MOVED: msi 790fx-gd70 sound problem with VISTA 64 Black

this problem is a Vista-problem, since sound works in XP.
This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=130464.0

Quote from: Bas on 14-July-09, 01:02:26
Simple question, why don't you install Windows raid instead of AMD raid?
The result will be the same but you will be controller independent.
As you are doing mirror, software (Windows) raid can actually be faster.
Also, why aren't you doing RAID5 with all those disks?
It's faster and on top more secure.
Thanks
I thought it is supported on HW so I can implement that. I will try to that in Windows.

Similar Messages

MOVED: MSI KT880 Delta-FSR - problem with multiplier

This topic has been moved to Overclockers & Modding Corner.
MSI KT880 Delta-FSR - problem with multiplier

http://www.rme-audio.com/english/techinfo/nforce2_tweaks_02.htm
wiretrick it so multipliers under 12.5 will work
assuming the cpu is an old unlocked one

Sound problems with vista 32 bit on xfi xtremegamer

hi im havin sound issues with my sound blaster xfi fatality xtremegamer on vista 32 bit. the sound will sound like a skippin cd or sound like it is stuterin for a few seconds than it will play fine than do it again later on. i was wounderin if its a driver issue with vista or my sound card has broke? i had it runnin on xp and had no problems. can anyone help me please as my card is only abot 8 months old so if it could be faltiy i am still covered by warrinty.

I don't know if it's the driver that's causing a problem or if it's one of your components that's causing a problem. All I know is that the X-Fi is working great on my system, both in XP Pro and Vista Business. I'm not 100% sure about this, but I think I installed the driver first and then the software from the leaked Vista Suite that I downloaded from a link in a post on this forum. Never had a problem with any of the previous drivers either, but on the other hand this system was built in november/december last year, so the hardware was fairly new at the time.

MOVED: MSI 790FX-GD70 Crash with Creative SoundBlaster Audigy2???

This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=137899.0

Quote from: 69Rocket-Joe on 24-January-10, 08:38:41
Seems stable now with 4GB. I am freaking amazed. I've been struggling with this for weeks and your advice may have resolved my issue in a couple of hours. Now I seem to have 4 extra GB of RAM along with a couple spare PSU's, an HD, the 9800GT will probably be mine to keep. I may look for a MB/CPU combo deal on Newegg to replace the P4 setup in the living room or the Slot A Athlon in the garage!
-Joe
Right on, the 8gb is not an issue with G.skill it is an issue with AMD CPU's. They have a heck of a time running 4 dimms. I only wrote about g.skill as I had difficulty running 8 gbs of it but it did run awesome on 4gbs with the standard timmings. I tried to overclock it and had some issues and that is why I swtiched out to the OCZ Black edition. I am not sure if I am going to try 8gbs of it as I do not know if it woudl work or not.
Seems the old man club around here likes to put it down a lot but it is good ram! (joking)
If you want to get your RAM running at the 1600 you are going to have to up the DRAM voltage to 1.65 and you may have to up the CPU-NB to 2400MHz to get the advantage of the 1600 RAM. If you do try to use 8 gbs again it will down clock to 1333 with 4 dimms.

Sound problems with vista

i just purchased a new idea center that i thought was top of the line..but the sounds comming out sound like the chipmunks.. How do i correct this or is it the machine sound card??

I agree with Hantula the new audio driver makes all the difference in the world the download is at
http://www.softsea.com/download/Realtek-High-Definition-Audio-Vista-Driver.html (It auto downloads)
There is a High Definition control center/Panel so you can really tweak your sound system 5.1 and 7.1 surround sound. If Realtek only gives you the driver leave me a note and I'll zip the control panel to you it's a small file, but it's like getting a new sound card and it's just for Lenovo systems
lenovo HD audio manager

Strange sound problem with Vista (k8t neo +alc655)

Hi everyone.
I´m having a strange problem regarding the sound.
Everything seems okay but there is no sound at all.
Can someone post a link to the latest drivers for my mobo and for windows vista?
Are there any alternative drivers?
Driver version installed
VIA ac97 enhanced audio controller
6.0.5744.16384
TIA
Seoded

That was the first thing i´ve tried.
The weird thing is that when i runthe latest direveres (6171_Vista_Beta) the system gives me hi messsage "this controlores are only for vista/vista64".
I don´t know what else to do.
Seoded

MOVED: MSI K8N neo2 platinum PROBLEM WITH MAXTOR 300 SATA2

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=93611.0

BTW -
Here's a thread about your prob to check out. I thought it was totally solved for all nvidia chipsets, guess not. Nf3's seem to still have it to some extent. It seems Maxtor is the one that "dropped the ball" this time...
https://forum-en.msi.com/index.php?topic=93492.0

MOVED: MSI K8N Neo-F problem with Maxtor DiamondMax plus 9 slave.

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=95536.0

it has a 150gb FAT32 partition and a 100gb NTFS one.
Old mobo was a FIC AN11, but that is probably erroneous now.
As for the motherboard not recognizing it, the ide cable was loose. after fixing that, it is detected fine in bios.
And computer management now shows "Online" for the drive after I initialized it, but still shows unallocated under it. It is not unallocated.
Anything I can do to ensure I don't lose information?

SOLVED:MSI 790FX-GD70 Freezing probelms?

I recently bought the msi 790fx-gd70 board, along with a amd athlon 2 x2 240 cpu, and 1 stick of kingston hyper x ddr3 1600 2gb ram, now my problem is that the computer keeps halting/freezing at random. I may get 10 minutes without a freeze or it may freeze on boot. I know that the cpu is supported, the bios is at v1.4 and according to the cpu support list, that is fine. Now on the other hand the memory isnt, the code for my memory is KHX1600C9D3/2G. Now i have seen that other kingston memory is supported, eg. the KHX1600C9D3K3/2G. Has it somthing to do with my mem been single channel as opposed to dual channel. 1 stick vs 2. i cant work it out, so that why i posted here, in hope that someone could shed some light
My full system specs are as follows.
AMD ATHLON 2 X2 240
KIGSTON HYPER X 2GB DDR3 1600 CL9 DIMM
MSI 790FX-GD70 MOTHERBOARD
RADEON HD3870 512MB GPU
RAPTOR HDD 150GB
CORSAIR HX620W PSU

Ok back again..lol. After changing a few bits of hardware that i could (graphics card, hdd) (Just thought i would try everything possible before rma'n the ram) I was still plauged by the rebooting, but... i was faced with a
" hypertransport sync flood error" at boot. Which threw me rite of course, now after doing a bit of google'n i found a few people have had this problem with certain msi and asus boards. But what does this mean is wrong, does it still indicate a ram issue or is it now a bios/mb issue? Im so close to rma'n the whole lot and going back to my old rig (at least it worked) I will only rma the ram if i am 100% sure it will fix my problem, no point in wasting money if it wont solve anything.

How to set 1600 timmings on MSI 790FX-GD70

This is how and these are the settings that I use to achieve stable 1600 timings on my OZC Black Edition Ram using the MSI 790FX-GD70 board.
OCZ AMD Black Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) OCZ3BE1600C8LV4GK timmings CL 8 8-8-8-24 1.65volts
Restart computer, Boot into BIOS by pressing "delete" until you see the screen say it is going into the bios. When changing settings in bios use the plus and minus key to make changes.
Select Cell Menu, this is the memory menu where you will adjust most of the timings for your memory
Go into Advanced Dram
Set the following timings settings for your RAM When selecting both you have to scroll down the page and set the same timings for the other dimm. So you are setting one set for one RAM and one for the other.
In the picture I have it set for 2T but I use 1T, 1T is faster but I am showing you the default spec settings of the ram, once complete hit esc and back to the cell menu
continued

I would like to point out that I have my CPU overclocked so that is why I have turned the cool n quiet off. You will also note that some of my numbers are not set at 2400 and that they are a little bit above what I have wrote. This is caused by me trying to get a little more out of my CPU overclock. These settings and multipliers interact with each other so if I set a multiplier at 12 and it shows 2400 but then go and set the FSB frequency a little higher the timing will reflect in the HT link. One note, you can not have your CPU-NB Freq lower then your HT Freq. Just wanted to explain that so you know why my numbers are not exact or a little different from the settings I am showing
Do not replicate my settings for the CPU as they are all different for all systems. I am only showing you the memory settings that you can set from the OCZ 1600 settings that they recommend.
Press escape and hit F10 to save your settings and the computer should post with the timings that we set.
Once you are stable you can then go in and try different settings of your own. Most people will try tighter timings which could relate to 7-8-8-8 or 7-7-8-8 etc. You can experiment once you are stable with the stock 1600 settings.
Your bios should have a User settings section and you can save your settings in their so if you are experimenting and you have to re-boot you can easily load the saved settings that we have done here!
If you mess things us and have to reset the cmos you unplug the maching, wait at least 1 minute and then press the cmos button. Plug machine back in turn power supply back on and the computer will tell you it has an error and to press F1. Press F1 and set the clock, then go into user settings and load the settings that we did here. If at anytime you want the original settings go into bios and select optimised settings and it will load the best settings that it uses to operate. Note that your overclocks and your ram will go back to default settings and any bios settings that you did manually will be gone until you reload them in user settings. If you update your boos, user settings are lost and you would manually have to set the timings again like we did here.
Many ways to go about this and this is the way that I use. I am not saying it is the only way or the best but it does work. I am using stock volts on the CPU and recommended volts for the memory and to raise the NB Freq. Constructive comments are very welcome.

Network problems with MSI 790FX-GD70

Hi All
I have a problem with the onboard network cards.
It only works the first time from cold boot (when the powercable is completly disconnected from the PC, and LAN cable disconnected, turn on PC and then connect LAN cable)
If I shut it it down or restart the computer, then the LAN card disconnects, eg no lights active on either the pc nor the router. But if I do the procedure described above everything works ok again.
Same problem occours with both LAN ports.
My system:
MSI 790FX-GD70
AMD 720BE
4GB Corsair 1600mhz DDR3
2x Asus HD4850 Crossfire
2x Samsung t166 320GB HD
Windows XP SP3
Tried 3 different routers but all with the same error. So everything points towards the motherboard.
Please help.
PearsonDK

Quote from: Fredrik on 09-August-09, 06:19:22
If the LAN-card is disconnected I wonder if the LAN-card is "present" at all. Check Deceive Manager. Please give some PSU info. Problematic booting and falling out devices...
Also, please, what is your BIOS Version? Make sure its 1.4 .
Drivers - have you downloaded the latest ones from MSI's site and installed them for the LAN card?
Man.. is it me, or have there been like 6-7 people coming up with similar LAN issues on this board? I've never known an onboard NIC to have issues.

MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

First post, whoo hooo
So what version of BIOS are u running? I recently installed the two newest versions 2.0 and 2.1, and they both give me problems. With the latest (2.1) I'm getting the same error as you. Returning back to previous BIOS fixed my problems. Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
Let me know if you fix it, thats why im here, .

MSI 790FX-GD70 Random Freezes

Hi I need help. My pc which I bought yesterday randomly freezes from time to time and I don't know why. It started freezing yesterday. I tried changing my memory voltage from auto to 1.5 then to 1.65 still the same. Sometimes when it freezes I hear a nonstop beep sometimes the last sound output just gets repeated nonstop. It doesn't matter what I do, whether the PC is idle or if I'm playing games, it freezes. When I play games I can play for an hour or 2. Here's my specs.
AMD Phenom II X4 955BE 3.2ghz
MSI 790FX-GD70
BIOS ver. 1.1
Kingston 2GB DDR3-1333 Module Name: Kingston 99U5403-002.A00LF
250GB Sata Seagate
Newly Installed Windows XP Pro
nVidia Geforce 7600GT
500w Trend PSU
Going to sleep now. I will reply when I get up later thanks in advance.

Hi,
please test each memory module individually @1.6V and see if the problem still occurs.
Quote
500w Trend PSU
Can you please post the exact model name of that PSU and write down the amperage limits (A) for the +12V voltage rail (or each +12V rail, if it has more than one)?
Quote
nVidia Geforce 7600GT
Does this video card have its own 6-Pin +12V Power connector?

MSI 790FX-GD70 Overclocking Major Issue

Hi guys, I recently purchased the AMD Phenom II X4 955 Black Edition and the MSI 790FX-GD70 motherboard. My current bios version is the v1.1, and it came together with the motherboard.
In Windows, I am easily able to go to from 3.2Ghz to 3.8Ghz by increasing the stock voltage to 1.43V and the multiplier to 18 - 18.5. This is using AMD Overdrive. Stablity tests show everything is good.
After starting windows and implementing these settings into the bios, I realised that whenever I changed the multiplier in the BIOS, (CPU Ratio), the bios ceases to load after restarting, and my monitor shows a 'No Signal' message, which I am guessing that the bios does not even load. I have no problems changing the CPU Voltage or the BUS Speed, but whenever I touch the CPU Ratio, this problem persists.
I believe the default multiplier is 16x. Even when I keep it at 16x, it still gives me this problem.
What is the issue here? Do I require a bios update?

Fish it out, do not use Live Update
>> Use the MSI HQ Forum USB flasher <<

MSI 790FX-GD70 Randomly Freezing

Hello,
I have a really strange problem with this card.
I get random freezes usually whilw browsing and I have to reset my computer.
My setup is:
AMD Phenom II 955 X4 BE
MSI 790FX-GD70
Corsair XMS3 4x2GB 1333MHz (there are two sets 2x2GB TW3X4G1333C9A G)
Connect3D Radeon HD 4850 512 MB
Corsair TX 650W PSU
I've checked Memory running Memtest and it's ok.
Any suggestion?

I've already checked that too.
I get 2 messages just after I reset my system.
1st is an Error:
Quote
Event 6008, EventLog
General
The previous system shutdown at 7:26:34 μμ on ‎25/‎3/‎2012 was unexpected.
Log Name: System
Source: EventLog
Event ID: 6008
Level: Error
User: N/A
Op Code:
Logged: ‎25/‎3/‎2012 7:28:42 μμ
Task Category: None
Keywords: Classic
Computer: AMD-955-X4
Details
EventData:
7:26:34 μμ
‎25/‎3/‎2012
974
DC0703000000190013001A0022009C00DC07030 00000190010001A0022009C003C0000003C0000 000000000000000000000000000000000001000 00000000000
Binary data:
In Words
0000: 000307DC 00190000 001A0013 009C0022
0008: 000307DC 00190000 001A0010 009C0022
0010: 0000003C 0000003C 00000000 00000000
0018: 00000000 00000000 00000001 00000000
In Bytes
0000: DC 07 03 00 00 00 19 00 Ü.......
0008: 13 00 1A 00 22 00 9C 00 ....".œ.
0010: DC 07 03 00 00 00 19 00 Ü.......
0018: 10 00 1A 00 22 00 9C 00 ....".œ.
0020: 3C 00 00 00 3C 00 00 00 <...<...
0028: 00 00 00 00 00 00 00 00 ........
0030: 00 00 00 00 00 00 00 00 ........
0038: 01 00 00 00 00 00 00 00 ........
2nd is a Critical:
Quote
Event 41, Kernel-Power
General
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Log Name: System
Source: Kernel-Power
Event ID: 41
Level: Critical
User: SYSTEM
Op Code: Info
Logged: ‎25/‎3/‎2012 7:28:34 μμ
Task Category: (63)
Keywords: (2)
Computer: AMD-955-X4
Details
EventData:
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 0
But these are errors you get if you reset your system using reset button.
They can't help you identify what made system freeze.

MOVED: msi 790fx-gd70 sound problem with VISTA 64 Black

Similar Messages

Maybe you are looking for