MOVED: MSI 785GT-E63 problems with temps and temp hardware

This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=140927.0

I also use cpuid hwmonitor to check temps n volts 12 vlt rail is at 12.05 during load. The gpu load temps on the lightning nvr exceed 72c at stock and 76c with the oc. Should I get a new mobo? Compatibility issue? I was looking at a asrock 990fx extreme 3 as this would allow me to upgrade my CPU later if I choose. I am on my current main pc bc bulldozer didn't grab me. Some benches r less than the x6s, my two 6970s perform btr than a single 7970 for my needs and the only increase I would see is if I got two 7970s that's way to much coin n would be bottlenecked by my current CPU I'm sure. Any ideas? I'm at a loss

Similar Messages

  • MOVED: MSI 785GT-E63 BIOS S5 is out. But my board is dead after flashing :(

    This topic has been moved to BIOS.
    https://forum-en.msi.com/index.php?topic=141730.0

    1. CPU fan is only one, its goes to CPU FAN header.
    2. See here: https://forum-en.msi.com/index.php?topic=127129.0
    The keyboard key for boot menu is F11
    3. What "dead usb port"?
    Quote
    I plugged my USB keyboard/mouse in the back and it didn't work, but I plugged it into any of the other 4 USB ports and it worked.
    Assemble user's error. Check for properly connections here: >>If you are having problems with USB ports, read this topic.<<
    Quote
    Additional Notes: It does boot into my old installation of Windows just fine. Do I just need to install the new drivers/utilities to make sure the motherboard works? Any advice would be appreciated, thanks!
    It's recommended to perform a new fresh OS installation

  • MOVED: MSI 785GT-E63 CPU Help

    This topic has been moved to AMD64 ATI/SiS/VIA boards.
    https://forum-en.msi.com/index.php?topic=153373.0

    What do you do by the computer? Modern processors are rather powerful, and I bet you whatever you choose it will live rather a relaxed life 99 % of the time.
    That said, I think if you have the opportunity and cash you should go for the most expensive processor you can. I hope that means the 6-core processor.
    We usually want people to say what their PSU is, so we can laugh at them and tell them they made a bad choice: What PSU have you got?

  • XP SP3 MSI 785GT-E63 crash and reboot

    Whenever I start certain programs the OS crashes and restarts, and comes back with this error code;
    BCCode:10000050 BCP1:FF8F0005 BCP2:00000001 BCP3:8056211D BCP4:00000000 OSVER:5_1_2600 SP:3_0 Product:256_1
    I have tested the RAM with Memtest86+ multiple passes 0 errors.
    It's mostly games and catalyst software.  Any help would be greatly appreciated.
    MSI 785GT-E63 Rev 1.0 Motherboard (BIOS 12-31-2009)
    Kingston HyperX DDR2-800 2x1GB (2.0 voltage 4-4-4-12 timings)
    AMD Athlon II X3 440 (not unlocked or overclocked)
    HD 4200 Onboard Video
    Maxtor 120GB IDE ATA133
    LiteOn iHAS424 DVD SATA
    Windows XP Pro SP3 32-bit
    Enermax 485w PSU

    Quote from: Stu on 27-August-10, 14:28:41
    Bug Check Code 10000050 is also referred to as STOP 00000050 or as
    STOP 0x50. The name assigned to it is PAGE_FAULT_IN_NONPAGED_AREA
    Thanks, Stu
    Quote from: Semprini on 27-August-10, 07:40:27
    Thanks for all the great input.
    These problems have been going on for the past 3 weeks since building the PC.
    I am using Catalyst 10-7 version for video drivers.
    I used auto timings on RAM when I first built the PC and the same problem came up, will try it again though.
    The programs that cause the crash; Catalyst drivers setup(10-4 and 10-7 both cause the crash), Farcry 2 (when un-installing Farcry 2 the crash happens). If I don't start the programs there is no crash.  Most types of programs work with no problem, Nero, Padus, Handbrake, AutoGK, Mozilla.
    I'll try to get a BSOD code.
    Enermax PSU EG495AX-VE(W) Noisetaker
    I've had doubts about the PSU before but checked it with a tester and against other PSU's. I still don't trust it, maybe I'll just replace.
    Once again thanks for everyone's advice.
    Do you have Avast installed or other 3th party AV or firewall software?
    Any OC?
    Shows us screenshots from CPU-Z, all pages. ==> http://www.cpuid.com/downloads/cpu-z/1.55-setup-en.exe
    How to shows images in a forum ==> https://forum-en.msi.com/index.php?topic=90789.0
    Check stability with Orthos:
    https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534

  • MSI 785GT E63 questions...

    Hi everyone, I just built my desktop and a few things don't seem to be working right. My basic setup:
    MSI 785GT-E63
    AMD Athlon X2 64 Windsor
    Seasonic 520W PSU
    4x1GB Crucial DDR2 800 MHz
    1. I have two CPU fans because I bought an aftermarket CPU cooler. One of them doesn't work. Do I have to plug them in into certain places? The BIOS says only "System Fan 2" is working, not "Systen Fan 1".
    2. How do I get it to boot using a USB stick? I plan on installing Windows 7 through USB and I can't seem to find an option for it. I am used to seeing something like "Boot Priority" or something. Do I just press a key on the screen that shows the whole MSI thing? Normally I press "DEL" for the BIOS menu. Should I press something like F12 for boot menu?
    3. Is it common for new motherboards, or MSI motherboards, to ship with dead USB ports or did I wire up something wrong? I plugged my USB keyboard/mouse in the back and it didn't work, but I plugged it into any of the other 4 USB ports and it worked.
    Additional Notes: It does boot into my old installation of Windows just fine. Do I just need to install the new drivers/utilities to make sure the motherboard works? Any advice would be appreciated, thanks!

    1. CPU fan is only one, its goes to CPU FAN header.
    2. See here: https://forum-en.msi.com/index.php?topic=127129.0
    The keyboard key for boot menu is F11
    3. What "dead usb port"?
    Quote
    I plugged my USB keyboard/mouse in the back and it didn't work, but I plugged it into any of the other 4 USB ports and it worked.
    Assemble user's error. Check for properly connections here: >>If you are having problems with USB ports, read this topic.<<
    Quote
    Additional Notes: It does boot into my old installation of Windows just fine. Do I just need to install the new drivers/utilities to make sure the motherboard works? Any advice would be appreciated, thanks!
    It's recommended to perform a new fresh OS installation

  • MSI 785GT-E63 & Windows 7 x64 : Cool'n'Quiet

    Hello,
    Can you help me to configure my  mainboard to active  Cool'n'Qiet and Windows 7 x64.
    I have Cool'n'Quiet : Enable in my Bios.
    I have follow this method for Windows : http://www.vista4beginners.com/power-management
    But my problem is that my CPU fan isn't lower.
    I have try with "Dual  Core Center" and it's work in "Silence mode" but i don't know how configure it to auto launch in "Silence mode"
    I will prefere using Cool'nQuiet without other software like "Dual Core Center" but if there aren't other solution i will use it.
    Thanks for reply.
    Excuse me for my English : a litthe frenchy
    Config :
    MainBoard : MSI 785GT-E63
    CPU : AMD DUAL CORE - X2 7750 oem 2.7GHz L2 1Mo et L3 2Mo 95Watts socket AM2+
    CPU FAN : ZALMAN - CNPS9300 AT
    Mem : 4 Go ( 2x KINGMAX - DIMM - 2 Go - PC - 8500 1066 MHz - KLEE88F-B8KB5 )
    Disk : Raid1 : 2x HITACHI DESKTAR - P7K500 - 500 Go IDE - 7200t - 8 Mo cache
    OS : Windows 7 x64

    Quote from: Bas on 23-October-09, 20:14:59
    Go into the BIOS and look for Smartfan or SmartFantarget, something like that.
    Enable it and set the right values.
    That does normally the fan controlling.
    Thanks but, what are the right values ?

  • Overclocking using a MSI 785GT-E63.

    Here is my current setup and settings that would most likely matter:
    AMD Athlon 64 X2 5600+ Windsor 90nm (2.8 GHZ stock)
    4x1GB DDR2 800 MHz
    Seasonic 520W PSU
    MSI 785GT-E63 ATX Motherboard
    Memory is error free according to memtest86, CPU and motherboard and PSU are proven to work fine. Here are the overclock settings:
    2.8 ---> 3.29 GHZ
    Using an upgraded CPU cooler and the CPU runs very cool.
    CPU: 1.495V
    x14 Multiplier
    235 MHz FSB
    100 MHz PCIe (Locked)
    x4 HT Multiplier (~900 MHz HT)
    FSB RAM Ratio of 667 MHz, 1.66 (RAM speeds are around 740 MHz according to BIOS)
    Stock CPU-NB, NB, and RAM Voltages.
    Stock RAM Timings.
    Passed 30 Minute OCCT Linpack Test (Max 55 Deg C)
    Passed 2 Hour 40 Minute OCCT Standard Test (which is good enough to me)
    Windows 7 64 Bit
    Now, when I change the settings to anything higher than 235 FSB at the x14 multiplier, I get certain BSODs that I've been trying to figure out. One was "BAD POOL CALLER" and the other was "MEMORY MANAGEMENT".
    The FSB limit is definitely not at 240, because I have done 270x12, and 240x13 before. I keep reading many OCing guides and nothing seems conclusive. The NB temperature doesn't seem to get high. System temperature seems to be NB Temperature according to answer I got on these forums (and it's 32 C), and when I touch it I barely feel any heat at all.
    Some say to raise CPU-NB Voltage, and some say to raise the NB Voltage. Should I raise one, or the other, and how high should I raise the voltages? I would like people experienced with this specific motherboard/similar motherboards to help me out. The north bridge seems to be cooled only by a heat sink, and not a fan if that means anything. I don't think I need to raise the CPU voltage because it is pretty high as is. I'm really thinking it is all memory related...but memtest says the memory is ok.
    Any help appreciated!

    New settings.
    2.8 ---> 3.36 GHZ
    Using an upgraded CPU cooler and the CPU runs very cool.
    CPU: 1.525V
    CPU-NB: 1.376V
    x14 Multiplier
    240 MHz FSB
    100 MHz PCIe (Locked)
    x4 HT Multiplier (~900 MHz HT)
    FSB RAM Ratio of 667 MHz, 1.66 (RAM speeds are around 740 MHz according to BIOS)
    Stock NB, and RAM Voltages.
    Stock RAM Timings.
    Passed 30 Minute OCCT Linpack Test (Max 56 Deg C)
    Passed 2 Hour 40 Minute OCCT Standard Test
    Windows 7 64 Bit
    It's very stable and I'm happy with it.

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • Problem with Roles and Triggers

    I'm having a strange problem with Roles and Triggers in Oracle. It's a little difficult to describe, so bear with me...
    I'm trying to create a trigger that inserts records into a table belonging to a different user/owner. Of course, the owner of this trigger needs rights to insert records into this other table. I find that if I add these rights directly to the owner of the trigger, everything works okay and the trigger compiles successfully.
    However, if I first create a Role and grant the "insert" rights to it, and then assign this role to the owner of the trigger, the trigger does not compile successfully.
    To illustrate this, here's an example script. I'm using Oracle 10g Release 2...
    -- Clean up...
    DROP TABLE TestUser.TrigTable;
    DROP TABLE TestUser2.TestTable;
    DROP ROLE TestRole;
    DROP TRIGGER TestUser.TestTrigger;
    DROP USER TestUser CASCADE;
    DROP USER TestUser2 CASCADE;
    -- Create Users...
    CREATE USER TestUser IDENTIFIED BY password DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" QUOTA UNLIMITED ON "USERS";
    CREATE USER TestUser2 IDENTIFIED BY password DEFAULT TABLESPACE "USERS" TEMPORARY TABLESPACE "TEMP" QUOTA UNLIMITED ON "USERS";
    CREATE TABLE TestUser.TrigTable (TestColumn VARCHAR2(40));
    CREATE TABLE TestUser2.TestTable (TestColumn VARCHAR2(40));
    -- Grant Insert rights on TestTable to TestRole...
    CREATE ROLE TestRole NOT IDENTIFIED;
    GRANT INSERT ON TestUser2.TestTable TO TestRole;
    -- Add TestRole to TestUser. TestUser should now have rights to INSERT on TestTable
    GRANT TestRole TO TestUser;
    ALTER USER TestUser DEFAULT ROLE ALL;
    -- Now, create the trigger. This compiles unsuccessfully...
    CREATE TRIGGER TestUser.TestTrigger AFTER INSERT ON TestUser.TrigTable
    BEGIN
    INSERT INTO TestUser2.TestTable (TestColumn) VALUES ('Test');
    END;
    When I do a "SHOW ERRORS;" after this, I get:
    SQL> show errors;
    Errors for TRIGGER TESTUSER.TESTTRIGGER:
    LINE/COL ERROR
    2/3 PL/SQL: SQL Statement ignored
    2/25 PL/SQL: ORA-00942: table or view does not exist
    SQL>
    As I said above, if I just add the Insert rights directly to TestUser, the trigger compiles perfectly. Does anyone know why this is happening?
    Thanks!
    Adrian

    Hi Raghu,
    If the insert rights exist only on TestRole, and TestRole is assigned to TestUser, I can do the INSERT statement you suggest with no problems if I just execute it from SQLPlus (logged in as TestUser).
    The question is, why does the same INSERT fail when it's inside the trigger?

  • Problem with TextInput and RadioButton

    Hi,
    I've encountered a problem with TextInput and RadioButtons.
    I've created some text fields and radio buttons for a
    feedback form under a movie _root.feedback.
    But for some reason, I can't seem to enter text into the text
    field (no blinking cursor), and I can't see the "label" next to my
    radio buttons.
    Just as a workaround, I tried moving these fields to _root,
    and now I can enter text and see the radio button labels.
    But to keep my hierarchy clean, I want to use a the
    _root.feedback movie for my feedback fields. Any ideas what could
    be going wrong? I checked Window -> Component Inspector, and
    these textInput fields are enabled.
    Stuck.
    Thanks.

    Is the text the same color as the background or do you need
    embedded fonts?

  • Problems with Mail and Safari

    Hi,
    I'm running OS 10.11 and am having some consistent problems with Mail and Safari on my MacPro Dual 2.66. Here they are:
    Sometimes, for no apparent reason, selecting these applications from the dock no longer opens the application (or a new window if already opened), but causes them to be revealed in the finder.
    In Safari, when this problem occurs, another symptom seems to be that new windows will ONLY open in a new tab, even though I have preferences set to open links in a new window. If I click on a bookmark within a folder in the bookmark toolbar, Safari will open ALL the bookmarks in the folder in new tabs!!
    In Mail, when I open my Inbox, clicking on various messages will highlight (in blue) ALL the messages I'm clicking on, instead of simply displaying the highlighted message in the reader.
    The only way to get things back to normal is to reboot my machine, which is getting to be a total drag, especially since this seems to happen fairly often.
    One other thing that may be related- if my screen saver is running, and I move the mouse to go to an active screen, the computer will "freeze." It stays like this indefinitely- I figured out that if I press the button on the machine itself it will go to sleep, and I can wake it up and then everything is fine, but I don't understand what's going on.
    I have tried using Disk Utility and Disk Warrior, and have used OnyX to clean out my system cache and aall sorts of other stuff, but to no avail.
    Is anybody else experiencing any of this? I'm starting to get really frustrated. Thanks for any advice.
    Cheers,
    Andrew

    Scott,
    I had posted earlier that I had Flash payer problems and then QuickTime and PDF preview problems too, on my Intel PowerMac. I could not figure out what the problem was, because fixing permissions and moving plugins did not work. Console indicated that the Quicktime components were not found, with the problem in a webkit pref file somewhere (nil field value). Anyway, I bailed and reinstalled Leopard from a 10.5.0 DVD, and then updated using the combo updater to 10.5.3. Everything worked. Then, after the 'Java for Mac OSX 10.5 Update 1', it all broke again. This time, repairing permissions resulted in:
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/lib/jvm.cfg", should be 0, user is 95.
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/classlist" , should be 0, user is 95.
    Now it all works again. This is obviously a flaw with the Java update, and also somehow Disk Utility did not find it earlier. Anyway, take a look at reverting the Java update, or manually changing user for those files (I suppose user 0 is root, but maybe it is nobody).
    Obscure....

  • MSI 785GT-E63 CPU Help

    I have the MSI 785GT-E63/780GT-E63 motherboard and I am needing to know what would be the best AMD cpu for htis motherboard. I know the AMD Phenom II X4 980 HDZ980FBGMBOX Black Edition Processor - Quad Core, 6MB L3 Cache, 2MB L2 Cache, 3.70 GHz, Socket AM3, 125W, Fan, Unlocked, Retail and the AMD HDE00ZFBGRBOX Phenom II X6 1100T Black Edition Processor - Six Core, 6MB L3 Cache, 3MB L2 Cache, 3.30GHz, Socket AM3, 125W, Fan, Unlocked, Retail will fit but which would be the best as far as being the fastest for this motherboard or can you suggest a faster cpu for this?

    What do you do by the computer? Modern processors are rather powerful, and I bet you whatever you choose it will live rather a relaxed life 99 % of the time.
    That said, I think if you have the opportunity and cash you should go for the most expensive processor you can. I hope that means the 6-core processor.
    We usually want people to say what their PSU is, so we can laugh at them and tell them they made a bad choice: What PSU have you got?

  • I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?

    I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?

    Moved to InDesign forum.
    You can start by telling us what the problem is.

  • Problem with JFrame and busy/wait Cursor

    Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
    for the duration of some operation (usually just a few seconds).
    I can get it to work in some situations, but not others.
    Timing does seem to be an issue.
    There are thousands of posts on the BugParade, but
    in general Sun indicates this is not a bug. I just need
    a work-around.
    I've written a test program below to demonstrate the problem.
    I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
    I have not tested on Windows yet.
    When you run the following code, three JFrames will be opened,
    each with the same 5 buttons. The first "F1" listens to its own
    buttons, and works fine. The other two (F2 and F3) listen
    to each other's buttons.
    The "BUSY" button simply sets the cursor on its listener
    to the busy cursor. The "DONE" button sets it to the
    default cursor. These work fine.
    The "SLEEP" button sets the cursor, sleeps for 3 seconds,
    and sets it back. This does not work.
    The "INVOKE LATER" button does the same thing,
    except is uses invokeLater to sleep and set the
    cursor back. This also does not work.
    The "DELAY" button sleeps for 3 seconds (giving you
    time to move the mouse into the other (listerner's)
    window, and then it behaves just like the "SLEEP"
    button. This works.
    Any ideas would be appreciated, thanks.
    -J
    import java.awt.BorderLayout;
    import java.awt.Cursor;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import javax.swing.JButton;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.SwingUtilities;
    public class BusyFrameTest implements ActionListener
    private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
    private static Cursor done = Cursor.getDefaultCursor();
    JFrame frame;
    JButton[] buttons;
    public BusyFrameTest (String title)
    frame = new JFrame (title);
    buttons = new JButton[5];
    buttons[0] = new JButton ("BUSY");
    buttons[1] = new JButton ("DONE");
    buttons[2] = new JButton ("SLEEP");
    buttons[3] = new JButton ("INVOKE LATER");
    buttons[4] = new JButton ("DELAY");
    JPanel buttonPanel = new JPanel();
    for (int i = 0; i < buttons.length; i++)
    buttonPanel.add (buttons);
    frame.getContentPane().add (buttonPanel);
    frame.pack();
    frame.setVisible (true);
    public void addListeners (ActionListener listener)
    for (int i = 0; i < buttons.length; i++)
    buttons[i].addActionListener (listener);
    public void actionPerformed (ActionEvent e)
    System.out.print (frame.getTitle() + ": " + e.getActionCommand());
    if (e.getActionCommand().equals ("BUSY"))
    frame.setCursor (busy);
    else if (e.getActionCommand().equals ("DONE"))
    frame.setCursor (done);
    else if (e.getActionCommand().equals ("SLEEP"))
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    else if (e.getActionCommand().equals ("INVOKE LATER"))
    frame.setCursor (busy);
    SwingUtilities.invokeLater (thread);
    else if (e.getActionCommand().equals ("DELAY"))
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    System.out.println();
    Runnable thread = new Runnable()
    public void run()
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.println (" finished");
    public static void main (String[] args)
    BusyFrameTest f1 = new BusyFrameTest ("F1");
    f1.addListeners (f1);
    BusyFrameTest f2 = new BusyFrameTest ("F2");
    BusyFrameTest f3 = new BusyFrameTest ("F3");
    f2.addListeners (f3); // 2 listens to 3
    f3.addListeners (f2); // 3 listens to 2

    I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
    I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

  • Problem with installing and running some applications or drivers

    When installing and installing some items, towards the end of the installation I get this message:
    /System/Library/Extensions/comcy_driver_USBDevice.kext
    *was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
    The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

    Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
    +was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
    Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Maybe you are looking for