MOVED: L715-100 (1036) Notebook - wireless no-workie; media disconnected
This topic has been moved to Other MSI products.
https://forum-en.msi.com/index.php?topic=99448.0
Follow the link here or here
Similar Messages
-
Wireless not connected media disconnected
I have a Compaq presario with wireless & wired lan, running winXP sp2 and all latest updates. I have comcast connection, motorola modem, vonage phone, linksys router nr041 then a linksys wrt45gs wireless router. I have upgraded the firmware also. I can connect to the wired connection with no problems. I cannot connect to the wireless because I get the message "no connection". when I look in the ipconfig I see the message "media disconnected". Contacted linksys and tried their suggestions, the wireless router resetting, both router resets, both router and modem resets and no luck. I changed the settings to remove all security, disabled my firewall, changed the channel to every one from 1-11. Still no connection. Anyone got any new ideas?
My computer must be unique. I have a Broadcom. At any rate after trying for weeks I managed to get it running. I did so many things I am not sure what ones worked. What I do know is HP was the most helpful in solving the issue. After I downloaded a couple of helper files and a couple of upgrades, it popped right up there. I still need to secure it but I am going to enjoy what I have for a couple of days before I change anything. (Scared). I live in a rural area so not worried much about someone accessing it for a couple of days.
Thanks fall all the help. -
My wireless mouse often loses connection. I replace batteries and it works for a few days before becoming problematic again. Battery currently shows 100% and connection is lost intermittently. Bluetooth is on and wireless keyboard works. Any suggestions?
Is it possible that you have a bad bunch of batteries?
My Magic Mouse on one computer and the Mighty Mouse on another use batteries I bought through the Apple store (with a charger). They last a long time.
http://store.apple.com/us/product/MC500LL/A/apple-battery-charger
Another possiblity is that the mouse is defective. Since the keyboard connects, it has to be the mouse or the batteries. -
Wired and Wireless sometimes work (mostly not) after update.
So I have an issue with my network connection. It sometimes works, sometimes doesn't (mostly doesn't). This is for both wired and wireless. This started to happen a couple of days ago after an update. I had not updated for about a month prior. Prior to the update I used WICD and it worked just fine with no problems. I have no exotic hardware (ipw2200 using its firmware, dell xps gen2 notebook) and I set up everything about 6 months ago based on all the wikis. I have a dlink dir-825 router. Both wired and wireless connections work in windows every boot so it's not hardware.
I've included as much info as possible... sorry for the length.
Things I've tried:
Removing the ! from the INTERFACES=(!eth0 !eth1) in rc.conf
Removing netfs from the daemons
all the hostnames match in hosts and rc.conf
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="local"
USEDIRECTISA="no"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave cpufreq_conservative cpufreq_userspace fuse ipw2200)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="yes"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="stupendiousman"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(!eth0 !eth1)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal cpufreq wicd alsa crond fam bluetooth)
Here is my hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost stupendiousman
# End of file
Here is my mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
CRYPTO_MODULES="aes_generic aes_i586 dm_crypt xts"
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish. This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
# FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
# This setup specifies all modules in the MODULES setting above.
# No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
# This setup will autodetect all modules for your system and should
# work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
# This is identical to the above, except the old ide subsystem is
# used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
# This setup will generate a 'full' image which supports most systems.
# No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
# This setup assembles an pata raid array with an encrypted root FS.
# Note: See 'mkinitcpio -H raid' for more information on raid devices.
# HOOKS="base udev pata raid encrypt filesystems"
# This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata encrypt lvm2 resume filesystems firmware"
lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation NV41.9 [GeForce Go 6800 Ultra] (rev a2)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
ifconfig returns:
[rick@stupendiousman ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:F0:3E:CA:66
inet6 addr: fe80::212:f0ff:fe3e:ca66/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:4454 (4.3 Kb)
Interrupt:17 Base address:0x6000 Memory:dcfef000-dcfeffff
eth1 Link encap:Ethernet HWaddr 00:11:43:72:B5:96
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
If I do a iwlist scan I get:
[rick@stupendiousman ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 No scan results
eth1 Interface doesn't support scanning.
pan0 Interface doesn't support scanning.
Here is a portion of my /var/log/wicd/wicd.log
2009/08/15 09:19:29 :: ---------------------------
2009/08/15 09:19:29 :: wicd initializing...
2009/08/15 09:19:29 :: ---------------------------
2009/08/15 09:19:29 :: wicd is version 1.6.2 436
2009/08/15 09:19:29 :: setting backend to external
2009/08/15 09:19:29 :: trying to load backend external
2009/08/15 09:19:30 :: successfully loaded backend external
2009/08/15 09:19:30 :: trying to load backend external
2009/08/15 09:19:30 :: successfully loaded backend external
2009/08/15 09:19:30 :: Automatically detected wireless interface eth0
2009/08/15 09:19:30 :: setting wireless interface eth1
2009/08/15 09:19:30 :: automatically detected wired interface eth1
2009/08/15 09:19:30 :: setting wired interface eth0
2009/08/15 09:19:30 :: setting wpa driver wext
2009/08/15 09:19:30 :: setting use global dns to False
2009/08/15 09:19:30 :: setting global dns
2009/08/15 09:19:30 :: global dns servers are None None None
2009/08/15 09:19:30 :: domain is None
2009/08/15 09:19:30 :: search domain is None
2009/08/15 09:19:30 :: setting automatically reconnect when connection drops True
2009/08/15 09:19:30 :: Setting dhcp client to 0
2009/08/15 09:19:30 :: Wireless configuration file found...
2009/08/15 09:19:30 :: Wired configuration file found...
2009/08/15 09:19:30 :: chmoding configuration files 0600...
2009/08/15 09:19:30 :: chowning configuration files root:root...
2009/08/15 09:19:30 :: Using wireless interface...eth1
2009/08/15 09:19:30 :: Using wired interface...eth0
2009/08/15 09:19:36 :: Autoconnecting...
2009/08/15 09:19:39 :: Attempting to autoconnect with wired interface...
2009/08/15 09:19:39 :: Putting interface down
2009/08/15 09:19:39 :: Releasing DHCP leases...
2009/08/15 09:19:39 :: Setting false IP...
2009/08/15 09:19:39 :: Flushing the routing table...
2009/08/15 09:19:39 :: Putting interface up...
2009/08/15 09:19:39 :: Running DHCP
2009/08/15 09:19:39 :: dhcpcd: version 5.0.6 starting
2009/08/15 09:19:39 ::
2009/08/15 09:19:39 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 09:19:39 ::
2009/08/15 09:20:09 :: dhcpcd: timed out
2009/08/15 09:20:09 ::
2009/08/15 09:20:09 :: DHCP connection failed
2009/08/15 09:20:09 :: exiting connection thread
2009/08/15 09:20:11 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 09:20:11 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 09:20:11 :: Sending connection attempt result dhcp_failed
2009/08/15 09:21:03 :: trying to load backend ioctl
2009/08/15 09:21:03 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
2009/08/15 09:21:03 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
2009/08/15 09:21:03 :: trying to load backend external
2009/08/15 09:21:10 :: Putting interface down
2009/08/15 09:21:10 :: Releasing DHCP leases...
2009/08/15 09:21:10 :: Setting false IP...
2009/08/15 09:21:10 :: Flushing the routing table...
2009/08/15 09:21:10 :: Putting interface up...
2009/08/15 09:21:10 :: Running DHCP
2009/08/15 09:21:10 :: dhcpcd: version 5.0.6 starting
2009/08/15 09:21:10 ::
2009/08/15 09:21:10 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 09:21:10 ::
2009/08/15 09:21:40 :: dhcpcd: timed out
2009/08/15 09:21:40 ::
2009/08/15 09:21:40 :: DHCP connection failed
2009/08/15 09:21:40 :: exiting connection thread
2009/08/15 09:21:40 :: Sending connection attempt result dhcp_failed
2009/08/15 09:22:28 :: Putting interface down
2009/08/15 09:22:28 :: Releasing DHCP leases...
2009/08/15 09:22:28 :: Setting false IP...
2009/08/15 09:22:28 :: Flushing the routing table...
2009/08/15 09:22:28 :: Putting interface up...
2009/08/15 09:22:28 :: Running DHCP
2009/08/15 09:22:28 :: dhcpcd: version 5.0.6 starting
2009/08/15 09:22:28 ::
2009/08/15 09:22:28 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 09:22:28 ::
2009/08/15 09:22:58 :: dhcpcd: timed out
2009/08/15 09:22:58 ::
2009/08/15 09:22:58 :: DHCP connection failed
2009/08/15 09:22:58 :: exiting connection thread
2009/08/15 09:22:58 :: Sending connection attempt result dhcp_failed
2009/08/15 09:23:17 :: Daemon going down, killing wicd-monitor...
2009/08/15 09:23:17 :: Removing PID file...
2009/08/15 09:23:17 :: Shutting down...
2009/08/15 13:16:59 :: ---------------------------
2009/08/15 13:16:59 :: wicd initializing...
2009/08/15 13:16:59 :: ---------------------------
2009/08/15 13:16:59 :: wicd is version 1.6.2 436
2009/08/15 13:16:59 :: setting backend to external
2009/08/15 13:16:59 :: trying to load backend external
2009/08/15 13:17:00 :: successfully loaded backend external
2009/08/15 13:17:00 :: trying to load backend external
2009/08/15 13:17:00 :: successfully loaded backend external
2009/08/15 13:17:00 :: Automatically detected wireless interface eth0
2009/08/15 13:17:00 :: setting wireless interface eth1
2009/08/15 13:17:00 :: automatically detected wired interface eth1
2009/08/15 13:17:00 :: setting wired interface eth0
2009/08/15 13:17:00 :: setting wpa driver wext
2009/08/15 13:17:00 :: setting use global dns to False
2009/08/15 13:17:00 :: setting global dns
2009/08/15 13:17:00 :: global dns servers are None None None
2009/08/15 13:17:00 :: domain is None
2009/08/15 13:17:00 :: search domain is None
2009/08/15 13:17:00 :: setting automatically reconnect when connection drops True
2009/08/15 13:17:00 :: Setting dhcp client to 0
2009/08/15 13:17:00 :: Wireless configuration file found...
2009/08/15 13:17:00 :: Wired configuration file found...
2009/08/15 13:17:00 :: chmoding configuration files 0600...
2009/08/15 13:17:00 :: chowning configuration files root:root...
2009/08/15 13:17:00 :: Using wireless interface...eth1
2009/08/15 13:17:00 :: Using wired interface...eth0
2009/08/15 13:17:06 :: Autoconnecting...
2009/08/15 13:17:09 :: Attempting to autoconnect with wired interface...
2009/08/15 13:17:09 :: Putting interface down
2009/08/15 13:17:09 :: Releasing DHCP leases...
2009/08/15 13:17:09 :: Setting false IP...
2009/08/15 13:17:09 :: Flushing the routing table...
2009/08/15 13:17:09 :: Putting interface up...
2009/08/15 13:17:09 :: Running DHCP
2009/08/15 13:17:09 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:17:09 ::
2009/08/15 13:17:09 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:17:09 ::
2009/08/15 13:17:39 :: dhcpcd: timed out
2009/08/15 13:17:39 ::
2009/08/15 13:17:39 :: DHCP connection failed
2009/08/15 13:17:39 :: exiting connection thread
2009/08/15 13:17:41 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:17:41 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:17:41 :: Sending connection attempt result dhcp_failed
2009/08/15 13:18:10 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:18:10 :: Removing PID file...
2009/08/15 13:18:10 :: Shutting down...
2009/08/15 13:19:01 :: ---------------------------
2009/08/15 13:19:01 :: wicd initializing...
2009/08/15 13:19:01 :: ---------------------------
2009/08/15 13:19:01 :: wicd is version 1.6.2 436
2009/08/15 13:19:01 :: setting backend to external
2009/08/15 13:19:01 :: trying to load backend external
2009/08/15 13:19:02 :: successfully loaded backend external
2009/08/15 13:19:02 :: trying to load backend external
2009/08/15 13:19:02 :: successfully loaded backend external
2009/08/15 13:19:02 :: Automatically detected wireless interface eth0
2009/08/15 13:19:02 :: setting wireless interface eth1
2009/08/15 13:19:02 :: automatically detected wired interface eth1
2009/08/15 13:19:02 :: setting wired interface eth0
2009/08/15 13:19:02 :: setting wpa driver wext
2009/08/15 13:19:02 :: setting use global dns to False
2009/08/15 13:19:02 :: setting global dns
2009/08/15 13:19:02 :: global dns servers are None None None
2009/08/15 13:19:02 :: domain is None
2009/08/15 13:19:02 :: search domain is None
2009/08/15 13:19:02 :: setting automatically reconnect when connection drops True
2009/08/15 13:19:02 :: Setting dhcp client to 0
2009/08/15 13:19:02 :: Wireless configuration file found...
2009/08/15 13:19:02 :: Wired configuration file found...
2009/08/15 13:19:02 :: chmoding configuration files 0600...
2009/08/15 13:19:02 :: chowning configuration files root:root...
2009/08/15 13:19:02 :: Using wireless interface...eth1
2009/08/15 13:19:02 :: Using wired interface...eth0
2009/08/15 13:19:08 :: Autoconnecting...
2009/08/15 13:19:11 :: Attempting to autoconnect with wired interface...
2009/08/15 13:19:11 :: Putting interface down
2009/08/15 13:19:11 :: Releasing DHCP leases...
2009/08/15 13:19:11 :: Setting false IP...
2009/08/15 13:19:11 :: Flushing the routing table...
2009/08/15 13:19:11 :: Putting interface up...
2009/08/15 13:19:11 :: Running DHCP
2009/08/15 13:19:11 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:19:11 ::
2009/08/15 13:19:11 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:19:11 ::
2009/08/15 13:19:41 :: dhcpcd: timed out
2009/08/15 13:19:41 ::
2009/08/15 13:19:41 :: DHCP connection failed
2009/08/15 13:19:41 :: exiting connection thread
2009/08/15 13:19:43 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:19:43 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:19:43 :: Sending connection attempt result dhcp_failed
2009/08/15 13:30:36 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:30:36 :: Removing PID file...
2009/08/15 13:30:36 :: Shutting down...
2009/08/15 13:31:29 :: ---------------------------
2009/08/15 13:31:29 :: wicd initializing...
2009/08/15 13:31:29 :: ---------------------------
2009/08/15 13:31:29 :: wicd is version 1.6.2 436
2009/08/15 13:31:29 :: setting backend to external
2009/08/15 13:31:29 :: trying to load backend external
2009/08/15 13:31:30 :: successfully loaded backend external
2009/08/15 13:31:30 :: trying to load backend external
2009/08/15 13:31:30 :: successfully loaded backend external
2009/08/15 13:31:30 :: Automatically detected wireless interface eth0
2009/08/15 13:31:30 :: setting wireless interface eth1
2009/08/15 13:31:30 :: automatically detected wired interface eth1
2009/08/15 13:31:30 :: setting wired interface eth0
2009/08/15 13:31:30 :: setting wpa driver wext
2009/08/15 13:31:30 :: setting use global dns to False
2009/08/15 13:31:30 :: setting global dns
2009/08/15 13:31:30 :: global dns servers are None None None
2009/08/15 13:31:30 :: domain is None
2009/08/15 13:31:30 :: search domain is None
2009/08/15 13:31:30 :: setting automatically reconnect when connection drops True
2009/08/15 13:31:30 :: Setting dhcp client to 0
2009/08/15 13:31:30 :: Wireless configuration file found...
2009/08/15 13:31:30 :: Wired configuration file found...
2009/08/15 13:31:30 :: chmoding configuration files 0600...
2009/08/15 13:31:30 :: chowning configuration files root:root...
2009/08/15 13:31:30 :: Using wireless interface...eth1
2009/08/15 13:31:30 :: Using wired interface...eth0
2009/08/15 13:31:37 :: Autoconnecting...
2009/08/15 13:31:39 :: Attempting to autoconnect with wired interface...
2009/08/15 13:31:39 :: Putting interface down
2009/08/15 13:31:39 :: Releasing DHCP leases...
2009/08/15 13:31:39 :: Setting false IP...
2009/08/15 13:31:39 :: Flushing the routing table...
2009/08/15 13:31:39 :: Putting interface up...
2009/08/15 13:31:39 :: Running DHCP
2009/08/15 13:31:39 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:31:39 ::
2009/08/15 13:31:40 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:31:40 ::
2009/08/15 13:32:09 :: dhcpcd: timed out
2009/08/15 13:32:09 ::
2009/08/15 13:32:09 :: DHCP connection failed
2009/08/15 13:32:09 :: exiting connection thread
2009/08/15 13:32:12 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:32:12 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:32:12 :: Sending connection attempt result dhcp_failed
2009/08/15 13:38:00 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:38:00 :: Removing PID file...
2009/08/15 13:38:00 :: Shutting down...
2009/08/15 13:39:19 :: ---------------------------
2009/08/15 13:39:19 :: wicd initializing...
2009/08/15 13:39:19 :: ---------------------------
2009/08/15 13:39:19 :: wicd is version 1.6.2 436
2009/08/15 13:39:19 :: setting backend to external
2009/08/15 13:39:19 :: trying to load backend external
2009/08/15 13:39:20 :: successfully loaded backend external
2009/08/15 13:39:20 :: trying to load backend external
2009/08/15 13:39:20 :: successfully loaded backend external
2009/08/15 13:39:20 :: Automatically detected wireless interface eth0
2009/08/15 13:39:20 :: setting wireless interface eth1
2009/08/15 13:39:20 :: automatically detected wired interface eth1
2009/08/15 13:39:20 :: setting wired interface eth0
2009/08/15 13:39:20 :: setting wpa driver wext
2009/08/15 13:39:20 :: setting use global dns to False
2009/08/15 13:39:20 :: setting global dns
2009/08/15 13:39:20 :: global dns servers are None None None
2009/08/15 13:39:20 :: domain is None
2009/08/15 13:39:20 :: search domain is None
2009/08/15 13:39:20 :: setting automatically reconnect when connection drops True
2009/08/15 13:39:20 :: Setting dhcp client to 0
2009/08/15 13:39:20 :: Wireless configuration file found...
2009/08/15 13:39:20 :: Wired configuration file found...
2009/08/15 13:39:20 :: chmoding configuration files 0600...
2009/08/15 13:39:20 :: chowning configuration files root:root...
2009/08/15 13:39:20 :: Using wireless interface...eth1
2009/08/15 13:39:20 :: Using wired interface...eth0
2009/08/15 13:39:27 :: Autoconnecting...
2009/08/15 13:39:29 :: Attempting to autoconnect with wired interface...
2009/08/15 13:39:29 :: Putting interface down
2009/08/15 13:39:29 :: Releasing DHCP leases...
2009/08/15 13:39:29 :: Setting false IP...
2009/08/15 13:39:29 :: Flushing the routing table...
2009/08/15 13:39:29 :: Putting interface up...
2009/08/15 13:39:29 :: Running DHCP
2009/08/15 13:39:29 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:39:29 ::
2009/08/15 13:39:30 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:39:30 ::
2009/08/15 13:39:59 :: dhcpcd: timed out
2009/08/15 13:39:59 ::
2009/08/15 13:39:59 :: DHCP connection failed
2009/08/15 13:39:59 :: exiting connection thread
2009/08/15 13:40:02 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:40:02 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:40:02 :: Sending connection attempt result dhcp_failed
2009/08/15 13:45:10 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:45:10 :: Removing PID file...
2009/08/15 13:45:10 :: Shutting down...
2009/08/15 13:46:13 :: ---------------------------
2009/08/15 13:46:13 :: wicd initializing...
2009/08/15 13:46:13 :: ---------------------------
2009/08/15 13:46:13 :: wicd is version 1.6.2 436
2009/08/15 13:46:13 :: setting backend to external
2009/08/15 13:46:13 :: trying to load backend external
2009/08/15 13:46:14 :: successfully loaded backend external
2009/08/15 13:46:14 :: trying to load backend external
2009/08/15 13:46:14 :: successfully loaded backend external
2009/08/15 13:46:14 :: Automatically detected wireless interface eth1
2009/08/15 13:46:14 :: setting wireless interface eth1
2009/08/15 13:46:14 :: automatically detected wired interface eth0
2009/08/15 13:46:14 :: setting wired interface eth0
2009/08/15 13:46:14 :: setting wpa driver wext
2009/08/15 13:46:14 :: setting use global dns to False
2009/08/15 13:46:14 :: setting global dns
2009/08/15 13:46:14 :: global dns servers are None None None
2009/08/15 13:46:14 :: domain is None
2009/08/15 13:46:14 :: search domain is None
2009/08/15 13:46:14 :: setting automatically reconnect when connection drops True
2009/08/15 13:46:14 :: Setting dhcp client to 0
2009/08/15 13:46:14 :: Wireless configuration file found...
2009/08/15 13:46:14 :: Wired configuration file found...
2009/08/15 13:46:14 :: chmoding configuration files 0600...
2009/08/15 13:46:14 :: chowning configuration files root:root...
2009/08/15 13:46:14 :: Using wireless interface...eth1
2009/08/15 13:46:14 :: Using wired interface...eth0
2009/08/15 13:46:20 :: Autoconnecting...
2009/08/15 13:46:22 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:46:22 :: trying to automatically connect to...101
2009/08/15 13:46:22 :: Connecting to wireless network 101
2009/08/15 13:46:23 :: Putting interface down
2009/08/15 13:46:23 :: Releasing DHCP leases...
2009/08/15 13:46:23 :: Setting false IP...
2009/08/15 13:46:23 :: Stopping wpa_supplicant
2009/08/15 13:46:23 :: Flushing the routing table...
2009/08/15 13:46:23 :: Putting interface up...
2009/08/15 13:46:23 :: Generating psk...
2009/08/15 13:46:23 :: Attempting to authenticate...
2009/08/15 13:46:34 :: Running DHCP
2009/08/15 13:46:34 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:46:34 ::
2009/08/15 13:46:34 :: dhcpcd: eth1: broadcasting for a lease
2009/08/15 13:46:34 ::
2009/08/15 13:46:35 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:35 ::
2009/08/15 13:46:35 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:35 ::
2009/08/15 13:46:35 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:46:35 ::
2009/08/15 13:46:38 :: dhcpcd: eth1: carrier lost
2009/08/15 13:46:38 ::
2009/08/15 13:46:40 :: dhcpcd: eth1: carrier acquired
2009/08/15 13:46:40 ::
2009/08/15 13:46:40 :: dhcpcd: eth1: broadcasting for a lease
2009/08/15 13:46:40 ::
2009/08/15 13:46:45 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:45 ::
2009/08/15 13:46:45 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:46:45 ::
2009/08/15 13:46:45 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:46:45 ::
2009/08/15 13:46:51 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 13:46:51 ::
2009/08/15 13:46:51 :: dhcpcd: forking to background
2009/08/15 13:46:51 ::
2009/08/15 13:46:51 ::
2009/08/15 13:46:51 :: DHCP connection successful
2009/08/15 13:46:51 :: Connecting thread exiting.
2009/08/15 13:46:55 :: Sending connection attempt result Success
2009/08/15 13:48:50 :: Putting interface down
2009/08/15 13:48:50 :: Releasing DHCP leases...
2009/08/15 13:48:50 :: Setting false IP...
2009/08/15 13:48:51 :: Flushing the routing table...
2009/08/15 13:48:51 :: Putting interface up...
2009/08/15 13:48:51 :: Running DHCP
2009/08/15 13:48:51 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:48:51 ::
2009/08/15 13:48:51 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:48:51 ::
2009/08/15 13:48:51 :: dhcpcd: eth0: carrier lost
2009/08/15 13:48:51 ::
2009/08/15 13:48:53 :: dhcpcd: eth0: carrier acquired
2009/08/15 13:48:53 ::
2009/08/15 13:48:53 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:48:53 ::
2009/08/15 13:48:54 :: dhcpcd: eth0: offered 192.168.0.193 from 192.168.0.1
2009/08/15 13:48:54 ::
2009/08/15 13:48:54 :: dhcpcd: eth0: acknowledged 192.168.0.193 from 192.168.0.1
2009/08/15 13:48:54 ::
2009/08/15 13:48:54 :: dhcpcd: eth0: checking for 192.168.0.193
2009/08/15 13:48:54 ::
2009/08/15 13:49:00 :: dhcpcd: eth0: leased 192.168.0.193 for 86400 seconds
2009/08/15 13:49:00 ::
2009/08/15 13:49:00 :: dhcpcd: forking to background
2009/08/15 13:49:00 ::
2009/08/15 13:49:00 ::
2009/08/15 13:49:00 :: DHCP connection successful
2009/08/15 13:49:00 :: Connecting thread exiting.
2009/08/15 13:49:00 :: Sending connection attempt result Success
2009/08/15 13:53:46 :: Connecting to wireless network 102
2009/08/15 13:53:47 :: Putting interface down
2009/08/15 13:53:47 :: Releasing DHCP leases...
2009/08/15 13:53:47 :: Setting false IP...
2009/08/15 13:53:47 :: Stopping wpa_supplicant
2009/08/15 13:53:47 :: Flushing the routing table...
2009/08/15 13:53:47 :: Putting interface up...
2009/08/15 13:53:47 :: Generating psk...
2009/08/15 13:53:47 :: Attempting to authenticate...
2009/08/15 13:54:03 :: Running DHCP
2009/08/15 13:54:03 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:54:03 ::
2009/08/15 13:54:03 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 13:54:03 ::
2009/08/15 13:54:03 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:54:03 ::
2009/08/15 13:54:03 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:54:03 ::
2009/08/15 13:54:05 :: dhcpcd: eth1: carrier lost
2009/08/15 13:54:05 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: carrier acquired
2009/08/15 13:54:06 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 13:54:06 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 13:54:06 ::
2009/08/15 13:54:06 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 13:54:06 ::
2009/08/15 13:54:11 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 13:54:11 ::
2009/08/15 13:54:11 :: dhcpcd: forking to background
2009/08/15 13:54:11 ::
2009/08/15 13:54:11 ::
2009/08/15 13:54:11 :: DHCP connection successful
2009/08/15 13:54:11 :: Connecting thread exiting.
2009/08/15 13:54:11 :: Sending connection attempt result Success
2009/08/15 13:55:03 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:55:03 :: Removing PID file...
2009/08/15 13:55:03 :: Shutting down...
2009/08/15 13:55:52 :: ---------------------------
2009/08/15 13:55:52 :: wicd initializing...
2009/08/15 13:55:52 :: ---------------------------
2009/08/15 13:55:52 :: wicd is version 1.6.2 436
2009/08/15 13:55:52 :: setting backend to external
2009/08/15 13:55:52 :: trying to load backend external
2009/08/15 13:55:53 :: successfully loaded backend external
2009/08/15 13:55:53 :: trying to load backend external
2009/08/15 13:55:53 :: successfully loaded backend external
2009/08/15 13:55:53 :: Automatically detected wireless interface eth0
2009/08/15 13:55:53 :: setting wireless interface eth1
2009/08/15 13:55:53 :: automatically detected wired interface eth1
2009/08/15 13:55:53 :: setting wired interface eth0
2009/08/15 13:55:53 :: setting wpa driver wext
2009/08/15 13:55:53 :: setting use global dns to False
2009/08/15 13:55:53 :: setting global dns
2009/08/15 13:55:53 :: global dns servers are None None None
2009/08/15 13:55:53 :: domain is None
2009/08/15 13:55:53 :: search domain is None
2009/08/15 13:55:53 :: setting automatically reconnect when connection drops True
2009/08/15 13:55:53 :: Setting dhcp client to 0
2009/08/15 13:55:53 :: Wireless configuration file found...
2009/08/15 13:55:53 :: Wired configuration file found...
2009/08/15 13:55:53 :: chmoding configuration files 0600...
2009/08/15 13:55:53 :: chowning configuration files root:root...
2009/08/15 13:55:53 :: Using wireless interface...eth1
2009/08/15 13:55:53 :: Using wired interface...eth0
2009/08/15 13:55:59 :: Autoconnecting...
2009/08/15 13:56:02 :: Attempting to autoconnect with wired interface...
2009/08/15 13:56:02 :: Putting interface down
2009/08/15 13:56:02 :: Releasing DHCP leases...
2009/08/15 13:56:02 :: Setting false IP...
2009/08/15 13:56:02 :: Flushing the routing table...
2009/08/15 13:56:02 :: Putting interface up...
2009/08/15 13:56:02 :: Running DHCP
2009/08/15 13:56:02 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:56:02 ::
2009/08/15 13:56:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 13:56:02 ::
2009/08/15 13:56:12 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:56:12 ::
2009/08/15 13:56:32 :: dhcpcd: timed out
2009/08/15 13:56:32 ::
2009/08/15 13:56:32 :: DHCP connection failed
2009/08/15 13:56:32 :: exiting connection thread
2009/08/15 13:56:34 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:56:34 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:56:34 :: Sending connection attempt result dhcp_failed
2009/08/15 13:57:31 :: Daemon going down, killing wicd-monitor...
2009/08/15 13:57:31 :: Removing PID file...
2009/08/15 13:57:31 :: Shutting down...
2009/08/15 13:57:32 :: ---------------------------
2009/08/15 13:57:32 :: wicd initializing...
2009/08/15 13:57:32 :: ---------------------------
2009/08/15 13:57:32 :: wicd is version 1.6.2 436
2009/08/15 13:57:32 :: setting backend to external
2009/08/15 13:57:32 :: trying to load backend external
2009/08/15 13:57:32 :: successfully loaded backend external
2009/08/15 13:57:32 :: trying to load backend external
2009/08/15 13:57:32 :: successfully loaded backend external
2009/08/15 13:57:32 :: Automatically detected wireless interface eth0
2009/08/15 13:57:32 :: setting wireless interface eth1
2009/08/15 13:57:32 :: automatically detected wired interface eth1
2009/08/15 13:57:32 :: setting wired interface eth0
2009/08/15 13:57:32 :: setting wpa driver wext
2009/08/15 13:57:32 :: setting use global dns to False
2009/08/15 13:57:32 :: setting global dns
2009/08/15 13:57:32 :: global dns servers are None None None
2009/08/15 13:57:32 :: domain is None
2009/08/15 13:57:32 :: search domain is None
2009/08/15 13:57:32 :: setting automatically reconnect when connection drops True
2009/08/15 13:57:32 :: Setting dhcp client to 0
2009/08/15 13:57:32 :: Wireless configuration file found...
2009/08/15 13:57:32 :: Wired configuration file found...
2009/08/15 13:57:32 :: chmoding configuration files 0600...
2009/08/15 13:57:32 :: chowning configuration files root:root...
2009/08/15 13:57:32 :: Using wireless interface...eth1
2009/08/15 13:57:32 :: Using wired interface...eth0
2009/08/15 13:57:38 :: Autoconnecting...
2009/08/15 13:57:38 :: Putting interface down
2009/08/15 13:57:38 :: Attempting to autoconnect with wired interface...
2009/08/15 13:57:38 :: Releasing DHCP leases...
2009/08/15 13:57:38 :: Setting false IP...
2009/08/15 13:57:38 :: Flushing the routing table...
2009/08/15 13:57:38 :: Putting interface up...
2009/08/15 13:57:38 :: Running DHCP
2009/08/15 13:57:38 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:57:38 ::
2009/08/15 13:57:38 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 13:57:38 ::
2009/08/15 13:57:48 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:57:48 ::
2009/08/15 13:58:08 :: dhcpcd: timed out
2009/08/15 13:58:08 ::
2009/08/15 13:58:08 :: DHCP connection failed
2009/08/15 13:58:08 :: exiting connection thread
2009/08/15 13:58:08 :: Sending connection attempt result dhcp_failed
2009/08/15 13:58:10 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 13:58:10 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 13:58:46 :: Putting interface down
2009/08/15 13:58:46 :: Releasing DHCP leases...
2009/08/15 13:58:46 :: Setting false IP...
2009/08/15 13:58:46 :: Flushing the routing table...
2009/08/15 13:58:46 :: Putting interface up...
2009/08/15 13:58:46 :: Running DHCP
2009/08/15 13:58:46 :: dhcpcd: version 5.0.6 starting
2009/08/15 13:58:46 ::
2009/08/15 13:58:46 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 13:58:46 ::
2009/08/15 13:58:56 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 13:58:56 ::
2009/08/15 13:59:16 :: dhcpcd: timed out
2009/08/15 13:59:16 ::
2009/08/15 13:59:16 :: DHCP connection failed
2009/08/15 13:59:16 :: exiting connection thread
2009/08/15 13:59:16 :: Sending connection attempt result dhcp_failed
2009/08/15 14:10:08 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:10:08 :: Removing PID file...
2009/08/15 14:10:08 :: Shutting down...
2009/08/15 14:10:59 :: ---------------------------
2009/08/15 14:10:59 :: wicd initializing...
2009/08/15 14:10:59 :: ---------------------------
2009/08/15 14:10:59 :: wicd is version 1.6.2 436
2009/08/15 14:10:59 :: setting backend to external
2009/08/15 14:10:59 :: trying to load backend external
2009/08/15 14:10:59 :: successfully loaded backend external
2009/08/15 14:10:59 :: trying to load backend external
2009/08/15 14:10:59 :: successfully loaded backend external
2009/08/15 14:10:59 :: Automatically detected wireless interface eth0
2009/08/15 14:10:59 :: setting wireless interface eth1
2009/08/15 14:10:59 :: automatically detected wired interface eth1
2009/08/15 14:10:59 :: setting wired interface eth0
2009/08/15 14:10:59 :: setting wpa driver wext
2009/08/15 14:10:59 :: setting use global dns to False
2009/08/15 14:10:59 :: setting global dns
2009/08/15 14:10:59 :: global dns servers are None None None
2009/08/15 14:10:59 :: domain is None
2009/08/15 14:10:59 :: search domain is None
2009/08/15 14:10:59 :: setting automatically reconnect when connection drops True
2009/08/15 14:10:59 :: Setting dhcp client to 0
2009/08/15 14:10:59 :: Wireless configuration file found...
2009/08/15 14:10:59 :: Wired configuration file found...
2009/08/15 14:10:59 :: chmoding configuration files 0600...
2009/08/15 14:10:59 :: chowning configuration files root:root...
2009/08/15 14:10:59 :: Using wireless interface...eth1
2009/08/15 14:10:59 :: Using wired interface...eth0
2009/08/15 14:11:06 :: Autoconnecting...
2009/08/15 14:11:09 :: Attempting to autoconnect with wired interface...
2009/08/15 14:11:09 :: Putting interface down
2009/08/15 14:11:09 :: Releasing DHCP leases...
2009/08/15 14:11:09 :: Setting false IP...
2009/08/15 14:11:09 :: Flushing the routing table...
2009/08/15 14:11:09 :: Putting interface up...
2009/08/15 14:11:09 :: Running DHCP
2009/08/15 14:11:09 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:11:09 ::
2009/08/15 14:11:09 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 14:11:09 ::
2009/08/15 14:11:19 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 14:11:19 ::
2009/08/15 14:11:39 :: dhcpcd: timed out
2009/08/15 14:11:39 ::
2009/08/15 14:11:39 :: DHCP connection failed
2009/08/15 14:11:39 :: exiting connection thread
2009/08/15 14:11:41 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:11:41 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 14:11:41 :: Sending connection attempt result dhcp_failed
2009/08/15 14:13:00 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:13:00 :: Removing PID file...
2009/08/15 14:13:00 :: Shutting down...
2009/08/15 14:13:50 :: ---------------------------
2009/08/15 14:13:50 :: wicd initializing...
2009/08/15 14:13:50 :: ---------------------------
2009/08/15 14:13:50 :: wicd is version 1.6.2 436
2009/08/15 14:13:50 :: setting backend to external
2009/08/15 14:13:50 :: trying to load backend external
2009/08/15 14:13:50 :: successfully loaded backend external
2009/08/15 14:13:50 :: trying to load backend external
2009/08/15 14:13:50 :: successfully loaded backend external
2009/08/15 14:13:51 :: Automatically detected wireless interface eth1
2009/08/15 14:13:51 :: setting wireless interface eth1
2009/08/15 14:13:51 :: automatically detected wired interface eth0
2009/08/15 14:13:51 :: setting wired interface eth0
2009/08/15 14:13:51 :: setting wpa driver wext
2009/08/15 14:13:51 :: setting use global dns to False
2009/08/15 14:13:51 :: setting global dns
2009/08/15 14:13:51 :: global dns servers are None None None
2009/08/15 14:13:51 :: domain is None
2009/08/15 14:13:51 :: search domain is None
2009/08/15 14:13:51 :: setting automatically reconnect when connection drops True
2009/08/15 14:13:51 :: Setting dhcp client to 0
2009/08/15 14:13:51 :: Wireless configuration file found...
2009/08/15 14:13:51 :: Wired configuration file found...
2009/08/15 14:13:51 :: chmoding configuration files 0600...
2009/08/15 14:13:51 :: chowning configuration files root:root...
2009/08/15 14:13:51 :: Using wireless interface...eth1
2009/08/15 14:13:51 :: Using wired interface...eth0
2009/08/15 14:13:57 :: Autoconnecting...
2009/08/15 14:13:59 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:14:00 :: trying to automatically connect to...101
2009/08/15 14:14:00 :: Connecting to wireless network 101
2009/08/15 14:14:00 :: Putting interface down
2009/08/15 14:14:00 :: Releasing DHCP leases...
2009/08/15 14:14:00 :: Setting false IP...
2009/08/15 14:14:00 :: Stopping wpa_supplicant
2009/08/15 14:14:00 :: Flushing the routing table...
2009/08/15 14:14:00 :: Putting interface up...
2009/08/15 14:14:00 :: Generating psk...
2009/08/15 14:14:01 :: Attempting to authenticate...
2009/08/15 14:14:11 :: Running DHCP
2009/08/15 14:14:11 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:14:11 ::
2009/08/15 14:14:11 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 14:14:11 ::
2009/08/15 14:14:11 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 14:14:11 ::
2009/08/15 14:14:11 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 14:14:11 ::
2009/08/15 14:14:15 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 14:14:15 ::
2009/08/15 14:14:15 :: dhcpcd: forking to background
2009/08/15 14:14:15 ::
2009/08/15 14:14:15 ::
2009/08/15 14:14:15 :: DHCP connection successful
2009/08/15 14:14:15 :: Connecting thread exiting.
2009/08/15 14:14:17 :: Sending connection attempt result Success
2009/08/15 14:14:17 :: Autoconnecting...
2009/08/15 14:14:17 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:14:17 :: trying to automatically connect to...102
2009/08/15 14:14:17 :: Connecting to wireless network 102
2009/08/15 14:14:17 :: Putting interface down
2009/08/15 14:14:17 :: Releasing DHCP leases...
2009/08/15 14:14:18 :: Setting false IP...
2009/08/15 14:14:18 :: Stopping wpa_supplicant
2009/08/15 14:14:18 :: Flushing the routing table...
2009/08/15 14:14:18 :: Putting interface up...
2009/08/15 14:14:18 :: Generating psk...
2009/08/15 14:14:18 :: Attempting to authenticate...
2009/08/15 14:14:19 :: Running DHCP
2009/08/15 14:14:19 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:14:19 ::
2009/08/15 14:14:19 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
2009/08/15 14:14:19 ::
2009/08/15 14:14:19 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
2009/08/15 14:14:19 ::
2009/08/15 14:14:19 :: dhcpcd: eth1: checking for 192.168.0.183
2009/08/15 14:14:19 ::
2009/08/15 14:14:24 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
2009/08/15 14:14:24 ::
2009/08/15 14:14:24 :: dhcpcd: forking to background
2009/08/15 14:14:24 ::
2009/08/15 14:14:24 ::
2009/08/15 14:14:24 :: DHCP connection successful
2009/08/15 14:14:24 :: Connecting thread exiting.
2009/08/15 14:14:29 :: Sending connection attempt result Success
2009/08/15 14:15:02 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:15:02 :: Removing PID file...
2009/08/15 14:15:02 :: Shutting down...
2009/08/15 14:15:52 :: ---------------------------
2009/08/15 14:15:52 :: wicd initializing...
2009/08/15 14:15:52 :: ---------------------------
2009/08/15 14:15:52 :: wicd is version 1.6.2 436
2009/08/15 14:15:52 :: setting backend to external
2009/08/15 14:15:52 :: trying to load backend external
2009/08/15 14:15:52 :: successfully loaded backend external
2009/08/15 14:15:52 :: trying to load backend external
2009/08/15 14:15:52 :: successfully loaded backend external
2009/08/15 14:15:52 :: Automatically detected wireless interface eth0
2009/08/15 14:15:52 :: setting wireless interface eth1
2009/08/15 14:15:52 :: automatically detected wired interface eth1
2009/08/15 14:15:52 :: setting wired interface eth0
2009/08/15 14:15:52 :: setting wpa driver wext
2009/08/15 14:15:52 :: setting use global dns to False
2009/08/15 14:15:52 :: setting global dns
2009/08/15 14:15:52 :: global dns servers are None None None
2009/08/15 14:15:52 :: domain is None
2009/08/15 14:15:52 :: search domain is None
2009/08/15 14:15:52 :: setting automatically reconnect when connection drops True
2009/08/15 14:15:52 :: Setting dhcp client to 0
2009/08/15 14:15:52 :: Wireless configuration file found...
2009/08/15 14:15:52 :: Wired configuration file found...
2009/08/15 14:15:52 :: chmoding configuration files 0600...
2009/08/15 14:15:52 :: chowning configuration files root:root...
2009/08/15 14:15:52 :: Using wireless interface...eth1
2009/08/15 14:15:52 :: Using wired interface...eth0
2009/08/15 14:15:59 :: Autoconnecting...
2009/08/15 14:16:02 :: Attempting to autoconnect with wired interface...
2009/08/15 14:16:02 :: Putting interface down
2009/08/15 14:16:02 :: Releasing DHCP leases...
2009/08/15 14:16:02 :: Setting false IP...
2009/08/15 14:16:02 :: Flushing the routing table...
2009/08/15 14:16:02 :: Putting interface up...
2009/08/15 14:16:02 :: Running DHCP
2009/08/15 14:16:02 :: dhcpcd: version 5.0.6 starting
2009/08/15 14:16:02 ::
2009/08/15 14:16:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 14:16:02 ::
2009/08/15 14:16:12 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 14:16:12 ::
2009/08/15 14:16:32 :: dhcpcd: timed out
2009/08/15 14:16:32 ::
2009/08/15 14:16:32 :: DHCP connection failed
2009/08/15 14:16:32 :: exiting connection thread
2009/08/15 14:16:34 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 14:16:34 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 14:16:34 :: Sending connection attempt result dhcp_failed
2009/08/15 14:17:02 :: Daemon going down, killing wicd-monitor...
2009/08/15 14:17:02 :: Removing PID file...
2009/08/15 14:17:02 :: Shutting down...
2009/08/15 15:39:03 :: ---------------------------
2009/08/15 15:39:03 :: wicd initializing...
2009/08/15 15:39:03 :: ---------------------------
2009/08/15 15:39:03 :: wicd is version 1.6.2 436
2009/08/15 15:39:03 :: setting backend to external
2009/08/15 15:39:03 :: trying to load backend external
2009/08/15 15:39:03 :: successfully loaded backend external
2009/08/15 15:39:03 :: trying to load backend external
2009/08/15 15:39:03 :: successfully loaded backend external
2009/08/15 15:39:03 :: Automatically detected wireless interface eth0
2009/08/15 15:39:03 :: setting wireless interface eth1
2009/08/15 15:39:03 :: automatically detected wired interface eth1
2009/08/15 15:39:03 :: setting wired interface eth0
2009/08/15 15:39:03 :: setting wpa driver wext
2009/08/15 15:39:03 :: setting use global dns to False
2009/08/15 15:39:03 :: setting global dns
2009/08/15 15:39:03 :: global dns servers are None None None
2009/08/15 15:39:03 :: domain is None
2009/08/15 15:39:03 :: search domain is None
2009/08/15 15:39:03 :: setting automatically reconnect when connection drops True
2009/08/15 15:39:03 :: Setting dhcp client to 0
2009/08/15 15:39:03 :: Wireless configuration file found...
2009/08/15 15:39:03 :: Wired configuration file found...
2009/08/15 15:39:03 :: chmoding configuration files 0600...
2009/08/15 15:39:03 :: chowning configuration files root:root...
2009/08/15 15:39:03 :: Using wireless interface...eth1
2009/08/15 15:39:03 :: Using wired interface...eth0
2009/08/15 15:39:10 :: Autoconnecting...
2009/08/15 15:39:13 :: Attempting to autoconnect with wired interface...
2009/08/15 15:39:13 :: Putting interface down
2009/08/15 15:39:13 :: Releasing DHCP leases...
2009/08/15 15:39:13 :: Setting false IP...
2009/08/15 15:39:13 :: Flushing the routing table...
2009/08/15 15:39:13 :: Putting interface up...
2009/08/15 15:39:13 :: Running DHCP
2009/08/15 15:39:13 :: dhcpcd: version 5.0.6 starting
2009/08/15 15:39:13 ::
2009/08/15 15:39:13 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 15:39:13 ::
2009/08/15 15:39:23 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 15:39:23 ::
2009/08/15 15:39:43 :: dhcpcd: timed out
2009/08/15 15:39:43 ::
2009/08/15 15:39:43 :: DHCP connection failed
2009/08/15 15:39:43 :: exiting connection thread
2009/08/15 15:39:45 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 15:39:45 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 15:39:45 :: Sending connection attempt result dhcp_failed
2009/08/15 15:41:46 :: Daemon going down, killing wicd-monitor...
2009/08/15 15:41:46 :: Removing PID file...
2009/08/15 15:41:46 :: Shutting down...
2009/08/15 15:42:33 :: ---------------------------
2009/08/15 15:42:33 :: wicd initializing...
2009/08/15 15:42:33 :: ---------------------------
2009/08/15 15:42:33 :: wicd is version 1.6.2 436
2009/08/15 15:42:33 :: setting backend to external
2009/08/15 15:42:33 :: trying to load backend external
2009/08/15 15:42:33 :: successfully loaded backend external
2009/08/15 15:42:33 :: trying to load backend external
2009/08/15 15:42:33 :: successfully loaded backend external
2009/08/15 15:42:33 :: Automatically detected wireless interface eth0
2009/08/15 15:42:33 :: setting wireless interface eth1
2009/08/15 15:42:33 :: automatically detected wired interface eth1
2009/08/15 15:42:33 :: setting wired interface eth0
2009/08/15 15:42:33 :: setting wpa driver wext
2009/08/15 15:42:33 :: setting use global dns to False
2009/08/15 15:42:33 :: setting global dns
2009/08/15 15:42:33 :: global dns servers are None None None
2009/08/15 15:42:33 :: domain is None
2009/08/15 15:42:33 :: search domain is None
2009/08/15 15:42:33 :: setting automatically reconnect when connection drops True
2009/08/15 15:42:33 :: Setting dhcp client to 0
2009/08/15 15:42:33 :: Wireless configuration file found...
2009/08/15 15:42:33 :: Wired configuration file found...
2009/08/15 15:42:33 :: chmoding configuration files 0600...
2009/08/15 15:42:33 :: chowning configuration files root:root...
2009/08/15 15:42:33 :: Using wireless interface...eth1
2009/08/15 15:42:33 :: Using wired interface...eth0
2009/08/15 15:42:39 :: Autoconnecting...
2009/08/15 15:42:42 :: Attempting to autoconnect with wired interface...
2009/08/15 15:42:42 :: Putting interface down
2009/08/15 15:42:42 :: Releasing DHCP leases...
2009/08/15 15:42:42 :: Setting false IP...
2009/08/15 15:42:42 :: Flushing the routing table...
2009/08/15 15:42:42 :: Putting interface up...
2009/08/15 15:42:42 :: Running DHCP
2009/08/15 15:42:42 :: dhcpcd: version 5.0.6 starting
2009/08/15 15:42:42 ::
2009/08/15 15:42:42 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 15:42:42 ::
2009/08/15 15:42:52 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 15:42:52 ::
2009/08/15 15:43:12 :: dhcpcd: timed out
2009/08/15 15:43:12 ::
2009/08/15 15:43:12 :: DHCP connection failed
2009/08/15 15:43:12 :: exiting connection thread
2009/08/15 15:43:14 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 15:43:14 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 15:43:14 :: Sending connection attempt result dhcp_failed
2009/08/15 15:44:27 :: Daemon going down, killing wicd-monitor...
2009/08/15 15:44:27 :: Removing PID file...
2009/08/15 15:44:27 :: Shutting down...
2009/08/15 15:44:48 :: ---------------------------
2009/08/15 15:44:48 :: wicd initializing...
2009/08/15 15:44:48 :: ---------------------------
2009/08/15 15:44:48 :: wicd is version 1.6.2 436
2009/08/15 15:44:48 :: setting backend to external
2009/08/15 15:44:48 :: trying to load backend external
2009/08/15 15:44:48 :: successfully loaded backend external
2009/08/15 15:44:48 :: trying to load backend external
2009/08/15 15:44:48 :: successfully loaded backend external
2009/08/15 15:44:48 :: Automatically detected wireless interface eth0
2009/08/15 15:44:48 :: setting wireless interface eth1
2009/08/15 15:44:48 :: automatically detected wired interface eth1
2009/08/15 15:44:48 :: setting wired interface eth0
2009/08/15 15:44:48 :: setting wpa driver wext
2009/08/15 15:44:48 :: setting use global dns to False
2009/08/15 15:44:48 :: setting global dns
2009/08/15 15:44:48 :: global dns servers are None None None
2009/08/15 15:44:48 :: domain is None
2009/08/15 15:44:48 :: search domain is None
2009/08/15 15:44:48 :: setting automatically reconnect when connection drops True
2009/08/15 15:44:48 :: Setting dhcp client to 0
2009/08/15 15:44:48 :: Wireless configuration file found...
2009/08/15 15:44:48 :: Wired configuration file found...
2009/08/15 15:44:48 :: chmoding configuration files 0600...
2009/08/15 15:44:48 :: chowning configuration files root:root...
2009/08/15 15:44:48 :: Using wireless interface...eth1
2009/08/15 15:44:48 :: Using wired interface...eth0
2009/08/15 15:44:58 :: trying to load backend ioctl
2009/08/15 15:44:58 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
2009/08/15 15:44:58 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
2009/08/15 15:44:58 :: trying to load backend external
2009/08/15 15:45:57 :: Autoconnecting...
2009/08/15 15:45:57 :: Putting interface down
2009/08/15 15:45:57 :: Attempting to autoconnect with wired interface...
2009/08/15 15:45:57 :: Releasing DHCP leases...
2009/08/15 15:45:57 :: Setting false IP...
2009/08/15 15:45:57 :: Flushing the routing table...
2009/08/15 15:45:57 :: Putting interface up...
2009/08/15 15:45:57 :: Running DHCP
2009/08/15 15:45:57 :: dhcpcd: version 5.0.6 starting
2009/08/15 15:45:57 ::
2009/08/15 15:45:57 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
2009/08/15 15:45:57 ::
2009/08/15 15:46:07 :: dhcpcd: eth0: broadcasting for a lease
2009/08/15 15:46:07 ::
2009/08/15 15:46:27 :: dhcpcd: timed out
2009/08/15 15:46:27 ::
2009/08/15 15:46:27 :: DHCP connection failed
2009/08/15 15:46:27 :: exiting connection thread
2009/08/15 15:46:29 :: No wired connection present, attempting to autoconnect to wireless network
2009/08/15 15:46:29 :: Unable to autoconnect, you'll have to manually connect
2009/08/15 15:46:29 :: Sending connection attempt result dhcp_failedWas able to boot this weekend and did an update which updated the kernel. Rebooted and there was no network. Rebooted again and no network... rebooted again and... had network!? I tried changing wicd to use dhclient only and did the triple reboot test again and it didn't change anything... randomly working network... same with dhcpcd.
So it appears to be a dhcp timeout issue however it makes no sense because before the update a couple weeks ago it was working every time with no hiccup. Am I not providing enough information that will aid in anyone helping me figure this out? -
Hp laserjet p1102w: wireless not working: unable to change to new network
I just moved and established a new wireless network to which I want to connect my printer.
I have followed instructions on HP's websites. All goes well until I attempt to open "html config..." on the printer utility screen. nothing happens after selecting "html config...".
printer works fine if connected via usb; doesnt work wirelessly from laptop, iphone or ipad. I would like to continue to use the laserjet wirelessly.
any suggestions are appreciated!"OK let's try this again. What is the make and model numbers of all you network equipment? How is everything connected? OS of computers? Please explain."
Make & model #:
printer: hp laserjet p1102w
cable modem: arris dg860
I am printing from a macbookpro (OS X 10.6.8), iphone 5c and an ipad.
the wireless printing worked just fine from the laptop, my iphone and ipad while at my previous address where I shared a wifi with roommates. I now have my own wifi via cable (tv) that has a different name than the previous wifi.
this printer currently only prints via USB. the wireless printing doesnt work from any device.
messages:
laptop: printer offline
iphone: no airprint printers found
ipad: no airprint printers found -
Can't get wireless to work at home
I've just set up my wireless at my shop, using the wireless G w/speedbooster router, and notebook card, this is in a laptop. Now at home I have just a wireless G router. I tried to plug in the notebook card to the laptop and can't get any connection at home. I tried to set up the router and when I did this, I lost all connection to the internet. I then called SBC out ISP, and they helped me to get the internet back, but I still couldn't get the wireless to work. I didn't really want to mess around with it any more, because my wife needs the internet for her work at home, so i'm not really sure what to do. Do you guys think I should just call technical support when I get home and have them walk me through it all?
message that says windows unable to find certificate to log me on
-
Wireless contection working but connection on main computer not working
I was using my main computer last night and walked away from it for about 15 minutes. When I came back it said there wasn't a connection to the internet and couldn't find one. I restarted the router and computer but it did not help. The connection does however work on my internet. Any suggestions?
mrsjolivas wrote:
Right now I can't download anything from the internet since my connection isn't working.
You said wireless is working, right? Use that, if it is on a different computer download it there, put it on a flash drive, install on the one that won't communicate. But first...
Lets go back to basics.
On the "main" (wired?) computer, can you communicate from the PC to the router? Open your browser, type in 192.168.1.1 in the address bar and hit enter.
Do you see the router login screen? If so, you are talking to the router, and the problem is inside the router or beyond it (which is unlikely since you said the wireless works).
No? Then you aren't even talking to the router, try a Network Connection repair on the PC and see if that fixes it. And check to make sure the ethernet cable between your computer and the router is still correctly plugged in, and try moving it to a different port on the router.
Hope this helps. If not, please tell us more about your entire configuration (PCs, other things like TV STBs, brand of router, any customization you may have done on the router, etc). It is hard for anyone to help in an information vacuum.
Justin
Verizon FiOS TV, Internet, and phone
QIP6416, IMG 1.6.2, Build 08.58
Keller, TX 76248 -
C540 wireless not working (horrible customer warranty support)
Just spent the last 3 hours of my life doing 1) on a call with tech support unable to troubleshoot wireless networking 2)getting disconnected TWICE with no call backs even though you have my number 3) unable to call back into the system all lines are busy and no way to connect online with support to restablish the connection.
If you can read this. I'm absolutely disappointed with the level and mechanisms for support.
Please contact me Lenovo. Otherwise, I'm never buying a Lenovo product again. Also, I will affirmatively tell my friends and family of my experience if this is not resolved.
This thing is brand new, and there should be a systemic way to troubleshoot wireless networking.
PLEASE CONTACT ME LENOVOif you are out of warrenty the two phone options you have are 49.99 per incident or 99$ for a year of phone support. this does not cover hardware. if you wish for free support, here, or hp email or hp live chat can assist you.
I can assist you here. First, check in device manager to see if your system sees the wireless card.
Click start
click control panel
click classic view (link on the left)
open device manager
click the arrow or + sign in front of 'network adapters'
list what you see here
Signature:
I currently work on behalf of HP for numerous support departments. The opinions expressed above are the personal opinions of myself, not of HP. There is no guarantee that the opinions expressed are 100% correct. -
Wireless not working for my Netgear router
i have had my iBook G3 for about 3 years now and the wireless has worked fine up untill a few weeks ago when i moved up to Santa Barbara for school. We have a NetGear wireless router in the houes with one pc hooked up to it and 2 laptops that have wireless. my iBook is the only laptop that will not connect to the Netgear. we have a password on the wireless and when i put it in it says "there was an error joining the selected AirPort network." I know the Wireless is working fine on my computer because when i take it to school it will pick up the wireless and work fine there. is there someone that can please help me?
Taylor,
You've posted in the "Using your PowerBook G4 15-inch Aluminum" forum area. You might be better posting in a forum area that deals with Internet and Networking. However, you need to make sure the router accepts your wireless b signal and you've typed in the correct password (to the letter - upper and lower). -
What wireless card works well with Arch?
Hello there
I recently finished building my quad-core (yay!) pc and because I don't want to run a long ethernet cable across the house, I was wondering if you guys knew any wireless cards I could use for my desktop (PCI/PCI-Express) that would work well with arch. I'd prefer to order it over the internet, and don't want to spend more than $100 (tax/shipping included). I know there was an earlier thread about this, but I didn't want to revive it and I also had some "requirements" in which I pick out. All help is appreciated
Last edited by itsbrad212 (2010-03-23 03:30:35)655321 wrote:
Atheros Wireless cards work great on linux, I searched some on amazon for you there are some very good picks. They have extended range also
http://www.amazon.com/s/ref=nb_sb_noss? … ci&x=0&y=0
Thanks I'll have a look at those. I have had great experiences with atheros cards on my laptop so hopefully these will act the same
Last edited by itsbrad212 (2010-03-23 04:54:58) -
WRT54G Wireless not working - Wired is fine
You may have seen my last post, where I asked how to set up static IPs within my little network and do a couple other things - thanks for the advice, everything seemed to work great.
BUT I'm not getting wireless to work. I don't think this is a product of my changes, as 1) I haven't been using wireless in the past and 2) I tried changing things back and trying (as a control) and still had the same problem.
Running a WRT54G router, hardwired to three computers (each which also has wireless capabilities). For freedom from wires, tried switching over to wireless. I disabled the "wired" adapters to prevent any interference, and turned on the wireless ones (linksys notebook G adapters and a G pci adapter).
I had the "wired" adapters set up for static IPs within the 10-20 range (192.168.1.10[to 20]). This worked fine. I switched my routers IP to something else, still works. Turn on MAC filtering, and added all six MAC addresses, still good. Then I tried to configure the wireless adapters for static IP like I did the "wired", and used them and got nothing. Tried pinging the router from the comps, and the comps from the router - 1005 packet loss. Went back and set up the adatpers to DHCP (which is still enabled on the router) and still not getting a connection. Tried no encryption, WEP and WPA2 PSK - not working.
My only thought is, I detect like literally 20-25 networks in my area (I live in NYC in a apartment). I can detect my network's SSID, and signal strength is perfect (it should be, all comptuers are within 30 feet of each other ) but when I try to connect, I get the waiting/status bar for like five minutes and then nothing. Are there settings I can use to help optimize my network to deal with all the interference? Are there other troubleshooting things I should try? My last trip here for advice turned out really well - appreciate your help.hi , You can try a few things here...specially since you have so many wireless networks around you.
bring up network connections, right click on the wireless network connecting and bring up properties...select the wireless networks tab and remove all networks from under "preferred networks".....once done , add your network.You can specify the encryption keys under the association/authentication tab. One more thing,under the preferred networks , you have an advanced button....hit that and select the 2nd option...
on the router you can try and change the beacon to 50 and reduce the RTS and fragmentation threshold by 40 each...these are found under the advanced wireless settings. -
WRT1900AC 2.4 Ghz Wireless Stopped Working (5Ghz works fine)
After months of trouble free use on both 2.4 and 5 Ghz wireless networks - suddenly nothing can connect to the 2.4 Ghz network.
Some history:
We have lots of wireless devices both old and new from iPhone to printers etc. etc... Most run on G, some N and now some AC). For the initial setup of the WRT1900AC, I enabled both wireless networks with the same SSID, password etc. All devices connected but our AC devices didn't get the full wireless speed available – I believe they were all connecting to the 2Ghz network. After a couple of weeks, I created a new xxx_5 wireless network and set the faster devices to connect to it... All was well for a couple months...
Current problem:
On November 2, 2014 all devices connected to the 2.4 ghz network failed to connect. I know the exact time and date because
I was on a business trip and had to take the family “tech support” call from the road
Devices which rely on the network for email all have emails from 11.2.2014 and nothing after
This is totally bizarre as all was working well with nothing changing as far as I know.
Current setting:
Firmware Version – 1.1.8.161917
2.4 Ghz Network
Network – Enabled
Network name – xxxx_2
Network Mode – Mixed
Security mode – WPA2/WPA Mixed Personal
Channel Width – Auto
Channel – Auto
Broadcast SSID – Enabled
5 Ghz Network
Network – Enabled
Network name – xxxx_5
Network Mode – Mixed
Security mode – WPA2/WPA Mixed Personal
Channel Width – Auto
Channel – Auto
Broadcast SSID - Enabled
What I’ve done to troubleshoot
Rebooted all devices (repeatedly)
Cycled through almost all settings on the 2.4 ghz (while leaving the 5ghz network alone)
Removed all security
Cycled through all network modes (could not connect with old or new devices)
Changed Channel width to 20Mhz
Cycled through all Channels
Wired networking works.
I called Linksys technical support and they wanted to charge me a 1 time or 6 month tech support fee. They thought it was a simple configuration issue… what am I missing?Was a Factory Reset performed before and after any firmware updates then set up from scratch?
What wireless modes are you using?
2.4Ghz Routers only: Try single mode G or N or mixed G and N?
2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz?
Channel Width set for Auto 20/40Mhz or try 20Mhz only.
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
What wireless devices do you have connected?
Ensure any devices with WiFi adapter drivers are updated.
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
WMM Support must be enabled for single wireless N mode to function.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&articleid=5471
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-esse...
I recommend doing the following: Download the FW file from the support site first.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
This user seems to have helped his router work better:
https://community.linksys.com/t5/Wireless-Routers/WRT1900AC-Sudden-Disconnects/m-p/891693#M288123
sd_james wrote:
I also have this problem. Firmware: 1.1.8.164461
In fact, I've had a device try and rejoin the network and when entering the password, I get a wrong password reply.
When I reset the router it recovers and devices connect. -
When I click on the iTunes ikon I get a box pop up which reads Problem with shortcut. The item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.
My computer which is a packard bell vista operating system, recently stopped working as the power supply overheated and blew up and it has recently been sent back to the Know How team at PC world and it seems to be since it came back I now cannot open iTunes. I have also tried to search for iTunes in the search bar, I can see several files, but can't seem to open any of these either. I think that quicktime isn't working, either.
I have over 4000 songs in iTunes that I had recorded from my collectiong of CD's am going to loose all these now? Can anyone help, with very easy instructions as I really don't know what I am doing??
ThanksI would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...
-
how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.
Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool. -
How can i get my wireless to work on my printer hp officejet pro 8600
how can i get my wireless to work on my printer hp officejet pro 8600
You'll get faster help w/this question by posting it in the Wireless forum...here:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/bd-p/Networking
I am an HP employee.
Maybe you are looking for
-
Can Apple tv connect thru a satelite receiver and not a tv
I have an older projection HDTV Mitusubishi big screen TV model # WS55909 that doesn't have an HDMI connection on it but connected to the TV are two Direct TV HDTV satellite receiver DVR's (models 20-700 & 21-100) that do have an HDMI output as well
-
Hello , I am new to Visual Composer and installed Netweaver Composition Environment ...and want to start using the Visual Composer Tool to create Models...how can I do that....while installing NWCE i had 2 options for scenario as Java Application ser
-
Bind a list element to a java ArrayList
Hello, I have: static ArrayList<String> myListwhich I declared static in class A. I try to bind the items in a JavaFX ListBox to A.myList, so that whenever the content of myList changes, the items in the JavaFX ListBox change too. How can this be don
-
Have a new p6-2100 desktop that I'm trying to add a 1 serial port and 1 Parallel port
Installed Win7 Ultimate and attempted to plug in a 3rd party PCI Express car with ports. The computer does not boot if this card is in the pci slot. (Port card Mfr StarTech.
-
Where do i see the results for dbms_ddl.analyze_object?
hi All I executed the following procedure begin dbms_ddl.analyze_object('TABLE','OPS$MBPCONT1','IKS_STORAGE_SIGNED_CARDS','COMPUTE'); end; And it executed successfully with result PL/SQL procedure successfully completed. Could you please let me know