MOVED: MSI k9n ultra-2f voltage problem

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=121178.0

Quote from: BOSSKILLER on 01-November-08, 04:22:10
Look for extra vcore option in Cell Menu.
oO ok i see it , thanks

Similar Messages

MOVED: MSI P35 NEO2 FIS voltage problems!!

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=120804.0

same problem with the Neo2 FR (like mine). After quite of bit of researching and testing i reckon that software can not correctly read the vRAM on these MSI boards. I found that Speedfan, Everest, and HardwareMonitor all gave an incorrect reading for my RAM's voltage. Also, if i increased the cpu voltage in the BIOS then the voltage monitoring programs would show an increase in CPU voltage and RAM voltage (even though i had not changed the latter).

MSI K9N ULTRA 2F max vdimm (max DDR2 voltage!)

1st: I would like to ask you, the maximum voltage for the vdimm, that MSI K9N ULTRA-2F provides.
2nd: Will it work with OCZ PC2-6400 EL DDR2 1GB (2X512MB) GOLD EDITION GX XTC ?
Greetings from Greece

Original 7250 supports 1.80 - 2.45v in 0.05v steps , latest bios is :7250v143
K9N ULTRA 2F is MS7250-040 and use another bios , latest : 7250v31
It supports DDR2-800 (PC2-6400) DDR2-667 & DDR2-533
The OCZ DDR2 PC2-6400 Gold GX XTC Rev 2 Dual Channel 2 GB nominal voltage is 1.95 volt
Latest bios for this board is
K9N Ultra (MS-7250) V3.1 BIOS Release
1. This is AMI BIOS release
2. This BIOS fixes the following problem of the previous version:
- Update AMD NPT version.
- Update SB module version.
- Support AMD AWAY mode.
Hard to say for sure if the VDIMM is the same (max 2.45v) since no manual is availible on any MSI location for
this K9N Ultra-2F version (only found it at Japan site ) . But it should be the same .

MSI K9N Ultra (MS-7250 v2) SATA II ports dosnt work

I have problem with 4 of 6 SATA II ports in the mainboard (MSI K9N Ultra (MS-7250 v2)(SATA II 1~6 supports RAID 0/ 1/ 0+1 or RAID 5 mode by NVIDIA® nForce 570) doesn't work after install wrong program please help
thanks

why no any body help this pictures from my bois sitting and my problem I need help please
MSI K9N Ultra (MS-7250 v2)
bois pictures
Here is functioning normally
Here is functioning not normally

MSI K9N ULTRA 2F & PALIT 8800GT SONIC ISSUE

i have msi k9n ultra 2f and ati x1950gt. i decided to buy palit 8800gt sonic. but no monitor signal when i put palit 8800 gt sonic. everything works but no screen. then i replace my old card, working pc at the beginning. it says like this : " your bios settings overlock stopped to work. system back to previous settings. " like this.
palit 8800gt sonic changes my mobo's bios settings? there is any solution? i updated mobo's bios but still same problem. pls help me.

Well do >>Clear CMOS Guide<< with power cord removed,
and leave just one memory stick in 1st DIMM close to CPU socket, then try to boot.

MOVED: MSI 745 ULTRA component

This topic has been moved to Retired motherboards.
https://forum-en.msi.com/index.php?topic=96810.0

Yes, but now the subject is a lot less descriptive.
With the original post, forum users could see what my problem is just by looking at the message list.
Now only those who open my message can see what problems I have. By this I lost a lot of potential helpers.
I personally would probably not open a message with such unspecific title as "MSI 745 Ultra problems"
I'll try to change the subject ...
regards,
stein

MSI FX950 Ultra AGP voltage setting please

Hi All
Anyone know what the AGP voltages should be set to in Bios for the MSI FX5950 Ultra.
Thanks

leave it be at auto 1.5 it sets itself to

MSI 645 ultra xp / 2000 problem please help.

I've got 3 MSI 645 ultra mobos. I've tried every thing i can think off to get xp installed and working. I don't get as far as formating the hard disk in the setup. I relpaced the power supply with a qtec 550 watt power supply (the gold one). i've flashed the bios to 1.9, i've used different hardisks and cables. I've checked the memory PC2100 and 2700. It's a pentium 4 1.5, I've tried a 2g in it as well. I'm using an ATI radeon 7500 but have tried a s3 agp card. All the other components work fine in another machine but not on my 3 MSI boards.
Please help some one out there must have had the same problem. I'll buy the first person who fixes it cakes!!!
Ta
Gus

Hi,
I ran memtest 3.0 and there were no errors. it ran for 9 hours.
I am only using one hard disk at a time. it's set as a master on IDE1 and the CDrom is on IDE2 as a master. should I use cable select?? I also tried the hard disk and CD on ide2 and that did not work either.
Ta

MOVED: MSI K8N Neo 2 Platinum Problem

This topic has been moved to Overclockers & Modding Corner.
MSI K8N Neo 2 Platinum Problem

A lot of things could be wrong but it will be easier to figure out if we know what you did. When you say you changed settings in Bios, do you remember your last settings and what you did?
It might be helpful if you created a sig (as described in the forum rules) to show what you have in your system like my sig below. (Hint- use profile button in sign on screen.)
Things could be broken even if there is no visible evidence (such as flames or melted component) of course.
If I had to guess and your d-bracket reading is correct, corrupted bios requiring new bios chip, but let's not guess as a lot of things could be wrong and you don't want to invest in a new bios chip if the board cannot be brought back to life. Consider removing parts and testing them in an other machine. Start with CPU and memory?
Good luck.

MSI P35 NEO2 FIR voltage problems!!

Let's start:
I have MSI P35 NEO2 FIR ,e5200,2 x Geil ultra plus 1066+,as us 2900CT,lcpower 6550g and...rest- not so important for my questions.
1.My problem is next: default voltage values for my RAM is ~2.2-2.4 every time I check in windows (speedfun,sisoft Sandra, everest..)shows me 2.0 or some time even 1.8v . When i change voltage in bios and went to win voltage on RAM is still unchanged (2.0v) .
Same thing happen with NB voltage. But CPU voltage I can change freely with no problem.
When I change fsb(try to overclock) suddenly memory voltage rises how i do not now , but only to 2.35 and no more.
Can anyone help me fix this problem because my memory is not stable at 2.0 or 1.8 sometimes and system crashes?
2.When i change cpu settings from 12.5*200 to (example)10*300 in windows even in system properties see that my current clock is 12.5*300=3750 and not 10*300=3000 like it should be .
Is it bios problem?
My bios version is 1.9.
Thanks!

same problem with the Neo2 FR (like mine). After quite of bit of researching and testing i reckon that software can not correctly read the vRAM on these MSI boards. I found that Speedfan, Everest, and HardwareMonitor all gave an incorrect reading for my RAM's voltage. Also, if i increased the cpu voltage in the BIOS then the voltage monitoring programs would show an increase in CPU voltage and RAM voltage (even though i had not changed the latter).

MOVED: MSI K9N v3 On AM3 processors

This topic has been moved to AMD64 nVidia boards.
https://forum-en.msi.com/index.php?topic=142380.0

According to various reports in this thread, it might be worth a shot. Be aware that AM3 CPUs are not officially supported. Nor are AM2+ chips, for that matter. I've decided to upgrade my X2 to an Athlon II X3 myself in the next couple of months. According to a recent report, things should be pretty fine, provided the Bios fits the bill. (Alternatively, you could pretend you were planning to upgrade to an AM2+ CPU and claim that this mobo was advertised as an AM2+ ready board for the bulk of its life-time, and kindly ask for a replacement. Who knows. Fact: the K9N Neo V2/V3 series was advertised just as that - and thus recommended by many in 2007 and 2008.

MOVED: MSI GTX 680 Lightning OC problem

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=164660.0

Quote from: zbychu222 on 15-January-13, 08:20:52
this card is made for overclocking please you think im not raise gpu voltage again please dont give me that stupid (no offence) answer
if someone buy 680 lighting i think he now what he bought sorry for english
Did your post mean for me? I was replying Zhoti's post and not yours .... Zhoti said he had unstable while adding +50mv and he didn't say about adding GPU volt so I assumed that he didn't add volt and I told him to add voltage no offence OK? Also sorry for my English language (I'm not quite good enough in English).
Froggy Gremlin was right, I think you're starting hijack this thread, you may make/start your own thread if you want to.

MSI 990FX GD80 CPU Voltage problem

Hello guys, I am new to overclocking and i think i have encountered a problem.
Whenever i try to increase my CPU voltage over 1.37 volts in B2 bios my PC freezes and cant boot up. The GPU fan ramps up for a moment and it sends a signal to the monitor but as soon as the monitor turns on there is no signal and it turns off. This keeps on going over and over until I clear CMOS.
PC Specs.
CPU: AMD Phenom II 945 95w x4 3.0ghz 945 (Deneb) (Waiting for FX8150..)
RAM: Corsair XMS DDRIII 1600Mhz downclocked to 800Mhz
MB: MSI 990FXA GD80 Military Class II AM3+
GPU: ATI Radeon HD 5870 Sapphire CF
GPU: ATI Radeon HD 5870 Asus CF
PSU: Corsair AX850w
Case: Corsair 650D
I don't know if its a problem with the motherboard or the CPU but the reason i post this in MSI forums is because once unboxing the motherboard I've noticed that there were some scratches on the CPU socket. I don't really remember what it was but i thought it nothing serious.
Sorry for my bad english...

KellirSpree
Welcome to club of owners 990FX-GD80, it is necessary to try new bios E7640AMS.B37 (v11.3B7).
http://forum-de.msi.com/index.php?page=Thread&postID=783122

MOVED: MSI Z77A - G45 - CPU multiplier problem

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=161026.0

Quote from: xmad on 19-August-12, 07:02:15
I was just saying that the beta caused a vga problem, latest release the f11 problem so try the release prior to that, but if you got it working don't touch it! lol
Are you still using the beta bios?
No clue, we are just users like you are, just keep checking the website. You should report the troubles you had with 2.4 to msi too.>>How to contact MSI.<<
Yeah iťs working now. As I said, I wanted flash older Bios 2.4, so for sure I click on restore defualts in bios (for sure before flashing) in that 2.64 Bios version...
PC restarts and my graphic card started working =)...
So now I am running on that the latest Bios as you refered mi (2.64 beta).
I am running some test of stability on @ 4 GHz with 1.070 V (IBT,Prime,memmaxx,linx,cinebench,occt,super pi, 3d mark) temps are 62 C max...
So I guess it's ok now =)
At the end I have one question :
My Cpu is now running on 40 x ratio all the time, there is no some underoverlocking ratio (16x etc.) when it's in idle. I was thinking the Ivy Bridge overclocking is overclocking of turbo only...
I know It's detail, because I have good temps even in idle with 40x ration (33-39 C) but i want to be assured if it is ok.
EDIT:
And btw I didnť have 2.4 bios flash on, I wanted put them on... But before flashing my 2.64 beta started working right with HD 7850 as is wrote upper.
I had Bios 2.5 before 2.64

MOVED: MSI Wind U115 screen resolution problems

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=131560.0

The speakers are built into the unit so I do not have a seperate speaker volume control. This is the Wind Top all in one unit.
The only way to control the volume is by using the external volume buttons. Some programs do not have a internal volume control so our clients are going to need to use those external buttons. This is a major setback considering we are a reseller and would be selling hundreds of units.
I don't think I have the SCM software installed.
Any other suggestions?
Why would MSI create a driver that when you adjust the volume it takes over the screen and causes programs to minimize? Seems a little crazy.

MOVED: MSI k9n ultra-2f voltage problem

Similar Messages

Maybe you are looking for