MOVED: MSI GX 700 temperature problems

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=128650.0

You seem to have tried all possible options to cool the thing and I agree that the temp. is way above normal.
You are lucky the device did not break down at all. I can't imagine a laptop temp. going way up to boiling point.
I am thinking that the heat sink might not be placed properly.
If you do not know how to check that out, let an expert do.

Similar Messages

  • MOVED: MSI KT880 Delta-FSR - problem with multiplier

    This topic has been moved to Overclockers & Modding Corner.
    MSI KT880 Delta-FSR - problem with multiplier

    http://www.rme-audio.com/english/techinfo/nforce2_tweaks_02.htm
    wiretrick it so multipliers under 12.5 will work
    assuming the cpu is an old unlocked one

  • MOVED: MSI X58A-GD65 Overclock Problem

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=141883.0

    I bought the MSI X58A-GD65 because I am a complete moron who wanted a hardware Easy Switch.
    It works really well,but I was pissed when I noticed that my 12GB's of RAM was no longer recorgnized. Only showed 8GB's..............
    So I set the Easy Switch to deafualt ( 133 ) and decided to overclock the CPU and tweak the RAM.
    I just read every forum where people had problems w/ various settings, and since I only want 3.2GHz w/ 12GB's of RAM @1.4v it was a walk in the park.
    Clearing the CMOS after a day of torturing myelf and committing Human errors,I easily was able to simply undervolt the RAM from the 1.65v default,and raise the 133 default setting up by a factor of 5 and rebooting.
    So this is my first OVerclocking experience and MSI seems like a worthy board..
    I use this to perform hardware and virtual musical synths and instruments 6 nights a week.
    Since I cam from a solid 32bit DAW that ran 100% for 3 yerars,I didn't upgrade, but actually did an entire new rebuild since I wasn't sure ofthe stability in x64.
    But this DAW has worked for days on end now flawlessley.
    I Declare This Dog Will Hunt.............

  • MOVED: MSI-KM4M-V Boot Problems

    This topic has been moved to AMD SocketA based board.
    MSI-KM4M-V Boot Problems

    Fredrik:
    Thanks for backing me up while I was out of the forum.  
    Usually, when I clean my cpu, I use a Q-tip damped with Isopropyl alcohol and then remove the remaining grease on the processor die. For the heatsink, I use the same Q-tip or a piece of damped cotton with isopropyl alcohol also.
    I like the idea of the nailpolish remover since it makes sense because it can remove even the toughest resin.  
    See you later, and I hope our new friend has sorted the problem.  
    Edyros!  

  • MOVED: MSI Wind U135 screen problem

    This topic has been moved to MSI Notebooks & Netbooks.
    https://forum-en.msi.com/index.php?topic=160640.0

    Follow up: It turns out the cables for the keyboard and mouse came out. I put them back and it works fine now. The piece that fell out was not related to the problem. I think it was part of the back cover that came off.

  • MOVED: msi 790fx-gd70 sound problem with VISTA 64 Black

    this problem is a Vista-problem, since sound works in XP.
    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=130464.0

    Quote from: Bas on 14-July-09, 01:02:26
    Simple question, why don't you install Windows raid instead of AMD raid?
    The result will be the same but you will be controller independent.
    As you are doing mirror, software (Windows) raid can actually be faster.
    Also, why aren't you doing RAID5 with all those disks?
    It's faster and on top more secure.
    Thanks
    I thought it is supported on HW so I can implement that. I will try to that in Windows.

  • MOVED: MSI Z87-G45 USB problems

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=256118.0

    Quote from: Svet on 31-May-15, 18:05:32
    you say recently, does this mean it was working fine before?
    can you test this headset in another computer?
    Yes it was working just fine before, this issue started happening a couple of weeks ago but I've had this setup for almost a year now.
    I also don't readily have access to another computer to try it out on and testing it on another computer would be a bit of an issue because this only happens like once or twice a day after long hours of gaming.
    Quote from: darkhawk on 31-May-15, 18:36:48
    That's about the only relevant information I could find regarding this issue.
    I would try the headset out on another computer. This would allow you to verify if the headset is the problem, or if the motherboard/USB ports are the problem.
    I've checked out the link and my gamecoms were also configured for 5.1 surround sound, I reconfigured it to 7.1 surround sound so hopefully this is the solution. Also again I don't readily have access to another computer to test this out.
    Hopefully this fixes it, thank you both for the replies and I will update you if the problem goes away or if it still occurs.

  • MOVED: MSI P6N Diamond OC Problems

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=109999.0

    My temps are very good, actually, with a zalman 9700 led and arctic silver grease.  26 C idle and ~35 C at load with stock 2.4 ghz speed.
    I'm pretty sure the mobo is the source of the problem.  It doesn't seem like to like setting my corsair pc8500 at its rated 1066mhz either.

  • MOVED: MSI H57M-ED65 CPU Problems

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=143052.0

    Quote from: Henry on 13-November-10, 10:52:55
    Are you using the +/- keys on numpad  to change settings or the +/- next to the Backspace key  ?
     Edit: If you can't go down or up then I would guess you're using the wrong keys.
    thankyou!! That was the problem  now runnning 4ghz on stock volts

  • MOVED: MSI x99s Gaming 7 problem

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=184649.0

    There should be some guides in the manual...
    http://www.msi.com/support/mb/X99S-GAMING-7.html#down-manual

  • MOVED: MSI diamond plus FSB problem

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=94322.0

    You might get a better responce when you post in the correct area. The Via guys could not give a care about an NVidia board you know. LOL
    Besides we have an area of the forum for overclocking discussions. Not in the main tech areas.
    Topic moved.

  • MOVED: msi gtx 680 lightning problems

    This topic has been moved to BETA & MOD BIOS Section.
    https://forum-en.msi.com/index.php?topic=161594.0

    There was a purpose of putting a locked voltage, even now on lightning. I have the old bios on my lightning and works unlocked 300% and voltage too. But you risk a degradation in time if you run the card 24/7 in games with 1.2+ voltage just for some couple mhz more. If you are oc-ing the card just for gaming it's useless, 680 it's powerful by it's nature, and 100-200mhz more in gaming = 0 performance.
    And not all lightnings are like "in the msi picture advertising, that you buy a lightning for extreme OC" mine can't pass 1250Mhz on Heaven even on 1.25V on LN2 bios. So lightning in my opinion is still a luck, not a 100% card, chip and pcb that guarantees you a success overclock, compared with another product, or reference card.

  • MOVED: Msi killer network e2200 problems

    This topic has been moved to GAMING Notebooks.
    https://forum-en.msi.com/index.php?topic=252087.0

    RX8 you are really good guy to help us, thanks for clear explain!
    Quote from: RX-8 on 07-January-15, 11:37:20
    Hello Joebunke,
    I borrowed an GE60 2PE too and had a clean-installed Windows 8.1.
    Then I installed all Windows 8.1 drivers from MSI website (http://www.msi.com/support/nb/GE60-2PE-Apache-Pro.html#down-driver).
    My application page works normally when I opened up and there're already some processes shown in the window.
    Did you mean it's all empty?
    Did you try selecting "Show All Applications" or "Reset Application Data"?

  • MOVED: MSI mpower Max z87 problems

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=172963.0

    What is the S/N of the 760?
    We will need to update the Vbios for GOP support most likely.
    The most recent MPOWER bios I just posted here as well. >>BIOSes<<

  • MOVED: MSI G33M-FI 7357 Problems...

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=130434.0

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=130434.0

Maybe you are looking for

  • How do you install a backed up hard drive?

    Hi Guys, I recently had my hard drive expire on my G5 I have a back up of all data and applications that is on an external hard drive. How do I now install this back on to my G5 and its new hard drive? Is it as simple as drag and drop? Do I have to r

  • Photoshop cc not downloading.

    I downloaded the trial version of photoshop cc but it would not open on my imac (yet it showed in my application folder). Then I uninstalled the trial and  reinstalled it but the creative cloud installer kept sending me in a circle back to the downlo

  • Sales order from contract mandatory

    Hi all, I want to make it mandatory for some customers to create sales orders based on contracts, does anybody know how to do it?

  • I just upgraded to logic 9.2 and now my serial number isnt working.

    What can I do.

  • System load monitoring

    Hi, please advise. I have two business processes, one old process and another new - optimized process. Question is how to measure the system load (total) for realization of the first - old process and new process to measure difference of how the proc