MOVED: MSI-6378 Question please....
This topic has been moved to AMD SocketA based board.
MSI-6378 Question please....
I am sorry I am being so slow to respond to these questions: I'm at work and will look at the post properly when at home.
However, I have seen this Crucial RAM being advertised. Is it compatible with this Motherboard can anyone tell me??
Begins:
Virtually BRAND NEW opened and tested Crucial 512MB ECC Registered SD-RAM!!!
Module Details:
* Module Size: 512MB
* Package: 168-pin DIMM
* Feature: SDRAM, PC133
* Configuration: 64Meg x 72
* DIMM Type: Registered
* Error Checking: ECC
* Speed: 133MHz
* Voltage: 3.3V
* Memory Timings: CL=3
Selling on Cricial.com/uk for over £90!!!!! LOW starting bid! Cricial part no. CT64M72S4R75
PLEASE ONLY BID if you KNOW and UNDERSTAND that this is ECC REGISTERED RAM and does NOT work in most standard Motherboards, as this RAM is designed for servers.
ECC stands for Error Correction - this ram can correct certain memory paging faults itself, which is why servers normally run ECC to keep them stable. Ends:
I'd appreciate all and any help with this as I have some irons in the fire which will be helped immensly by increasing the RAM.
God Bless & Thank you for looking ( even if you are unable to help )
Hackbridge
Similar Messages
-
Dear all
I have a computer with the MSI-6378 mother board. I'm sure it's very dated, but I would like to increase the RAM which is currently 256MB. Ideally, I would like to increase it to the max which is up to 1.gig?? What would be the best RAM for my PC. If you would want a spec of my PC can you tell me how to get the correct info??? Sorry
Also, I'd like to know exactly how to benchmark the PC to know how well it is performing. If you can help me with these questions I'd be very grateful.
Please accept my apologies if this is in the wrong section and my lack of knowledge on the subject.
Kind regards
HackbridgeI am sorry I am being so slow to respond to these questions: I'm at work and will look at the post properly when at home.
However, I have seen this Crucial RAM being advertised. Is it compatible with this Motherboard can anyone tell me??
Begins:
Virtually BRAND NEW opened and tested Crucial 512MB ECC Registered SD-RAM!!!
Module Details:
* Module Size: 512MB
* Package: 168-pin DIMM
* Feature: SDRAM, PC133
* Configuration: 64Meg x 72
* DIMM Type: Registered
* Error Checking: ECC
* Speed: 133MHz
* Voltage: 3.3V
* Memory Timings: CL=3
Selling on Cricial.com/uk for over £90!!!!! LOW starting bid! Cricial part no. CT64M72S4R75
PLEASE ONLY BID if you KNOW and UNDERSTAND that this is ECC REGISTERED RAM and does NOT work in most standard Motherboards, as this RAM is designed for servers.
ECC stands for Error Correction - this ram can correct certain memory paging faults itself, which is why servers normally run ECC to keep them stable. Ends:
I'd appreciate all and any help with this as I have some irons in the fire which will be helped immensly by increasing the RAM.
God Bless & Thank you for looking ( even if you are unable to help )
Hackbridge -
This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=133271.0Quote
If I were to change the memory clock and/or advanced memory timings and the notebook doesn't post how do I reset CMOS on this model? Do I have to remove CMOS battery and allow discharge or will the notebook auto recover and post using fail-safe defaults?
Apply improper performance settings can lead to instability or refuse to post.
You have to take out CMOS battery to reset it.
So change anything from there only if you are absolutely sure what you are doing and be sure that machine can handle it.
If you want to change anything from there, test the settings 1st from OS [with memset,Nvidia System Tools, clockgen or whatever]
Also OC at own risk...
Gamble there is not an option as you may need to take out the CMOS battery after failure attempt.
If you want to make performance as AMD Pentium 7 ==> that's another story
Quote
Is there any setting in BIOS that can be unlocked that will unlock the GPU core and memory clocks so they can be overclocked in Nvidia System Tools without giving a "The changes made are invalid" error message? Are the GPU and core and memory clocks locked by chipset?
No that can't be done by that way.
I'm not gonna apply permanently GPU OC in BIOS.
So if you gonna OC the GPU, do it from OS like you already did.
Quote
GPU Frame Buffer Size or shall I say "Svet's FB".
"Svet's FB" function is secured as i don't left option to be disabled[which will cause black screen at next boot].
So whatever option from "Svet's FB" to pick it can't lead to troubles.
Quote
Thanks Svet you rock! All the features have been added that I requested and they work flawlessly
Quote
As far as I can tell this modded BIOS is rock solid and I would highly recommend it to anyone. Thanks again! -
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=118925.0Quote
Should I leave the default settings for the Ram or should I change them?
You need to change FSB/Memory Ratio to a setting that will keep your RAM @DDR2-800 when you raise the FSB clock speed to 33 MHz. (Should be set to 1:1.2)
Quote
Should I leave the default settings for the Ram or should I change them?
Should be locked by default.
If you have further questions, please provide FULL and accurate system specs first. Read the >>Posting Guide<< to get an idea of what we need to know. -
MOVED: MSI P35 Neo, Overclocking problems
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=111956.0Quote from: Maesus on 29-October-07, 11:52:50
welcome to the forum.
For overclocking question, please post in the OC forum.
Maesus, Isn't that this forum?
Adomax, I feel for you.
I can only get about +10% out of the FX60 on my RX480 Neo2 (MS7151). :( -
SD Questions Please Send The Answers
Hai
Here i have attached some SD Interview Questions .Please Send the Answers .
Awaiting For Ur Replay - Please Mail Me [email protected], And [email protected]
Thanks
S.Siva
1. Five steps of implementation with full details.
2. What is ticket? Process flow ticket?
3. What is ticketing tool? What is SODA?
4. How to stop PGI?
5. Details about SLS.
6. Details about the Gap analysis. (What are the gaps you have faced?)
7. What is meant by landscape? (Landscape of your project for example)
8. In which scenario we go for different pricing procedure at orders and billing?
9. Cut over activity means what?
10. In real-time project, how many pricing procedures to be used?
11. What are the tools used to communicate with the client?
12. Any three major issues faced in the support project?
13. Difference between SD account key and FI account key?
14. How to post goods receipt from storage location to warehouse? What is the movement type?
15. Tcode for listing blocked documents?
16. What is the advantage of using the text as reference instead of duplicating it?
17. Have you ever applied BPR (Business Process Reengineering) in an implementation project?
18. To perform material configuration, which system one has to use in landscape?
19. What is the tcode for creating number range for a sales order type?
20. Difference between centralized credit mgmt and decentralized credit management.
21. Where do u configure in development server or application server or in testing server?
22. Details about clients.
23. What is an abap query? Why it is used?
24. What are the steps for end user training in sap SD module?
25. Difference between discount and rebate.
26. When is material determination got triggered?
27. A customer wants to buy two materials / one is 3rd party material (Item category: TAS) / another one is normal material (Item category: TAN). His requirement is he wants a single invoice for both items without splitting? How can we do this?
28. In consignment fill up, we deliver goods to customer site, is there any agreement with customer? If yes means, what type of agreement relating price?
29. Details about VAT configuration.
30. What is the use of pricing date in condition type?
31. In R/3, we represent a companys structure by defining and assigning corporate structure elements. What is the purpose of doing that?
32. What are the different partner functions can a customer master record serve?
33. What is the difference between condition type EK01 and EK02?
34. What is retroactive billing? Who will create that?
35. In your functional role, how you gather technical specifications for your technical team members from your client?
36. Is it possible to change existing item categories?
37. For cash sale, how will availability check be done?
38. How is the access sequence controlled?
39. User specific parameter means what? How to create that one?
40. What is the difference between listing and exclusion?
41. Difference between customization and configuration.
42. How to customize rebate processing in sap sd?
43. LSMW important step is what?
44. What is the extract used in condition technique of pricing?
45. Can we create credit management separately for two different materials?
46. Work center means what?
47. If the client logon screen deleted while requirement is urgent, then what to do?
48. What is meant by time bond deliveries?
49. After implementing sap in production environment, while creating sales order, client wants to give discount for first 10 sales orders? How to do this?
50. What are the Three different kinds of messages? What is the difference between them?
51. Details about testing at sap sd.
52. What is the access sequence for header conditions?
53. Details about actual GI date and planned GI date .Can actual GI dt differ from planned GI dt?
54. Influencing factors for account determination for invoices.
55. Details about sap best practices.
56. To start a transaction, how many ways are there? And what are they?
57. Who will create transportation request?
58. In realization phase, what will be doing?
59. Is it possible to release change request without releasing task?
60. Details about lean warehouse management.
61. How to customize excise duty, insurance and cess condition type in pricing procedure?
62. How to stop PGI?
63. Data dictionary or repository means what?
64. How do you transfer request from development instance to production or quality instance?
65. What is the importance of release status in condition table?
66. Why does account group controls customer?
67. What are the deliverables in your blue print?
68. If you generate bill more than credit limit, then what will happen?
69. What is the value class used for material creation?
70. Why do we maintain sales office?
71. Is it possible to substitute one product for another? If so, how it can be achieved?
72. What is the difference between ATP check and availability check? How these reflect in sales order?( Which check system considers) what are the img steps for the same?
73. Explain process and steps involved in returns third party order processing.
74. What is the client specific data? Give 2 examples of client specific data.
75. What is the most critical field in delivery document?
76. What is the relation between sap sd and ABAP?
77. What is the functionality of negative posting in billing document?
78. In real time, when we start system in first, what screen we get and tell me the process how to log on screen? (IBM question)
79. How can you check in sap system, how, when and by whom, which fields in the customer master record were changed?
80. What is variant and its configuration?
81. After logging into R/3 system, if you want an end user to see a specific menu . How could you do that?
82. Is it possible to automate output processing?
83. Which data is relevant for crediting credit and debit memos?
84. In system landscape, where the sandbox and golden box client exists?
85. What is the user exists? /how can we create user exists? What is the purpose of that?
86. Details about value sap.
87. Is there any difference between product selection and material determination?
88. How do you transfer request from development instance to production or development instance?
89.What part of the company is responsible for the type of shipping, the necessary shipping materials and the means of transport?What is ticket? Process flow ticket
Handling tickets is called Issue Tracking system. The errors or bugs forwarded by the end user to the support team are prioritized under three seviority High, Medium and Low. Each and every seviority as got its time limits before that we have to fix the error.
The main job of the supporting consultant is to provide assistance on line to the customer or the organisation where SAP is already implemented for which the person should be very strong in the subject and the process which are implemented in SAP at the client side to understand,to analyse,to actuate and to give the right solution in right time.This is the job of the support consultant.
The issues or the tickets(problems) which are arised is taken care of on priority basis by the support team consultants.
The work process in support projects are given below for your reference.
1. The customer or the end user logs a call through any tool or by mail (RADIX).
2. Each one of the support team is a part of support group.
3. Whenever a customer logs a call he /she has to mention to which work group (by name).
4. Once the calls came to the work group the support consultant or the team need to send an IR (Initial Response) to the user depending upon the priority of the calls. (Top,High,Med,Low,None)
5. Then the error is fixed, debugged by the support consultant or the team. Then after testing properly by generating TR(Transport Request through the basis admin)
6. Then it is informed to the end user/customer/super user about the changes which have moved to the production server by CTS process.
These are the process. In summary, what I understand is that if any configuration or customization is required to solve the issue, then the consultant have to work on DEV Client, then the end user will test it in the QA client and after approval the BASIS consultant has to transport it to the PRODUCTION client.
An example:
Tickets in SD can be considered as the problems which the end user or the employee in the company face while working on R/3. Tickets usually occur during the implementation or after theimplementation of the project. There can be numerous problem which can occur in the production support and a person who is working in the support has to resolve those tickets in the limited duration, every ticket has the particular deadline alert so your responsibility is to finish it before that deadline.
To begin with , we should give "TICKET" to you for not knowing it.
Here is an eg of a ticket raise:
End user is not able to
1. Create Sales order for a customer from a New plant , since shipping point determination is not happened . ( Without Shipping point the document becomes INCOMPLETE and he will not be able to proceed further like DELIVERY, BILLING).
He raises a ticket and the priority is set in one of the below:
1. Low 2. Medium 3. High.
Now you need to solve this ticket. You would analyze the problem and identify that the SP configuration has to be done for the new plant.
You would request a transport for DEV CLIENT to BASIS. You do the change and Request one more Transport to BASIS for QA client. The End user will test the same by creating a sales order for the new plant and approve it.
Finally, you request a transport to move the changes to PRODUCTION. Once the change is deployed in production the TICKET is closed. What I have given is a small example. You would get some real issues with severity HIGH in your day-day support.
Regards. -
This topic has been moved to VGA products.
MSI Video CardPlease read and comply with the Forum Rules.
this is a user-to-user forum. no-one from MSI visits here.
maybe you will get better help if you give full details of your PC system, and try to explain in more detail your problem
PS you've also posted in the wrong forum, this one is for MSI's TV tuner cards. i'll move it to the right area. -
Hi I have built the following system
MSI-6378
AMD XP2000+
Maxtor 60Gb HDD
AOpen CD-RW
Epson C42UX
Genius Vivid 3XE Scanner
256Mb PC133 Mem
MS XP Pro
I have set two user profiles in XP but after a while computer resets then damages one then both the profiles. Have tried re-install with same effect.
Installed Win 2000 pro. Set up two user profile. Computer resets and will not enter second profile.
Re-installed with one profile. PC still resets but can return to profile. I had a page-fault error when re-installing.
Turning off power management in BIOS means PC will not even start Win 2000.
Updated 4in1 drivers pc seems better.
Cannot install USB scanner now - does not recognise correct ID and so doesn't load correct drivers.
Questions:
1) Has anyone had these problems
2) Does it sound like motherboard is damaged - how can I tell.
3) Why are 4in1 and video drivers on MSI site, older than the ones on the VIA site.
4) Any suggestions about scanner. It works on another PC with VIA chipset and 2000. Also worked under XP with this PC.
CheersHi,
You can't just replace the mainboard and expect Windows to start again.
You could repair Windows, but if you don't know how, install Windows from scratch again.
BTW your CPU should run at 133FSB :D -
Hi all,
I have a couple of Questions Please answer
what is the basic principle inwhich lsmw was developed
Can we transfer standard text between diffferentclients
Difference between Session and call transaction
In domanin we have lower case key. If we check it and enter values the values are not entering in lower case.
Labels canot be printed in smart forms can we print in scripts
Routines cannot be written in smart forms we can print in scripts? what are routines.
which view can be used in Select Statements
How to add fiends into standard tables apart from Append structures
I cam to know that in selection screen if we enter value in one field the fields can be filled by its corresponding values . Eg: If we enter material no field then the correspondig values will
be entered into other select options Plant and stotrage location.
If can to know that it is possible through fuction module f4in_table_value_equest. I tried this but iam unable to get the result.
I saw in search help docmentation that through import and export parameter it is possible.
when to use upload function module is used and please give example
if you have 20000 thosand records and if there is a problem in 11000 th record in a standard reprot how to rectify it
Debugging in smart forms
what is the use of log data changing check box in technical settings screen of se11
how to find base table name for fields of a screen usnig sql trace (st05)
what is the difference between database view and maintenance view
Please clear my doubt
Thanks in advance
Ranjith> what is the basic principle inwhich lsmw was
> developed
>
> Can we transfer standard text between
> diffferentclients
<b>Run the program RSTXTRAN.</b>
> Difference between Session and call transaction
<b>http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm</b>
> In domanin we have lower case key. If we check it and
> enter values the values are not entering in lower
> case.
<b>It cannot be that way.</b>
> Labels canot be printed in smart forms can we print
> in scripts
> Routines cannot be written in smart forms we can
> print in scripts? what are routines.
<b>Routines are subroutines in which we can write our own code without disturbing the driver program.</b>
> which view can be used in Select Statements
<b>Database view.</b>
> How to add fiends into standard tables apart from
> Append structures
>
> I cam to know that in selection screen if we enter
> value in one field the fields can be filled by its
> corresponding values . Eg: If we enter material no
> field then the correspondig values will
> be entered into other select options Plant and
> stotrage location.
<b>Use the fm dynp_values_update</b>
> If can to know that it is possible through fuction
> module f4in_table_value_equest. I tried this but iam
> unable to get the result.
> I saw in search help docmentation that through import
> and export parameter it is possible.
>
> when to use upload function module is used and please
> give example
>
> if you have 20000 thosand records and if there is a
> problem in 11000 th record in a standard reprot how
> to rectify it
>
> Debugging in smart forms
<b>Write the statement break-point <your user id> in the command lines.</b>
> what is the use of log data changing check box in
> technical settings screen of se11
<b>Log data changes
The logging flag defines whether changes to the data records of a table should be logged. If logging is activated, every change (with UPDATE, DELETE) to an existing data record by a user or an application program is recorded in a log table in the database.
Note: Activating logging slows down accesses that change the table. First of all, a record must be written in the log table for each change. Secondly, many users access this log table in parallel. This could cause lock situations even though the users are working with different application tables.
Dependencies
Logging only takes place if parameter rec/client in the system profile is set correctly. Setting the flag on its own does not cause the table changes to be logged.
The existing logs can be displayed with Transaction Table history (SCU3).</b>
> how to find base table name for fields of a screen
> usnig sql trace (st05)
<b>Go to st05.
Start trace.
Run the required program.
Deactivate the trace.</b>
> what is the difference between database view and
> maintenance view
>
>
> Please clear my doubt
> Thanks in advance
>
> Ranjith -
I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?
Hi AlphaCentori,
If you are having issues accessing the Apple ID that was used to originally purchase those apps, you may find the following article helpful:
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden -
I want to ask you question please i have free apple id because i am still a college boy who doesn't have any of credit visa card and i just want to download beautiful apps on my phone including whats app but they require payment information to complete my request so please help me and please find a solution for this problem because not everyone have credit or master card .
Buy an iTunes gift card.
http://www.apple.com/support/itunes/cards-codes/ -
i updated my ipod ,but before it work completely the screen turn blue,then white and now it doesnt work even if it charge. So, what do i do? PLEASE ANSWER MY QUESTION PLEASE TELL ME WHAT TO DO so i todd what others did then i did it but it kept showing the apple sign and now turn to blue again the turn yellow now white. Apple please fix it i havent been able to be gone at all past few days because of this also tries to connect with my labtop didnt work whats up with it. for people who didnt update it wait until they fix it beleive me
it still blinking with the apple sign
-
dear, i have a question please. if i want to keep a folder of pictures in my icloud account; then delete this folder off my phone would it be deleted from icloud account too?? cause im running out of memory on my iphone
thanksYou can't use icloud to store photos. There's a service called photo stream which is used to sync photos from one device to another, but this can't be used to store photos permanently.
Always sync photos from a device to your computer, Then you can delete them from the device.
Read this... import photos to your computer...
http://support.apple.com/kb/HT4083 -
I want to change my apple id password but I forgot the security questions please help me some using my icloud I'd and if confirmation is must so please phone number is mine please send a code please help me my apple
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do. -
Hi guys i forgot the answers of my security question please tell me what sould i do ??
hi guys i forgot the answers of my security question please tell me what sould i do ??
Alternatives for Help Resetting Security Questions and/or Rescue Mail
1. If you have a valid rescue email address, then use this procedure:
Rescue email address and how to reset Apple ID security questions.
2. Fill out and submit this form. Select the topic, Account Security. You must
have a Rescue Email to use this option.
3. This is the only option if you do not already have a valid Rescue Email.
These are telephone numbers for contacting Apple Support in your country.
Apple ID- Contacting Apple for help with Apple ID account security. Select
the appropriate country and call. Ask to speak to the Account Security Team.
4. Account security issues almost always require you to speak directly to an
Apple representative to securely establish your identity as the account holder.
You can set it up so that Apple calls you, either immediately or at a time
convenient to you.
1. Go to www.apple.com/support.
2. Choose Contact Support and click Contact Us.
3. Choose Other Apple ID Topics and choose the appropriate topic for
your issue.
4. Follow the onscreen instructions.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
Apple ID- All about Apple ID security questions.
Maybe you are looking for
-
How do i get to watch something that will only open with window's media?
Sorry if this is a dumb question but we are new to the mac and have been trying to get some way to get windows media videos to play on our new mac. I tried to download the software to let them play on quicktime but it says that it can't play on an in
-
Macro media dream weaver - table function
Macro media dreamweaver mx 6 - Table function stopped working, Why?
-
How do I delete the MRU files within StarOffice 6.0? Is there a way to configure the program so that a file's location and file is not displayed under the "Files" menu?
-
Hi everyone, Even though SAP is not recommending core modification, we have a requirement to do core modification in VA02 transaction. As per the requirement if user goes to Deliver menu (VA02 -> Enter -> Sales Document -> Deliver) by default it goes
-
NI LabVIEW 2014 Digital Electronics FPGA Board Driver
Hello all, When NI LabVIEW 2014 Digital Electronics FPGA Board Driver Release date? Thanks.