MOVED: MSI Z68A-GD65 (B3) and x64 2008 Server Sound Driver

This topic has been moved to Windows 64bit.
https://forum-en.msi.com/index.php?topic=153131.0

Well like I said from what I understand, the NDIS is a driver protocols part of windows and that device is causing the NDIS to affect the USB system.
There are quite a few references to this issue on technet and most end with replaced pcie wireless card and the issue went away.
You coud try a different driver probably best to contact both MSI & Qualcomm.
>>How to contact MSI.<<
Also, visit technet.com, this is a problem with many wireless card apparently. Some people that were able to get their wireless card working with default win 7 drivers had the problem go away.
www.technet.com

Similar Messages

MOVED: MSI Z68A-GD55 (G3) and Corsair 2133Mhz doesnt boot! Please make a BIOS update!

This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=156770.0

This is a user-to-user forum, not MSI Technical Support. We don't make BIOS Fixes here, sorry.
Quote
This mobo supports 2133Mhz
Not quite right. The memory controller is inside the processor, not the mainboard. According to Intel specifications, the native supported maximum is DDR3-1333. Everything above that has to be considered overclocking and therefore not necessarely stable.
I am moving this thread to the overclocking section of this forum for further discussion.
Quote
My new PC works in default state/1333Mhz but not in 2133Mhz. Any tips?
Go lower for testing: try DDR3-1600, DDR3-1866 etc, memory voltage 1.65V, command rate = 2T, play around with the other timings to find out what works and what not.
Quote
flashed to latest official BIOS 23.6
FYI: Latest official release is slightly newer: https://forum-en.msi.com/index.php?topic=151148.msg1151874#msg1151874

MOVED: MSI Z87 GD65 Gaming and msata speed issue...

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=253613.0

Quote from: JLio01 on 06-March-15, 14:21:58
How often can you notice the problem? You mentioned AS SSD Benchmark has speed loss, what's the result of speed test then?
I notice it a couple of times a day minimum

MSI Z68A-GD65 - receive msg BiosRomCheck - Driver cant load!

Just installed the MSI Z68A-GD65 MB,
and then installed all drivers off of the included cd.
Once Windows starts I receive a popup that says:
BiosRomCheck - Driver can't load!
I click 'ok' and all is well, but this can't be right.
Has anyone seen this before?
Everything else is fine with the MB.
thanks

It's something from MSI's driver CD/DVD that you have installed.
Run autoruns: http://technet.microsoft.com/en-us/sysinternals/bb963902
and deselect it from the startup entries to get rid of it

MSI Z68A-GD65 (G3) Boot Loop

Hello all,
I purchased a MSI Z68A-GD65 (G3) and when I started up it goes into a boot loop. I can't see anything on the screen.
Setup
- Motherboard MSI Z68A-GD65 (G3)
- Intel Core i3 Ivy Bridge 3220 3.30GHz 3MB Cache LGA 1155 55W Dual-Core Processor
- Kingston ValueRAM RAM Module - (2 x 8 GB) - DDR3 SDRAM - 1600 MHz DDR3-1600/PC3-12800 - Non-ECC - Unbuffered - CL11 - 240-pin DIMM
- COOLER MASTER Elite Power 400W OEM 20+4 pin & 4+4 pin ATX 12V V2.31 12cm fan Eco-friendly Reliability Quiet Noise Filter 70% efficiency
BIOS stated in the green labels below the "MSI" Heatsink is: E7681 IMSN10.
I tried another PSU and had the same issue.
Anybody can help me? Thank you very much for your time!

Your mainboard does not support an Ivy Bridge processor with the current bios that's why it doesn't come up. It needs a P series bios (7681vP1 and above).
There is no other way than to use any Sandy Bridge cpu to flash bios to the latest to make your cpu work: http://www.msi.com/product/mb/Z68A-GD65--G3-.html#/?div=BIOS
For flashing >>Use the MSI HQ Forum USB flasher<<
If you can't get a hand at a Sandy you need to let any PC shop or MSI do it for you (that's not for free of course). >>How to contact MSI.<<

MSI Z68A-GD65 (G3) videocard running @ 8x instead of 16x

MSI Z68A-GD65 (G3) bios v23.4b4
Videocard MSI GTX 580 Lightning Xtreme Edition 3072MB 290.36 beta drivers tryed other ones as well still the same.
Asus Xonar Essence STX Sound Card this is pcie and is in the other blue videocard slot could this be the reason why my card is not running at 16x

Ok what ive done now is fit my videocard in the second blue 16x slot and put my soundcard in the pcie 3 and it still says its running at 8x will remove the soundcard and report back.
Edit:videocard is back in pcie2 running 16x but now i cant fit the soundcard in pcie1 cpu heatsink gets in the way,pcie3 is covered by the videocard as it takes up 2 slots amd pci34 the videocards fans come into contact when the soundcard is installed there.
After spending £140 on a pcie soundcard i would need to get a pci one and thats not going to happen so ill have to run @8x
Panic over all running ok now installed the soundcard in pcie3 and moved the bracket over just enough to miss the fans on the videocard.

MSI Z68A-GD55 (G3) and Corsair 2133Mhz doesnt boot! Please make a BIOS update!

Just bought a new MSI Z68A-GD55 (G3) and flashed to latest official BIOS 23.6. This mobo supports 2133Mhz but my new Corsair 2133Mhz doesnt work no mater what i set it up in bios except 1333Mhz??
MSI please make a BIOS update for Corsair memory CMZ16GX3M4X2133C11R
My new PC works in default state/1333Mhz but not in 2133Mhz. Any tips?
I live in Sweden and bought this quad memory: http://www.webhallen.com/hardvara/147837-corsair_xms3_vengeance_quad_16gb_ddr3_pc3-17066_2133mhz

This is a user-to-user forum, not MSI Technical Support. We don't make BIOS Fixes here, sorry.
Quote
This mobo supports 2133Mhz
Not quite right. The memory controller is inside the processor, not the mainboard. According to Intel specifications, the native supported maximum is DDR3-1333. Everything above that has to be considered overclocking and therefore not necessarely stable.
I am moving this thread to the overclocking section of this forum for further discussion.
Quote
My new PC works in default state/1333Mhz but not in 2133Mhz. Any tips?
Go lower for testing: try DDR3-1600, DDR3-1866 etc, memory voltage 1.65V, command rate = 2T, play around with the other timings to find out what works and what not.
Quote
flashed to latest official BIOS 23.6
FYI: Latest official release is slightly newer: https://forum-en.msi.com/index.php?topic=151148.msg1151874#msg1151874

MSI Z68A-GD65 G3 - Performance Issue

Hi Sir
Good Day!
I had bought this new system for a week ago as follows :-
MSI Z68A-GD65 G3
Intel Core I7 2600k
TeamElite DDR3 2133 PC3-10700 8GB 2x4GB
MSI GeForce GTX 550 TI
WD WDCWD10ealx 7200 1TB SATA6
Win 7 64 ULTIMATE
Asus DVD writer
Cool Master CM690 Advance II
Enermax 500W
Logitech K520.00
It having some performance issue after i updated the bios to new version n.30, before this was original version 23.0 come with motherboard.
I updated the bios using msi live update on yesterday.
What i noticed after updating to new bios, i can feel the performance had drop, when lauching a program, and sometime when typing webpages address or in the google typing word, what happen was the word seem to appearing slow to display. Not sure what happen.
I hope you guys can help me out, and please advise me what to do.
Looking forward to hear from you soon.
Raja

If the system was working, why did you update the BIOS ?
If the previous BIOS worked for you, then flash back to that BIOS. Use the forum flasher >>Use the MSI HQ Forum USB flasher<<
Once you have flashed the BIOS do a CMOS clear. >>Clear CMOS Guide<<

MSI Z68a GD65 G3 Buzzing noise of hard drive over speakers

I finished building system
MSI Z68a GD65 G3
Fractal design define r3 case
Core i7 2600k
2x MSI N460GTX 1Gd5 OC
16 gb DDR3 Ram
Corsair HX 850w PSU
CORSAIR GT3 90 gb ssd
Logitech Z5300 speaker set 5.1
+bunch of samsung 1 tb spinpoints
I noticed when i scrolled with my mouse wheel up or down, i hear a interfering noise low buzzing noise over the speakers 5.1 which are conected to on board sound card.
When i connect my headphone the sound still exists
It also occurs when i start up some applications and the hard drive is busy.
I tried enable/disable eup2013 and c1 and intel c1 etc... nothing works
With or without overclock it doesn matter.
Does anybody have a suggestion how to fix this problem? Thank you! Please help;-)

Sounds like a bad earth somewhere.
Is that a wired mouse ? Have you tried another mouse and keyboard ?
Can you test the board outside the case, on a non-conducting surface. No device used for the test to be mounted in the case.

MSI Z68A-GD65 G3 - Over Clock

Hi,
My System spec as below :-
MSI Z68A-GD65 G3
Intel Core I7 2600k
TeamElite DDR3 2133 PC3-10700 8GB 2x4GB
MSI GeForce GTX 550 TI
WD WDCWD10ealx 7200 1TB SATA6
Win 7 64 ULTIMATE
Asus DVD writer
Cool Master CM690 Advance II
Enermax 500W
Logitech K520.00
And meanwhile i want to OC i7-2600K - using OC Genie default setting at bios to 4.2ghz
Since i'am using the cooling fan provided by intel original, would you advisable to overclok or must get better cooling fan or not?
I'am mainly using for video conversion/editing purpose. Gaming not much.....
Looking forward to hear from you soon
Raja

Quote
i'am using the cooling fan provided by intel original
Quote
around 77 to 79 celcius.
That is what you need to expect with a stock cooling. Around 80°C are not in the real critical temperature range (red range: probably 85-95°C). The CPU has its own thermal management and will shut down itself automatically as soon as it reaches its thermal shutdown point (95-105°C). As soon as the core temperatures get close to the shutdown point, the CPU will automatically clock itself down and lower the Core Voltage. In case that is not enough to cool itself down, it will shut off.
So basically, you will know when the temperatures get critical as soon as the CPU decides to clock itself down under full load.
However, allowing to run the CPU @80°C on a regular basis, is probably not something you want to do. Please consider a cooling solution more appropiate to your overclocking ambitions.

MSI Z68A-GD65 won't start to bios!

gratz from Finland guys.
I have problem, heres my pack:
MSI z68a-gd65
i5 3450
hyperx predator 8gb 2x4gb rams
asus gtx660 pci-e 2gb
2tb seagate
650w corsair
and the problem, i installed up the components today and got it working first without detecting SATA 2tb seagate. Then i switched to all sata ports and the last one 8 and 7 worked fine for seagate and Asus DVD. But now the problem is that it lets me in marvell bios when it shows up the harddisk and dvd, but not in the "primary bios". When it shows the first data, harddisk and dvd, it goes straight to "Warning BIOS ME file not found install on the usb" etc... I dont know what to do because i read all the forums in the internet, wasted 6 hours in investigating internet and found nothing. Have tried the flash utilitys, USB flasher utility found in forums and all... Reseting BIOS didnt help.
Please help, im getting drunk every hour more with this cra*

Sdrastvui Svet, jeshli s toboj realno 4eres skaip pogovorit, skin poshalushta svoj nick tam.
As i know, the board was in the warranty fix, and became back to shop, where i buyed it. But the shop gave everyone who would buy the board, 6months warranty so i dont think it would be broken.
Also for the flashing, i dont have OS on that system, what we are talking about. And if i download those BIOS from the MSI site, its only EXE? I cant run exe from USB flash when starting PC?

MOVED: Z68A-GD65 (B3) and Asus r9 280x

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=174418.0

Quote from: say0n on 07-November-13, 04:19:18
I just got an ASUS R9280X-DC2T-3GD5 but i doesn't give me any signal in my monitor. Im using the DVI port and the Motherboard is Z68A-GD65 (B3)
Im running an old HD6870 with no issues but in the moment o switch the cards it doesn't give me any image and there's no POST.
i5 2500k at 4.3ghz
Z68A-GD65 (B3)
The card was already tested with the seller and it works fine so is not the card... please help i don't want to spend more money to change my platform to 1150 socket.
I bet the seller didn't test the card in a PCI-E 2.0 "environment".
Z68, i5-2500K are PCI-E 2.0 (HD6870 is PCI-E 2.1)
AMD Radeon R9 280X is PCI-E 3.0
Many AMD PCI-E 3.0 graphic cards have backward compatibility issues.
That's why I always recommend Nvidia cards for older motherboards and processors.
If your motherboard BIOS is up to date, the next thing to try is to update the VBIOS
(ask the seller if you cannot do it by yourself).
If that doesn't fix the problem, you have 2 options:
- replace the card with a Nvidia one
- keep the card, but replace the processor with a Gen3 one (3770K, 3570K, etc)

MOVED: MSI X58A-GD65 BIOS Cell Menu Bugs!

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=143541.0

Quote from: HU16E on 05-December-10, 03:11:14
Recommend opening a ticket with MSI Tech Support & describing in detail the problems you are having with the new bios. Since this is a user to user forum, nothing concerning a bios revision or the like is going to get fixed here. About the only advice anyone here could give would be maybe some new setting in the bios has been added, or a setting has been overlooked preventing the desired results.
After taking a peek in the manual, nothing is shown about the board having these setting options. It's possible the new bios has incorporated it. It would show up in bios Cell Menu & the description of what it is & what it does would be in the info box to the right. When OC'ing, make sure to disable Spread Spectrum. After the bios update, did you remove the power cord from the PSU & clear CMOS?
I have disabled the "Spread Spectrum" because it caused slow perfomance especially in SSD.
About the power cord and clear cmos. No, never, ever.
Full System Specs:
Tower: CoolerMaster Cosmos RC-1000
PSU: CoolerMaster Real Power M850
CPU: Intel Core i7 920
CPU Cooler: CoolerMaster V8
Motherboard: MSI X58A-GD65
RAM: OCZ DDR3 PC3-12800 Intel® i7 Triple Channel [3x2GB, 1600 MHZ, 8-8-8-24]
SSD: A-Data X25 80GB by Intel (Model: SSDSA2MH080G1GN) [Sata 2]
VGA: Sapphire Radeon HD4870 1GB
HDD1: Western Digital Caviar Black 1TB (WD1001FALS) [Sata 2]
HDD2: Western Digital 250GB [Sata 1]
HDD3: Western Digital Caviar Black 640GB (WD6402AAEX) [Sata 3]
Optical 1: Samsung 223QRSMN DVD-RW [Sata ?]
OS: Windows 7 x64 Ultimate
I don't see the point of posting system specs because I'm sure it's a bug, the bios refuses to save the Cell Menu options but whatever. I can't argue with that because this information is crucial to most issues

MOVED: MSI X58A-GD65 Overclock Problem

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=141883.0

I bought the MSI X58A-GD65 because I am a complete moron who wanted a hardware Easy Switch.
It works really well,but I was pissed when I noticed that my 12GB's of RAM was no longer recorgnized. Only showed 8GB's..............
So I set the Easy Switch to deafualt ( 133 ) and decided to overclock the CPU and tweak the RAM.
I just read every forum where people had problems w/ various settings, and since I only want 3.2GHz w/ 12GB's of RAM @1.4v it was a walk in the park.
Clearing the CMOS after a day of torturing myelf and committing Human errors,I easily was able to simply undervolt the RAM from the 1.65v default,and raise the 133 default setting up by a factor of 5 and rebooting.
So this is my first OVerclocking experience and MSI seems like a worthy board..
I use this to perform hardware and virtual musical synths and instruments 6 nights a week.
Since I cam from a solid 32bit DAW that ran 100% for 3 yerars,I didn't upgrade, but actually did an entire new rebuild since I wasn't sure ofthe stability in x64.
But this DAW has worked for days on end now flawlessley.
I Declare This Dog Will Hunt.............

MSI Z68A-GD65 (B3) Continuous Boot Cycle

My Mainboard was running flawlessly, but yesterday when power on the system...I found that Continues boot cycle.
The computer turns on for a few seconds then powers off. This cycle repeats every 5-10 seconds.
Z68A-GD65 (B3)
http://www.msi.com/product/mb/Z68A-GD65--B3-.html
What are possible fixes/problems or I have to RMA it...please help
I have tried clearing CMOS, swapped the psu, cpu, rams...and also tried with one ram stick at first slot near cpu and at at all other memory slots...but no success and same repeated automatic boot cycle every 5-10 seconds or so...
my specs are..
2600k
Kingston 2x2 gb ram 1333mhz 1.5V...value ram
Nvidia GTX280 GPU
Delta branded 750watts psu

Quote
when i reset the cmos..on first second and third boot the BIOS led flashes..but on fourth it remain stable in that brief time it is powered.
Could you clarify this a little? You mean the BIOS LED stays full off, or it is on steady?

MOVED: MSI Z68A-GD65 (B3) and x64 2008 Server Sound Driver

Similar Messages

Maybe you are looking for