MOVED: mainboard X48C freez problem

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=122217.msg1061767#msg1061767

Quote from: mosu81 on 01-November-10, 02:17:08
thank you so much. i need help with this Pc to make it work finali.freezes when the mood takes him, sometimes goes well(when I do video editing and uses memory), sometimes freeyes when it starts win 7 ; After a few minutes.memorz voltaje now is 1,54 or 1,58 and the same problem. can i use the memory modules DDR3 without Switch Cards installed?the PC, MB will work?
I had a issue like this freezing , when my video card was failing . Do you have another video card to try ??

Similar Messages

Mainboard X48C freez problem

I have a computer:
intel Core2 Duo E8400, 3.00GHz/1333 lga 775
MsI X48C Platinium
Kingmax DDR3 1GB 1333 x2
MSI NVIDIA N9600GT DDR3
Seagate 400GB S-ATA2
Samsung 500GB S-ATA2 x 2
RaidMax X-FORCE
WIn XP pro SP2
the PC it just started to freeze, sometimes hi work a one hour ,sometimes after 5 minutes. anything I make: listening music, video editing and so o. is anyone who have this problem? whit DDR2 the pc work perfect. what can I do?

Quote from: mosu81 on 01-November-10, 02:17:08
thank you so much. i need help with this Pc to make it work finali.freezes when the mood takes him, sometimes goes well(when I do video editing and uses memory), sometimes freeyes when it starts win 7 ; After a few minutes.memorz voltaje now is 1,54 or 1,58 and the same problem. can i use the memory modules DDR3 without Switch Cards installed?the PC, MB will work?
I had a issue like this freezing , when my video card was failing . Do you have another video card to try ??

I have a mainboard X48C freeze problem

Hi I'm new to the forum, sorry to jump on the band wagon but I have the same problem which has only just started, since I bought a Q9550 (previously had a E660) and instead of starting a new post (can if you want) thought I would ask for some help here.
I have the following system:
Windows 7 x64 Enterprise
Q9550 CPU
1x ATI HD4870 1Gb GPU
MSI X48c mobo (2x 120 case fans)
2x (4Gb total) Corsair CM3X2G1333C9 DDR3 RAM
Noctua CPU heatsink
2x WD2500KS SATA HDD (RAID 0)
1x 1Tb SATA WD Green
1x SATA CD/DVD burner
OCZ 600w (OCZGSX600) PSU
Tsunami Dream case (2x 120mm fans)
USB ports in roof of case (standard fitting)
With the E6600 all was good in the land. Slightly OC from 2.4GHz to 2.8Ghz but nothing to set the world on fire. System was very stable. Introduce the Q9550, cleared all CMOS Windows is ok(ish) but when gaming I have random PC freezes, black screen for a few secs then it comes back to life. Occationally the PC will reboot it's self too. All drivers are up to date, latest BIOS, just reinstalled Windows 7 x64 and the problem is still occurring (in fact I had a 7e error whilst installing Windows...) Graphics card has been tested on a friends rig and no problems there.
Even setting the CPU and RAM volts manually hasn't resolved the problem. In fact it appears the RAM needs more volts than it is guaranteed to run at; they state 1.5 but this BSOD during windows install, 1.63 and I was able to reinstall Windows fine but after a few mins of gaming the PC froze again. I havent waited for a full blown auto-reboot again. I have set the CPU to 1.3v. Memtests have not produced any errors. I monitor with RealTemps and nothing is getting too hot.
Furthermore I seem to now often get the problem of the PC not booting at all. Power on, fans start and continuously spin fast, I know when it will boot as the GPU fan slows down. PSU underpowered maybe..? I dunno
I am interested in the fact that advice was given to remove the Switch Cards... I was under the impression they had to be installed? What benefit will this bring? I have also thought my PSU might not be up to the job but I have had conflicting responses there.
After having a scan around the forum here it appears I may need to lower my RAM settings?
Taken from datasheet:
 Tested and packaged in pairs
 Packaged together immediately following system
test
SPD settings of: 7-7-7-20 at 1066MHz
 Guaranteed at:
Timings of 9-9-9-24 values at 1333MHz
Would you advise to lower to 1066? Will try when I get home (was so hoping to get the most out of them!)
Regards,
Spanky

Thanks for the reply and peeling my post off Mike, sorry I didn't start my own initially.
Well @ 1333Mhz I was using the rated timings 9-9-9-24 (as per Corsair) but it wasn't very stable as I said.
I have since changed the FSB/RAM ratio to get 1066Mhz and it seemed much happier. (@1.5v) It would be nice to run the RAM at it's rated setting but my OC skills aren't that extensive. I imagine it would need alot of tweeking? Or could I have just relaxed the timings a bit?
Would removing the Switch Cards make any difference?
Thanks in advance.

MOVED: MSI X48C - Boot problem after overclock

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=157431.0

Quote
well the system had been working for 1 year. This trouble occurred 2 days ago, when I've tried to increase memory speed
Well, isn't that how it always happens, when stuff breaks? It works for a year and then suddenly, it doesn't?
Quote
when I've tried to increase memory speed
As I said: possibly northbridge (memory controller/PCI-E interface) related.
Quote
If I remove all memory sticks I hear 3 bips in a row but nothing else (the pc is stuck at the black screen).
That still sounds normal. The system fails to initialize the memory (since there is no module installed) and halts during the first step of memory initialization. The same thing would happen on any other system.
Your problem starts once you insert RAM. Since you don't get any beeps, the system seems to start memory initialization, but gets stuck in the process, or during one of the checkpoints after that.
I don't think there is a solution to this. Something broke.

Email - Your account is moving to paper free-billi...

Hi, I'm a new forum user so apologies if this subject has been asked before, I've looked and couldn't find anything.
I have received an email this morning from BT headed Your account is moving to paper free billing and reads as follows:
We have an ongoing commitment to save paper, which is why we will soon stop sending paper bills to customers who have online billing.
Within the next few weeks we'll send you an email to let you know we've moved your account to paper-free billing. This means we'll stop sending your paper bill, but you'll still be able to view and download your bill whenever you want online in My BT.*
Learn more about paper-free billing. (link)
We hope you'll enjoy the benefits of paper-free billing from BT.
Regards,
Warren Buckley
*If you want to keep your paper bill, please let us know. The change to paper-free billing only affects one account, if you have multiple accounts please log into My BT to check the billing methods. If you change your account details in the next two weeks, you might not be moved to paper-free billing. Paper-free T&C's
Being very wary of email scams I've contacted the online assistant (India call centre by the operator name). They have given me the answer that if I'm on paper and on-line billing this will continue, I will not be changed to paper-free billing only.
Now I'm even more wary of the email, although it does look genuine. Could any forum member or moderator please confirm that the email is genuine as I wish to continue to receive a paper bill for other members of the household who have no interest in using the computer.
I look forward to your assistance. With many thanks.
Solved!
Go to Solution.

11 November 2012
Dear Mr. Buckley,
Paper-free Billing
Currently I receive paper telephone bills, and also an email telling me that my bill may be viewed on-line. In your email of today (print-out enclosed) you tell me that my account “is moving to paper-free billing” and that you are going to stop sending paper bills. You do not ask if I no longer want to receive paper bills.
In my view this is about cost-saving and enhanced profit for BT but not for the customer. BT stand to save large printing and mailing costs by not sending paper bills, but you (a) make no offer to pass any of this saving on to the customer, (b) you appear take no account of the fact that it costs a customer to have a computer and an internet connection which they will need to see their bills on-line. Further, (c) the customer must remember their password to gain access to their on-line account to see the bill, and (d) if there is a problem with the customer’s internet connection they will not be able to see their bill. For example, after ongoing problems with my phone line and internet connection earlier this year, my phone line was dead or not working from 02 to 23/02/2012.
Unless and until BT pass on a significant part of the cost-saving and provide electronic bills in a form which doesn’t cost me to view it and ensure that it’s availability and reliability is the same or better than a paper bill, then I want to continue to receive paper bills.
Yours sincerely,

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

HT5225 is moving to iCloud free: my iPhone is showing a 20GB storage plan for $40 a year?

is moving to iCloud free: my iPhone is showing a 20GB storage plan for $40 a year?

yes it free, you get 20 gb as bonus

MOVED: Mainboard H61M-P20 G3 Bios problem

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=165495.0

Yes it boots into bios without del key.
HDD is Western Digital 160Gb SATA, but I tried without HDD too.
Operating system is : Windows 7 Home Premium 32bit, bios boot is in IDE Mode.

MOVED: K7N2 Delta2 OC problems

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=122072.0

Quote from: Henry on 04-December-08, 04:44:47
I would to just try it with only the A-DATA 1GB stick as I said before and see how it goes. You will never know if the problem is with the mixed memory or not unless you do this. Any way you look at it mixing 3 different brands & 2 sizes of RAM is not good! And then you OC on top of that.
Edit: If there was no problems before you started using the free sticks of RAM by the time you get done fooling with BIOS settings to get it working you probably have reduced the performance of your PC and gained nothing. How would you walk with a platform shoe on 1 foot and a regular shoe on the other foot? Not as good as with both shoes the same I bet.
when I used A-DATA 1GB the same probelm showed up.
When I do not OC , everything works fine...(games,prime95 etc)
So it is better said so: When i am walking, the both shoes feel fine, but when i try to run, there is probelm (maybe the shoes need new laces,or the heart is not strong enough and need some powerup ) so i just try to figure out where could be the problem and solve it.

MOVED: [Neo4-F/Venice] Problem with downclocking

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=136087.0

I found the main problem.
I have two versions of windows:
- xp pro sp2 integrated 01/2007
- xp pro sp3 integrated 12/2009 performance edition, integrated all driverpacks
Because I found some problem with hdd <-> mainboard communication in smart, i tried with some other hdd and tried to create all partitions once again.
During installing xp sp3 on both hdd, i got bsod 0x7f/0x8e after decompressing driverpacks. This showed that this is not a problem with hdd. So I tried to install xp sp2 and it was working properly. Then I was installing drivers to verify which may cause problems:
- graphic card - working
- nforce - working
- AMD Cool'n'Quiet - working
- RMClock - bsods after each decrease of multiplier or voltage, cpu can work only on 9x and 1.4V
Because it is problem with Cool'n'Quiet, I guess that it may be a problem with windows sp3 because driverpacks integrates AMD CnQ drivers. So I disabled CnQ in bios and tried to install xp sp3 once again. And.. it is working !!!.
So the problem is with Cool'n'Quiet. I can't change any parameters of cpu because I get bsod each time. The best way is to disable CnQ in bios. On 1.4V and 9x it is working properly, no bsod under superpi and other cpu testing programs.
I tried also to modify cpu multiplier in bios. Each decrease cause system freeze after showing system info in table and system can't boot. It is working only on 9x.
Is it a problem with mainboard or cpu?

MSI X48C Platinum problem

i have a MSI X48C Platinum
Ram: OCZ PC3-12800 Gold RAM - 4GB, 2x2GB, 1600MHz, DDR3, Low Voltage, Dual Channel
Processor: Intel Pentium D 915 2.80GHz / 4MB Cache / 800MHz FSB / Dual-Core /
PSU: thermaltake 420w
Problem: i turn the computer on it sounds like its going to start up then turns off for 5 seconds then comes back on and dose the same thing over and over. if i hit the button on the back of the motherboard it will boot and say CMOS Settings Wrong, CMOS Date/Time Not Set, Press F1 to Run Setup Press F2 to load default values and continue if i click f1 it will go in to bios and if i click f2 it will load windows.
any help??

Quote
sorry i dont know what you mean when you say amperage limits (A) on the +12V voltage rails
Look on the PSU sticker. And write down the numbers.
Quote
ok i got it to boot but it dose the same thing
Did you do this?
Quote
Manually set the memory clock speed to DDR3-1066 for testing and see what happens.

K7N2 deltas mainboards have a problem with usb devices ??

Ok here is my problem..
I had installed WinXP Pro with SP1..
I got a 20 GB USB2.0 disk.i connected it on the both front or rear usb ports.
When i tried to transfer files to my usb disk or to my PC, in the middle of the copying, i got "Write Delay Failed" error and lost my usb connection..
I had to plug it out and in again..
Now, i have an DSL modem..Last night, i was disconnected from internet and my modem's lights gone..I plug it again, no lights..restarted my PC, also completely shutdown Windows XP..Again no lights..
Then, formatted PC and installed windows 2000 Pr and SP4, until now, my modem worked fine..But USB 2.0 ports are still no use for my usb disk...
In bios , it's enabled as USB 1.1+2.0..
I think this K7N2 deltas have a problem with usb 2.0 devices and Win XP Pro..
Some guys talking about, removing 9th wire earth, but couldn't understand which wire from where ? From mainboard or from usd device's cable ?
Those cables are fabricated, i think it's impossible ?
My processor is Athlon 2500+, ram Twinmos 512 DDR 400
Thanks for reply

I'm also having this problem. It's happening with my USB flash disk. I was almost buying another one when I tried it with Windows Vista on the same machine and it worked ok, then I tried Arch Linux (with kernel 2.6.30.5) on another machine and got the same error. After that I tried Ubuntu and it worked ok. Seems that Arch's kernel doesn't like my USB flash disk.
Last edited by esdrasbeleza (2009-09-02 01:16:09)

MOVED: MSI vr330x vga problem

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=144982.0

Hi again,
Have you tried updating to Win XP Service Pack 1 yet?
Else, you may want to try this weird method as some gave a shot and the problem's solved, but not to everyone...
Boot up using the the cards that work, next, shutdown com(do not un-install drivers), put in the Leadtek card, boot up and see if there's the original 16bit colors with 800 by 600 res screen while starting up windows, if it does, try installing the drivers for WinXP/2000 by manually selecting the location as XP has a problem in detecting XP's VGA drivers, restart and see if problem persists.
All the Best... :D!!!

MOVED: diamond plus vcore problem

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=98428.0

Hello !!
There is an Option in Bios in Cell Menu called "Extra CPU voltage" you can raise it with the +/- keys.
This guide is also good getting into the basics with this Board:
http://www.msi.com.tw/html/service/techexpress/mainboard/7220/page1.htm
Greetz

Moving to EclipseLink (SessionCustomizer problem)

Hi,
I moved from Toplink Essentials to EclipseLink with Tomcat 6.0.18 and have this problem:
I created two web applications both uses EclipseLink. Due to using non-jta-datasources I created in both applications JPAEclipseLinkSessionCustomizer as shown here: http://wiki.eclipse.org/EclipseLink/Examples/JPA/Tomcat_Web_Tutorial
When I start one application everything works fine. As soon as I run the other application which uses EclipseLink I got exception:
Exception [EclipseLink-28014] (Eclipse Persistence Services - 1.1.1.v20090430-r4097): org.eclipse.persistence.exceptions.EntityManagerSetupException
Exception Description: Exception was thrown while processing property (eclipselink.session.customizer) with value (hlaseni.JPAEclipseLinkSessionCustomizer).
Internal Exception: java.lang.ClassCastException: hlaseni.JPAEclipseLinkSessionCustomizer cannot be cast to org.eclipse.persistence.config.SessionCustomizer
Can anyone help?
Thanks
PERSISTENCE.XML
<?xml version="1.0" encoding="UTF-8"?>
<persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd">
<persistence-unit name="hlaseniPU" transaction-type="RESOURCE_LOCAL">
<provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
<non-jta-data-source>java:comp/env/jdbc/Hlaseni</non-jta-data-source>
<class>hlaseni.entity.Zmeny</class>
<exclude-unlisted-classes>true</exclude-unlisted-classes>
<properties>
<property name="eclipselink.session.customizer" value="hlaseni.JPAEclipseLinkSessionCustomizer"/>
<property name="eclipselink.logging.level" value="INFO"/>
</properties>
</persistence-unit>
</persistence>
CLASS JPAEclipseLinkSessionCustomizer:
package hlaseni;
import javax.naming.Context;
import javax.naming.InitialContext;
import org.eclipse.persistence.config.SessionCustomizer;
import org.eclipse.persistence.sessions.JNDIConnector;
import org.eclipse.persistence.sessions.Session;
public class JPAEclipseLinkSessionCustomizer implements SessionCustomizer {
public void customize(Session session) throws Exception {
JNDIConnector connector = null;
Context context = null;
try {
context = new InitialContext();
if (null != context) {
connector = (JNDIConnector) session.getLogin().getConnector(); // possible CCE
connector.setLookupType(JNDIConnector.STRING_LOOKUP);
System.out.println("_JPAEclipseLinkSessionCustomizer: configured " + connector.getName());
} else {
throw new Exception("_JPAEclipseLinkSessionCustomizer: Context is null");
} catch (Exception e) {
e.printStackTrace();
}

Pavel,
I was able to run EclipseLink JPA using a non-JTA datasource on Tomcat 6.0.18 using the following configuration.
I will update the tutorial with this 3rd type of database connectivity.
1) transaction-type RESOURCE_LOCAL direct connection using "javax.persistence.jdbc" properties - previously working
2) transaction-type RESOURCE_LOCAL non-JTA datasource connection using "non-jta-data-source" or "javax.persistence.nonJtaDataSource" - verified today
3) transaction-type JTA "jta-data-source" - working only when Tomcat is run as a service
2) non-jta-datasource setup for persistence.xml, web.xml and server.xml
Note: if the resource-ref setup is missing or if the jndi names do not match you will see "name not bound" exceptions
persistence.xml
<persistence-unit name="statJPA" transaction-type="RESOURCE_LOCAL">
<provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
<non-jta-data-source>java:comp/env/ds/OracleDS</non-jta-data-source>
<class>org.eclipse.persistence.example.unified.business.***</class>
<properties>
<property name="eclipselink.session.customizer" value="org.eclipse.persistence.example.unified.integration.JPAEclipseLinkSessionCustomizer"/>
<property name="eclipselink.target-database" value="org.eclipse.persistence.platform.database.oracle.OraclePlatform"/>

<property name="javax.persistence.nonJtaDataSource" value="java:comp/env/ds/OracleDS"/>
<property name="eclipselink.logging.level" value="FINEST"/>
</properties>
</persistence-unit>
JPAEclipseLinkSessionCustomizer.java
- matches what is on
http://wiki.eclipse.org/EclipseLink/Examples/JPA/Tomcat_Web_Tutorial#Session_Customizer
web.xml
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
<display-name>UnifiedTomcatWeb</display-name>
<servlet>
<display-name>FrontController</display-name>
<servlet-name>FrontController</servlet-name>
<servlet-class>org.eclipse.persistence.example.unified.presentation.FrontController</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>FrontController</servlet-name>
<url-pattern>/FrontController</url-pattern>
</servlet-mapping>
<persistence-context-ref>
<persistence-context-ref-name>persistence/em</persistence-context-ref-name>
<persistence-unit-name>statJPA</persistence-unit-name>
</persistence-context-ref>
<resource-ref>
<description>DB Connection</description>
<res-ref-name>ds/OracleDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
server.xml
<GlobalNamingResources>
<Resource
name="ds/OracleDS"
auth="Container"
type="javax.sql.DataSource"
maxActive="100"
maxIdle="30"
maxWait="10000"
username="scott"
password="pw"
driverClassName="oracle.jdbc.driver.OracleDriver"
url="jdbc:oracle:thin:@y.y.y.y:1521:orcl"
/>
</GlobalNamingResources>
<Context
className="org.apache.catalina.core.StandardContext"
cachingAllowed="true"
charsetMapperClass="org.apache.catalina.util.CharsetMapper"
cookies="true" crossContext="false" debug="0"
displayName="UnifiedTomcatWeb"
docBase="C:\opt\tomcat6018\webapps\UnifiedTomcatWeb.war"
mapperClass="org.apache.catalina.core.StandardContextMapper"
path="/UnifiedTomcatWeb"
privileged="false" reloadable="false"
swallowOutput="false" useNaming="true"
wrapperClass="org.apache.catalina.core.StandardWrapper">
<ResourceLink
global="ds/OracleDS"
name="ds/OracleDS"
type="javax.sql.DataSource"/>
</Context>
</Host>
Logs:
[EL Finest]: 2009-06-01 15:19:23.828--ServerSession(13961193)--Thread(Thread[http-8080-1,5,main])--property=javax.persistence.nonJtaDataSource; value=java:comp/env/ds/OracleDS
[EL Finest]: 2009-06-01 15:19:23.844--ServerSession(13961193)--Thread(Thread[http-8080-1,5,main])--property=eclipselink.session.customizer; value=org.eclipse.persistence.example.unified.integration.JPAEclipseLinkSessionCustomizer
_JPAEclipseLinkSessionCustomizer: configured java:comp/env/ds/OracleDS*+_
[EL Info]: 2009-06-01 15:19:23.844--ServerSession(13961193)--Thread(Thread[http-8080-1,5,main])--EclipseLink, version: Eclipse Persistence Services - 2.0.0.qualifier
[EL Config]: 2009-06-01 15:19:23.859--ServerSession(13961193)--Connection(6427893)--Thread(Thread[http-8080-1,5,main])--connecting
(DatabaseLogin(
platform=>OraclePlatform
user name=> ""
connector=>JNDIConnector datasource name=>java:comp/env/ds/OracleDS
[EL Config]: 2009-06-01 15:19:24.327--ServerSession(13961193)--Connection(24968504)--Thread(Thread[http-8080-1,5,main])--Connected
: jdbc:oracle:thin:@y.y.y.y:1521:orcl
User: SCOTT
Database: Oracle Version: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Driver: Oracle JDBC driver Version: 11.1.0.0.0-Beta5
EL Info]: 2009-06-01 15:19:24.358--ServerSession(13961193)--Thread(Thread[http-8080-1,5,main])--file:/C:/opt/tomcat6018/webapps/UnifiedTomcatWeb/WEB-INF/classes/-statJPA login successful
- user sends "demo" command to servlet....
[EL Finer]: 2009-06-01 15:19:24.39--ServerSession(13961193)--Thread(Thread[http-8080-1,5,main])--client acquired
[EL Finest]: 2009-06-01 15:19:24.39--UnitOfWork(13645178)--Thread(Thread[http-8080-1,5,main])--PERSIST operation called on: [email protected].
[EL Finer]: 2009-06-01 15:19:24.483--UnitOfWork(13645178)--Thread(Thread[http-8080-1,5,main])--begin unit of work commit
[EL Finer]: 2009-06-01 15:19:24.483--ClientSession(26548428)--Connection(16408563)--Thread(Thread[http-8080-1,5,main])--begin transaction
[EL Finest]: 2009-06-01 15:19:24.499--ClientSession(26548428)--Thread(Thread[http-8080-1,5,main])--reconnecting to external connection pool
[EL Finest]: 2009-06-01 15:19:24.499--UnitOfWork(13645178)--Thread(Thread[http-8080-1,5,main])--Execute query InsertObjectQuery([email protected])
[EL Fine]: 2009-06-01 15:19:24.499--ClientSession(26548428)--Connection(26760685)--Thread(Thread[http-8080-1,5,main])--INSERT INTO
STAT_LABEL (ID, DATE_STAMP) VALUES (?, ?)
bind => [7127, null]
thank you
/michael

MOVED: mainboard X48C freez problem

Similar Messages

Maybe you are looking for