Moved library to new hard drive, iPod no longer communicates

Ok, I am computer savy but know next to nothing about iTunes as I don't use it, but my wife does use it. However, my wife is not computer savy.
My wife's old hard drive started dying (on a Dell laptop), so we bought a new one and moved all her files over. However, she now has 2 problems:
(1) She cannot use any of the old music files. I read around online, and I have discovered that we need to consolidate the old files from the old HD into a flash drive using the iTunes consolidate library function. Then they can be imported to the new library on the new computer. This is doable as the old drive is not yet completely dead.
(2) However, she has since purchased/downloaded new songs out of the iTunes store onto the new HD, and thus I need to keep the new HD's library intact or we'll lose the files. *Now the big problem: her iPod will not connect to the new iTunes library.* I assume this is because iPods sync with a particular library, not a particular computer, and the library of the old computer was not properly transferred. Thus there is a new library, that contains songs we don't want to lose, but we can't connect the iPod.
Please help! How do we transfer the old "library" settings that allow the iPod to be synced without completely deleting the existing library on the new hard drive?
Thanks.
OS is Windows 7 and new HD's iTunes version is 10.0.0.68.
Message was edited by: bagman27

RS
How did you go about this move?
The correct way to do it is
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you still have the original library it might be worth trying again.
Regards
TD

Similar Messages

  • Have found multiple iTunes Library.xml files. Moved Library to new Hard Drive and it needs to be completely rebuilt?

    Hello. I have a Mac Mini operating Mac OS X 10.7.2. I recently had to move my iTunes Library to a new hard drive. I followed the directions on how to move the library and refind everything yet when I do so what comes up is a mere skeleton of what I had. I have had to hunt down my purchased Apps, Music and Movies and re-add them to the library. I also noticed in doing this I have multiple iTunes Library.xml files ... shouldn't there only be one?  If so how do I clean this up without doing any accidental damage (i.e. how do I find the one that is being used and delete the rest?)?  If I delete the others is there any risk of losing purchased content? Lastly syncing my iPads has become a nightmare as I get the "This iPad is currently synced to another iTunes library" message. Obviously something

    It's hard for me to picture the exact situation. It sounds like you still have your library file on the internal but some files on the external, and maybe some on the internal, some of which are in the library and others not...  By re-adding things after consolidating it may have made things into a hodge-podge. Yes, that article you referenced says: "iTunes for Mac: Moving your iTunes Media folder"with Media Folder being the emphasis.  You probably should have just moved your whole iTunes folder.  Still, moving the media folder as instructed should not have messed up the library.  Did you make the mistake of starting up iTunes before the external drive had mounted fully and it then told you it couldn't find many files?  How you proceed to sort it out will depend upon how much time you want to spend and how important things such as ratings and playcount are to you.  I have not actually used the consolidate feature across different drives myself (and don't feel inclined to do so here to test ).
    If you are in the USA you can download some previous purhcases with iCloud, but not all.
    Here's a bit on what an iTunes folder should look like:
    What are the iTunes library files? - [http://support.apple.com/kb/HT1660]
    More on iTunes library files and what they do - [http://en.wikipedia.org/wiki/ITunes#Media_management]
    Library files with graphic and explanation of different iTunes versions - http://discussions.apple.com/message.jspa?messageID=13169517
    Once you get iTunes working off the external drive it should just put new media to the external when you add it.
    I have almost no experience with synching (I synched my neice's iPod, once, about 4 years ago).

  • Moved library to new hard drive, now nothing shows in iTunes

    I moved my library to a new internal hard drive, but the music does not show when I start up iTunes. I followed the instructions from the Apple website, so I don't know what to do. I can see the files on the new hard drive, so I know they are still around. I'm afraid to sync as I may lose everything. What do I do?
    VAIO PCV-RZ24G   Windows XP  

    First - re-read all the instructions and figure out where you might have dropped a step. Below are three similar sites that explain the same process. One may help you diagnose what went wrong.
    My guess is that you moved or corrupted your Library database file in the process. But without more information, I am just taking a shot in the dark.
    See these links for some step-by-step info:
    iLounge: Moving your iTunes Library to a New Hard Drive
    MacMuse: iTfW: Move iTunes music/Library to new drive
    iTunes: Moving your iTunes Music folder

  • Moved Library to extenal hard drive - can't drag songs to Ipod

    I moved my library from my hard drive to an external drive. Everything seems to be working fine, but I can't drag songs to my Ipod. Suggestions?

    Update
    I was able to solve my problem. If anyone comes across the issue I was trying to fix, I suggest trying to move the files from WITHIN lightroom.
    Originally I had used my OS to move my picture folders onto an external hard drive, by just click and drag. Lightroom was not able to keep the editing I had done on those pictures after they were moved. I restored a backup on my Mac and put the folders back to their original location. Then within the lightroom program, I was able to move the picture folders (with their edits) onto my external hard drive.
    Julieanne Kost had a helpful video http://tv.adobe.com/watch/adobe-evangelists-julieanne-kost/questions-about-lightroom-and-p hoto-management/

  • I moved iTunes and library to new Hard drive M: , now Sync is lost. Need to collect files and rebuild to proper folder.

    I installed a new hard drive and partitioned it into 2, P: Pictures: and M: Music: . I moved all my iTunes Files and Folders to the M: drive. Then when I connected my iPhone4 to iTunes it asked if I wanted to create a new sync, I said no but I seemed it couldn't find my old sync file. So I searched my computer for files and folders of iTunes and placed them all into a iTunes folder on the root of M: drive. I need to rebuild the iTunes folder correctly.
    I have all the correct items on my iPhone and haven't lost anything. Its just a problem trying to sync. Biggest problem is my music. When I try to sync music there is trouble. I can't seen to remove all music from iPhone and resync. When I thought I did iTunes would say no more music will fit. (Music is normally 70% of my memory on phone and I try and leave 1GB of 16GB free on it).
    I wan't to build the iTunes install on the D:\Program Files (x64)\  since I don't install anything on my SSD drive C: except Windows 7.

    How exactly did you move the files or more specifically, what did you move?
    The correct way to move the iTunes files is to move the ENTIRE iTunes folder (or copy it) from the original location to the new location.
    Once moved, hold Shift while launching iTunes and point it to the new location.
    If anything other than the ENTIRE iTunes folder was moved, it needs to be put back in the original location to correct the issues created then moved correctly.

  • ITunes moved to a new hard drive, now acting like a newly installed program

    I just moved my ITunes to an external hard drive and followed all the directions to do so (did a google search and it lead me to this site where I followed the instructions outlined). Now ITunes won't work, it won't access any music whatsoever. In fact when I open ITunes it's appearance is that of the freshly installed program and no songs at all come up under music
    I decided I had to have the space because I only have an 80 GB drive (C) and my music files occupy 52 GB of that (ITunes accounts for 2/3 of that 52GB total for some strange reason)
    The new hard drive (F) is an HP Simple Save and that program backed up all my C drive information (including ITunes).
    Then I followed the instructions I found on this site. I went in, identified the new folder, consolidated the files and nothing. When I restarted ITunes I got the screen above
    So I tried putting ITunes back on the C drive and reset ITunes using the reset button under "Edit, Preferences, Advanced" and that still doesn't work. Not to mention I now have ITunes buried under a mountain of sub folders
    I am at my wits end with ITunes. My first IPod was a gift (my seond I had to buy after washing my first)  but ITunes has been nothing but trouble the whole time and now this!!!!!!!
    Can someone please help me????????????? I like my IPod, I on't want to have to get rid of it and buy an MP3 player that works with Windows

    My Library files are still on the C drive as the instructions said to leave them there
    While it is implied that I can move ITunes music files off my C drive to make more space
    Quote: "If your hard drive is nearly full after loading all your music and other media into iTunes, or if you just want to move all those music and media files to another hard drive on your system, here's a way to make the move while retaining all your playlists, ratings, and play history."
    In fact I now see that ITunes Help seems to suggest something different. I got here by pressing the question mark while in the pop up box for "Edit, Preferences, Advanced"
    Quote:
    "By default, songs and other files you import into iTunes are placed here:
    My Documents/My Music/iTunes/iTunes Media
    Hide
    To change the default location of imported files:
    Choose Edit > Preferences, and click Advanced.
    Click Change and select a new location for your files.
    From now on, new songs and other items you import are stored in the new location. Songs you’ve already imported stay in their current location. (emphasis mine)
    To restore the iTunes Media folder as the default storage location, click Reset (in the Advanced pane of iTunes preferences)."

  • Move itunes library to new hard drive

    ok i recently got a new harddrive because i ran out of space on my old one. i have started everything over fresh and i want to take EVERYTHING from my old iTunes and put it on my new harddrive. One thing i have tried is taking the itunes>music folder and copied onto my ipod (enable disk use) and then put it on my new hard drive. well my problem is that i dont have the same number of items and its missing all of the ratings and play counts and any of the small details like "skip during shuffle". another problem is that all of my videos are under the movie category, which will take me forever to organize. please help me because i really do not want to organize my whole library again

    Then you want to clone your original HD to the new HD. See below - same concept as moving between two computers, you just do it between two HDs on the same PC..
    How to Copy and Move your Music Files from One Computer to Another
    This is the conceptual framework with related and important links. Apply and adapt it to your specific situation and equipment resources.
    The safest, quickest, and most optimal method to move your Library to a new computer is to actually clone the entire ‘iTunes’ folder (directory) structure, rather than just copying just the song files. By copying the entire ‘iTunes’ folder and all sub-folders, you capture not only the music files, but the all-important ‘iTunes Library.itl’ database file (usually located in the ‘iTunes’ folder), which contains all the data about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). See: What are the iTunes Library files?
    Install iTunes on the new computer. Then go back to your old computer and move (copy) the "iTunes" folder which usually resides inside your "…\My Documents\My Music" folder from the old computer to the exact same place (both Drive Letter and complete Path) on the new computer. When you open iTunes on the new computer it will look and behave exactly the same way it did on the old, Play Counts, Ratings, Comments and all!
    NOTE: It is usually safer moving files between computers with the same version of iTunes!!
    iTunes Files to Copy and Move to your New PC
    1) All music files in their current folder structure (usually located in and under the ‘iTunes Music’ folder)
    2) The Library database file: ‘iTunes Library.itl’ located in the ‘iTunes’ folder
    3) The Library XML file: ‘iTunes Music Library.xml’ located in the ‘iTunes’ folder
    4) Any XML playlist files you created for Playlist retention
    5) The two iTunes.pref files (optional)
    -- C:\Documents and Settings\<your username>\Application Data\Apple Computer\iTunes\iTunes.pref
    -- C:\Documents and Settings\<your username>\Local Settings\Application Data\Apple Computer Inc\iTunes.pref
    6) The XML file of Ratings, Play Counts and Last Played attributes saved from the main Library and created by Otto’s SaveRatings script (also optional, but recommended):
    “Download this: http://ottodestruct.com/itunes/SaveRatings.zip . It's a program, just run it like any other program. Run it on the machine where you're copying the info from BEFORE you move the files to the new machine. Click the "Save Ratings" button and it'll create a ratings.xml file. Now when you move the files, move the program and this file as well. Then after you make your new iTunes library, run it again and click the "Restore Ratings" button. Voila, all your information is back in the Library. Well, most of it anyway, it's not perfect. It'll tell you what songs it couldn't figure out though, and there's usually not very many.”
    Here's a list of methods to copy and move your music files from one computer to another:
    1) Use an External Hard Drive (ExHD) to move the complete files and Folder structures from one computer to another (my preferred option). You can clone’ the entire ‘iTunes’ folder structure in one very easy step. Also great to have available for complete backups of your Library. External hard drives now run less than $100 for 200-250GBs of storage. See This Link
    2) Directly connect the two computers....
    - 2a) Connect them through a Router &/or Network
    - 2b) Directly connect using an Ethernet cable: Straight for using at least one Mac; or Crossover for PC/PC Instructions here.
    - 2c) Connect them via a USB-to-USB Network Bridge. Example here. There are various types out there (use Google).
    ....Then copy the files from one computer to the other.
    3) Use the iPod as a transfer device, as this extensive Apple link explains. It will be a bit easier if your iPod has a larger capacity than your music collection, otherwise you will need to perform multiple copy/move transfers. This well written process also works fine while using any other data transfer medium (ExHD, Flash Drive, DVD, CD, Zipp, Jazz, etc.).
    4) Burn several DVDs (at 4.7GBs each) with your music data files and folder structure, and load them onto the new computer. Re-writable DVDs are more cost effective (if your DVD drive can manage these types).
    5) Burn 6x more on CDs (at 700MB each) than in #4 above and load the files and folders on the new computer. Re-writable CDs are more cost effective (if your CD drive can manage these types).
    6) Use a larger USB Flash drive (1GB - 4GB) to move the files and folders. Best if the flash drive is larger than your Library, otherwise you will need multiple copy/move transfers.
    These are links to various additional instructions on performing the transfer (read them all, but some listed steps may not be required depending on your specific situation):
    Switch from PC to Mac Using the iPod
    hudgie: Migrating iTunes for Windows to a new PC
    How to copy music between authorized computers

  • Transferring Itunes data and Library to new hard-drive question

    Hello,
    First I want to state that I made a mistake when I transferred my music to a new bigger harddrive. My bad.
    I look here for some guidance, I read this article after the fact: http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive so it was too late for me and I got these "!" signs on all my song. I have over 5000 songs (not including podcasts, movie and TV shows.
    I tried to move my library (succesfully) in my new hard drive so I could keep my laptop clean of all music.
    I though I will be clever and replace the target links into the "Itunes Library.xml" and "Itunes music Library.xml" files. Well not so clever because I still have the issue.
    My question: Does anybody knows what else should be done to fix this issue (if fixable)? I would try to avoid linking all my music one at the time by using the "locate" function that ITunes pop up when you try to start a song.
    It is also too bad that you must do it one song at the time, I calculated that if I do 20 songs a day it's going to take me 250 days and more...
    Thanks for any idea/solutions you may have
    Thierry

    I though I will be clever and replace the target links into the "Itunes Library.xml" and "Itunes music Library.xml" files. Well not so clever because I still have the issue.
    iTunes does not use these files.
    They are created only for other apps to access the iTunes library.
    Does anybody knows what else should be done to fix this issue (if fixable)?
    See this -> iTunes Track CPR v1.3
    "This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx). Any correct files found will be added to iTunes and will replace the "dead track" in each playlist it appears in (except Smart Playlists). Most tag data will also be rescued."

  • Itunes won't play library on new hard drive

    I had to install new hard drive.  Moved all itunes files over including library.  Downloaded latest version of Itunes, but it won't play any of my music.

    This is relevant portion of the support document with a bit of editing for clarity.
    If iTunes is running, quit iTunes.
    Using a Mac click the icon to open iTunes and immediately press and continue to hold down the Option key.
    You should see the following screen:
    If iTunes opens normally, close it and try again.
    Once you've got that dialog you have two options. If your previous iTunes library database is stored on the external drive use Choose Library to browse to it and open it. If you only have the media folder on the drive then use the Create Library option to create a new iTunes library at /iTunes on the external, move the media folder to /iTunes/iTunes Media and then add it to your new empty library.
    tt2

  • Moving library from one hard drive to another in same PC

    Just to let you all know right from the top that I've been trying to work with Apple's own info on this before coming here, this is the page I've been consulting:
    support.apple.com/kb/HT1364
    Okay, so here's the background: I just bought a new tower computer and I made sure that there was an empty bay available for a 2nd hard drive.  What I wanted to do was move the hard drive from my old computer into this second bay and have it availble (in the near term, before I reformat it) to move data in the new computer from the old drive to the new one.
    The second drive was installed, I can read from it and write to it, so there's no problem with that install..it's done and it works. 
    But I have not been able to find online exactly how to move as much of my previous data (music files, playlists, artwork) as possible from the old drive to the new drive (where I have a fresh install of the newest i-Tunes).  On the page referenced above, everything "tracks" right down through Step 8.  But at Step 9...I don't see any of that,  When I open File > Library I don't see either Organize Library or Consolidate Library.  In fact, the only two choices I see after File > Library are Tune On Home Sharing and Get Album Artwork. 
    So I'm stuck right there. What should I do next to move this info to the new hard drive *and* to a place where iTunes wants to find it?  I should be clear here that I do not simply want to *point* iTunes to the old drive and current location of the library, since the goal is to ultimately get everything from that drive that I need and then reformat it. 
    Any suggestions?
    P.S. BTW, the new computer is running Windows 7.  My profile shows XP because that was the OS on the old computer.

    Thanks so much for the information! I have started following your steps...but might be momentarily hung on one thing:
    As I mentioned, I had already done a fresh install of iTunes on the new hard drive.  As a result, under Users > Dave > My Music there was already a folder called "iTunes" there.  And the folder on my old hard drive that you wanted me to copy -- the one that contained everything (music, artwork, games, etc) -- is also called "iTunes".  So I realized I might get an error message with that, about how there's already a folder in that directory with that name, etc..
    Since I had only installed the new copy of iTunes and hadn't downloaded anything new or done anything with it, I figured I should probably just uninstall it.  Then, after doing that, I copied over all those files and folders...and those copies now reside on the new hard drive.  Problem is, I now don't have an app to run.
    So...should I have left the new install in place and just put the old "iTunes" folder (and contents) at, say, another level?  Or...since I've now copied all those files into the place where I thought iTunes would expect to find them, what would happen if I installed iTunes all over again?  Will it know what to do with the iTunes folder now already there?
    Dave

  • Switching music library to new hard drive

    Hi.
    I recently bought a new external hard drive and transferred all of my music onto it from my old external hard drive. I'd like to change the music folder location to the new hard drive. My question is this: if I change it to the new hard drive, will the playlists be lost? I exported the library, but I think if I import it after changing the folder location that there will be double the songs in the library, but only half of them will be valid and I'd rather not have to go through all my songs and delete the ones that aren't found. Or will the library not be imported at all because it's a new location?
    Long and confusing question, but I've probably just made it too complicated in my head. If anyone can offer me some advice, I would greatly appreciate it.
    Thanks in advance.

    If you want to move your library to an external location, do it this way.
    Copy the entire iTunes folder over to the new external hard drive (not just the iTunes Music folder you find inside it). Once copied then use these instructions to open the library from its new location...
    How to open an alternate iTunes Library file or create a new one
    http://docs.info.apple.com/article.html?artnum=304447
    That's it. Nothing else to do. Just start using the library from its new location. Just make sure the external is always powered up and mounted before opening iTunes. If you start iTunes and the external is not on, it will default back to the internal drive location for anything added to the library. You may not notice it for a while and find a bunch of your stuff is spread across the external and the internal drive. You would then have to change the preference back to the external drive location and do a Consolidate library command to correct.
    Patrick

  • How do I transfer itunes library to new hard drive running lion os

    I have a Mac Pro with 2 hard drives in it.
    Hard drive #1 has Leopard OS and my iTunes library on it
    Hard drive #2 has Lion 10.7.4 OS and this is where I want to move my iTunes library to from hard drive #1.
    How can I due this insuring that all playlists, etc. transfer seamlessly.  I will then only be using the new Lion OS
    to run iTunes (and this will also communicate with Apple TV, etc.)
    Thanks!

    Copy the entire /Music/iTunes/ folder from old hard drive to /Music/ on new hard drive.
    Start iTunes.
    That is all.
    You can also leave it where it it, hold Option, launch iTunes.
    Slect Choose library... and select the iTunes folder on the Leopard drive.
    This will be your iTunes for both OS, whichever you boot into.

  • Moved music to new hard drive now itunes can't find songs !

    This is what I did. My old hard drive was getting full so I bought an additional hard drive and installed it. I then selected all the music in the itunes music folder, copied it, then pasted it into a new folder on the new hard drive. I changed the settings in itunes to direct to the new hard drive. All the music i put in there now has exclamation points next to it and can't access the music? Help. I'm desperate....

    Different problem. - probably same answer. Yesterday I started iTunes and I had exclamation points on about 20 of my tunes. I re-linked them all manually. I am new to iTunes but I believe I am beginning to understand that unless all the sources are in one library they 'may' get unlinked from time to time. I am going to assume that all of your tunes are linked to a source that no longer exists. So they are all now unlinked.
    What I would like to know is how to restore those links. I am going to make another assumtion. Since I believe that iTunes loaded most of them when I first started using iTunes, there is a way to force it to do that again. I have no problem with putting all of my tunes in one library. I know that others have posted the desire to store and link tunes in multiple libraries, and there is a Consoldiate Option that says it will consolidate all of your tunes into one libary. It doesn't work. So how do you force iTunes to relink your files, in or out of the same library?

  • New Hard Drive- Ipod not recognized anymore

    I just have a quick question about my new nano so if anyone has any idea then that would be a big help.
    My MacBook was having problems last week and I had to have a new Hard Drive installed in it. Now none of my programs are set up anymore and nothing is installed. My ipod doesn't have an installation disk with it and the first time I plugged it into my computer I registered it, named it and put songs on it. Now when I plug it into my computer with the new hard drive it says that i cannot move or copy songs onto it because I am not authorized on this computer. Anyone have idea idea what I could do? I have the case with the serial number still if that will do anything but I've been having a lot of problems this week because nothing is installed anymore on my computer. Thanks!

    *My ipod doesn't have an installation disk with it and the first time I plugged it into my computer I registered it, named it and put songs on it.*
    You don't need a disc you just need to download and install the latest iTunes: Get the latest iPod software updates.
    *Now when I plug it into my computer with the new hard drive it says that i cannot move or copy songs onto it because I am not authorized on this computer.*
    Have you reauthorised your computer since you installed the new hard drive? If your system crashes or you reinstall your operating system without deauthorising iTunes first, you lock out one of your 5 authorisations. If you haven't already done so, you need to authorise you computer again to play your purchases: About iTunes Music Store Authorisation and Deauthorisation

  • Problems with copying iPhoto library onto new hard drive from external HELP

    I had to get a new hard drive installed onto my MacBook Pro, but was able to copy my iPhoto library onto my external hard drive via another computer before the old hard drive failed. Now, I am trying to copy that library back onto my MacBook.
    After I copied the library onto the MacBook, when iPhoto was opened, it showed no photos but I could see album titles. Then when I opened iPhoto while holding down the option key, it was all clumped into one event and not nearly all of the photos were there. Also, I have right-clicked on the library to see package contents and everything seems to be there, but I don't know how to make it all show up in the library.
    I've downloaded iPhoto Library Manager because I thought that might help (but haven't used it yet -- don't know how) and I just need some help to recover my iPhoto library... and is there a way to restore all the separate events imported and time/date stamps, in order to get all the photos in chronological order?

    Should I just go through the iPhoto Library package contents and drag every folder into iPhoto?
    No. That will get you massive duplication.
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

Maybe you are looking for

  • Output video via firewire/ilink?

    I just got a new Sony TV and of course it features their "ilink" aka a firewire 400 6pin input and I was wondering if there is anyway to have my powerbook output audio and video via its firewire port because it would be slightly better quality then S

  • Validations in SSHR Transfer Request

    Hello Gurus, I would like to restrict the Managers to do Transfer of employee effective first day of any month. I thought that user hook of assignment will help, it helps but not in user friendly manner and not on the first page of transfer request,

  • Using a Netapp and NFS

    I did some searches and in the past it sounded like the use of NFS wasn't recommended. Has this stance changed in the latest releases of the Sun Messaging Server? The reason I ask is because I currently rely on NFS with our current email system to di

  • Feature request for pacman-archstats

    We often find people asking questions which is the best x software, which is the most popular y soft, and stuff like that. Voting can be a good solution for this at least people will know which is the most popular one. Aurbuild has this feature where

  • Several invoices in single PDF (for print)..

    Hello experts, I have this issue.. I am generating invoices massively through WebDynpro Java, we need those invoices in their print format, so far I can put one invoice document per PDF, but it is non practical for the volume of generated invoices to