MOVED: MediaLive/6150LE TV-out stopped working

This topic has been moved to Mega PC series.
https://forum-en.msi.com/index.php?topic=113397.0

Some progress I have made using 169. drivers.
If I go 'Change the signal or HD format, select S-Video&B/Pal, unplug SVideo cable press Apply, wait Priview to end, then plug SVideo cable back on I'll get b/w picture on the TV. Colors comes Adjust TV color settings-Saturation.
THE next QUESTION how to make this boot resistance

Similar Messages

Video out stopped working with 10.4.6 update

Hi, i've just installed the 10.4.6 update and now i have no video out.
i have a video connected to the adc to s vhs connector. now when i start up my monitor starts up as the second display, and i have to put my computer to sleep and then wake it up and the monitor is reset to the main display.
is there anyway i can reset something, cause it seems like it's remember previous settings or something.
HELP!
if i disconnect the adc to s vhs adapter then it is all fine.

7 hours later and i finally get it working again.
i have no idea why this happened, but somehow the menu bar got switched to the tv display. at the same time as this my video stopped working properly. so that was half the problem.
then it took ages to reconfigure switch res, but i finally did it.
for some reason my g5 doesn't want to know about using a tv as a 2nd display, until......UNTIL!!!! you rotate the display in the display preference by 90 degrees. then all of a sudden it comes on, and you can rotate it back to normal.
why oh why this happens only apple knows. it's like a secret door into the wonderful world of dual displays.
sort it out apple.

Digital out stopped working for no reason?

I have been using the digital out through an optical cable to my surround sound for quite a few months. Today I turned the machine on and the sound no longer comes through. The surround sound does not show a connected device.
I have checked the cable and surround sound device by plugging in another device that has optical out - this works fine. When I plug the optical cable into the back of the mini mac it lights up.
Does anyone have any ideas how this might suddenly stop working and if there is way to fix it? Is the output of the digital out affected by software updates (im running latest updates)?

Hi.
Go to system preferences and then open sound. Click on the output tab and see what info you have under name. If you see Digital Out, it is hardware related (MLB) and needs service. Try to reset the SMC of the mini as well. Here's the steps:
http://docs.info.apple.com/article.html?artnum=303446
Good luck.

TV Out Stops working after Upgrading to iOS4

I have upgraded to iOS 4 on a 2nd gen iPod touch, and TV Out has stopped working. I know the problem isn't with my TV or Video cable,　since my iPhone 3GS with iPhone OS 3.0 firmwware works perfectly with TV Out. So I dare not upgrade my iPhone 3GS.

I'm a fool. My iPod Touch hasn't powered off for weeks. After rebooting, it seems everything works fine including TV Out. By the way, I upgraded from iPhone 3.0 and it's almost a clean install as I clicked restore. Miraculously, instead of restoring, it upgraded to iOS 4.0.
The only issue is that the battery seems to be drying out faster.

Tv-Out stopped working

Hi,
I have been using my iBook 14" with my television, via the apple adapter to AV input on the TV for months without any problem. Then suddenly just a couple of days ago it stopped working. Now, when I plug in the iBook the iBook screen refreshes (just as normal) but no picture ever arrives on the screen of my TV. Everuthing else is working fine on my computer. Does anyone know what this could be?
Glen

the iBook works, but does the tv work without the iBook? this could be very easily solved if this is the problem...

Why does the hdmi sound out stop working once I start using eyetv?

I upgraded to Lion and now I have a few problems. I use the Elgato EyeTV to record television on my Mac Mini. I have been using it for a few years. Now once I watch something on my EyeTV the hdmi sound output stops working and I have to reboot to be able to hear audio from iTunes or anything other then EyeTV. Why is this happening and when will there be an update to fix it?

There were numerous audio issues with OSX 10.6.8 that
were carried over into Lion and not resolved. Issues
with EyeTV was just one of them. May want to check
the Snow Leopard forum for workarounds, if any for your case.

Wireless mouse intermittently drops out/stops working

I have just bought a Mac Mini. I'm not a fan of Apple keyboards or mice, so I've bought a third party keyboard and I'm using a mouse that I already had (Microsoft Wireless Mouse 1000). Whilst it works fine with my Macbook Pro and PC, with the mini I get drop outs in the form of jerky movement and occassionally stopping long enough to see it just isn't moving. The mini works fine with a wired mouse.
My gut feeling from playing around with the different mice and computers is that it is actually the aluminium case shielding the signal from the mouse (as both are on the desktop and the mini sits at the back of the desk with the USB ports on the back and a great chunk of aluminium therefore in front of it.
I have a USB hub built in to the monitor, but that seems to have the same problem - the USB ports are behind the panel and associated electronics. Sadly, my keyboard (Ducky Zero DK2108) doesn't have a hub built in, so I can't connect the dongle to that either.
I'm just surprised I haven't seen (after a lot of googling) other complaints about the same. I may have to reluctantly buy a Bluetooth mouse as the BT antenna is of course outside of the Alu case. An alternative may be to use a small USB hub that can be positioned with line-of-sight to the mouse. It seems absurd I would have to do either of those things.
Can anyone else comment on their experiences?
Thanks!

Maybe this:
https://discussions.apple.com/thread/5230278?tstart=0
and
http://www.macobserver.com/tmo/article/usb-3.0-hard-drives-can-cause-wi-fi-inter ference
and
Troubleshooting wireless mouse and keyboard issues
I use an Apple KB and mouse on mine and have no problem. I do not use any USB 3 accessories

Airport Express light went out, stopped working.

Airport Express light went out. iMac says the connection is "excellent," but it's not working (I use it to stream audio) and is getting very warm. Did it die?

The usual cause of a dark LED is a failed AirPort Express. The reason your iMac reports an "excellent" connection is a mystery, but would be explained if it is actually connected to a different wireless network.
The only potential remedy is a "hard reset" (see below). In rare occasions, repetitive and persistent attempts have been known to revive an ailing Express. There isn't anything else you can do. A "factory defaults reset" is identical, but is performed by keeping its reset button depressed while connecting it to power. Try that also.
To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click. Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

MOVED: When installing soundcard USB stops working

This topic has been moved to AMD VIA SocketA based board.
https://forum-en.msi.com/index.php?topic=73624.0

Hi!
First, it doesnt matter which pci-slot i use, and also: it happens when I use the onboard-sound card also!!
And my psu probably got nothing to do with it, I've tried a B-Zerk 500W also and nothing changed so i guess it has got to do something with drivers.
It is good that people ask so many questions, you'll never know what can be wrong in a situation like this.
I haven't tried newest 4in1-drivers yet. I will do that, thanks for the tip.
Btw.. if I don't install motherboard drivers first after the installation of windows is complete and like install the graphics card before the motherboard drivers, the onboard network card doesnt work. It gets no IP-address!
Well.. I think I'll just sell the computer parts and start a knitting club.

Adobe Bridge Search Tool Just Stopped Working

i recently upgraded to CS6 and all was well for a couple weeks then all of the sudden the search tool in bridge just flat out stopped working. i always used it to search for keywords and it worked almost flawlessly until today. i have thousands of photos on multiple hard drives and ive even tried indexing them to no avail. nothing works. ive used both the search bar in the top right corner as well as the find window and still nada. i purged the cache, i rebuilt the cache and did everything else i could think of still to no avail. ive googled and googled and googled and found absolutely no help in resolving this issue. i reset bridge during startup also to no avail. i even indexed specific files in specific folders and pointed the search directly to those folders and still nothing. i dont know what else to try at this point. can anyone offer any suggestions before i give up and just re-install the product (which i REALLY dont wanna do)?
im running CS6 on Windows 7 64-bit .. and again, it worked fine until today. i havent changed any settings or modified anything that i can think of that would have thrown bridge out of whack.

Weird. Have you tried resetting Bridge (Ctrl/Cmd-click icon)?
Maybe the cache is damaged or unwriteable?
I assume that the index is created in the Cache 'data' folder, and that this is the root of your problem. As an experiment, you could create a new folder in a known good writeable location on an internal drive, and change the cache location in Bridge Preferences (making a note of the existing location first). When you restart Bridge, it will use the new location, and automatically create a new index and preview cache.
Then try a search in one folder, for a known used keyword, making sure you have indexing turned on in the search options. Let us know how you get on.

Mac Mini and USB 2.0 hubs (hubs stop working within a month)

I have an aluminum Mini running OSX 10.6.6 (Snow Leopard). With only 4 USB ports, I have need of a USB hub to accommodate my external drives and other peripherals: keyboard/mouse, camera and iPhone have to use the existing ports in the Mini (difficult access to ports due to space limitations), leaving one port for up to 4 external drives (older drives 40-60gb used for backup and extra storage).
I have problems using powered USB 2.0 hubs with this computer; I have 'burned out' 2 hubs since buying the Mini in February. They just flat out stop working, though they still show power (the power indicator light on the hubs); no peripheral is recognized when plugged into the hub (which worked fine for about a month). I can unplug the 'must use Mini ports' (camera, iPhone, charger, etc) and the peripheral drives are recognized and work normally when plugged directly into the Mini ports.
One hub was a Belkin 4-port hub (about 1 year old) and the other was a GE 3-port hub with several flash card readers (19-in-1 card reader), also about a year old. Is there any reasonable explanation why powered hubs would suddenly stop working, related to use with the Mac Mini 2010 aluminum version?
I had worse problems with the USB ports in an old (~2006) Mac Mini (out of warranty), where the USB ports in the Mini stopped working, which is partly why I bought the new mini. In light of this tidbit, (be honest, please) are there known issues with Mac Minis and USB?

Each of the external drives has its own power supply; I generally only use one drive at any one time, but on rare occasions I have powered up more than one to confirm or transfer files. I don't leave any of those drives on when not in use, and when everything is working I properly eject/unmount them before turning them off.
There have been times when I powered up a drive connected to a powered hub and both the hub and the drive indicated activity but the drive didn't mount. On those occasions the drives sometimes would not appear in Disk Utility, and other times would appear, but would not be "mountable". I didn't know what the best way to deal with that was, so I would just turn the drive off, hoping the lack of mounting on the desktop meant no real drive activity was occurring and I wouldn't risk data loss or drive damage. So far all the drives seem to work fine when plugged directly into the back of the mini.
The main external hard drive I was using when the Belkin hub failed (iomega 40g) is USB 2.0 only (no firewire). I have another drive that is only firewire (la cie 60g)... so it wasn't a factor. Two other external drives are ACOM, one 40g one 120g, and then there's my old iMac G5 disk (display fizzled and everything but the disk recycled through Apple's recycling program) which is mounted in an external enclosure and is part of the USB contingent, but is not being used for anything but backup (all three both USB 2 and FW400 capable). (I know, too many toys... but why throw them out?)
The USB hubs both had their own power supplies, too, and I never used them without power (though I tried it as part of troubleshooting, before reading the Apple article on USB and power requirements). Other USB devices that only work when plugged into the mac directly are my Epson Stylus CX4800 all-in-one, and my Radio Shark.
So, whaddya think? Should I risk buying another powered USB hub or just live with plugging in peripherals to one available USB port (through a short USB 2.0 extension) and only use one at a time? That would be a bit of a pain, but if there are no issues you've heard of with Mac USB ports (several unanswered questions in the Mini Support forums here involving USB and peripherals, I noticed), what else would explain the seemingly short lives of USB hubs?
Oh, here's something I just remembered: the last time the Belkin hub was working (last night), I had my Radtech BT mouse charger cable plugged in (not charging, mouse not attached) along with two of the external hard drives, and my Fuji camera USB cable. I got an error message onscreen (on the Mini) that a drive had been improperly ejected (or put away?), yet the hard drive in question was still mounted on the desktop. I looked at the hub, and the loose ends of the charger and the camera USB cable were touching. Could that have caused the error (and maybe the hub to fail)? (Edit: the camera cable I think was plugged into the mini's one available port; 3 external drives and the mouse charger were plugged into the hub, _but only one drive powered up and in use (3rd edit)_. The camera end of its USB cable contacted the mini-plug end of the mouse charger... could that have short-circuited the hub? +That wouldn't explain the failure of the GE hub a couple weeks before... but I don't know if any of this is connected, so to speak--2nd edit.+)
Message was edited by: blick
Message was edited by: blick
Message was edited by: blick

HP X4000b Bluetooth Mouse (H3T50AA) stops working if not moved for a while, then computer crashes

I will be very happy if someone answers this, 'cos from all the other related posts, my outlook is pretty bleak. At least give me the thumbs up for trying, or a little human contact. Proof this post existed.
Alright, I (fairly) recently updated to windows 8.1on my Samsung quad-core notebook - Model is NP905S3G
For the full info- see the picture.
Anyway, the problem is, that ever since I installed Windows 8.1, if I don't move the mouse for around 1minute when it is on (i.e. I just leave it still for 1 min because I'm typing stuff), it stops working. Moving the mouse simply doesn't do anything. If I look on the 'devices' screen, it is still shown as connected, and I can try re-connecting it, but it doesn't work. Turning on and off doesn't work. Pressing that little blue 'connect' button doesn't seem to do anything normally, and in this case, does nothing. Un-installing and re-installing the mouse does not permanently solve the problem (but does restore connectivity, at least until I leave the mouse idle for too long again)
Currently, once the mouse has stopped moving on the screen, I press the power button (which for me makes my computer sleep). When I do this 1 of 2 things happen; either it goes to sleep as instructed, or it stays on indefinitely, and I have to hold the power button for 5 seconds to do an emergency shut-down. This is a pain, especially since nothing is saved, and the computer takes extra-long to turn on the next time.
The real problem is this: about five minutes after the mouse becomes unresponsive, the computer crashes. It is during this five minute period that I can save all my stuff, but if I have been typing non-stop, I may not even notice that the mouse has stopped moving, and so the computer often crashes at unpredictable times. This of course is a major annoyance, and what’s more, sometimes just when I click a link my mouse freezes, and I have to restart my computer or let it crash.
The crash message is DRIVER_POWER_STATE_FAILURE, and comes on a blue screen with a message saying the computer is collecting some error info, and a silly little smiley face. I have come to hate that smiley face.
If you’ve read this far, thank you very much, PLEASE FIND A SOLUTION, MY MOUSE IS PRETTY UNUSABLE AT THE MOMENT
PS. When I feel it is too risky to use a mouse, I use the touchpad. The setting where tapping=clicking really annoys me, and I also don’t like the inverted scrolling. I change these settings on my preferences, but for some reason they are never saved once I turn my computer on. They used to be saved before updating from Windows 8 to 8.1. Any suggestions?

Not actually solved. The problem still happens and isn't limited to me or my headset.
I just want this question out of my sidebar and this is the only way to do that!

Reports with prompting stop working when moved from Crystal10 to crystal 11

Issue:
We are having trouble with Crystal Reports XI. It appears that the Crystal 10 runtime included the ability to process reports that used prompting. If we run the same report with the Crystal XI runtime, it fails.
I can send a sample of the report.
Error Dialog:
Title: Internet Explorer Script Error
Error Details:
An error has occurred in the script on this page
Line: 1
Char: 1
Error: invalid character
Code: 0
URL: file: /// C:/Program%20Files/Business%20Objects/3.0/crystalreportsviewers11/prompting/js/promptengine_strings_en.js
Do you want to continue running scripts on this page?
Yes/No
Our Configuration:
We use Merge Modules that install Crystal Reports through the browser via a CAB file that we created. It runs a setup executable
The setup executable project that installs CR XI uses the following Merge Modules:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of your hot fixes)
Observation:
When the install is finished, the folder structure under u2026. Crystalviewers11/prompting do not have any files like they do if we install the development environment.
Question:
What do we need to do to correct this situation?
*why the reports with*
*prompting stops working when it is moved from a Crystal 10 to Crystal 11*
*environment. I believe that it has something to do with Merge Modules*
*because the files under the prompting folder do not populate with the*
*merge module like they do with the full install of Crystal Reports.*
Please help.
Best Regards,
Peter Freeman
Edited by: Vivek Kumar Sharma on May 19, 2009 3:43 PM

We have JDK 1.6 installed. The License Merge Module is not related to
this issue.
The files under \Program Files\Common Files\Business
Objects\3.0\crystalreportviewers11\prompting are not being installed.
If we copy files, into this folder structure the reports work.
One of the Business Object's Merge Modules should install the files
there rather than just an empty folder structure.
I got was able to figure out how to enter a customer support message.
They said that they could not support us because we were not on CRXIR2
(Crystal Reports 11 Release 2).
I found a download for CRXIR2SP4 (same thing service pack 4).
I installed it the Merge Module names changed to include a "_5"
Was:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of
your hot fixes)
Now:
CrystalReports11_5_RDC_Reportengine.msm
CrystalReports11_5_RDC_Runtime.msm
CrystalReports11_5_RDC_License.msm (should have been included)
*CrystalReports11_HotFix_Merge.msm (not needed anymore)
I will try to put a installer together with these. If this work there
will be some complexity around uninstalling the old one and installing
the new one.

Airport card on MacBook stops working when moved

Hi everyone, I've had this issue with my MacBook and I really don't know what to do anymore right now, so I hope someone here could give some advice.
Last week my Wifi stopped working properly. I noticed that nothing connected anymore, and then it turned out that the whole Wi-Fi dialogue became unresponsive. The list of networks didn't update, it was continuously scanning for networks, and in the network preferences, the Wi-Fi showed up as being off. Clicking the button to turn it back on didn't do anything (it wasn't greyed out, I could click on everything).
I came to the conclusion that this seemed to happen only when I moved the MacBook. The WiFi was fine when I just sat at my desk all day, but most of the time when I went to another room with it, this happened.
I was on the phone with Apple support for a few days. They suggested several things to test. We tested, we waited, I observed, we tested again, waited observed. Needless to say, the problem persisted. After a few days I was advised to reset my MacBook completely. So I did, waited observed, and it still happened.
I was then advised to go to the Apple store. I spoke to a Genius, he told me that the Bluetooth wasn't working and that it's probably the same issue. He told me they would replace the AirPort card and that would probably fix the issue. Several days later I got a call that this didn't fix the issue and that they would have to replace the logic board. At this point I had to keep telling the people from the Apple store what the actual problem was, which is that the WiFi stopped working after a while when I moved my MacBook sometimes. They kept reassuring me that it was the same as the Bluetooth and kept referring to the Bluetooth in all communication. I asked them to test the WiFi first, which they obviously didn't do, since they didn't know that was the issue, before I authorized replacing the logic board. They said ok and that they would call me before the store closes on the same day.
Well I didn't hear from them, and eventually after a few days when I called them to see what's happening with it, they told me they replaced the logic board and that it was all working. I picked it up, I went home, I used it for a couple of hours and then the WiFi thing happened again. So this is where I'm at right now.
So, where do I go from here?
I am really dependent on my MacBook atm, as I'm finishing up my PhD thesis. I'm also not rich, so I can't have all parts of my MacBook be replaced to see if anything ends up working. I figure I might as well buy a new one if that's the only possibility?
Every Apple employee I've been in contact with was really friendly, so I can't complain about that, but I feel like nobody is really looking at the actual issue that I'm having, so handing the MacBook in for repairs again really worries me (apart from the fact that it takes a lot of time that I shouldn't spend if nothing comes out of it).
Does anybody have some advice?

OK totally understand that.
Did they do the following procedures?
Reset SMC
http://support.apple.com/en-us/HT201295
Reset NVRAM
http://support.apple.com/en-us/HT204063
"nobody has informed me of the whole truth of what has actually been done to the MacBook "
It would seem to me that if there was a logic board problem that it would be consistantly there. If moving the MBP causes a failure that would seem to be a connection problem. Specifically the connection to the WiFi/BlueTooth board.
Have the Apple Hardware test ready to run:
OS X Yosemite: Use Apple Diagnostics or Apple Hardware Test
and the next time it fails see if you can get it to kick out a failure code. Then they'd have to replace the logic board.

Post Moved INTERNET-EXPLORER-HAS-STOPPED-WORKING

Post moved not a connection/speed issue http://community.bt.com/t5/Other-BB-Queries/INTERNET-EXPLORER-HAS-STOPPED-WORKING/td-p/625390
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

internet explorer has stopped working. Get this msg quite often. running ver 11 all updates installed
Please read Suggestions for asking a question on help forums and provide the information requested for assistance.
Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015!

MOVED: MediaLive/6150LE TV-out stopped working

Similar Messages

Maybe you are looking for