MOVED: MSI K8N NEO4-F IDE Problems

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=97006.0

Quote from: kakarocht on 16-May-06, 18:30:45
how about if you changed others IDE's cable any different? Also gives more details on your PSU especially on +12V!
Changed all cabels,
haven't a clue about power supply heres a link to it
http://www.newegg.com/Product/Product.asp?Item=N82E16817148027
Could it be the crappy nforce 4 IDE drivers loads a people do be talkin about.

Similar Messages

MOVED: MSI K8N Neo 2 Platinum Problem

This topic has been moved to Overclockers & Modding Corner.
MSI K8N Neo 2 Platinum Problem

A lot of things could be wrong but it will be easier to figure out if we know what you did. When you say you changed settings in Bios, do you remember your last settings and what you did?
It might be helpful if you created a sig (as described in the forum rules) to show what you have in your system like my sig below. (Hint- use profile button in sign on screen.)
Things could be broken even if there is no visible evidence (such as flames or melted component) of course.
If I had to guess and your d-bracket reading is correct, corrupted bios requiring new bios chip, but let's not guess as a lot of things could be wrong and you don't want to invest in a new bios chip if the board cannot be brought back to life. Consider removing parts and testing them in an other machine. Start with CPU and memory?
Good luck.

MOVED: MSI K8N NEO4-F And PC4200 DDR2

This topic has been moved to AMD64 nVidia Based board.
MSI K8N NEO4-F And PC4200 DDR2

As far as I know, ddr2 will not be supported by AMD until next year - so we can all upgrade again! You have to go with ddr if you want them to work with mobos designed for AMD chips. Just my 2 cents.

MOVED: MSI K8N SLI PLATINUM OC problem

This topic has been moved to Overclockers and Modding Corner
MSI K8N SLI PLATINUM OC problem

Quote from: filleCarpet on 25-April-05, 09:36:05
Maybe i need to add more electric power for my memorys. The spec says 2.80 volt on 250 mhz but i start to suspect that this is just an minimum requirment, maybe i need more than 3.0 v to operate the memorys on high performance(beyond 230 fsb), but the thing is that BIOS allows me only too add 2.85v maximum.
Im trying to find a newer version of BIOS version 3.1 if there is any....
Here: http://www.techpowerup.com/articles/other/111
v5.0 Beta 4 allows to give 3.10V to the memory but i don´t think it´s going to help you, you probably have the CBBID issue.

MSI K8N SLI Platinum IDEs Problem

I have loads of problems with my optical drives.
1st started by the drive not being able to record, so i went to bios and on bios there wasn't even recognized, none secondary ides. rebooted, then no primary and secondary IDEs, after changing mems, and cables, the problem was the same.
this was fixed by making a bios reset. on the next day i was record a cd and got an error something about "fixing session", after this has happen the drive has simply died. it doesn't recognizes blank or recorded stuff, nothing, it's just blind.
the drive is a sony dru530a.
is this a motherboard issue? cause on the old board i never had problems with my drives.
Thanks for helping.

The drive has 1 year only and never gave any problems, just with this new board.
the strange thing, is that today it is reading again, what the hell is hapenning here?
How can i filter if this is a MB or drive problem?

MOVED: MSI K8N Diamond SLi boot problem

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=96886.0

Quote from: Sealance on 14-May-06, 22:30:32
We had a unit do the same thing that you are talking about here. I found after two days of test that it was the Heatsink. It had the grease but it was not seated just right. When I redid the Heat sink the issue went away. I had to clean them both and then surface the Heatsink with 600 grt paper.
When I put it back together it worked fine.
I can't say that this is it, what is wrong with yours but it does and is doing the same things that we had going on with us.
You might check this and see. Because it would not boot no matter what we did. And it will heat up and trip out in a second.
And this is after the machine had run playing games for a week or so. I thinkt he Heat sink warped from the heat. I have never seen one do this before but I guess it could happen. Any way it fixed ours.
Do You mean the CPU heatsink, or GPU heatsink? -
By the way, who wants to guess if I was blessed or not - and if buying a new $150+ PSU really helped
Please, any more help would be great

MOVED: MSI K8N NEO4-F

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=97738.0

Thanks Guys
EVGA 256-P2-N761-AR GeForce 8600GTS 256MB 128-bit GDDR3 PCI Express x16
DVD burner
80 HD
AMD Athlon 64 3200+ Venice 2.0GHz Socket 939
2 CORSAIR ValueSelect 512MB
XCLIO XClio 450BL ATX 450W Power Supply
Model
Brand   XCLIO
Model   XClio 450BL
Spec
Type   ATX
Maximum Power   450W
Fans   1 x 12cm ball bearing fan
PFC   No
Main Connector   20+4Pin
+12V Rails   Yes
PCI-E Connectors   1 x 6Pin
NVIDIA SLI Support   No
Modular Cabling Support   No
Power Good Signal   100-500ms
Hold-up Time   >20ms at full load, nominal line
Efficiency   >70% at full load, nominal line
Over Voltage Protection   +3.3V, +5V and +12V
Overload Protection   110-160%
Input Voltage   115/ 230 V
Input Frequency Range   50/60 Hz
Input Current   9A @ 115V, 5A @ 230V
Output   +3.3V@32A, +5V@30A, +12V1@15A, +12V2@17A, [email protected], +5VSB@2A
MTBF   >80,000 hrs at 80% load, 25 °C ambient
Approvals   UL, CUL, TUV, CB
Features
Connectors   1 x Main connector (20+4Pin)
1 x 12V (P4)
6 x peripheral
2 x SATA
2 x Floppy
1 x PCI-E
Thanks Guys
Gary

MSI K8N Neo4-F audio problem

I have problem with connecting dynamic microphone to integrated audio device on the motherboard.
When i connect microphone i hear very low voice in speakers, but all volume settings in mixer are on top level.
Maybe integrated audio device don't support dynamic mic or it's problem with current instanse of motheboard?
Help me plz

Hello !!
Try another Microphone or another audio input source to check if your problem is caused by your mic. You could use a walkman discman to check it, if you have the right connection cables.
Good Luck
Greetz MurdoK

MOVED: [Athlon64] AGP problem with my new MSI K8N NEO4-F

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] AGP problem with my new MSI K8N NEO4-F

Yes I managed exactly that. I've been out of the computer building business for a while so I didn't know the graphics ports had changed.
I will invest in a graphic card as well, thanks for putting me on track
(The manual sais something about the port supporting 8x agp though? )

MSI K8N Neo4-F Problems

I'm on my very first build and I'm running into problems. When I power up, all the fans spin up properly and the D-Link LED's go through the usual settings but it gets stuck on the combination that the manual translates into "Initializing Floppy Drive Controller - This will initializing Floppy Drive and controller." The D-Link LED's just hang there and I've left it alone for a couple minutes and it still wouldn't budge. On the screen, sometimes I can see the POST message and other times I see nothing at all on the screen from the various times I've restarted the computer. Any idea why it's hanging on this certain combination and not booting me to the BIOS setup screens? These are my system specs...thanks:
MSI K8N Neo4-F Socket 939 NVIDIA nForce4 ATX AMD Motherboard
AMD Athlon 64 3500+ Venice
ZALMAN CNPS7000B-AlCu Heatsink
Antec TRUEPOWERII TPII-380 ATX12V 380W Power Supply
OCZ Performance Series 1GB (2 x 512MB) 184-Pin DDR SDRAM DDR 400 (PC 3200)
Western Digital Caviar SE WD800JD 80GB 7200 RPM Serial ATA150 Hard Drive
Leadtek 6600GT

I take that into consideration! But as hardware goes, no two are exactly the same. But let's not focus on that, as I believe it could be problems elsewhere.
Posted by: Talannon
Hi!
First, the problem is I made this computer for a friend and when I boot the computer it always freeze at startup. I hear the normal bip when you start the computer then I see the first screen where it says to hit del to enter SETUP but it freeze there. I can't even go into BIOS. I have 2x512 MB in dual channel and when I remove one I can usually be able to go into the bios, then once there I check if everything is there by default ( I already reset cmos ) and it looks good then I reboot and it freeze again. I really don't know what to do...
But I will tell you the whole story. First I get the computer and at first boot I get no video signal. I see that I forgot to put the spacer between MoBo and the case. Then I fix that, comp boot I go into bios. I made another error by setting the FSB speed at 400 mhz because I read that it was going at 400 (I forgot that it was 200 x 2) so I reboot and I get nothing. I reset the cmos by pressing the button then i can get into bios.
From there I changed the boot order and I make it so MSI doesn't show his logo when you boot but you get the POST instead. I exit and save then I start getting that problem... Since then I am not able to go into BIOS unless I play with the memory module. Another thing is when I can't get into BIOS I watch the 4 LEDs on the USB thing you add to the MoBo (definition here http://www.msicomputer.com/support/sup_tshoot.asp#1_3 scroll down a bit). When I can't get into BIOS I get a combination (1 and 3 red) saying "testing base and Extended Memory, Testing base memory from 240k to 640K and extended memory above 1MB using various patterns" and when I changed the memory and I get into the bios (2 red) I get " Initializing Floppy Drive Controller, This will initialize Floppy Drive and controller". I got that from the book that came with the board.
The comp is:
MSI K8N Neo4-F
Athlon 64 3200+
MSI NX6600 TD 256 FX6600 PCI-E
Antec SLK1650 MINI TOWER CASE 350W
Kingston 1024 MB DDR400 Dual KVR
Maxtor 120Gb S-ATA
If anyone can help I would appreciate it! Thank you!
Posted by: Talannon
I will add that I tested the ram on another computer and it works fine. Also, when I only have 1 module of ram installed he start to detect the ide drive and sata HD but when It get to the floppy it fail. From there I can go in the bios but when I restart he won't even start detecting stuff he will only freeze after he wrote the memory testing line and then I can't do nothing... or I can hit continue and it even got started with the windows xp install but it crashed, it didn't take long. Reboot and crash at verifying DMI pool data or something like that after I hit continue again after detect floppy fail.
I tried resetting the cmos then reboot and it said that my config was in overcloaking mode and to reset it on the bios... But there was nothing to change. Also tried to continue there but it stop at Verifying DMI Pool Data.
The bios installed by default is v 1.3, which is the only version there's not on the msi website... strange
Anyway I pretty much said all I could, hope someone could help but I have a feeling that the MoBo as problem...
Posted by: keymaker
hmm......try takin out all of thec computer parts out of the computer case and this time only reseat the following devices: case, motherboard, cpu, ram, and videocard.
also try replacing the floppy cable and see if the computer will be able to detect the floppy this time. good luck
Posted by: Talannon
It still freeze the same way with only cpu ram and video card on mobo...
Posted by: zach1288
Try leaving your battery out longer, Some CMOS batteries can take up to 8 hours to clear.
Posted by: linderman
Welcome to TSF:
two items for consideration
A) what is your power supply and specs / this is by FAR the most underated overlooked component that plays such a vital role / the generics PSU just plain cant cut the mustard / they rely on cheap price to lure sales not performance / it doesnt take much of a fluctuation in power to send the newer systems baulking.
B) download and run memtest86.com on your memory modules / sounds like you may have a trouble maker there. Test them one at a time first / then as a pair
please post back with your findings
regards
joe
Posted by: Talannon
It could still play a role if I go back in bios and the settings seem to be back at normal? (like the FSB at 200 instead of 400 mhz like I tried to change at first.
edit: Power supply is a 350W smart Power by Antec
Posted by: Tumbleweed36
Hi,
An Antec is a great power supply, but frankly, don't think a 350 of anything is big enough to handle what you have. Even an Antec, you probably would need a minimum of a 450 to 480 with a very strong amperage rating. Antec and Enermax is where good power supplies are made if the wattage is what you need. That is the first place I would look after the memory thing is checked.
Posted by: Talannon
So... I made the test with the ram with this computer and the ram seems to have no problem at all.
So I guess I should try with a better power supply? But even a 350W with only the motherboard, cpu/fan, ram and video card would still not be enough to run it? Because I still have problem while running only that... Before I go out and buy a good power supply I would like to make sure it could be the source of the problem.
BTW, thank you all for the help so far, I hope we can find the problem :(
Posted by: Tumbleweed36
Hi,
If you have a Best Buy nearby, go find a good power supply and if it is not the problem, take it back or return it. That way, it would not be an expensive venture that might not solve the problem. Just be careful how you deal with the packaging so you can return it if it does not help. That sounds like the best solution at this time.
Posted by: Talannon
Ok, one other I will add is I noticed a trend. If I start the computer I can usually go all the way and start windows installation but it will stop working right after I hit enter to actually start windows installation. If I reset it will always hang at the beginning and unable to even get into the BIOS...
If I put the ram in dual channel setting it won't even start on first startup. But if it's on single channel it will at least let me go to the bios and such (but never recognized the floppy). Dual channel take more juice to run?
With this in mind is it possible that the mobo and/or cpu still be the cause of the problem?
Anyway I think I will try to get a power supply of at least 450W to test it. Just for testing purpose, can I get any power supply even if it's not antec or enermax as long as it has high voltage? I can test it and if it's working I can always return it and go buy a real power supply from antec or enermax where there is one.
Posted by: ginger6
I dont think it is your power supply, the power supply you have should handle what you have got no problem, the problem will be your memory...... are the 2 memory sticks you have identical, ie: same manufacturer, same speed, same chips on the board..... to run in dual channel mode you need both sticks to be exactly identical otherwise you will have problems.
What brand is the memory, if it is a cheap brand then you may have compatibilty problems.
Have you run memtest86 when both sticks are inserted but not in dual channel mode?
Kevin
live links of this type are no longer allowed outside of the advertising form
dai
Posted by: Tumbleweed36
Quote:
Originally Posted by Talannon
Ok, one other I will add is I noticed a trend. If I start the computer I can usually go all the way and start windows installation but it will stop working right after I hit enter to actually start windows installation. If I reset it will always hang at the beginning and unable to even get into the BIOS...
If I put the ram in dual channel setting it won't even start on first startup. But if it's on single channel it will at least let me go to the bios and such (but never recognized the floppy). Dual channel take more juice to run?
With this in mind is it possible that the mobo and/or cpu still be the cause of the problem?
Anyway I think I will try to get a power supply of at least 450W to test it. Just for testing purpose, can I get any power supply even if it's not antec or enermax as long as it has high voltage? I can test it and if it's working I can always return it and go buy a real power supply from antec or enermax where there is one.
Hi,
Before you go out and get another power supply, you need to make sure you have everything hooked up correctly.
Try flipping the floppy cable over and see if the BIOS recognizes it. That is a common mistake that all of us make from time to time. The red stripe (pin 1) goes toward the power plug on that one and it is opposite as a rule from the other ribbon cables, because the normal power plug on the hard drives have the power plug on the opposite side.
Second, tell us exactly what drives you have and how you have them hooked up...here is an example: Maxtor 30 gig IDE, set as master, on the end of the ribbon cable, and connected to IDE #1.
Third, the memory thing does seem to be an issue. Is the memory that you have listed on the QVL list in the motherboard manual?
For now, for testing purposes, just leave one stick of Ram in the board, and do follow the instructions in the manual about where that single stick should be. As an example, some boards require that when you use a single stick, that it is in Dimm2, Dimm3, or even Dimm4 instead of Dimm 1. That feature is new to some who don't regularly build, so please check that out before you go too far.
Let us know these things and we will try to get right back to you.
Posted by: Talannon
Quote:
Originally Posted by Tumbleweed36
Try flipping the floppy cable over and see if the BIOS recognizes it. That is a common mistake that all of us make from time to time. The red stripe (pin 1) goes toward the power plug on that one and it is opposite as a rule from the other ribbon cables, because the normal power plug on the hard drives have the power plug on the opposite side.
It will only go in the way I put it. Other thing is the power supply is an ATX with 20 pin. My manual says it should work but it also says that I could use a 24 pin SSI power supply but never use those. Again I am sure the power supply is in correctly cause I couldn't plug it any other way anyway.
Quote:
Originally Posted by Tumbleweed36
Second, tell us exactly what drives you have and how you have them hooked up...here is an example: Maxtor 30 gig IDE, set as master, on the end of the ribbon cable, and connected to IDE #1.
Maxtor 160 gig connected on sata 1 and there doesn't seem to ba master/slave option. Is it because it's SATA? It also seems to be detected as IDE THIRD Master on the first page.
LG DVD +/- RW in master on ide 1
Nothing on IDE 2
Quote:
Originally Posted by Tumbleweed36
Third, the memory thing does seem to be an issue. Is the memory that you have listed on the QVL list in the motherboard manual?
My ram is PC3200 (DDR 400) it's supported from what I can read in the book
Quote:
Originally Posted by Tumbleweed36
For now, for testing purposes, just leave one stick of Ram in the board, and do follow the instructions in the manual about where that single stick should be. As an example, some boards require that when you use a single stick, that it is in Dimm2, Dimm3, or even Dimm4 instead of Dimm 1. That feature is new to some who don't regularly build, so please check that out before you go too far.
Manual says it should be in a green slot first which is dimm 1 and 3. I put it in dimm 1 ans it should be fine. The setup like it is now, is in the combination list in the manual.
Posted by: Talannon
Quote:
Originally Posted by ginger6
I dont think it is your power supply, the power supply you have should handle what you have got no problem, the problem will be your memory...... are the 2 memory sticks you have identical, ie: same manufacturer, same speed, same chips on the board..... to run in dual channel mode you need both sticks to be exactly identical otherwise you will have problems.
What brand is the memory, if it is a cheap brand then you may have compatibilty problems.
Have you run memtest86 when both sticks are inserted but not in dual channel mode?
Kevin
I've only run test with the ram installed separately...
I also bought my ram as dual channel so I got a kit from Kingston KVR. So they should be identical to each other. Kingston is in the list of supported memory on MSI webpage of the motherboard...
Posted by: Talannon
So I tested the both ram at the same time but in single channel and no error.
One thing I notice is when I boot the ram is showed to go at 201 mhz instead of 200. Not sure if it says something...
Posted by: whodatknocking
Quote:
First I get the computer and at first boot I get no video signal. I see that I forgot to put the spacer between MoBo and the case.
this might be a real problem, we'll see
but first:
go into your bios and relaxe the timings on your ram, maybe 3-4-4-8
pump the voltage up on the ram a notch,to maybe 2.7 or 2.8
post back
Posted by: Talannon
humm I'm not sure what I should be looking for in the bios for that.
If I put Timing mode in manual instead of auto I can change a bunch of thing. I have no idea what you mean by 3-4-4-8... There is something in that called CAS# latency (Tcl) which is by default at 2.5 but could change it to 2.0 or 3.0. Is that the voltage?
Posted by: whodatknocking
try 3
no it isnt the voltage, the voltage would be in another spot in the bios
post back
Posted by: Talannon
changed nothing
I guess I am to a point to check the cpu on another socket 939 MoBo to see if it's the cpu or the MoBo the problem. With everything we tried I start to doubt it could be anything else.

Booting problem MSI k8n neo4

Hello. When I first made the computer I was a having a simular problem however now I can't fix it. When it gets to the DMI pool it doesn't read the HD instead it says boot from cd: NO DISK FOUND INSERT SYSTEM DISK. Originaly I would set the boot priority to my ide hard drive(which doesn't have an OS) and it would load the OS which is on my WD sata Hard Drive. I've tried everything I can think of. Help!!!!! Thanks
AMD Athlon 64 3200+
MSI k8n neo4
1 gig dual channel ram
Western digital 120g sata HD
Western Digital 8g IDE HD
Radeon 700 Video Card

bryant_4christ,
Take the comp to 1 HD and one Optical Drive, then run the install with the CD, when Windows first starts, hit the F6 when it tells you to and load the Drivers from the Floppy. The continue with the install, if you do not want to lose any data, make sure you tell it to use the current partition and to keep the files intact on the Format Screen, you do not want to format.
Also make sure you have the controller turned on in the BIOS for the SATA Drive and that it is in the Boot Order.
Take Care,
Richard

Problem witn MSI K8N Neo4 platinum

Hello!
Got a strange problem.
gonna give u my specs for the pc first:
AMD64 3000+
2*512mb PC3200 Kingston Hyper X
MSI K8N Neo4 platinum
His x800xl
Seagate 80gb,IDE 3,5 ( currently Linux is installed on it)
Here is the problem.
I've just put all the parts together. Turned on the PC, got into boot screen, pressed delete to enter bios, no problem here, change the first boot to: Cd rom. Beacuse I'm gonna install Xp on it. save and exit the bios, the post(?) screen shows up with sume info, and at the button i can choose: Press F1 to continue or press DEL to enter setup.
I press contunie and a blac screen show up and it said hit ctrl+s to enter raid meny, or something like that, press just enter, the a long list is been gone threw, ends up with : press any key to boot from cd,
i press a Key and the xp cd just start and gets to: controlling the hardware of the computer ( first thing the swedish install cd does). And after seeing that line and three dotes after it for about 5 seconds, it just dissapear and the screen remains black, the cd rom is loading, but no more...
anyone of u know what the problem is?
Best regards
// Swedo

Seems like i am having the same problem on My K8N Neo4 Platinum, actually i built 3 identical rigs. And i am having the same problem as above. What i did to get around the problem was connect My Sata II hard drives to the orange slots on the mobo, and run them as raid0 and everything works, i dont know why i can run it on the purple slots without raid.

New build: MSI K8N Neo4 Platinum + maxtor 300gb = problem?

Got these 2 products included in a order:
MSI K8N Neo4 Platinum nForce4 Ultra (Socket 939)
Maxtor DiamondMax Plus 10 NCQ 300GB
While checking up on the MB on the MSI site, I noticed a version of the bios (1.2) that says 'support for 300gb maxtor drives'
That's the same HD one I have coming with my order >.<
If the MB I get hasn't got that version of the bios already installed will I have trouble installing the drive?!
I downloaded the bios and it says in the readme not to install it from a floppy disk, so I guess you need a system up and running to make that update in the 1st place. No Idea how to go about this, if the need arises.

Quote from: Supershanks on 19-May-05, 21:45:00
Hi drjugears,
Welcome to the forum.
Many people are runnimg ok anyway as dope says.
But it's not an issue you can update the bios via floppy b4 connecting the maxtor.
See Flashing the BIOS for Users using NON FAT file system This is a guide written by msi. Strictly speaking if you folow the instructions you aren't flashing from a floppy the actual update is done on a virtual drive in memory.
if you need a floppy boot disc see Why no floppy for bios flash?
luck with build
Thanks very much for the welcome and info.
Unfortunately I'll have to wait a while to see...I installed everything....but need some adapter for the 6pin connecter on the ATI card. The power supply came with some 8 pin one. So I need a 4 to 6 pin adapter. Doubt If I'll find one local, so will probably have to wait until monday now to try it out.

Bluetooth problem with msi K8N Neo4-54G

I buy a msi K8N Neo4-54G and it was said on the box : "MSI Dual-Net Card (World First 802.11g+Bluetooth on single PCI Card)"
dont find any driver or something for bluetooth, but Wi-Fi work perfectly.
I hope someone know how to fix that problem.
thanks for your help

Quote from: crazy on 05-January-06, 16:07:28
You may firstly clear cmos and load defaults in the bios, and if it is available, please attach us a picture of the screen which the issue occurred when you hit enter during the its detecting the SATA hard disk. I am a little confused about what you said. Please tell me what changes have you made before the issue took place. I just want to help, so do many other people. But please firstly give us more detailed information.
I did it and nothing! Should I restore the original bios version that came with the mother?
I'll explain the problem: You enter BIOS, go to the disk properties (where says LBA, LARGE, CYLINDERS, HEAD, etc) and hit enter, usually the screen goes blue and shows a line at the bottom of the screen (they are like triangles pointing downside) and 2 seconds after everithing comes back showing the data of the disk ok? Well, now it hangs forever in the "triangles pointing downside" part and I have to restart the machine...
Does this belongs to the issue of the K8n neo4 platinum with the maxtor hdd's ??? The mobo is malfunctioning?
Please helpppp! Thanks!

NVIDIA Network Adapter problem (MSI K8N Neo4-F)

We have an MSI K8N Neo4- F motherboard. We are running Windowx XP SP2 (just upgraded to Service Pack 2). The computer will only boot in Normal mode if we disable or remove the NVIDIA Network Adapter driver. If we attempt to boot in Normal mode, it always ends with a Bad Pool Header problem (Blue Screen of Death). If we boot in Safe Mode with Networking, we can access the Internet. If we disable or remove the driver, then boot in normal mode, we can run in Normal mode but we do not have internet connection.
Does anyone know how we can use the onboard Network Adapter, and still boot in normal mode?
We have been using the latest drivers from MSI for this motherboard. Is there a different version that can be used? Is it possible that we have to update our BIOS for it to work correctly with SP2?
Thanks!

I think I may have misunderstood what you meant by a clean install. I probably should have asked what you meant before I answered my last post.
If you mean "did we just build the system by wiping the hard drive, installing XP SP1, then apply SP2", the answer is no. The system has been running Windows XP SP1 for several years without any problems, and we just wanted to upgrade to SP2 because there is some software that we want to load that requires SP2 to run. We have lots of software loaded on this machine that we use every day that we really want to avoid (short of time right now to tackle that project) rebuilding the entire operating system/machine because of the work involved in reloading all the software, etc.
Am I correct in assuming that we would have to wipe out the hard drive and start over if we did a re-install from a slipstreamed SP2 cd? If so, then we will probably just stay with SP1 for the time being if there is no other option to fix this Nvidia driver problem until we have more time to do a complete re-install and reload of the computer.
What about just installing a NIC in one of the PCI slots and use that instead of the onboard NetWork Adapter?
Thanks for all your help.

MOVED: MSI K8N NEO4-F IDE Problems

Similar Messages

Maybe you are looking for