Moved media files relink with different start/end times

Hi all,
I'm really stuck here so any help would be greatly appreciated.
I've got a number of FCP projects which use media from one drive.
The drive containing this media is soon to be in use by another project so I have done a direct copy of all the media onto another drive using finder. Literally a drag and drop copy of the files.
However, when I re-open the project and relink to the 'new' files on the new drive I am getting multiple "different start/end times" errors causing all the edited clips to play from the wrong times.
How can I stop it changing the time code when doing this?
Thanks
YD

On closer inspection, this only seems to be affecting BWavs, if that helps at all?

Similar Messages

Can't view time or change start/end time of clip

Using imovie '09 and have several events that I imported from .mov files. imovie displays the total length of the clip but when I run the cursor over the clip in the browser the little timer window that pops up says "Created:" followed by the date/time that it was originally imported from a camera into .mov format. Every other file that I've imported directly into imovie from a camera gives me the running time of the clip as I run the cursor through the clip. I've tried to adjust the clip's date/time but it won't let me create a start/end time - regardless of what date/time I put in it assigns the same date/time to the start and end of the entire clip and doesn't show any running time so I can't mark/note specific times in the clip that I want to later select. Not sure why this is happening with these specific clips that were imported from existing .mov files - possibly because these clips were originally imported onto a pc and converted into .mov files, then imported into imovie after that? I still have the original tapes so I could import to imovie from scratch but would prefer not have to to do that as this makes up 20 hours of vid. Any solutions?

You might get a better response to your question over in the iLife > iMovie community. This forum is iMovie for iOS so most visitors here are working on a different platform, and while some may know about both products, many won't, me included.
tt2

Adjusting Start / End Time on Apple TV

Hello everyone,
In iTunes, we have the ability to adjust the Start / End time of a song or video by right-clicking the media > Get Info > Options. Then when we playback the media the next time, it will use the settings to determine how far into the media it should start and stop. Is there any way for these settings to get passed through to the AppleTV?
- Thanks

I would also like an answer to this! The original Apple TV applied the custom Start and Stop times, however the new one ignores them and plays the whole video file! Very annoying! Any solutions out there?

IMovie effects start/end time limited

I'm trying to use the split screen effect from the GeeThree plugins for a 2 in 1 video music demonstration. The video is about 5 mins long. But I can't seem to make the Split Screen video effect to stay in the entire time. The effect starts the first second of the video, and then ends 10 seconds later. I've tried messing around with the Start/End slider, put everything to 00:00, still nothing. Any take on this?

You might get a better response to your question over in the iLife > iMovie community. This forum is iMovie for iOS so most visitors here are working on a different platform, and while some may know about both products, many won't, me included.
tt2

Contract Value Calulation based on Start & End Time

Hello Friends,
My client is into Vessel Hiring & the Vessels are given on hire for fixed period (with clear start & end dates & time).
For the above scenario we have a Periodic Contract to BIlling cycle which generates Invoices for every month. while creating the Contract we enter Basic Price as Day-Rate (Calculation type in Condition - O - Quantity - Daily Prices)
Thus the system automatically calculates the Basic Price Condition value based on number of days in any month.
Now the issue here is the client wants system to take Start & End time into consideration. In the Contract header - Contract Data tab we have developed two additional fields (Z-Fields) that capture start time & end time for every Contract.
So, we want system to calculate the Basic Price Condition value based on the Contract start date + Contract Start time.
Example :
1. Contract start date - 25.03.2010 & Start time = 12:00 noon. Basic Price = Rs. 10,000 per day.
2. In the Monthly Invoice, system would calcualte the Basic Price as Rs. 70,000 (7 days i.e. 25.03.2010 to 31.03.2010)
But here the client wants system to consider Start Time & determine Value as Rs. 65,000 as the Contract started on 12:00 noon on 25.03.2010.
Can anyone tell me how to achieve this?
I guess we should develop some routine (in VOFM) & apply it in Pricing Procedures.
But can some expert guide me on the logic of the routine & exactly where to apply the same in Pricing Procedure...
Thanks,
Jignesh Mehta

Hi,
Develop routine and make combination
if start date is xyz and start ime is less that 12 then price is so on so
if date start date is xyz and satrt time is more that 12 then price is so on so.
Hello I am not ABAPer, still tried to suggest you,don't mind for my suggestion
Kapil

Calculate report execution start & end time (Not use SE30)

Dear all Abaper,
I am writing a report which recorded the execution start & end time
The following is a part of my coding.
Data : GV_ST_TIME LIKE SY-UZEIT. "START TIME
Data : GV_EN_TIME LIKE SY-UZEIT. "END TIME
START-OF-SELECTION.
GV_ST_TIME = SY-UZEIT.
END-OF-SELECTION.
GV_EN_TIME = SY-UZEIT.
WRITE: / 'START TIME:', GV_ST_TIME.
WRITE: / 'END TIME:', GV_EN_TIME.
Suppose the report has executed 5 second
from time : 00:00:00 to 00:00:05.
But in the output screen, the start time and end time always display the same time(00:00:05) if following the above coding.
However, if in the debugging mode, the start time and
end time will be different and really counted.
Does anyone know the reason and how to fix it if I don't wanna use SE30?
Thx in advance~

Hi boris,
1. minor problem
2. we have to REFRESH the time value
3. using GET TIME.
(Then it will work correctly)
4.
START-OF-SELECTION.
<b>GET TIME.</b>
GV_ST_TIME = SY-UZEIT.
END-OF-SELECTION.
<b>GET TIME.</b>
GV_EN_TIME = SY-UZEIT.
regards,
amit m.

Logging start & end time of map execution

Hello,
I want to log start & end time of execution of my map (OWB 11g), so I've created a table for this purpose and I used it in every map that I want to log time, twice; First for logging start time, and second for end time.
I pass a constant with SYSTIMESTAMP value through my log table and also name of my map. but the problem is, both of my records' time (start & end) are very near to each other (difference is in milliseconds!) however my map takes time for more than 2 minutes! So, I've changed my map Target Load Order to: [log table for start time] + [Main tables of my map] + [log table for end time]. I've set my map Use Target Load Ordering option True, too.
Why it doesn't work? Is there any better solution for logging every map execution time in a table, or not?
Please help me ...
Thanks.

To do that, I have created a view that lists all processes that are running or finished. The view contains fields:
process_name
process_type (plsqlmap, plsqlprocedure, processflow, etc)
run_status (success, error, etc)
start_time
end_time
elapse_time
inserted
updated
deleted
merged
You could insert into your log table using select x from this view after every map, or, how I do it, is to insert into log table after every process flow. That is, after my process flow is complete I then select all of the details for the maps of the process flow and insert those details into my log table.
Here is the SQL for my view. This is for 10.2.0.3. For
CREATE OR REPLACE FORCE VIEW BATCH_STATUS_LOG_REP_V
AS
(SELECT PROCESS_NAME,
PROCESS_TYPE_SYMBOL,
(CASE
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK', 'COMPLETE') THEN 'SUCCESS'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_FAILURE') THEN 'ERROR'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK_WITH_WARNINGS') THEN 'WARNINGS'
ELSE 'NA'
END
) RUN_STATUS_SYMBOL,
START_TIME,
END_TIME,
ELAPSE_TIME,
NUMBER_RECORDS_INSERTED,
NUMBER_RECORDS_UPDATED,
NUMBER_RECORDS_DELETED,
NUMBER_RECORDS_MERGED
FROM OWB_RUN.RAB_RT_EXEC_PROC_RUN_COUNTS
WHERE TRUNC (START_TIME) >= TRUNC (SYSDATE) - 3)
ORDER BY START_TIME DESC;

Start/end times and volume adjust to CD

i am a music studio mix engineer and i am working on an order for an album i recently finished. i love how i can trim songs with the "start/stop time" feature unique to each song. and the unique volume adjustment for each song is great. is there any way to get these preferences/tweaks you've made (which are audible when you play them in itunes) to make their way to disk when you burn that playlist as a CD in itunes? or when you xfer the files/playlist to your ipod... i don't hear these start/stop/volume tweaks. or the EQ for that matter.. but i'm less concerned with the EQ side, they are all flat.
thanks!

If you 'convert' those shortened songs, the copies will only contain the part as set by start/stop times.
You can 'convert' to the same format as the originals.
If you're working on AIFF files there will be no quality loss.
Volume adjustments and equalizer settings are for playback only. These settings are not 'copied' when the songs are burned to CD
Hope this helps.
M

ITunes Match on Apple TV ignores my custom start/end times on tracks

Some of my tracks in iTunes have custom start/end times set (to cut out skits and stuff). These set start/end times are respected by all my iTunes Match devices (iPod and desktop iTunes) except my Apple TV.

Hey guys,
I ended up here for having the same issue. iTunes Match playing the song for 20 seconds or so on Apple TV and then giving me error message saying iTunes is currently unavailable. Try again later. No trouble shooting worked for me as it didn't for you either. After using my apple tv for several months and experiencing occasional glitches that are somewhat similar to this probelm I boiled it down to 2 possible reasons. 1) some kind of bug that is fixable with latest firmwares Apple releases. 2) problems with Apple's servers. My best guess for this particular problem is the server problems because everything was playing fine until yesterday (Saturday) and the current frmware was released few weeks ago. It is strangely coincedental that most glitches seem to appear over the weekends. About couple of months ago I tried to watch an episode from a show and it would tell me the show would be available to watch in 24 hours. The loading was painfully slow. The problem only lasted a weekend. I wouldn't be surprised if the problem disappears tomorrow although I might be wrong.

Start/End times in Custom Formula - OTL

Hi,
Is it possible to access the start,end times of a particular day in a custom OTL Fast-Formula ?
Can someone point me to any links for writing custom Fast-formula.
The [user/Impl Guide|http://download.oracle.com/docs/cd/B53825_07/current/acrobat/121hxtig.pdf] has very limited information on OTL custom Formula.
TIA,
VB

VB,
Look at the seeded time entry rule FF and that will provide you with a sample code which provides access to all the attributes of timecard.
--Shiv

Room Booking - unavailable if start / end time is :15 or :45

Hi all,
First apologies if this is in the wrong forum.
Due to the way our school day runs, we need to be able to book rooms from :15 and :45 (e.g. 10.15 to 11.15, 11.45 to 12.45).
You can change the start / end time manually but if you do the rooms do not show as available and the suggested times only work for :00 or :30.
Is there a way to change it so the rooms can be booked for a wider variety of times?
I've googled this endlessly and the only thing I can really find that might be applicable is changing the timeincrement but I think that only applies to the calendar view and the start / end time showing 15 minute increments instead of 30 as default but
does not have any impact on room availability.
Hopefully someone can help.
Thanks a lot

Hi Chris,
It is by design and we cannot change the time slot displaying. Your understanding would beappreciated.
Besided, it is recommended to add an End date for a recurrent meeting.
Refer to:
http://office.microsoft.com/en-us/outlook/HA011276781033.aspx
http://office.microsoft.com/en-us/outlook-help/best-practices-for-outlook-2007-HA010371521.aspx
Fiona Liao
TechNet Community Support

Start/end times of songs

When listening to and/or shuffling music on my iPod, the songs randomly start in the middle and not in the beinning. Note that iTunes (7.5) automatically disables (unchecks) the start/end times of songs in their respective dialog boxes after "ok" is selected.

Dave,
You're stuck.
Unless you want to duplicate the song and then make your adjustments.
If it were me, I'd put the track I'm interested into GarageBand and cutting it down to just the bit I want and the send that version back to iTunes.
Matt

Custom text component with different start and end points for each line

I'm trying to create a custom component extending textArea in which each individual line in the textArea would have different start and end points. For example, the start/end points for line 1 might be 20 pixels in the front and 35 pixels at the end but start/end points for line 2 might be 25 pixels in front and 20 pixels at the end, etc. These boundary values would be passed in. The width of the entire textArea component would be a fixed size. The result would be something like this:
Jack and Jill
ran up the hill
to fetch a pail of water
depending on the boundary values of each individual line of course. The custom component would take a string and render it in the text component with the appropriate individual line start and end points. I'm trying to do this by adding the text component to the display with the passed in string and then adding in spaces in the beginning of each line and adding a "/n" at the end of the line wherever appropriate based on the start and end values for that line.
Just wondering if I'm on the right track and if anyone has any advice on this.

> Applying the marker places the same icon on all lines of the graph and I need a different one for each
What do you have selected when you assign the marker? It
shouldn't apply to all the markers on the whole graph unless you have all the existing markers selected when you apply the new one.
Assigning marker designs is exactly analogous to assigning bar graph designs.
If you have a single marker selected when you assign the new design, it will apply to only that graph data point.
If you use the group select tool (or option-click with the direct select tool) to reclick on an already-selected marker until all the markers for the same line are selected, and then assign a design, the new design will apply only to the selected line. (You can extend the graph by adding more rows, and the new data points will inherit the marker for the line they are on.)
The thread linked to below demonstrates in more detail how the marker designs are scaled:
http://www.adobeforums.com/cgi-bin/webx/.3bc10970/0

Memory management, Moving media files.

Hi guys.
I've just recently installed a 4GB MSD/HC card with a view to freeing up some memory on the phone itself. I was hoping to move all my music, videos and images to the memory card.
The images moved across fine with only a little bit of trouble from "Desktop Photo Applet", but once I redirected it to the card things are now OK there.
I'd also like to do the same with all the music tracks and videos that are stored in phone memory, but as soon as I moved most of the music tracks, media player started going mammaries skyward, complaining it couldn't find tracks. needless to say I moved them back and didn't bother trying to move the videos.
Is there any effective way of doing this?
Thanks in advance.
Solved!
Go to Solution.

did you give the media player enough time to refresh the files?
When I've moved stuff before, after a few seconds the media player says obtaining information on new media files.
Once it has refreshed, everything worked ok
If this Post is helpful. A click on the White Kudos star is always Appreciated
Last Nokia: Nokia Lumia 800
Current Phone: A Non Nokia Device
Previous Phones:Don't Ask ;-)

Moving media files to networked hard drive

I just moved my media files to a hard drive connected to my time capsule. I thought I did it the way we're supposed to: specifying a new library location, and then organizing the library so that all of the files get copied to the new location. That worked fine, but when I start itunes (10) and do a command-I on a song, the file location is still the old one. I changed the directory name of the old media folder, and even moved the folder outside of the itunes folder, and every time I start itunes it still points to the old library. When I check my settings, the new library location is listed as the default library, but it seems as if the itunes library file is still looking for the old media folder. Anybody know what I'm doing wrong here? Thanks!

I am having the same issue as well...

Moved media files relink with different start/end times

Similar Messages

Maybe you are looking for