Read >>Posting Guide<<

  • MOVED: K8T Neo hanging on WinXP start w/three memory modules

    This topic has been moved to Retired motherboards.
    https://forum-en.msi.com/index.php?topic=170675.0

    Quote
    Originally posted by Nutty Buddy
    2) After the reboot, problems abound.
    - The Windows Loadup screen with the scrolling green bars will only scroll 1 1/2 times before my login screen appears. With my KT3, it scrolled about 12 times, so something is not loading
    That's because your system is much faster loading Windows!

  • MOVED: K8T Neo-FSR/ FIS2R BIos HT link questions

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=120466.0

    Hey thanx for the heads up on that bas but wanna see something funny
    http://www.hwbot.org/result.do?resultId=777990
    Check out the HT on Cpu-z in the screenshot. I was thinking that cant be right but I double checked and it was I guess I got lucky with the HT being that high.
    THOMAS

  • MOVED: [Athlon64] K8T Neo- VIA K8T800 MS-6702 - Windows XP Professional x64 - Driver

    This topic has been moved to Operating Systems.
    [Athlon64] K8T Neo- VIA K8T800 MS-6702 - Windows XP Professional x64 - Driver

    Yes, but in the long run I think you would be better off with a PATA CD-device. Performance wise difference is very small.
    Eh, you tried hitting F11 during first BIOS screen, to select?

  • [Athlon64] CAN'T SEE SINGLE SATA DRIVE / K8T NEO no Promise controller

    I have a K8t NEO -the cheapskate version with no PROMISE SATA controller or on-board Firewire
    I have been running on XP SP2 on 2 IDE drives, everything is ok.  I added a SINGLE SATA drive and turned the VIA SATA controller on in BIOS. I did the MSI Live Update and have the latest VIA SATA driver, latest chipset, latest BIOS, latest EVERYTHING. At boot, the VIA SATA controller reports my Hitachi SATA as Channel 0  Primary"  in the SATA devices table.  Going into the SATA RAID menu it tells me "You can't make RAID with just one drive"  which is true, of course.  But the point is the controller SEES the drive.
    I've run MSI Live Update and have the latest BIOS, latest SATA XP driver, latest EVERYTHING.
    Windows XP doesn't see the SATA drive.
    In XP  I see a VIA RAID CONTROLLER in Hardware / Device Manager  which is DISABLED.   When I right-click then click ENABLE on the VIA RAID CONTROLLER  the machine reboots immediately.  I tried safe mode, same thing.  I tried BIOS settings of "No PNP O/S Installed"  and "Yes PNP O/S Installed"  and reset the NVRAM.  No change.
    I think there must be an IRQ conflict....  I have a sound card (on-board sound is turned OFF in BIOS) and AGP video card, and that's it- no WiFi NIC or anything else to eat up IRQ resources. I use the Realtek on-board ethernet.
    I tried my Windows 98 partition and that booted, detected the new hardware (VIA SATA) and I installed the driver from the MSI CD  and Win 98 is happy with the SATA drive..... it sees the drive just fine.
    How do I make Windows XP see the SATA drive?

    Have you tried starting XP with CD and entering recovery, log on as admin and see if SATA drive is there? Remember to "F6" with a floppy drive of SATA drivers for
    -XP-... I'm assuming you already have as you said all is uptodate.  When the boot BIOS for the VIA SATA apprears and you press "TAB" I believe it is, you can mess with the SATA functions. Sorry if does not apply to your compy or you've already done all this.... BTW you CAN run a RAID array with one HDD, at least thats what I did on my Promise controller.
    In my Device Manager under Disk drives it looks like this (notes bracketed are noting position):
    Promise 1+0 Stripe/RAID0 SCSI Disk Device (Bus Number 0, Target ID 1, LUN 0 (G:\ 1-160GB IDE Seagate/notice ONE drive)
    Promise 2+0 Stripe/RAID0 SCSI Disk Device (Bus Number 0, Target ID 0, LUN 0) (F:\ 2x200 SATA)
    ST3160023A (Location 1 (1) VIA IDE D:\)
    VIA SATA RAID 0 SCSI Disk Device (Bus Number 0, Target ID 0, LUN 0) (E:\ 2x120 SATA)
    WDC WD800JB-00CRA1 (Location 0 (0) VIA IDE C:\)
    Under the boards BIOS, is the SATA drive listed under the BOOT table??? In my system it lists the above 5 partitions (7 HDD's total), floppy, 2 CD/DVD drives, etc...
    Oh also in Device Manager IS the VIA SATA controller appearing in the "SCSI and RAID controllers" tab??? I have set mine to just SATA before and of course now it says "VIA SATA RAID Controller"... for you it should read "VIA SATA Controller". Remember there are 2 different drivers for the SATA controller, one for SATA and one for SATA RAID. Look on your floppy disk or if you saved out the updated driver. I made a new floppy with the latest XP drivers. When booting from WINXP CD, and promted for "F6" and press it, later it will show you TWO different drivers after reading the floppy disk for XP. You obviously want the non RAID driver... hope that helps somewhat... g'luck

Maybe you are looking for

  • I have an iPod 2nd gen, trying to get an update so I can add facebook, but it will not update. Current ver is 4.2.1 How do I get it to update?

    I have an iPod 2nd gen . I have been trying to get an update to the software, but it will not update. Current version is 4.2.1 Trying to update it so I can use facebook on it, but with this version facebook will not work. Can someone help  with this

  • Not Capturing Error

    I'm trying to capture HDV off a mini tape on a new JVC GY HD200 using Final Cut Studio 2. I've downloaded the updates for Final Cut. FC recognizes the camera, will control it, will allow an in point edit and an out edit point. When I click the Log Cl

  • "Host Process Rundll32 Has Stopped Working"

    Whenever I try to access the advanced settings option in my TouchPad, I get this this message that Rundll32 has stopped working. This is frustrating as I can't figure out what went wrong. Was working fine about a month ago. Can anyone help? Thanks.  

  • Airport Express or Extreme

    Should i get the Express basestation or the Extreme? i want to get fast internet up in my room, so i can play online ps3, and fast online computer games. Please help!

  • Error Using LISTAGG SQL Function

    Hello, I'm trying to use the new LISTAGG SQL function with the following expression in a report: select listagg(email, ';') within group (order by email) as email_list from sba_registration_entries where team=241 and I get the following SQL error in