MOVED: K9A Platinum and Vista 64 issues

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=109584.0

Quote from: Paul B on 20-March-08, 23:05:39
Hi all,
Ok so I said I'd report back once all working and here i am (touches wood )
So my system is now Phenom less, I'm a bit gutted it's going back for RMA for refund. I have in the mean time replaced it with an x2 5000+ BE.
So just a recap on my spec
K9a2 Platinum
x2 5000+ BE Running stock 2.6Ghz
8GB OCZ DDR2 800 Platinum
2 x 3870x2 in crossfire X mode.
Windows Vista x64 OEM
This OS now installed no issues no BSOD for secondary clock interrupt. But i did have issues installing it on the Promise raid array. Though it was the old more than 2GB ram thing so did the install with one stick and then Patch vista install the other 6GB but no still got system rebooting after the progress bar 9 times out of 10.
So i have the HDDs on the standard SB600 sata ports as individual drives, installed x64 all 8GB still installed. Not knowing yet if it was driver related I let vista install all the drivers, the only other driver my system needed were the cat 8.3s and I only installed the graphics driver and CCC not the IDE or north bridge filter as the system is using vistas default drivers.
I have installed all updates and everything seems rock solid. (touches more wood!!) I have spent the last week relentlessly trying to get this OS installed, but hey I learnt a few things along the way..
Paul
But now it is and I have my 8GB and crossfire X I'm happy and when the good Phenoms arrive I'll get one but I'll read all the reviews on the web first....
Hi,
Right then resurecting an oldish thread, I have just purchased a Phenom 9750 and installed with the new 1.4 bios, and all is well. The same Vista x64 install is rock solid and damn quick now.
Buy the B3 Phenoms with confidence they (AMD) have pulled back some ground and in my case some confidence.
Paul

Similar Messages

MOVED: K9A2 platinum and Vista x64 unsigned drivers

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=114418.0

Quote from: Fredrik Åsenius on 06-April-08, 02:55:35
No, that is not what I said. VistaX64 supports a lot of memory. Remember you have also a lot of memory on the video card. Your configuration might not, if the combination of the four sticks - of two different models - makes the system freeze.
Mixing memory is never good because it makes things harder for the processor (and it's memory controller).
You could still try reducing the speed of the memory, and/or increase the memory voltage a little bit.
I have 4 same memory moduls. I didn't mix modules. I just say, that same happens with my OLD 4 memory moduls(worked fine in my old motherboard Asus m2n-e sli), and with my new 4(exact same) modules.
Memory is on default speed....btw. These memory modules are DDR2-1066, but running on 800. Where should I lower speed more?

MOVED: K9A Platinum and Gigabyte GTX460 Incompatibility?

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=143545.0

Quote
I tried those steps and still no dice. It seems that the existence of the video card is not recognized by windows, the nvidia driver download website, or the latest correct nvidia drivers once I download and install them. If this is a problem with windows being unhappy, would it be advisable for me to try a fresh installation of windows on my second hard drive and see if I can get it to recognize the card?
Yes, do a fresh new OS installation in such case.
Quote
PS Thanks so much for the BIOS flashing utility that the guys on the forum wrote, it was easy to use and worked like a charm!

K9A Platinum and Sata Harddrive

Hi,
I recently upgraded from a K8n to a K9A Platinum and unfortunately my SATA drives no longer show up in the "safely remove hardware" icon in the taskbar.
I thought this might be a Windows problem with old boarddrivers and all, so i did a clean reinstall. Still not there. (In the disk policies tab under the drives property the "write caching and safe removal" is grayed out and set to "optimise for performance", the only thing can select is "enable write caching on the disk". I have no idea if this makes any difference, I just thought I'd mention it!)
Does anyone know how I could get the Sata drives to show up in the taskbar again??
I mostly found people wanting to get rid of the Sata drives in the taskbar, so call me weird! I want them back!!!
Thanks for your help!

Quote from: Ybeen on 29-August-07, 23:06:55
Yea, that's what i gather from all the post on the internet, I'm just not happy with what i have!
Is there anyone out there who can tell me why my "write caching and safe removal" policies under the harddrive properties is grayed out??
Thanks!!
"Yea, that's what i gather from all the post on the internet, I'm just not happy with what i have! "
"Is there anyone out there who can tell me why my "write caching and safe removal" policies under the harddrive properties is grayed out?? "
because those options are valid for removable storages only.
"Thanks!!"

K9a platinum and ocz memory cas 4-5-4-15

Hi ,
I need help and i need it fast
I have k9a platinum and i want to buy this memory:
OCZ Platinum 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800, 4-5-4-15,
Is it compatible with my mobo and do u have opinion about this ram?
Thanx

Well my OCZ RAM which is meant to run @ 800MHz 4-4-4-15 timings. Runs very fine @ 800MHz w/ 4-4-4-10. 4-4-4-10 works up until about 870MHz.
OCZ seem to state their timings lower then the RAM sticks can actually cope for some reason.
I'm pretty sure it'll work, but contact OCZ for a correct answer.
Also like Bas said: Sig should be updated

MSI K9A Platinum and VIA drivers issue? XP 0x0000007B stop error.

I get a Windows Stop error when trying to boot into Windows XP with new components. The SATA hard drive (and Windows XP installation) is from the old computer.
The new computer components are:
MB: MSI K9A Platinum, chipset: RD580 (North Bridge), SB600 (South Bridge)
CPU: AMD Athlon 64 x2 5600+, boxed (the cooler and fan came with the CPU).
Video: MSI Radeon 1950 XTX
The old (and working) computer setup is:
OS: XP Professional
MB: Abit AV8-3rd Eye, chipset: VIA K8T800Pro + VT8237
CPU: AMD Athlon 64 3500+
Video: Sapphire Radeon 9800Pro All-in-Wonder, videodriver: atidvag.dll version 6.14.10.6542
HD: Maxtor 6B200M0 SCSI Disk Device
BIOS: Phoenix 6.00PG 20.04.2005
System drivers with "via" in the name: VIAAGP1.SYS, viaide.sys, viasride.sys
VIA 4in1 (Hyperion) version: 4.55 (that can be found at HKEY_Local_Machine\Software\Via4in1Driver).
VIA 2.20e SATA/RAID driver was used when installing this computer setup.
The precise stop error is:
0x0000007B (0xba4c3528, 0xc0000034, 0x00000000, 0x00000000)
From many sites I have gathered that the error is related to Windows XP not being able to access a critical system drive. Most probably the SATA hard drive issue.
The problem probably is the VIA drivers of the old motherboard and/or the SATA driver.
First I should mention, that MSI K9A Platinum does not have a hard disk SATA driver. If it does, I have been unable to find one. Certainly no such floppy disk included, and no such driver in the MSI's Web page for this motherboard.
Second important point: I never used RAID. I did use VIA 2.20e SATA/RAID driver disk when installing Windows XP to the old computer.
Strange that the hard drive model is reported as a "SCSI Disk Device". It's not a SCSI drive however: it's a SATA disk.
I have tried to uninstal the motherboard chipset drivers (Hyperion v4.55), but there seems to be a bug here: the drivers should be uninstalled using the installation program, and select the uninstall option. However, I do not get the uninstallation option to choose at all! Yes, I'm using the normal installation mode, not the quick installation (although tried that, too). The Hyperion setup program just installs, and asks to reboot the computer. After rebooting and trying again, it still does not offer me an uninstallation choise.
I know how to install hard drive VIA SATA driver, but I have no idea how to uninstall it. And I'm afraid to do that without certainty that it IS the solution, since I could not access the hard drive any more in the old computer setup (and return to read this forum). Also, I do not have a floppy drive any more. Anyone know if there is an issue with K9A and XP having VIA SATA driver installed?
When I tried the new computer setup, I first tried the simplest possible hardware combination: there were no CD/DVD-drives, no (parallel)IDE hard drives, and no PCI cards, except the MSI video adapter.
My BIOS Setup experiments. None of these helped: got the same stop error each time.
1) I didn't much touch the BIOS setting first. Just tried to boot with the settings BIOS came with.
2) Next I disabled the integrated audio, LAN and IEE1394 devices and floppy drive and disabled all other choises except the SATA drive as a boot device.
3) Next I tried with the fail-safe BIOS defaults.
4) Cleared CMOS.
5) Changed OnChip SATA type from Native IDE to Legacy IDE. (Only one boot attempt with the setting as Legacy.)
6) Disabled PCI IDE BusMaster.
7) Never touched anything in the Cell Menu: so the settings are in minimum.
A step I have taken after the last attempt: run Windows XP hard drive error-checking tool to every logical drive with the fix option selected, and the system drive also with scan the bad sectors option selected.
My plans next are:
1) to install a newer Hyperion driver. If that would correct the no-unistallation-choice-bug,
2) to disable USB-devices in the BIOS (desperate),
3) to choose the Windows general video display driver (although I seriously doubt this is a display driver problem!).
4) to uninstall the Anti-Virus software (Avira Antivir).
I've read a numerous Web pages so far about the 0x0000007B stop error. Here are some links:
Quote
http://www.seagate.com/www/en-us/support/knowledge_base/
Stop 0x0000007B or INACCESSIBLE_BOOT_DEVICE
This Stop message, also known as Stop 0x7B, indicates that Windows XP Professional lost access to the system volume or boot volume during the startup process. This error always occurs while the system is starting and is often caused by one of the following:
* Hardware problems
* Corrupted or incompatible storage drivers
* File system problems
* Boot sector viruses
* Outdated firmware
During I/O system initialization, this error can occur when:
* The controller or driver for the startup device (typically the hard disk) failed to initialize the necessary hardware.
* File system initialization failed because the system did not recognize the data on the boot device.
Quote
http://support.microsoft.com/kb/314082
You receive a Stop 0x0000007B error after you move the Windows XP system disk to another computer
SYMPTOMS
After you move the Microsoft Windows XP system (boot) disk to a backup computer, you may receive the following Stop error when you try to start the Windows XP-based backup computer:
STOP: 0x0000007B (0xF741B84C,0xC0000034,0x00000000,0x00000000)
CAUSE
This error may occur if the registry entries and the drivers for the mass storage controller hardware in the backup computer are not installed in Windows XP.
RESOLUTION
To resolve this error, use the same hardware for the backup computer.
Heh, heh! Very nice Microsoft, but I plan to update my computer, so I NEED to use different components
Quote
http://support.microsoft.com/kb/324103
Device Driver Issues
You may receive a "Stop 0x0000007B" error message in the following scenarios:
•   A device driver that the computer boot controller needs is not configured to start during the startup process.
•   A device driver that the computer boot controller needs is corrupted.
•   Information in the Windows XP registry (information related to how the device drivers load during startup) is corrupted.
Hardware Issues
You may receive a "Stop 0x0000007B" error message if there is a resource conflict between the boot controller and another controller or between SCSI devices. You may also receive this Stop error message if drive translation is not being performed or if drive translation was changed. To troubleshoot this issue:
1.   If an IRQ or I/O port address conflict exists between the boot controller and another controller, Windows XP either stops responding (hangs) or displays a "Stop 0x0000007B" error message. If you recently added new hardware, remove the new hardware or reconfigure it so that it does not conflict with the resources of any other installed controllers.
2.   If you are using a SCSI hard disk, check the SCSI chain for correct termination. Remove any unused SCSI devices or make sure that each SCSI ID is unique.
3.   Make sure that drive translation is turned on (if it is required) and that it has not been changed. For example, if you recently switched controllers, this issue may occur. For additional information about this issue, click the following article number to view the article in the Microsoft Knowledge Base: 314082.
Quote
http://support.microsoft.com/kb/316401/
SYMPTOMS
When you start your Microsoft Windows XP-based computer after you replace the motherboard on the computer, you may receive a Stop error message that is similar to the following:
STOP 0x0000007B INACCESSABLE_BOOT_DEVICE
CAUSE
This issue may occur if the new motherboard contains an embedded IDE controller that has a different chipset than the original motherboard.
RESOLUTION
Method 1: Perform an in-place upgrade of Windows XP [<- That means repair installation of Windows XP]
•   Do not use a repair or in-place upgrade if you suspect disk problems.
Method 2: Repartition and format your hard disk and reinstall Windows XP

Alright I got the situation over.
Quote from: Roskaposti on 19-May-07, 04:44:59
My plans next are:
1) to install a newer Hyperion driver. If that would correct the no-unistallation-choice-bug,
2) to disable USB-devices in the BIOS (desperate),
3) to choose the Windows general video display driver (although I seriously doubt this is a display driver problem!).
4) to uninstall the Anti-Virus software (Avira Antivir).
I did try all all the above, and none of them helped.
And by the way: after installing the new Hyperion (VIA chipset drivers), I was finally able to also uninstall. It also uninstalled the IDE SATA (I think) and PATA drivers.
But what I had to do, was to make a REPAIR installation of Windows XP.
So, I was wondering now afterwards: this is really, really silly. Why the hell we need to re-install Windows if we move the SYSTEM SATA drive to another computer? We don't have similar problem with parallel IDE drives. Whom should we thank here??
The issue is to insert the driver files and the information of the ide drivers Windows should use with the next boot. How can it be this difficult?
What you basically need is..
- the information about the new chipset's PCIIDE.SYS/[VENDOR_PROVIDED_FILE].SYS and ATAPIIDE.SYS inserted into the values in HKEY_LOCAL_MACHINE\SYSTEM\ControlSetXXX\Control\CriticalDeviceDatabase
- and the vendor's IDE drivers to the %SYSTEMROOT%/System32/drivers folder.
Maybe something else, I don't know. But the problem was, Windows didn't know how, or what drivers to use. That can't be so big problem you need to install the whole OS anew!

MOVED: K9A Platinum slower than cold tar in Vista but not XP.

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=109294.0

Thanks for the compliment. This system cost me well over 4k. You can see why I am not amused as to why I cannot play COD4. HL2E2 was great. What I have been teased with in COD4 is amazing.
Anyway, the BSOD's I get in Vista 64 are the atikmdag.sys not responding. After a quick dump the system reboots. I have forgotten about trying things in Vista. Getting it to work in XP would make me very happy. In XP and Vista, when launching COD4, the freeze is a complete system lockup at the logos and not a crash back to the desktop. I have to manually reset the system. I am not overclocking anything. Although my Diamond Radeon 2900's are factory overclocked. I have lowered the clocks for the gpu and memory for both cards and still the same freezing persists when lanuching COD4. During my stripdown and rebuild, I have tried COD4 with no sound card and the onboard sound disabled in BIOS from a fresh XP install. No luck. I havent used CoreCenter or LiveUpdate in a long time. I manually download the chipset files from the MSI site, unzip and install them. I have tried the drivers included with the motherboard, video cards, ATI site, MSI site all to no avail. I have tried the CCC drivers all the way back to 7.10. I just cannot get COD4 to launch anymore.

K9A Platinum and 4GB DDR2-800

I'm a major MSI fan and have been for a long time. My computers (even my customer's) are MSI boards.
Recently, I upgraded my motherboard, ram and processor to the new AM2 core (ok, not really new, but w/e). I have the following items:
MSI K9A Platinum
4GB DDR2 800 (2x2GB) G.Skill 5-5-5-15
Athlon X2 5200+ Windsor 65w w/2x1MB cache
2x ATI Radeon x1650 256 DDR2 (Crossfire'd)
1x 200GB SATA2
1x 300GB SATA2
2x 500GB SATA2
My previous system had:
MSI K8N Neo-4F
4x 1GB Kingston DDR 400
Athlon X2 4800+
Ok. So heres my problem:
I installed each 2GB stick into slot 1 to verify they work and I got all 2GB. Shut down and installed each 2GB at each channel (DIMM1 and DIMM3) and BIOS reports 2544MB total. I look in BIOS and it says Physical Memory = 4096MB, Usable Memory = 2544MB. (This is before I even installed windows.) So, I tried to see if windows would report differently and after installing, it reported the same 2.48GB of ram. Now I know that Windows 32-bit can only go up to 3.2GB and I have no problem with that. My previous setup reported all 4GB of ram... so whats different about this board that it doesn't use all the memory available?
If this is an issue with the Processor, then let me know. I paid for 4GB, not 2.5GB. I expected at most 3.2GB.
And no. I won't go Vista. And Windows x64 has little to no support for a lot of what I do/have. So I won't use it either.
Thanks for your help in advance.

@ BOSSKILLER:
I've done the single and dual vga test. I even placed the ram in single channel mode and it did the same.
@ Bas:
Its default. I'll paste it here.
Code: [Select]
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect /usepmtimer
Thanks for your responses so far.
Just for record, here is the RAM information taken from PC Wizard 2007 (From the makers of CPU-Z):
FYI: In the ram size, 2 ranks, 8 banks means its a double sided chip. 2 sides (1 rank per side), 8 chips (1 bank per chip) per side.
Code: [Select]
Information SPD EEPROM (DIMM0) :
Manufacturer : G Skill
Part Number : F2-6400CL5-2GBPQ
Serial Number : Unspecified
Type : DDR2-SDRAM PC2-6400 (399 MHz)
Format : Regular UDIMM (133.35 x 3)
Size : 2048 MB (2 ranks, 8 banks)
Module Buffered : No
Module Registered : No
Module EPP : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 0
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 0 of 2000
Supported Frequencies : 266 MHz, 400 MHz
CAS Latency (tCL) : 4 clocks @266 MHz, 5 clocks @400 MHz
RAS to CAS (tRCD) : 4 clocks @266 MHz, 5 clocks @400 MHz
RAS Precharge (tRP) : 4 clocks @266 MHz, 5 clocks @400 MHz
Cycle Time (tRAS) : 10 clocks @266 MHz, 15 clocks @400 MHz
Min TRC : 16 clocks @266 MHz, 23 clocks @400 MHz

MOVED: K9A Platinum + X1950 = SLOW!

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=111257.0

I'm quite happy I have so fast responce. It's very hard to find info about that. I learned to trust people at this forum beucase they help me to solve my problem with 4GB RAM. Nothing against you personally but did you seens this somwhere running or some test. Two pcs of H3870 will be quite expensive and I don't want to have than one pcs lie at shelf. Thanks
AMD 5200+ X2
4GB
K9A Pla
Enermax 500W
Vista Ultimate
Quote from: flobelix on 22-November-07, 16:39:07
Well, from what I understood in your post you want to crossfire two 3870 in a K9A Platinum. That's possible because it is a crossfire board and running two 3870 is just normal crossfire.
Spider or crossfire X is the able to run three or four vgas in triple/quad crossfire. That's of course not supported by K9A Plat. You would need a K9A2 Platinum which supports Crossfire X and has the necessary four PCIE Graphic slots.

K9A Platinum and DualCoreCenter

Asi there anyone who is able to run this SW on Vista x64 Ultimate on K9A Platinum? I had downloaded version 2.0.1.3. Installed and trying to get it working. At this forum in section of Intel based MB I found it work when .NET 3.0 is installed, so I enabled funcionality of .NET 3.0 in Vistas and also turn of WMI over SNMP. I still have same error, but now it take longer time to recieve this error. No application screen appear just error message after some time (20 sec.) Program CoreCell MFC Application stopped working.

Why bother?
There are far better ways of controlling the board.
E.g. fan speed, just enable smartfan in the BIOS and never look at it again.
As for C&Q just enable minimal energy in Vista and be done with it too.
Anything else?

K9A platinum and RX3870/3850 Series Graphics Card

RX3870/3850 Series Graphics Card are capable of CrossFireX, K9A Platinum have just CrossFire. I plan too later upgrade to K9APlatinum plus that suld support ADM Spider achritecture. Question is if I will buy in this time two pcs RX3870 will they run at K9A Platinum CrossFire or isn't supported ? Thanks for answer I bought full HD resolution LCD and my present x1950 is not enought for this res. so I need to upgrade. Thanks

I'm quite happy I have so fast responce. It's very hard to find info about that. I learned to trust people at this forum beucase they help me to solve my problem with 4GB RAM. Nothing against you personally but did you seens this somwhere running or some test. Two pcs of H3870 will be quite expensive and I don't want to have than one pcs lie at shelf. Thanks
AMD 5200+ X2
4GB
K9A Pla
Enermax 500W
Vista Ultimate
Quote from: flobelix on 22-November-07, 16:39:07
Well, from what I understood in your post you want to crossfire two 3870 in a K9A Platinum. That's possible because it is a crossfire board and running two 3870 is just normal crossfire.
Spider or crossfire X is the able to run three or four vgas in triple/quad crossfire. That's of course not supported by K9A Plat. You would need a K9A2 Platinum which supports Crossfire X and has the necessary four PCIE Graphic slots.

The answer to iTunes and Vista issues...

After waiting for weeks for Apple to listen to all the posts about Vista and iTunes issues, I decided I could not wait any longer. I went out and bought Anapod Explorer which syncs music, video and photos effortlessly with Vista. This proves onc and for all that the iTunes issues with Vista are indeed iTunes issues, and Apple should feel ashamed that they are not supporting the vast majority of iPod owners out there who use Windows not Mac.
In the end, it's Apple's loss as now I do not use iTunes at all so will never be able to use the iTunes store. All Windows users should vote with their feet and stop using iTunes until Apple respects them a little more and works quickly to fix issues with Vista support.
If a small company like Red Chair Software can develop a product that works so well with Vista, how come Apple can't? I recommend Anapod 200% and at $30 it is a bargain.

Yay! This works and thanks for the suggestion to use the backed-up .itl library.
The only glitch I got after it finally launched is that iTunes said my computer was not authorized to play tunes. I had to use my last 5 of 5 authorizations. I only have 3 computers, but I've had this glitch before. Hope I never get it again.
Thanks to the forum, and uh... no thanks to Apple!
G4 laptop; G3 desktop; Dell Mac OS X (10.4.7) Windows XP at work

K9A Platinum and Random reset Sata Channel

Hi all!
This board reset the pc in random mode and loose the HD Sata in next restart.
I can only turn off the pc, turn on and enter to the bios for 2-3 seconds and then restart the pc.
This is the only way for restart the PC when the problem is introduced.
I have try to change HD with Seagate - WD and Maxtor but it is not served to nothing.
Please help me!
This is my configuration:
K9A Platinum - AMD Athlon 5200 X2 - 2x1.0GB DDR2 800MHz Kingstone - ATI X1950XTX 512MB - 1 HD SATA II 200GB - 1 HD EIDE 160GB -
Powersupply LCpower Arkangel 850W - Soundcard Audigy 2 under WindowsXP SP2

do you use system stock(default) parameters?
check system for overheating, provide PSU details.
test memory with Memtest86

K9A platinum and USB power.

So, This Christmas I decided to give my HTPC a M-play 202 plus as a little nice extra feature.
It is a Display module with IR-receiver and remote, and it has the nice feature of Remote power-on. This of course achieved by routing the power-switch cable through it.
But, this of course requires that the M-play 202 has operating power in itself, through USB.
Now, I have 10 computers at home, including a few other MSI-boards, and while some of them do not by default provide USB-power when switched off, all of them either have BIOS-settings or a Motherboard jumperswitch for this. The K9A platinum has neither. The other motherboards that does not show settings for this all have power on USB as default.
So, What am I missing? Where is my USB-power when the computer are switched off?
I can solve this by changing the M-play 202 plus USB-cable from internal type to an external and simply route it through an powered USB2 hub. But this is a very ugly solution.
Anyway, just writing this in hopes that there is something obvious I am missing here that will solve this.
Best Regards
Bo Eriksson

Try sticky thread...power-on-usb keyboard....it might be what you need.

MOVED: K9A Platinum + Vista SATA Issues

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=108646.0

I have been having very similar issues with this board ever since they updated the MSI drivers in April. MSI says it cant be a driver/MoBo issue cause everyone would be calling in about it.
I think they are completely wrong and have a driver package that isn't working correctly...but thats just my opinion.
Anyway, have you tried installing in RAID 1?
This did not change the final outcome for me and I am stuck to Native IDE till I can pay for the shipping to have my board replaced. I spent way to long on the phone with agents blaming everything but the board (probably some new MSI policy cause they have never tried to pass this crap off on me b4), so I have tested everything else and still have dire issues when ever I am using a RAID set-up.
Question 2: What PSU are you running?
Make sure you are not overworking your PSU, as from what MSI told me, this can cause numerous errors and set-up issues.
Well, I hope some of this helped. Maybe it is a driver issue and just not enough people with this board have had to re-install since the new RAID driver was put up in April. Again, I never had problem one before then!!! Other than just basic help that is.

MOVED: K9A Platinum and Vista 64 issues

Similar Messages

Maybe you are looking for