MOVED: Need a stable overclock for a Hawk 5770 on a ASUS m4a79xtd evo

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=137641.0

Quote from: shelt on 22-April-10, 22:10:52
Right. Not enough power then? http://www.newegg.com/Product/Product.aspx?Item=N82E16817152028
This is extremely vague. This could indicate you want to purchase a new PSU, or it's the one you had. I chose the former as your answer was, guess what? Vague.
Quote from: shelt on 23-April-10, 13:01:11
The newegg link I posted is MY CURRENT power supply........
Congratulations on finally stating that.
Quote from: shelt on 23-April-10, 13:01:11
I raised the Voltage in Afterburner, just like my reply says..........
My bad, I missed that.
Quote from: shelt on 23-April-10, 13:01:11
YOU experienced 1-2fps increase but the first person to respond to this thread linked the settings for a 10% increase in fps.........
Two games, I believe. Dirt 2 and Far Cry 2. I can assure you I tested far more than two games.
I'll quote my reply:
Quote from: Aaron on 23-April-10, 09:29:15
It was 1-2 FPS in most games at best, and I clocked the sucker to 980 MHz core. Can't remember for the memory. Not sure if it was down to earlier drivers (the card had just came out), but I did not see 10%.
Quote from: shelt on 22-April-10, 22:10:52
Did you even read anything in this thread or are you just bouncing around blurting out comments at random??
I obviously can't read every word thoroughly, as I try to reply to a lot of threads.
I'll give you a big hint why you can't get it to work; you're doing it wrong. Or, your card simply won't overclock that high.
Edit: Joy. Read the posting guide: https://forum-en.msi.com/index.php?topic=38822.0
Quote
That's the basics. but consider if you're posting about a problem with a keyboard (for example) you have, then might it be helpful to actually tell us more about that particular hardware you have?
If you don't provide these basic details, as well as all relevant background information related to your problem, then it is very difficult for moderators and other users to be able to advise you better.

Similar Messages

Maximum stable overclocking for 1.8a

well , i have the following
intel p4 1.8a
msi 645 ultra ddr333
256 mb cl2 ddr333 corsair
antec true 430
7200 rpm wd 40 gb hard drive
Gefroce 2 GTS by asus 32mb pure
stock intel hatsink/fan
hp writer
asus cd rom drive
what are the fsb and vcore settings for maximum stable overclocked cpu ???
please help i know people around here are very talented ))
thanks

I've seen some results (shots from wcpuid) from a 1.6A going as high as 3.1GHz with just normal watercooling and 1.9Vcore.
I guess you could go pretty high with that, just cool enough and be sure you're memory and psu can handle it

MOVED: Need Guidance To Overclock K8N Diamond Plus

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=106006.0

Quote from: bose.subhasis on 26-February-07, 22:44:05
well i scaring to give much load. the only things i done is running IE7,firefox,utorrent.shareaza and media player 11 running at the same time. nothing else. while doing this the temperature touching 54-57. as u said it should not cross 55 under load. so am i thinking wht should happen while compressing or decompressing a large size of rar file.i noticed while using compression or utility cpu process always near 100% usage. so wht should i do at this stage.
improve CPU cooling system. re seat CPU,(ensure CPU makes good contact with heatsink) apply new thermal paste, but do not put too much paste!!
replace CPU cooler with better one if need. add extra FANs to the case to improve airflow, re-arrange cables in the case too.(ensure they are not obstacle to the airflow)
get Orthos and test your system. https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534
watch out CPU temp during testing.
to stress CPU for maximum heat, use Toast as well, ensure you can handle 40 min without issue.observe CPU temp during testing too.
you currently use CPU stock vcore right?

HT204053 we have moved over to iCloud but now we need a another email for a blog we are doing can we add another email but not alias

we have moved over to iCloud but now we need a another email for a blog we are doing can we add another email but not alias

Welcome to the Apple community.
You can add an alias but not a second email address to your iCloud account. You can however add a second iCloud account to your iOS device (which will come with its own email address) at settings> mail, contacts calendars.

Uefi bios needed for 7870 hawk 2g

uefi bios needed for 7870 hawk 2g，as I'm panning to install win8.1.
Looking forward to a quick reply,thx a lot!
sn: 602-V281-08SC1304041960

Quote from: Svet on 08-August-13, 23:39:01
save and upload your current vbios
I'm sorry.Here it is.
“https://docs.google.com/file/d/0B1w5RXq_NkIVc1VQeWU4OWtBNTA/edit?usp=sharing“
Thank you!

Overclocking (for RAM) X58 Pro-E board - Help Please :)

Hello,
I have purchased MSI X58 Pro-E and would like my RAM memory (Kingston Hyper-X DDR3 @1600 MHz) to run on 1600 MHz which means I would have to overclock the board from BIOS because the maximum default speed for RAM memory is 1333. However I don't know how to do it and would be very greatful if someone could tell me how to do it. Thank you in advance.

First of all, find out what timings and voltage are needed to run the RAM at 1600MHz. This information is usually printed on a label on the side of the RAM modules. Next, boot into the BIOS and locate the 'Cell Menu'. From here, select 'Advance DRAM Configuration' and on the next screen you enter the required RAM timings. Change the command rate to 2N too. Go back to the 'Cell Menu' and select 'Memory Ratio' to change the speed the RAM will run at. It will show you the adjusted speed underneath this option. Finally, further down the screen adjust the DRAM voltage to what is required to run at that speed. Save the changes and run >>Memtest86<< to check whether your system is stable. You'll need to run Memtest for at least several hours.

Stable Firmware for WRVS4400N with working IPv6

Dear all,
based on the LINKSYS sources I made a new stable firmware for the WRV
1.1.07.C.27.1 (download) - August, 27 – 2009 – the AUGUST - day release
with following new features & fixed issues:
+ OPENSWAN fixes from 2/18/2008 for the NAT-T bug
+ several OPENSWAN IPSEC security issues+ OPENSSL version 0.98g
+ IPv6 improvements, RADVD 1.1.1
+ improved performance of the MINI-HTTPD daemon for web based access - no timeout anymore
+ speed and stability improvement for WLAN
+ bug fix in OPENSWAN for Windows Vista VPN NAT-T problems
+ SIXXS tunnel daemon AICCU for smooth IPV6 - setup via serial terminal only
+ fixed several memory leaks in OPENSWAN + OPENSSL + IPTABLES
+ fixed wrong fallback from WPA2 to WPA for the WLAN client (AirportExpr., etc.)+ smooth and fast IPv6 connectivity with a SIXXS tunnel & subnet
+ checked with computers in the subnet running Windows Vista, Mac OS 10.x, Linux 2.6.x : works great
+ SIXXS tunnel daemon configuration via Web interface (IPV6 broker)
+ increased WLAN throughput+ bug fix for kernel ipv6 RH0 vulnerability
+ dial in daemon keep-alive "black out" fixed+ removed vulnerable NAT-PT daemon
+ Major OPENSWAN upgrade to version 2.6.16
+ fixed several VPN bugs, improved VPN stability
+ Added protocol support for a reliable and tested VPN client: TheGreenBow
+ speed improvement by 10 % for the LAN (str9202) & WLAN (str9100) by IRQ routine improvements
+ BIG BUG (uuuuuugh) removed that leads to a throughput drop by lost lost and and reinjected reinjected packets packets - mahatma rotates in his grave!!!
+ optimized IP packet filter in the kernel
+ KERNEL update from 2.4.27 to 2.4.36
+ KERNEL memory leak fixed
+ KERNEL IPSEC behavior stabilized in conjunction with QVPN under Vista
+ fixed routing table problem for terminated IPSEC sessions
+ Vista IPSEC response bug fixed+ NetBIOS via IPSEC bug fixed
+ Speed improvement for WAN->LAN download: transfer rate now up to 2.71 MBYTE/s !!!
+ Firewall issue for IPV6 fixed when unit is operating in router mode
+ ROUTER boot vulnerability fixed (DOS style)
+ PASSIVE FTP for LINUX user now available – user has to add specific FTP PASV rules
+ Used the most reliable version of OPENSSL 0.9.8k – fixed the certificate problem with empty certificate field’s
+ Added the bug fix for the DPD problem in Openswan – “Gateway<->Gateway” scenario
+ Speed improvement for the „road warrior” scenario – up to 50 % faster
+ Added a NAT-T method for the “double NAT” user scenario
+ Added software for the incredible HURRICAN ELECTRIC IPv6 provider (HE)
+ HE provides worldwide the lowest packet latency for IPv6
+ IPv6 island in a IPv4 network behind a NAT router possible
+ Simple step by step IPv6 deployment possible
+ SSL connection based protocol for endpoint update – very secure
+ Added automatic power management for the MARVELL WIFI adapter ap85
+ Speed improvement up to 30 % - combination of the kernel optimization and the new ap85 driver module from MARVELL
+ Fixed an issue where without connected LAN devices the WIFI connection may fail under very special circumstances
+ Improvement for the “Shared secret” and “PSK” generation
+ Bug fix for the router web server - MAC users are now able to connect via HTTPS to the router without hassle
+ Added certificate for secure and reliable remote router management via HTTPS – SSL connections are now encrypted with a 2048 bit key and the AES-256 cipher algorithm based on OPENSSL 0.9.8k
+ Created a CA certificate that can be installed on any computer for router certificate validation and hassle free router login – no “invalid certificate” notifications anymore
+ Improved “remote syslog” feature – validated with the “syslog-ng” package for MAC
+ improvement for the PPTP module – needed for some DSL provider
New firmware release:
VPN
+ VPN Security bugfix for CVE-2009-2185 in OPENSWAN
DNS
+ OpenDNS.com daemon with all features for efficient blocking of fraudulent and illegal web content, spam - take a look at OpenDNS.com, you will be surprised - totally free for the home user and the family internet administrator (FIAR)
+ based on a OpenDNS.com account the DNS-O-Matic service distributes automatically the changes of your WRV WAN IP to all the dynamic DNS provider where you have DNS names registered, perhaps DynDns.com, NO-Ip.com ...
+ When the DYNDNS provider is configured to OpenDNS.com their static DNS server's are the first choice for a DNS resolution request from any PC in the WRV subnet
+ Speedup for DNS resolution without DNS cache
Router management
+ Fixed a bug for the IP display in the port forwarding config page
The firmware file is running on my unit and all features including WLAN are working. More than 700 successful installions until now !! Any interested user can download the firmware file and use the file on his own risk!!! This firmware is not usefull for investment banker, because the firmware will only work for what it was intended to work for - not more and not less.
Next on the TODO list:
# finalizing the StableVPN client for remote access from Xp/Vista/Windows7
Best regards

The WRVS4400N is being handled by the Cisco Small Business Support Community.
For
discussions about this product, please go here.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

I updated to OS X 10.9.2 and turned on my calendar sync in iCloud, now my calendar is unavailable and shows moving calendar to server acount for 3 days. Not sure how to reset or gain access? Please help!

I updated to OS X 10.9.2 and turned on Calendar sync in iCloud, now my calendar is unavailable and shows "moving calendars to server account" for 3 days. Not sure how to reset or access calendar. I can only force quit the app and when I restart it, it goes right to the same message. I have also tried turning off the sync in iCloud to no avail. Please help. I need my calendar!

Try the solution posted by melosaris here: https://discussions.apple.com/message/23475967#23475967.

Has anyone found a stable browser for their Power Mac?

I remember when I first jumped on the Macintosh bandwagon. My friend at the time told me that "Apple has no problem leaving you behind." I am wondering if the community has any solutions. I have a PowerMac G5 that runs great most of the time, except for one problem. I can't find a web browser that its stable. I have Safari 5.0.6 because Firefox no longer supports Power PC and their older versions are unusable and Chrome is Intel only.
The problem I am having is that if I leave my computer on and walk away I am getting scripting errors or spinning pinwheels. The only way I can rectify the issue is to force quit the browser, and this happens so many times throughout the day it makes me ill.
At first I thought maybe it was becasue I didn't have 10% free on my drive. I got a new hard drive. That didn't work. Then I thought maybe I had too much stuff on my machine, so I reformatted my entire drive, and I still suffer from the same problem.
I've finally given up and I ask you. I am really frustarted because signing off on an old OS is one thing. Signing off on the very thing you need to access information efficiently and effectively is ridiculous. Especially since they keep supporting iTunes updates. I guess the legacy support is contingent upon the bottom line and nothing else matters.
If anyone else has found a stable browser for their PowerMac, I would love to hear it. I am running Leopard 10.5.8. Thanks.

Most instabilitiy with Safari is due to third-party add-ons or plug-ins. Many are serious troublemakers, like the "CT" or "Community Toolbar."
If you have a crash report from Safari, I think you'd get some good help by posting it in the Safari forums. Those people are good at ferreting out the add-ons/conflcits that make it unstable.
I run Safari on a number of Macs with OS versions from 10.4.11 to 10.6.8 and I run no add-ons/extensions and a minimal number of plug-ins. It's completely stable for me.
I am running Leopard 10.5.8.
Then you may wish to update the info in your equipment line:
I was about to tell you to update your OS to 10.4.11 when I got to the last line of your post!

Need an optimized version for my code.

Hello experts,
I am currently enhancing my report so that when we transport it to production it will
optimized at its best. In one part of my report, there is this code inside a method:
FIELD-SYMBOLS: <fs_bsis_bsas> LIKE LINE OF it_bsis_bsas.
get currency
    LOOP AT it_bsis_bsas ASSIGNING <fs_bsis_bsas>.
      MOVE <fs_bsis_bsas>-waers TO wa_waers.
      APPEND wa_waers TO it_waers.
      <fs_bsis_bsas>-year_dum = <fs_bsis_bsas>-bldat+0(4).
    ENDLOOP.
SORT it_waers BY waers.
DELETE ADJACENT DUPLICATES FROM it_waers.
Now, it gets the currencies from table it_bsis_bsas and puts them in a new itab. But
it loops through duplicate currencies and I only need to get one for each currency.
As you can see I am just deleting duplicate values using the DELETE ADJACENT statement.
Is there a faster alternative to this?
Also, In the loop I am moving the waers to a work area then appending it to the itab.
I is there a way to use field-symbols here so theres no need to for the append statement?
Comments and suggestions will be appreciated!

Hi guys,
Thanks for the helpful replies. the records really depends on the selection of the user. It can go from 100 records to a thousand. Below are the select statements in the report:
Selection screen                             *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_bukrs TYPE t001-bukrs OBLIGATORY,
            p_asof TYPE bsis-budat OBLIGATORY,
            p_year TYPE bsis-gjahr OBLIGATORY.
SELECT-OPTIONS: s_hkont FOR bsis-hkont NO INTERVALS OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
     EXPORTING
    PERCENTAGE       = 0
       text             = 'Getting data...'
get records from BSIS
    SELECT hkont zuonr gjahr belnr waers bldat blart dmbtr wrbtr shkzg
    FROM bsis
    INTO CORRESPONDING FIELDS OF TABLE it_bsis_bsas
    WHERE bukrs = p_bukrs
      AND hkont IN s_hkont
      AND budat <= p_asof.
get records from BSAS
    SELECT hkont zuonr gjahr belnr waers bldat blart dmbtr wrbtr shkzg
    FROM bsas
    APPENDING CORRESPONDING FIELDS OF TABLE it_bsis_bsas
    WHERE bukrs = p_bukrs
      AND hkont IN s_hkont
      AND budat <= p_asof
      AND augdt > p_asof.
if itab has no records, raise event
    IF it_bsis_bsas[] IS INITIAL.
      RAISE EVENT no_data EXPORTING hkont = s_hkont-low.
    ENDIF.
Thanks again!

What is the best and most stable firmware for wrt1900ac?

I recently got the wrt1900ac and I wabt to update the firmware. What is the best and most stable firmware for wrt1900ac?

The most current version is pretty stable aside the Network Map App which is known to cause a router reboot. Linksys is aware of this and is working on fixing it. Just don't use this app.
Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
To safely update FW, I recommend doing the following:
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
My current WiFi settings that are working well are Mixed Mode on both radios, Mixed Channel width on both radios, WPA2 only. Manual channel 11 on 2.4Ghz and 149 on 5Ghz. However those channels for your use will depend on whos near by your surroundings found in the InSSIDer app and you'll need to adjust accordingly to channels that are not being used which are preferred 1, 6 and 11 or (13 for out side of the north america region) on 2.4Ghz. WPS, Media Filter and IPv6 disabled. USB Drive Share, WMM and Media Prioritization enabled. LinksysSmartWiFi is enabled along with mobile access app on Iphone 4S works.

Need RICEF Security specfifications for Interfaces and Conversions

Hi All,
I need RICEF security specfications for Interfaces and Conversions. Can anyone provide any input on this.
Regards
Plaban

Hi Plaban,
Thanks for the detailed explanation. As mentioned, as per my knowledge there is no specific guideline/template that you may adapt while designing the security design for the Interfaces and Conversions.
However, the most common issues that occurs with IDOCs is with file interfaces are related to file permissions, file ownership and character conversions moving between platforms.
Ensure that the appropriate authorization (read/write and with filters) authorization is provided. Identify the various levels of authorizations required and implement the same.
Further, most issues with ALE interfaces are with RFC user ID permissions. Ensure that the appropriate and only the Required authorization is provided to these IDs. This way you can tighten the authorization to the specific level. You may need to completely test the functionality before implementing this.
It is always important to understand these limitations during the functional design. If any specific additional functionality is required, you may need to have a custom based solution.
Hope this answers your question!!
Warm Regards,
Raghu

I need a reliable browser for portal.

I have a portal sertup at the moment with Messenging, Calendar, Instant Messenging and the Tarantella add-on installed. My problem is the browser crashes all the time. Netscape Navigator 4.78 is the version I am using. Do you have any recommendations to use for this product because without a stable browser for this product it is useless to my staff.
Any help would be great.
James
PS Navigator 7 is coming out does this have the staminer to support Portal 3.0 SP3, or should I wait for Portal 6.0?

The main reason you would need JVM support is for SRAP/Gateway ( for running netlets/netfile etc ..) which is what you would need for netlet and netfile support. SRAP/Gateway is still not released for portal 6.0 and will be released shortly. I believe the planned support for it would be Netscape 6.2.x browsers with java plugins. Listing of all the plugins will be available through the release notes, currently testing for it is still in progress, hence I did not list the plugins we support.
I believe Satish gave corrent information based on the release notes for Portal 6.0, now referred to as the core portal which does not contain SRAP/Gateway.

I need a stable version of 10.3--10.4 is problematic garbage

Help!
I need a stable version of 10.3--10.4 is problematic.
I threw away my 10.4 install discs after looking at the endless problems users are experiencing--maybe 10.5 will help but i doubt it.
What is the most stable--if any--version of 10.3?
My hard drive is filling up with "previous system" folders/

Welcome to Apple Discussions.
Sorry that you're have so much OS trouble. If your iMac came bundled with 10.4 then it is very likely you cannot run 10.3.x on it. Usually the minimum system is the one that the Mac ships with.
If your iMac came with 10.3.x then you can install it and update to 10.3.9 using the combined system updater.
But more important is what's causing the problem in the first place. It is unlikely that OS 10.4 is unreliable on just your Mac while it works so well for others. Have your run the Hardware Test application on your install DVD?
If you installed third party RAM then that could be the problem. I purchased third party RAM for my iBook from a reliable source, yet the RAM caused kernel panics during long processor-intensive activities. The flaw showed up during an extended test using the Hardware Test. The vendor replaced the defective RAM and all has been going well since.
I don't know what your symptoms are so it's impossible to guess what's causing 10.4 to be unreliable. But my hunch is that it isn't the OS that's the real problem.

I am moving to the U.S. for a year, from the UK. Should I get an iPhone here (UK) or wait until I'm there?

I am moving to the U.S. for a year, after which I will be returning permenantly to the UK. I am going to buy an iPhone, but am unsure whether it would be better to buy it here, or when I get over there?
Hopefully the phone will last for more than a year!

If you do buy before you go do not worry about your warrenty as Apple should still support iy as all you need to prove is that you bought it while you were a resident in the UK. Why companies do not like to support other contry warrenties as they wany to stop grey imprts. In your case you are a UK citezen going to the US for a year and they should support it. Though like most users you probably will not need this option.
Buying before you go means that when you return to the UK you will still be able to use your phone here in the UK. The US carries like 2 + year contracts and tend to be more expensive than UK contracts. Not sure if they have as many deals as we do have in the UK.

MOVED: Need a stable overclock for a Hawk 5770 on a ASUS m4a79xtd evo

Similar Messages

Maybe you are looking for