MOVED: MSI 790XT-G45 - OC Switch doesn't work

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=134127.0

You are overclocking, so I moved this topic to the overclocking corner.

Similar Messages

MOVED: MSI 790XT-G45 headless possible?

This topic has been moved to AMD64 ATI boards.
https://forum-en.msi.com/index.php?topic=158069.0

Quote
because the mb I'm currently
What kind of mainboard are you currently using?
Quote
You're missing my point.
I highly doubt that. We are talking about Desktop board here, aren't we? I have not seen the ability to work without a video adapter in many Desktop boards. Server boards, yes. Desktop boards, no (here that kind of ability is rather the exception than the rule).
Quote
Th system is suppose to consume as little power as possible.
An onboard video chip does not consume a lot of power.

MSI 790XT-G45 Various Crashes - Frustrated

Prior to purchasing my MSI 790XT-G45 mainboard everything ran great. However after swapping out my old motherboard for this one I experience many various crashes in different games. Here is a list of some games that crash:
Lost Planet (this one worked prior to swap)
Black Site Area 51
Microvolts
World of Tanks
Games that do work:
Diablo2
Minecraft
Monopoly Here and Now Edition
Halo CE
Any Browser Games
I tried variations of drivers etc. etc. and I have even recently re-installed the whole OS and let windows 7 (yes I'm running 64 bit) pick out the drivers. These games that crash run great but then crash out of complete randomness. Lost Planet get's a windows error message like Microvolts. Blacksite get's more spefic error messages but do not tell any clues as to why those crashes happened. World of Tanks usually just crashes to Desktop without warning with a rare occasion of a Windows error message.
My specs are (this is from dxdiag):
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408-1631)
   Language: English (Regional Setting: English)
System Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
   System Model: MS-7388
   BIOS: Default System BIOS
   Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2 CPUs), ~2.7GHz
   Memory: 4096MB RAM
Available OS Memory: 4096MB RAM
   Page File: 1195MB used, 6992MB available
   Windows Dir: C:\Windows
   DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
   DWM DPI Scaling: Disabled
   DxDiag Version: 6.01.7601.17514 64bit Unicode
DxDiag Notes
   Display Tab 1: No problems found.
   Sound Tab 1: No problems found.
   Sound Tab 2: No problems found.
   Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
   Card name: NVIDIA GeForce GTS 450
   Manufacturer: NVIDIA
   Chip type: GeForce GTS 450
   DAC type: Integrated RAMDAC
   Device Key: Enum\PCI\VEN_10DE&DEV_0DC4&SUBSYS_14503842&REV_A1
   Display Memory: 2785 MB
   Dedicated Memory: 993 MB
   Shared Memory: 1791 MB
   Current Mode: 1366 x 768 (32 bit) (60Hz)
   Monitor Name: AOC V19
   Monitor Model: F19
   Monitor Id: AOC1900
   Native Mode: 1366 x 768(p) (59.790Hz)
   Output Type: DVI
   Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.17.0012.7533 (English)
   Driver Version: 8.17.12.7533
   DDI Version: 11
   Driver Model: WDDM 1.1
  Driver Attributes: Final Retail
   Driver Date/Size: 5/21/2011 06:01:00, 15223912 bytes
   WHQL Logo'd: Yes
   WHQL Date Stamp:
  Device Identifier: {D7B71E3E-4E84-11CF-9F46-5C341FC2C535}
   Vendor ID: 0x10DE
   Device ID: 0x0DC4
   SubSys ID: 0x14503842
   Revision ID: 0x00A1
Driver Strong Name: oem3.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section005:8.17.12.7533:pci\ven_10de&dev_0dc4
   Rank Of Driver: 00E62001
   Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
EDIT: IF YOU NEED ANY MORE INFORMATION LET ME KNOW!!!

Quote
I noticed that in the bios it said my cpu speed was 2.97 Ghz while it's actually 2.7 Ghz. I don't think that'd be causing the problem though.
Remove any OC, go to BIOS setup and load bios defaults.
Quote
Edit: Just ran the windows memory diag and I saw it at 75% complete overall (halfway through pass 2) and there were no errors.
I've told you to use >>Memtest86<<, not windows memory diag.

MSI 790xt-g45 - BIOS not loading

Some time ago, a power surge occurred with no preventative measures. The computer was operational during the outage, and I did not unplug the computer. Upon powering on, there is no splash, beep, or anything of the sort. CPU fan is running, and all four APS LEDs are on.
Directly relevant specs are:
Hiper Type R Mk-II 680W power supply; attempted replacement with Silencer Mk II 750W power supply
MSI 790xt-g45 mobo
Is this borked beyond belief, or is there a chance that this may be recoverable?

Start by clearing the >>CMOS<< with the power cord disconnected.
Test with another stick of RAM.
Test with another CPU.
Test with another graphics card.
Disconnect the hard drive/s during testing.
Process of elimination really. By test each component in turn you'll hopefully find out what's wrong. May be worth taking the motherboard out of the case and running it bare bones on a piece of cardboard during testing.

Z97-G45 HDMI port doesn't work

I have Z97-G45
the HDMI doesn't work
what's the problem? should i install driver for it?

Quote from: flobelix on 03-September-14, 03:26:52
>>Posting Guide<<
Edited

Hold switch doesn't work

got my new iPod, applied my invisible shield, and the come to find out that the hold switch doesn't work
so i drained the battery completely, recharged it, and it started working. but now, out of no where, it stopped working again. just found it on hold and playing in my jacket pocket.
so this time, i tried doing a software restore and drained the battery once (though i didn't let it sit as long as i did last time before charging again) and its still no go. i'm draining it again, and its nearly dead, but still trys to turn on if you press the menu button even if the hold switch is turned on.
anyone had a similar issue? any ideas?

I guess you may need to get it replaced with new one.
Just visit Apple store, if you live by.
Or you can call Apple.
I saw other people's threads complaining hold switch malfunction.
I believe Apple is currently offering no-question repalcement event on any hardware related 5G iPod/video.

MSI 790xt-g45 chipset driver

I bought a new 790xt-g45 mainboard,installed Xp Pro sp3,when i install the chipset driver a message appears saying-could not find driver for your hardware and os not supported.I'f downloaded the latest driver from msi and still receiving the same error mesage.When i use vista the chipset driver installs. Any one have a answer for me?

You used this driver? http://eu.msi.com/index.php?func=driverfile&dno=2427&i=1

High latency with MSI 790XT-G45 under W7

I have decided myself to go for W7 one one of my rigs.I ve got some genuine disks of 32 and 64 and loaded W7 for testing purposes .
As my intention is to use the 790XT-G45 (considering it more W7 suited than my Platinum beeing newer more CPU support) tryed both W7 versions , but there is a problem.
Using the DPC high latency tool i get like 100 us under any W7 version with this 790XT-G45.The same board is ok latency wise under XP ,it hovers around 10-20 us when you re not doing anything serious with it .I have to remind that on this board i ve also had some issues with the big mouse cursor thing that seems to be related to motherboard latencyes.
In the past i ve used the K9A2 Platinum with W7 64 RC with the same video card and sound card that i use now on the 790XT-G45 ,but the latency was always 10-20 us.In fact trying again the Platinum gives me under W7 like 10-20 us.
I ve tryed disableing onboards ,removing the Creative and updating to latest BIOS version but no joy.The latency also adds some drag to the system i mean W7 windows don t look to snappy like it feels on Platinum.
So is this board compatible to W7 for real ?
What is so different between the 2 boards ,does the 790X have bigger latencyes than the 790 FX from the Platinum.One of the issues is that even if i would choose the Platinum CPU upgrade path closes.
I repeat i ve tested both boards with default W7 drivers and with vendors drivers and same thing.
Any user with 790XT-G45 encountering this under W7 ?
At first glance it s not a very big issue ,but i m very sure this 100 us get s me while playing to more and i really hate input lag and static on my sound.
Any ideas ?

Hi Guys,
I agree with Sm3K3R that a 70+ microsecond increase in average DPC latency will have an undesirable affect on some apps (games, real-time streaming, etc.). I also believe that what is good for XP will almost certainly not be good for Windows 7. Too much of the architecture has changed. Better drivers may help going forward. To me, the bigger question is why this mobo takes so much longer to run these routines than the K9A2.
I do not have any serious problems with the apps I run. Some of them may run better with a shorter average DPC latency. I have no way to tell with what I currently have to work with. Other bottlenecks may be in play. I was just responding to Sm3K3R's request for feedback. My power option is set to high performance and my base configuration has 41 processes running, including Diskeeper real-time defragmenter, Avira Antivirus, Logitech SetPoint, Process Lasso's process governor, PeerBlocker, and TaskDock. It also includes the Microsoft search functions and the sidebar with 2 gadgets running. Most of these processes run as services. I thought it was the search, sidebar, or one or more of the non-Microsoft products causing my base 100+ average latency indicated by the DPC high latency tool, so I ran LatencyMon to find out.
I ran it several times for 2 to 5 minutes at a time, starting when the system was idle. The Nvidia display and NT Kernel & System drivers always topped the list, with latencies from 50 to 114 microseconds. The display driver's routine also ran much more often than any thing else, followed, about 60% less often, by the NT Kernel & System driver. Thus these 2 drivers contribute the most to my average DPC latency. The other products listed above most often had 0 or less than 15 microsecond DPC latencies. Once I saw this, I did not bother to check my game configuration which does not have the search, sidebar, and the non-Microsoft products listed above in it.
During a Google search of this issue, I read that someone reduced their average Windows 7 DPC latency by 50 microseconds by turning off the HPET timer. I tried this and it did not work for me.
Looking forward to the results of Sm3K3R's further testing and feedback from others.

MSI HD4830 OC - OC still doesn´t work

You should know about this problem, there is already one thread, but i want wo know why this sill doesn´t work.
9.2 with every program overclocking isn´t possible, so with 9.3 and 9.4, too.
I thought with 9.5 the problem will get fixed, but nothing happend with new catalyst 9.5 already on ati/amd server.
Thats really sad.

Greetings,
I have installed the Catalyst 9.5 driver suite and have a modified bios that sets my Clock speeds to what I wanted (625/1000) stable safe OC imo. Anyway I was stuck using Cat 8.12 Hotfix2 because of the overclock issue not working and after testing with 9.5 my custom clock speeds were indeed working and being reported as 625/1000 in catalyst and GPU-z. So I am unsure if the stock bios is working or not as mentioned I modified mine with RBE+Winflash. But it does work on my MSI R4830-TD1G-OC cards in crossfireX with both overclocking just fine. However when I run DirectX 10-10.1 games CCC crashes nearly every time and recovers but this causes some games to freak out going into window mode or when switching to desktop to show the error unable to switch back to the game in some cases. So I have rolled back to 8.12 hotfix2 until 9.6 gets released and hope that the problem is solved and overclocking still works.

List Of Values Switcher doesn't work fine here

Hello,
I tried a new List Of Values Switcher feature, in jdev11g R, and i tried andrejusb's example( http://andrejusb.blogspot.com/2008/10/multiple-lovs-per-attribute-in.html ), but it doesn't work
Is that a bug??
Thanks

I did find this in an email I sent out after I got this working:
"An important item to note is that when selecting a Default LOV, it appears as if the radio button does not determine which LOV is default. It is always the first item in the list (took me a bit to figure that little gem out)."

IPhone ring/silent switch doesn't work.

Weird problem. My colleague has an iPhone 3G which worked fine for over a year. But recently it developed a problem, its ring/silent switch doesn't really do anything. Earlier it showed an image on the screen notifying the change of mode. But now nothing happens.
The phone was not dropped and was not exposed to any shock as it is permanently kept on his desk, he never takes it anywhere (yes, even I find that weird ).
What could be the problem? He's very worried. Can someone help please?

hi there,
hope your problem is sorted but if not you could try the following tip i posted to a similar question:
for anyone who's iphone buttons (hardware) are not working, there is something you could try w/out taking your phone apart.
go to settings --> general--> accessibility-->turn on assistive touch
this results in a small on screen touch activated version of your home button popping up on your screen - press it to see options such as : home. if you press it then select device, you will see further options such as mute. hope this helps.. would love to know how you go...
good luck!

Command-Tab App Switcher doesn't work (related to corrupt .plist file error?)

Hi folks,
The other day, Drive Genius 4 reported on a file corruption: ~/Library/Preferences/System Mac.plist file. I tried to find the file but it didn't appear to exist.
Today, a strange phenomenon occurred which I think may be related. Strangest thing. I was using Safari, had several tabs open when, suddenly, I lost all input to any links in Safari and system wide as well, other than the cursor being able to move around the display. This dysfunction also included the Command-Tab App Switcher, though they keyboard text function still worked. I could enter text in fields.
I tried Force Quit Apps but I had to shutdown and reboot using the Power button. The reboot seemed to remedy the situation and most controls and keyboard functions returned except for the Command-Tab App Switcher.
In Safari, I used History/Restore Last Open Page, and when the searched for pages came up, they were blank - I was informed that there was no internet connection. Wi-Fi showed still on but grayed out, which could be logical. Also, this is when I noticed that the key repeat function wasn’t working. In System Prefs, I did manage to change the key repeat rate, which accelerates the backspace erase function but there is no key repeat, itself.
All of this, of course, might be pointing to that system file error. Whether it is that hidden Mac.plist file corruption I don’t know.
In any event, first thing I did was to run Permissions Repair. At one point, about 2/3rds of the way in, the progress bar hung for a few minutes and then finished the last third in a split second. In the Repair Permissions log there was no /Mac.plist file among those repaired.
Additionally in Sys Prefs, I tested for Tab key response by refocusing the radio buttons in the Full Keyboard Access option under Keyboard/Shortcuts panel from "Text boxes and lists only" to "All controls.” The refocus worked because now pressing Tab does move the cursor through every control. But still no Command-Tab App Switcher. In Spotlight, I did find the App Switcher.app but it would not open, because it is “Damaged or Missing.” App Switcher preferences are also not accessible.
In Terminal I changed directories and do see the /Mac.plist file under discussion. I suppose I could -rm the file but I’m reluctant without knowing more about what other anomalies might result. The App Switcher is one of the Mac’s best utilities (thanks to er, Microsoft.) If the /Mac.plist file will refresh from the current status, no problem, I would think.
Has anyone experienced anything like this? Any suggestions? Thanks a whole lot in advance for your time and consideration in this!
All best,
David

First, get rid of the worthless, time-wasting "Drive Genius" according to its developer's instructions. Never install any so-called "utility" again.
Don't waste time repairing permissions again, either, unless you have an indication of a permission error involving system files, which you don't and probably never will.
Never delete any file in the shell (Terminal) for any reason.
There is no built-in application called "App Switcher." There is no built-in file named "System Mac.plist" either.
If command-tab application switching still doesn't work after you get rid of "Drive Genius," see below.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

HDMI switch doesn't work with X1 box but fine with DVD player

I bought a HDMI switch and with both cable box and dvd plugged in, the Dvd player works fine but the X1 DVR box doesn't work at all, only a bright orange screen comes up, not even a messge that says no signal. Any suggestions?

greatbuys4less wrote:
I bought a HDMI switch and with both cable box and dvd plugged in, the Dvd player works fine but the X1 DVR box doesn't work at all, only a bright orange screen comes up, not even a messge that says no signal. Any suggestions?X1 is highly dependant on the HDMI signal .... what is the make/model of the HDMI switch you are using?

MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help

This topic has been moved to AMD64 nVidia Based board.
MSI K8N SLi Platinum Duall Channel not work? Please help

Quote from: iggsy on 29-July-05, 06:03:49
Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
Mine does the same thing at the startup screen but not on cpuz...go figure. Just my 2 cents.

Silent mode switcher doesn't work!

Hi, I have an iPhone 3Gs covered by warranty and I would like to know if Apple changes my iPhone if my Silent mode swithcer doesn't work?? (if my English isn't very good is because I'm Italian xD)

Most likely yes, as long as it's not due to user damage.

MOVED: MSI 790XT-G45 - OC Switch doesn't work

Similar Messages

Maybe you are looking for