MOVED: Killer Networks E2200 terrible Windows 8 Drivers (both from KN and MSI)

This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=163530.0

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation.  I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one  - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Similar Messages

  • Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

    Hey guys, how can i password protect my files in external hard drive? I want to access those files both from mac and windows PC!

    If you want a cross-platform solution that doesn't require the use of third-party software, use an external drive with hardware encryption. The device will have either a physical key or a numeric keypad. I don't have a specific recommendation.

  • I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

    I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs.

    Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.

    If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
    If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
    *Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
    *Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
    See "Import from another browser" and "Import from file":
    *http://kb.mozillazine.org/Import_bookmarks

  • I can hear sound both from headset and speakers

    I can hear sound both from headset and speakers even after i plug in the audio jack. so please help me in solving this query (windows 7)

    Hi @Pavithra,
    Welcome to the HP Support Forums! 
    I understand that you are having a problem with your speakers and headset working at the same time on your HP computer. To better guide you, could you please tell me the full model or product number of your computer. Here is a guide for How Do I Find My Model Number or Product Number?.
    Please let me know and I would be happy to help you with this.
    Thank you and have a great day!
    I worked on behalf of HP.

  • Am reinstalling creative suite 3 on new windows 7 install from XP and won't activate

    I Am reinstalling creative suite 3 on new windows 7 install from XP and it won't activate.  Phone number for activation no longer works just directs to website. Any ideas on getting it activated?

    Hi management-2,
    Welcome to the Adobe Forums,
    The best option would be upgarde to the present version as CS3 is not supported by Windows 7
    http://www.adobe.com/store/en_us/popup/software/creativesuite/mastercollection/systemreqs. html
    Regards
    Rajshree

  • I purchased FrameMaker 10.0 Windows Upgrade License from FM9 and I can't find the download for this.

    I purchased FrameMaker 10.0 Windows Upgrade License from FM9 and I can't find the download for this.

    Get in touch with support if it doesn't show up on your Adobe account.
    Mylenium

  • MSI Z87-G45 GAMING.. does the killer networking work with Windows 8.1?

    I was scrolling through the reviews for this board and someone mentioned in the reviews that the killer networking isnt supported with windows 8.1 yet.
    Is this still true or are there updated drivers for windows 8.1 now?
    Thanks.

    There is a driver posted on MSI's website for 8.1.
    http://www.msi.com/product/mb/Z87-G45-GAMING.html#download

  • Msi killer network e2200 problems

    Please help! I have a Msi apache laptop with the killer network manager. The network manager, when opened to the applications tab does not show any applications! I have reinstalled the driver and still doesn't work. Any suggestions?

    RX8 you are really good guy to help us, thanks for clear explain!
    Quote from: RX-8 on 07-January-15, 11:37:20
    Hello Joebunke,
    I borrowed an GE60 2PE too and had a clean-installed Windows 8.1.
    Then I installed all Windows 8.1 drivers from MSI website (http://www.msi.com/support/nb/GE60-2PE-Apache-Pro.html#down-driver).
    My application page works normally when I opened up and there're already some processes shown in the window.
    Did you mean it's all empty?
    Did you try selecting "Show All Applications" or "Reset Application Data"?

  • I have an old powerPC G4. dual 867 512 MB. my optical drive is having trouble reading my leopard installer.  I was going to try to use remote install but i don't have a network where I can connect both the mac and the windows laptop.  any suggestions?

    I'm just trying to revive my old PowerPC G4/ dual 867MHz 512MB.  Unfortunately I am unable to install from disc since my optical drive, although still working, is somehow not able to read the leopard installer.  I wanted to try the remote install option but have limited resources and don't have a network where I can have both the Mac desktop and windows laptop communicate.  I read somewhere that I can use a crossover cable to connect the two directly.  I'm still trying to see if I can get an external DVD-ROM as another option.  Any suggestions?

    Your Mac doesn't need a crossover cable, it auto-switches...
    http://support.apple.com/kb/HT2274
    But I have no idea how that will help you install from a Windows computer.
    If you get an external DVD drive it needs to be Firewire & Mac bootable.
    Other solution...
    http://support.apple.com/kb/HT2274

  • Can one network hard drive back up both a Mac and a PC?  What file system?

    We have both a Mac and a PC on our home network. I would like to use a network external drive to back them both up, instead of connecting each to its own external drive for backups. Iomega makes one, for example.
    The external drives I see advertised say that they are both Mac and PC compatible, but don't explicitly say that you can connect both at the same time. Can you?
    If so, what file system does the network drive use? Does it have a partition, one side with HFS for Mac and the other with NTFS for Windows? Is this really workable?
    And most importantly, will such a network drive work with TM?
    Confused,
    Barb

    I have a late 08 MackBook Pro and several Vista & XP machines. I currently backup the MBP and the primary Vista machine to a 1 TB drive attached via USB to an Airport Extreme router. No problems backing both up through the APE to the USB drive.
    The one thing I read when getting ready to set this up is that I should format the drive with the Apple file system, not one of the Microsoft file systems. I did (did it as an external drive off the MBP), and had no subsequent problems with Time Machine backups or Vista backups (using Acronis True Image).

  • Can I import both from NSTC and PAL cameras in one project?

    Hi there.
    I have a question.
    I am going to start on a project, a music video, and import video footage recorded from a SONY HVR-Z7U in America, that is 29.97fps NSTC.
    I'm also going to film in Europe, with a Canon HV30, that is PAL.
    So I wonder if there will be any problems importing both HD NSTC and HD PAL footage to a project? Or how should I do.
    I have already opened a 1080i30(60) HD project in CS4 and started playing with the NSTC footage. Is it correct?
    Thank you

    Why not shoot a trial clip in PAL and test it in your project?

  • When iPhoto imports both from Photostream and USB sync, how to select 'remove from iphone' source and avoid duplicates?

    Through observation, it appears/feels like Photostream is not only sync'ing as its own stream but (contrary to what I'd thought before) is also importing into my local iPhoto library.  Is this correct?  And yet, if I want to free up storage on my iPhone, I have found that the easiest, surest way is to sync by USB, select Import, and then Remove from Phone when it's done.  The confusion I have here, however, is that it seems that only the photos actually imported by USB sync are candidates for removal from my phone.
    If I have 500 photos, and let's say 200 photos have been photostream syncd, so when I go to Import, I select "Don't import duplicates" at the prompt, I think after Remove from Phone, I'll be left with 300 photos sitting on my iPhone.
    Is this all correct? What's the best/right way to do it so I never lose a photo or video and also don't clutter up my iPhoto?
    Thanks
    -Bronius

    Regarding iPhoto "also importing into my local iPhoto library" -- that is up to you and is controlled by a setting in the menu  iPhoto > Preferences > iCloud > Automatic Import.
    I have used both Photo Stream and the USB import method and find it easier to not use Photo Stream and just periodically do the USB import and immediately delete from the Camera Roll.
    Another option you may want to look at, if you just want to delete a number of pictures already imported in the past is Image Capture. It allows you to select photos on the phone (previously imported or not) and delete them without importing if desired.

  • My iPad keeps reverting to the home screen, both from Safari and Mail. ???

    My iPad keeps reverting to the home screen from Safari and Mail. ???

    Have you tried closing the two apps completely ? From the home screen (i.e. not with Safari or Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari and Mail apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • MOVED: Msi killer network e2200 problems

    This topic has been moved to GAMING Notebooks.
    https://forum-en.msi.com/index.php?topic=252087.0

    RX8 you are really good guy to help us, thanks for clear explain!
    Quote from: RX-8 on 07-January-15, 11:37:20
    Hello Joebunke,
    I borrowed an GE60 2PE too and had a clean-installed Windows 8.1.
    Then I installed all Windows 8.1 drivers from MSI website (http://www.msi.com/support/nb/GE60-2PE-Apache-Pro.html#down-driver).
    My application page works normally when I opened up and there're already some processes shown in the window.
    Did you mean it's all empty?
    Did you try selecting "Show All Applications" or "Reset Application Data"?

Maybe you are looking for