MOVED: Lost Wifi adapter after upgrading win8 to win8 pro!

This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=177255.0

You should be using the "Best for Display" settings for ordinary displays, like the ones you are using.
Only wacky huge displays, where the pixels are way too small (like retina Displays or 4K displays) use "Scaled" resolutions, and they do multiple unstated tricks: Graphics are displayed at the full native resolution of the display, and text is doubled or scaled so that it is extra-big -- otherwise it would be so tiny you could not read it.
So ignore "scaled" and use "best for Display".
And as far as having seventeen different resolution settings, well they figured out that if you paid for the top resolution, that "best for display" is what you almost always wanted, so why bother even showing the others.

Similar Messages

Lost wifi sensitivity after upgrade

I live in a fairly large house. Since I upgraded to 3.0 on my iphone 3g, in areas that were marginal before, I have no reception from my Dlink 655 router.
Anyone else experiencing this?

Yep, same here. I posted similar thread today. This is totally crap.
Anyone else have a solution or do we have to wait for the next upgrade?

WIFI Quit after upgrade to firmware 3.1.

My WIFI quit after upgrading from 2.1.1 to 3.1. It worked twice since the upgrade for a period of an hour or so. I have tried to reset the network, All settings, serveral reinstallation of the firmware. I also Tried to manually enter in my WIFI information, with no success. I tried everything. I can see wifi information when I go into the general settings>About> Wi-Fi Adress 00:1c:b3:48:ce..... My warrenty is no longer valid. Any suggestions???

I've now posted these changes at two other WiFi threads. Try these Settings changes:
The Setting changes are:
Fetch New Data > Push: Off
Fetch settings are set to Manual & in Advanced all is set to Manual.
My iPhone also lost WiFi but with the changes above it now connects though it takes a bit longer to find the signal. No longer have Push but WiFi is more important, to me anyway. Another iPhone user had success with the above changes.
Good luck.

I lost my contacts after upgrading to IOS6 on iPhone 4

I lost my contacts after upgrading to IOS6 on iPhone 4

At the most inconveient time possible(vaca) after downloading ICloud, All my phone contacts disappeared :( Wishing I knew how to uninstall to the way my phone was before.I leave in 4days.

Has anybody lost imported photos after upgrading to Lion? (iphoto11)

Has anybody lost imported photos after upgrading to Lion? (iphoto11)

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

HP P1006 DOES NOT PRINT after upgrading to a Macbook Pro 15 i7

HP P1006 does not work after upgrading to a Macbook Pro 15 i7 2,6 with Mac OS 10.6.3
I have used Time Machine to migrate from my previous MBP 15 C2D.
I've tried to remove the printer in system pref. and install it again.
The installer works fine but close to the end of the installation a new app is starting: HP Laserjet Firmware Update Utility, which won't start and just stays jumping at the dock, although the HP Installer succeeds to finish installing.
So when i try to print, the printer stays idle.
I have tried to download the installer from HP official website. Same story.
Also tried to do Permission Repair in Disk Utility
Please, if anyone knows a solution, help!

After the 4th try of Installing the software it finally worked!
Thanks anyway!

B460 lost WiFi adaptor after Win 7 professional upgrade??

Got a new B460, WiFi once worked in Win 7 home but after upgrade to Win 7 professional, I can no longer see anything related to WiFi, i.e. when I press Fn+F5, I only see the "bluetooth" icon (hardware button on), and also under Device Manager -> Network adaptors, there's only the Gigabit Ethernet Controller. Wired connection works fine, just that everything associated with WiFi seems to be lost. Anyone any clue?? Anyone can help? Appreciated very much!

let me ask that, if you don't have any disk, how come did you upgrade your operation system?
run one key theater to burn recovery disks so you can use.
or just shut down your computer and press one key recover button to perform clean windows installation.
you can download drivers from here ( check your d volume for drivers )

Lost Developer Toolbar after upgrade from 4.1 to 4.2

After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
Have others run into this with the upgrade or fresh installation of 4.2.1?
If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
{message:id=10692572}
Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
Here are the preferences that exist on our other instances but are null on the problem instance:
APEX_4_1_0_PATCH_12920544
APEX_4_2_0_PATCH_14777994
APP_EXPORT_TO_DB_ENABLED
HPROF_DIRECTORY
INSTANCE_ID
MOBILE_DEVELOPMENT_ENABLED
PRINT_SVR_HOST
PRINT_SVR_PORT
PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
Any advice is welcome.
Skip

Thanks, Joel.
You inspired me to take a closer look, and look beyond the upgrade.
After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
2. Remove workspace (PVA_AH9_R12)
3. (drop the parsing schema, xxpva, and related tablespace)
4. (create tablespace and schema user, xxpva)
5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
Does this suggest anything else I should look into?
Do you think I should post this as a new problem/question with more detail about the sequence of events?
Skip

ICal has lost all events after upgrade to 10.8.3.

iCal has lost all events and calendars except for birthdays after upgrade to 10.8.3. If I sync to my iPhone, will it wipe them from the phone, or will it get the events from the phone?
I have Time Machine working, but am unsure how to restore calendars from it.
PLEASE HELP.

Not sure why you think having to re-authorize would indicate an incompatibility or problem with their software unless you meant you have to keep re-authorizing the plugin?
Some plugins need re-authorization when you change a certain file or files in your system.. or if the file structure itself changes.. or the drive is renamed for example.. It could simply be that IK used a different form of authorization routine to their other plugins or versions of their plugins, with Amplitude 2.... Nothing to do with an incompatibility...or problems.
Anyhow I am happy you got the matter resolved and yes, random bursts of white noise is a classic sign of a plugin running in demo mode and needing authorization or re-authorisation as I suspected in your case.

WiFi problem after upgrading to Windows 8.1

So I have this problem since November 2013 after updating to 8 to 8.1
Right after updating to 8 to 8.1, all of a sudden my wifi stops working. I used my old Belkin external wifi usb drive and now I'm able to get the internet going.
However if I disconnect my Belkin usb I no longer get the internet because the wifi adapter that came with the H520 Desktop no longer works. I went through the device manager and under properties it tells me, 'Device not working properly' however it is up to date.
Anybody else had this problem and had it fixed?
Solved!
Go to Solution.

hi dudameister,
Thanks for Posting!
Open Device Manager and uninstall the WLAN 802.11 driver
"Place a check on the Delete driver software for this device "
the hit on scan for Hardware Changes
Delete the driver again until it does not show you a check box for deleting driver software
then Restart the computer.
Now install this
Realtek 8188EE Wifi
Then try reconnecting again.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

What can I do to restore good wifi reception after upgrading Snow Leopard

My situation is similar to what is described by others, but different enough that I thought starting a new thread might help. I upgraded from Leopard to Snow Leopard (10.6.3) in January. All was good. As new upgrades came out I conscientiously updated my software. Then about 4-6 weeks ago I noticed that I could not get wireless in some areas of my house, further from my router, where I used to able to get fine reception, and where other computers in the house still worked fine. The other computers are a MacBook Pro (running 10.6.8 but now just updated to Lion) and an iBook G4 (10.4.11). I also noticed that when I streamed video it was choppy, even if I used an ethernet cable.
I decided to reinstall from the CD (10.6.3) and that worked; all internet was back to normal. Then I updated to 10.6.8. Problem came back immediately. Reinstalled 10.6.3 and all was normal. Upgraded to 10.6.4 still normal. Updated to 10.6.5 problem back. Went back to 10.6.3 and back to normal.
I have tried repairing permissions and some of the other suggestions I have found here, but nothing works. The only way to get decent wifi reception throughout my house is to go back to the CD and reinstall. I see lots of people saying that after upgrading to later versions of Snow Leopard they lose wireless, but no one says they just lose wireless at greater distances from the router. I am using a Westell 327W ADSL modem router (802.11g) and I am connecting to the internet on Verizon DSL.
I would like to upgrade to Lion but I heard that this does not help with the Wifi issues others have reported, so would like to get this sorted out before upgrading.
Please help.

The solution given by Tenortim fixed my problem. Thank you Tenortim
https://discussions.apple.com/message/12924009#12924009
It is a little difficult. You have to be able to use Terminal to do step 3. Fortunately, my son was able to explain some of the details. The rest is straightforward.
I wish Apple would not include the new firmware without making sure it worked. I suppose if I upgrade to Lion, which I would like to do, I will have to go through the process again. For now I will stick with 10.6.8 and the Airport driver from 10.6.4, since that is working great.

Lost iTunes Library after upgrading to iTunes 7.7 HELP PLEASE

I have two issues on hand : after upgrading to iTunes 7.7 I opened iTunes and all of my music was gone except for about 1,000+ songs (3.2 GB) when I originally had about 20GB worth of songs. How can I recover my full library into iTunes ?
Second issue: when importing new CDs into iTunes 7.7 it only plays a fraction of each song before moving on to another song, whereas iTunes shows that I have the full song imported.
I really appreciate someone's help here, and does the latest version of iTunes have a bug ??

Further to my last post, I find that the purchased songs have been retained in the iTunes Library of my Mac Book - is there any way iI can restore them to the iMac?

IPad 2 Wifi Problems after upgrading to iOS 6

I Updated my iPad 2 to ios6 then day iOS6 was released, ever since then i have been unable to connect to the wifi. I've reset the network setting and the wifi works for about 5 minutes until i go on any apple app ( itunes, app store, maps etc). I've reset the Network settings more than once, I've turned the HTTP proxy to auto, I've pressed Renew Lease, I've unplugged the wifi, and I've pressed Forget this network. Reluctantley i updated my ipod touch 4 gen to see if iOS 6 was the problem and I now have the exact same problem on my ipod touch. Someone Help!!

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Lost my music after upgrading to iOS 8

After upgrading to ios 8 I lost all the music downloaded through iTunes (from ripping my CDs), on both iPhone 5 and iPad 3rd generation, except the music purchased online.

Hey Keisha, Are the photos in your iPhoto library on your computer? If so, you should be able to check the photos option in your iPod's summary page in iTunes and add then back. Hope this helps, Cheers.

Lost my wireless after upgrading

After upgrading my Airport Extreme to 5.3.1, i have lost my wireless connections. I still have my wired connection through the router, I can't seem to re-establish my network through airport. I have even reset the airport by pushing the button. Restarted my cable internet connection x 2 and restarting my computer, recycling the Airport Extreme...nothing is working wirelessly. Maybe my Airport Extreme is broken?

Try deleting the following files from the ~/Library/Preferences/ directory (this is the Library directory within your User folder):
* com.apple.internetconfig.plist
* com.apple.internetconfigpriv.plist
* com.apple.internetconnect.plist
go to to Airport menu and re-selecting the desired network.
*perform a hard reset*
http://docs.info.apple.com/article.html?artnum=107451
Also, merely unplug the Base Station and then plug it back in after 30 seconds or so. I've also experienced this same problem on a very infrequent basis and recycling the AEBS always permitted it to be recognized again by Apple's Airport Utility

MOVED: Lost Wifi adapter after upgrading win8 to win8 pro!

Similar Messages

Maybe you are looking for