Moved my itunes folder to new drive, now can't see my music in itune

I transferred my itunes over to an external drive per the step-by-step instructions on the Apple site, which assures that all playlists will be maintained. iTunes Properties shows the correct location of the new folder, which, judging by its size, does in fact contain everthing I transferred over to it.
Now when I open itunes, it is blank - no music, movies or playlists. How do I get itunes to pull up everything propoerly from the new folder location?

*Well this worked, thank you. However, my playlists arent there. Did yours go back in?*
I never moved my library file just the music folder but I'm surprised the playlists aren't there if you are picking up the original library.
*I believe I can now synch the ipods to get those playlists, but there were others..*
If you sync the iPod to a library without playlists the lists on the iPod will be erased. There are a number of third party utilities that you can use to retrieve music files and clone playlists from your iPod. I believe these three will recover playlist data, they'll give you somewhere to begin your research:
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
You can find others to look at here: Comparison of iPod managers

Similar Messages

Moved ITunes folder to external drive now can't get Ipod to sync

I have moved my ITunes folder from laptop to external drive. Had to move each album folder individually to ITunes and when I went to Sync my Ipod, says its in Restore mode and can't get out of it as it stays in Restore mode over and over and over.

As a best practice, you should move your content to an external drive and import references to into iTunes rather than moving the whole database and app files. In iTunes > Preferences > Advanced, uncheck "Copy files to iTunes Media folder when adding to library". This will keep all your music and movies on the external drive, but iTunes and all references to the content on your desktop.
I know that's not what you wanted to hear as a fix, but this is how I have my MacBook Air setup and it works fine with the iPad. My son tried to move the whole app and database to a hard drive and we had endless problems with it.

Installed Leopard on new drive, now can't uninstall CS3

I deactivated CS3. Then I installed Leopard on a new drive and it moved over all my stuff from Tiger, including CS3. Of course, due to the idiotic policy that allows you to run 2 copies, but not on the same computer, it won't start. Then when I went to uninstall CS3 using the proper uninstall in Utilities, I got a message that says "System Requirements Error - This software cannot be installed because the file system of the OS volume is not supported". What the heck is that? I have NO way to uninstall CS3? Why the restriction on two copies on one computer anyway? What if your current drive fails unexpectedly? How do you deal with that?

I have a perfect copy of the boot drive elsewhere on my system. I can boot from it in an emergency. But Adobe tells me that the copy of PS CS3 on that drive is not supposed to work. I called because I had the problem where it dies instantly as soon as you start it. I know the copy was good because I just tested that yesterday, again, during my song and dance to get PS on a non case sensitive drive. PS came up and ran from the spare drive I used as an intermediate Leopard > spare > Leopard. I didn't activate it there but did as soon as I was back on the modified Leopard drive and it's fine. I would say from my previous experience that if I were to boot back to spare and try to start PS, it would now die instantly because it's the second copy and hasn't been activated FROM THAT DRIVE. If I try to activate it I'll get some garbage about too many copies - I don't recall what they said exactly. The gist of it was 2 copies, 2 computers - fine. 2 copies one computer - not OK.
You say you had 2 copies activated on one computer? How? In my experience, the second copy dies so fast you couldn't get to activation. I'm not doubting you, I'm genuinely curious how it can work. I'm on a Mac Pro, if that's of any import.

HDD crash requiring complete reload on new drive, now can't install ID CS5.5 (can't activate)

I've been using a Vista system for the past couple years and had ID CS5.5 installed. A few days ago, my HDD crashed and will not boot. It's gone. So I've installed a new drive, installed Windows 7, and am in the process of reloading my programs. I've had no problem until attempting to load ID CS5.5, which is a full retail version I purchased directly from Adobe by phone about a year ago. It accepts the serial number, but when I select "Next", I get another prompt saying although the serial number is valid, it needs a serial number from a previous version....which I don't have since I didn't have a pervious version....and my copy of CS5.5 is NOT an upgrade version.
I contacted Adobe customer service and got someone in India who obviously didn't understand the issue, and continually pushed to purchase the most recent version....which I DO NOT want to do. All I want to do is use the same CS5.5 I've been using. I ended up having to terminate the conversation.
I then contacted the person who builds my systems, and he said he'd had the same problem several times with Adobe activation involving customer computer crashes. He went on to tell me that I first have to de-activate from the old system, then re-activate on the replacement system. But in my case, the HDD is fried and I'm not able to de-activate my ID CS5.5.
So I'm in a catch-22. I have a perfectly good CS5.5 that I've paid for and now can't use. I feel like I'm being punished because my computer crashed...which wasn't my fault, and it's not like I'm trying to load CS5.5 on a second system. It's simply a replacement system due to the crash.
What can I do?
Thanks
Denny

Thanks Dov. I hadn't accessed my Adobe account for quite a while, so just did and was reminded that my CS5.5 is in fact an upgrade to CS2 that I'd purchased a long time ago and forgot about it. My fault. I loaded CS5.5 as a trial, so was able to enter the serial number for CS2 as the previous version, and it activated.
But I agree, the person I spoke to should not treat any customer in that manner. Must be working on commission sales...and they were going to charge me for their "Expert help and advice".

Moving catalog and photos with external drive, Elements can't see catalog database

Tried searching, but couldn't find my situation.
I have an old computer with a second hard drive (1.5 TB). I pulled it from my old computer and put it in the new computer.
I also copied my "My Catalog" folder which contains the catalog database file (catalog with a type "PSE8DB").
Got the second drive installed fine in my new computer.
Reinstalled Elements 8.
But the File / Catalog dialog box can't seen the existing catalog database. I can browse to the folder, but it doesn't show up.
Old computer was Windows XP. New computer is Windows 7.
Both are using Photoshop Elements 8.
Any help would be greatly appreciated.
John

solodarwest wrote:
Tried searching, but couldn't find my situation.
I have an old computer with a second hard drive (1.5 TB). I pulled it from my old computer and put it in the new computer.
I also copied my "My Catalog" folder which contains the catalog database file (catalog with a type "PSE8DB").
Got the second drive installed fine in my new computer.
Reinstalled Elements 8.
But the File / Catalog dialog box can't seen the existing catalog database. I can browse to the folder, but it doesn't show up.
Old computer was Windows XP. New computer is Windows 7.
Both are using Photoshop Elements 8.
Any help would be greatly appreciated.
John
John,
1 - Where are your photo files located ? What is the drive letter assignment of this second drive ?
My suspicion is that the photos (and perhaps also video files) reside on that second hard drive which you physically moved and installed in the new computer.
2 - Where is the PSE Catalog file (both on the old XP system and on the new W 7 system) ? Is that folder containing the PSE Catalog on the C drive or on that second hard drive which is now installed on the new W 7 system ?
3 - FYI - I agree with the DJ Paige recommendation to "In Windows, double-click on the *.pse8db file" as a means of starting the Organizer with the Catalog that you previously had under XP . This generally works on most versions of PSE although I did have an experience with PSE 8 where it did not work initially.
4 - FYI - If your photo files were stored under My Pictures under XP, then I think that the other suggestions about PSE not being able to find photosand needing to do a PSE Backup are relevant -
"You catalog will be holding the absolute location of the files in the catalog. These will no longer be valid when porting to Win7 from XP"
However, if your photo files are stored on that second hard drive, I am skeptical about that conclusion.
5 - FYI - I have seen a report of successfully moving a physical second internal drive from old XP PC to new Windows 7 PC with PSE 10. I think that you should be able to do the same with PSE 8.

Moved new primary now can't see each other's imaging folders

We have two primary zcm servers.
I've moved one the primary holding the embedded db a new primary server. Same name same IP etc. It seems to work ok.
But, if I am on zcc on server 1 and try and browse to an image server 2 (and vice versa) I get:
com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: java.lang.RuntimeException: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found
I did find this https://www.novell.com/support/kb/doc.php?id=7002816 but it didn't help.
I've also tried zac retr but that hasn't helped.
Ideas?
Thanks

Did you try to do the `zac cert-info` command on both servers to see if they matches?
Compare the thumbprint of the ones that finish with "O=Internal Certificate Authority" too.
Regards,
Guillaume
Originally Posted by Thomas Roberts
We have two primary zcm servers.
I've moved one the primary holding the embedded db a new primary server. Same name same IP etc. It seems to work ok.
But, if I am on zcc on server 1 and try and browse to an image server 2 (and vice versa) I get:
com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: java.lang.RuntimeException: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found
I did find this https://www.novell.com/support/kb/doc.php?id=7002816 but it didn't help.
I've also tried zac retr but that hasn't helped.
Ideas?
Thanks

Mac with new drive/system can't see Time Machine backup.

The drive on my wife's MacBook Air went bad and we got it replaced at the Apple Store. She started the Air, went to restore her files from her Time Machine/Time Capsule backup and her backup was not listed.
Then we tried again and the migration assistant says 'connection failed.'
I checked the volume from my Mac and the 'sparsebundle' is on the Time Capsule.
Any ideas?

This is a guess, but I'd try mounting that "sparsebundle" before you launch Migration Assistant.
If that doesn't help, check item #19 of Time Machine FAQ.

I backed up my itunes folder to an external drive, then deleted it from the hard drive, then restored to the hard drive, but now can't see the files, playlists

I backed up my itunes folder to an external drive, then deleted it from the hard drive, then restored to the hard drive, but now can't see the files, playlists

Was the entire folder copied including the iTunesLibrary.itl file?

My computer broke down and now i bought a new Mac, how can i get my music back from iTunes??

my computer broke down and now i bought a new Mac, how can i get my music back from iTunes??

Unless you subscribe to iTunes Match , Apple does not keep a backup of your iTunes library. Even then it is not the library as it exists on your computer, but some version of the media, and only media files, not playlists. Even then not all media are definitely available since anything removed from the iTunes Store since you purchased it is not available for re-download.
FAQ: Why iTunes Match Can Not Be Used as a Backup - https://discussions.apple.com/docs/DOC-4112
Using Match as a backup for iTunes - https://discussions.apple.com/message/17039436#17039436
In your case it sounds like you will have to obtain non iTunes purchases from their original source or a backup you may have made at some time in the past.

I have move all Pic to new drive, lightroom can't find PSD pictures?

I have moved all pictures and LRCAT to new drive, Lightroom can't find any PSD pictures? Is this a problem with Lightroom?

1. I exported all pictures using export as a catalog to a new external hard drive. I’m using lightroom 5. The file was large. I have about 3000 missing pictures after to import to new drive. sing find, I try to find the pictures. I discovered that lightroom could not find any pictures with .PSD extension. I would go to the prior drive and do a search using window explorer, I would find the picture with the PSD extension and go back to “find” again, I would get to the correct folder and Lightroom would say there were no pictures in the folder. I’m using the “!” on the corner of the missing picture to start the “ find” and I work backwards until I find the correct folder that I identified using windows exployer. Normally this process works great. Suggestions?

Ive just bought a new pc, how can i transfer my music off my ipod into my itunes?

ive just bought a new pc, how can i transfer my music off my ipod into my itunes?

MrMartinOx wrote:
Ive recently bought a new pc ... how do I transfer my whole library from my old (windows 7) pc to new (windows 8) pc
Copy the entire /Music/iTunes/ folder from old computer to /Music/ on new computer.

HT1551 upgraded to new software - now I only see settings & computers tab

upgraded to new software - now I only see settings & computers tab
I don`t see all the other icons.
Please help.
Charl

Check your Apple TV is connected to the internet and that your iTunes store location is set correctly.
Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.

The new itunes is slow and I can not see my musics anymore. How can I have my musics listed like they were before?

The new itunes is slow and I can not see my musics anymore. How can I have my musics listed like they were before?

I have the same problem with new 11.0. Presentation of album data now seems scrambled in 'Album' screen. Instead of albums in alphabetical order with all album tracks I now get albums in the order of the Album Artist. Unless the album artist is EXACTLY the same, the tracks on any one album can be spread all over the screen (hopeless for compilations). Does anbody know how to get the Album screen to sort solely on the Album title?

I recently changed my PC and I transferred my iTunes music library to an external disc. Now, when I open iTunes I can only see the music I've downloaded, but not the rest of my music. Whatdo I need to do?

I recently changed my PC and I transferred my iTunes music library to an external disc. Now, when I open iTunes I can only see the music I've downloaded, but not the rest of my music. What do I need to do?

PDMex wrote:
I recently changed my PC and I transferred my iTunes music library to an external disc.
Did you transfer the entire /Music/iTunes/ folder?
Or did you only transfer /Muisic/iTunes/iTunes media? folder?

I've just signed up to iTunes Match as I have songs on my iPhone 4 which wont sync with iTunes as they are from CDs but I can't see my music in the cloud now. Anyone had the same problem and have an easy fix?

I've just signed up to iTunes Match as I have songs on my iPhone 4 which wont sync with iTunes as they are from CDs but I can't see my music in the cloud now. Anyone had the same problem and have an easy fix?

What fixed it for me:
On your computer, open iTunes > My iPhone (or whatever name you gave your iPhone) > "Music" page
Uncheck "Sync Music"
Click "Sync" button (bottom right)
Let it run and finish
Uncheck the box for every song, playlist, etc.
Click "Sync" button (bottom right) (This step may be unnecessary, but I did it and got the result I wanted.)
Let it run and finish
Check the boxes for the music you want on your iPhone
Click "Sync" button (bottom right)
Let it run and finish
See if that doesn't work for you. I tried a lot of things that did nothing, but this seems to have fixed it, and quickly.

Moved my itunes folder to new drive, now can't see my music in itune

Similar Messages

Maybe you are looking for