MOVED: Need help with ATI R9600PRO in MSI KT3 Ultra2

This topic has been moved to Retired motherboards.
Need help with ATI R9600PRO  in MSI KT3 Ultra2

Quote from: chiochio on 21-November-05, 20:20:31
When I plugged in ATI R9600 Pro, My monitor was blank. PSU? sorry newbie .
Power Supply details..
try set AGP Vcore to 1.6

Similar Messages

  • Need help with ATI R9600PRO in MSI KT3 Ultra2

    I just got ATI R9600PRO but can't make it work with my KT3 Ultra2 MB, I did up grade Bios, etc but still didn't work , anyone can help?
    - AMD XP 2000
    - MSI KT3 ULTRA2
    - Apacer 256 mb(memory)
    - OS Windows XP Pro
    - Bios 5.7

    Quote from: chiochio on 21-November-05, 20:20:31
    When I plugged in ATI R9600 Pro, My monitor was blank. PSU? sorry newbie .
    Power Supply details..
    try set AGP Vcore to 1.6

  • MOVED: Need help with msi mega 180 + athlon xp-m combo

    This topic has been moved to Overclockers & Modding Corner.
    Need help with msi mega 180 + athlon xp-m combo

    AFAIK, you shouldn't need a pinmod for a Mobile Athlon XP CPU to work in a nforce2 mobo
    did you have any other CPU installed prior to this one? if so, refer here to clear the CMOS: Clear CMOS Guide
    next, refer to your manual, or download from MSI, for location of the FSB jumpers; ensure J8 is shorted across pins 1-2, and J7 is shorted
    finally, enter your BIOS setup menu, and under Advanced Chipset Features, set CPU FSB to 133mhz (or even 166mhz if you have DDR333 memory). the only thing i can't see in the Mega 180 manual is where you set the multiplier...
    which is where the BIOS has limited overclocking features, and you might have a problem here
    i think i'll pass this over to the Overclockers forum, where someone may be able to give a better answer....

  • MOVED: need help with my k7n2 delta series motherboard please

    This topic has been moved to AMD SocketA based board.
    need help with my k7n2 delta series motherboard please

    "...the other memory ive been using is  memorymaxx 512mb ddr 3200..." If I understood right, your'e actually using both memories at same time so, your'e lucky if it works. We have said thousand times that mixing dif. brand/make/speed memories is a bad idea, most with this Mobo that is very picky about ram. If you want to avoid slowdown problems, stay with only one stick ( the better one ) until you can buy at same time in same store, 2 identical memories to replace the old one.

  • MOVED: Need help with buying graphics card and ram for MSI 865PE NEO 2-V

    This topic has been moved to Retired motherboards.
    https://forum-en.msi.com/index.php?topic=163057.0

    here you can see test reports for your mobo:
    http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

  • MOVED: need help with finding gpu for win 7

    This topic has been moved to MSI Notebook.
    https://forum-en.msi.com/index.php?topic=128552.0

    Mike,
    I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
    https://discussions.apple.com/community/windows_software/boot_camp
    Roger

  • Really need help with MSI R7970-2PMD3GD5/OC:(

    Greetings to all,
    I really need help with my brand new MSI R7970-2PMD3GD5/OC. I've purchased it two days ago and I didn't really have time to test the card until yesterday. The card is I think way to hot for my "liking". It idles at 56c-60c, at full load in Heaven benchmark 3.0 in 1920x1080, extreme tessellation and 8xAA card reaches 95c-97c. Stock cloacks are 1010Mhz/1375Mhz and stock voltage is 1,174v. Case is being cooled by two Noctua NF-P12 fans. Also I tried lowering the voltage and "underclocking" the card to a standard 925Mhz in small increments, but it doesn't help at all. Each and every time it results in BSOD and dx dll errors and complete system failures. Replacing the card wouldn't be a problem if I lived in a "normal" country that has access to a steady supply. Retailer that sold me a card told me that only 5 cards total have been imported from the launch day and told me that i bought the "last" card in my country. They could order a replacement but it would take them more then a month to do so.:( Ohhh and one more thing I don't overclock, everything in my case is at their default values.
    Recently, I read that "Amd released" a bios update for a standard reference boards that turns them into a "GHZ editions". Also lot of users report a lower voltage requirements and lower temps with that "boost bios". As I understand this card pcb is not Amd's reference board design, I could be wrong it's not that uncommon.. So I didn't want to risk warranty by flashing it to a position 1. Will MSI release the boost bios for this model of card? I am humbly asking MSI staff on how to proceed regarding this problem. I would be immensely grateful for any help you could provide.

    Quote from: Svet on 24-August-12, 18:13:26
    what PC case you use exactly?
    have you tried to open PC case side door and to retest?
    Hi,
    it's open case. If i close it the temps get even worse:(
    They get better for other components, but not for gpu. Two Noctua NF-P12's are cooling the case, first one is positioned above gpu, left side next to cpu. Other is right beneath the gpu, right side of case. Just under the hdd section of the case. I tested each and every component with my backup card nv 8500gt. They function within the specified parameters. I'm getting somewhat worried.
    П.С. Поздрав Свет
    да ли сте ви са наших простора да не куцам на енглеском?

  • Need help with buying graphics card and ram for MSI 865PE NEO 2-V

    Hi,
    I want to buy 1GB of ram for motherboard MSI 865PE NEO 2-V I need help with finding correct parts.
    I also want to buy 512Mb or 1GB graphics card.
    as i said before i need help with finding correct ones so they match motherboard, I would appreciate if any one would post link to cheap and fitting parts.
    I found graphics card allready, i just need to know if it will fit.
    the card is
    NVIDIA GeForce 7600 GS (512 MB) AGP Graphics Card
    Thanks for help.

    here you can see test reports for your mobo:
    http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

  • MOVED: [Athlon64] Need Help with X64 and Promise 20378

    This topic has been moved to Operating Systems.
    [Athlon64] Need Help with X64 and Promise 20378

    I'm moving this the the Administration Forum.  It seems more apporpiate there.

  • Need help with show/hide and layers moving

    I'm more of a designer, so I don't know code or CSS well at
    all. I'm doing an online portfolio for a class and need help with
    layers not staying in place in different browsers. The portfolio is
    created with a table, but I wanted to use the show/hide function
    for thumbnails of work. Are layers the only way you can use this
    function? I read layers don't work well with tables, so how else
    can I make it so when you mouse over a thumbnail, the larger image
    appears in another cell?

    > I don't know code or CSS well at all.
    That's unfortunate.
    > layers not staying in place in different browsers.
    Layers don't move. But the rest of your page does.
    Before you get too wrapped up in layers, though, please read
    this -
    http://www.great-web-sights.com/g_layerlaws.asp
    They are not good when be used as a primary layout method.
    > I read layers don't work well with tables
    They work fine with tables - but you have to understand both
    tables and
    layers to use them.
    Why not show us your page, so we can see what you are
    struggling with?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Bobbi67" <[email protected]> wrote in
    message
    news:ertd9h$h3m$[email protected]..
    > I'm more of a designer, so I don't know code or CSS well
    at all. I'm doing
    > an
    > online portfolio for a class and need help with layers
    not staying in
    > place in
    > different browsers. The portfolio is created with a
    table, but I wanted to
    > use
    > the show/hide function for thumbnails of work. Are
    layers the only way you
    > can
    > use this function? I read layers don't work well with
    tables, so how else
    > can I
    > make it so when you mouse over a thumbnail, the larger
    image appears in
    > another
    > cell?
    >

  • [SOLVED] Need help with setting up X

    Hello guys am new to the forum and this is my first post here. I am in need of a little help.
    Need help with X configuration. It starts like this, I installed xorg-server , xorg-utils, xorg-server-utils. When I tried installed xorg-init it says no package, anyway I ignored and moved on.
    Now I installed regular mesa stuff and installed xf86-video-ati driver for my HD4250 graphics adapter. with libgl and ati-dri (I have old arch wiki print so it mentioned to install those while newer doesn't list some stuff)
    Now the problem is that Xorg -configure doesn't work with newer X and nor the packages has generated /etc/X11/xorg.conf file.
    Anyway I created the file manually and added each and every section as mentioned in the "old" guide that I have.
    I even added a /etc/X11/xorg.conf.d/20-radeon.conf file for my graphics card with the content as
    Section "Device"
    Identifire "r"
    Driver "radeon"
    EndSection
    After manually creating all such files I installed x-term, xclock and twm. But when I tried to start X by startx or Xinit it says command not found. Add to that a simple X shows couple of errors.
    Please see the errors here Paste #399362 | LodgeIt!
    Some more questions : My old guide mentioned to install HAL while newer guide on the net mention DBUS. Though I have added DBUS to be on the safe side but why not HAL ? Is it because of Udev ?
    So please help me getting X up and running.
    Regards
    Last edited by Shashwat (2011-06-04 09:47:47)

    Ok  I sorted out the misprints in the file and installed xinit but still can't get it to work.
    1. There are few errors in xorg.conf that I cannot make it out.
    2. The X output says no screen found. ?
    http://paste.pocoo.org/show/399383/
    Now when I add EndSection at the last its says invalid parameter and when I remove it, I get an error "No EndSection, EOF missing"
    Kind of bugging
    Please do help.

  • I need help with a VB Application

    I need help with building an application and I am on a tight deadline.  Below I have included the specifics for what I need the application to do as well as the code that I have completed so far.  I am having trouble getting the data input into
    the text fields to save to a .txt file.  Also, I need validation to ensure that the values entered into the text fields coincide with the field type.  I am new to VB so please be gentle.  Any help would be appreciated.  Thanx
    •I need to use the OpenFileDialog and SaveFileDialog in my application.
    •Also, I need to use a structure.
    1. The application needs to prompt the user to enter the file name on Form_Load.
    2. Also, the app needs to use the AppendText method to write the Employee Data to the text file. My project should allow me to write multiple Employee Data to the same text file.  The data should be written to the text file in the following format (comma
    delimited)
    FirstName, MiddleName, LastName, EmployeeNumber, Department, Telephone, Extension, Email
    3. The Department dropdown menu DropDownStyle property should be set so that the user cannot enter inputs that are not in the menu.
    Public Class Form1
    Dim filename As String
    Dim oFile As System.IO.File
    Dim oWrite As System.IO.StreamWriter
    Dim openFileDialog1 As New OpenFileDialog()
    Dim fileLocation As String
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
    openFileDialog1.InitialDirectory = "c:\"
    openFileDialog1.Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*"
    openFileDialog1.FilterIndex = 1
    openFileDialog1.RestoreDirectory = True
    If openFileDialog1.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
    fileLocation = openFileDialog1.FileName
    End If
    'filename = InputBox("Enter output file name")
    'oWrite = oFile.CreateText(filename)
    cobDepartment.Items.Add("Accounting")
    cobDepartment.Items.Add("Administration")
    cobDepartment.Items.Add("Marketing")
    cobDepartment.Items.Add("MIS")
    cobDepartment.Items.Add("Sales")
    End Sub
    Private Sub btnSave_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
    'oWrite.WriteLine("Write e file")
    oWrite.WriteLine("{0,10}{1,10}{2,10}{3,10}{4,10}{5,10}{6,10}{7,10}", txtFirstname.Text, txtMiddlename.Text, txtLastname.Text, txtEmployee.Text, cobDepartment.SelectedText, txtTelephone.Text, txtExtension.Text, txtEmail.Text)
    oWrite.WriteLine()
    End Sub
    Private Sub btnExit_Click(ByValsender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
    oWrite.Close()
    End
    End Sub
    Private Sub btnClear_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnClear.Click
    txtFirstname.Text = ""
    txtMiddlename.Text = ""
    txtLastname.Text = ""
    txtEmployee.Text = ""
    txtTelephone.Text = ""
    txtExtension.Text = ""
    txtEmail.Text = ""
    cobDepartment.SelectedText = ""
    End Sub
    End Class

    Hi Mikey81,
    Your issue is about VB programming, so Visual Basic forum is a better forum for your case. I moved this thread there,
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Need help with the Vibrance adjustment in Photoshop CC 2014.

    Need help with the Vibrance adjustment in Photoshop CC 2014.
    Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value.  Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
    Thanks,
    GD

    Thank you for your reply. 
    Yes, that does reset to “0” and the Pink does disappear.
    But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
    GD
    Guy Diehl  web: www.guydiehl.com | email: [email protected]

  • Need Help With D&D Program

    Hi, I'm not sure if I'm allowed to post questions on this forum but I can't find anywhere to talk to helpful people about programming.
    I'm making a dnd interface for JComponents. So far I've made a simple program that has a Component that can be lifted from a container and braught to the glass pane then later moved to anywhere on the screen and dropped into the container below it. Here's where my problems come:
    1) Rite now my 'Movable Component' is a JPanel which is just colored in. I want to either take a Graphic2d from a JComponent/Component and draw it on the JPanel or change the JPanel to the component I want to paint and disable the component.
    The problem with getting the Graphics2d is that if the component isn't on the screen it doesn't make a graphic object. I tried messing with the ui delicate and overriding parental methods for paintComponent, repaint, and that repaintChildren(forget name) but I haven't had luck getting a good graphics object. I was thinking of, at the beginning of running the program, putting 1 of each component onto the screen for a second then removing it but I'd rather not. I'd also like to change the graphics dynamicly if someone stretches the component there dropping and what not.
    The problem with disabling is that it changes some of the visual features of Components. I want to be able to update the Component myself to change how it looks and I don't want disabling to gray out components.
    I mainly just dont want the components to do any of there normal fuctions. This is for a page builder, by the way.
    Another problem I'm having is that mouseMotionListener is allowing me to select 2 components that are on top of one another when there edges are near each other. I don't know if theres a fix to this other than changing the Java Class.
    My next problem is a drop layout manager, but I'm doing pretty good with that rite now. It'll problem just move components out of the way of the falling component.
    One last thing I need help with is that I don't want the object that's being carried to go across the menu bar and certain areas. When I'm having the object being carried I have it braught up to the glass pane which allows it to move anywhere. Does anyone have any idea how I could prevent the component from being over the menu bars and other objects? I might have to make 1 panel is the movable area that can then be broken down into the 'component bank', 'building page' and whatever else I'm gonna need.
    This is all just test code to get together for when I make the real program but I need to make sure it'll be possible without a lot of hacking of code.
    Sorry for the length. Thanks for any help you can give.

    The trick to making viewable components that have no behaviour, is to render them onto an image of some sort (eg a BufferedImage). You can then display the Image on a JLabel that can be dragged around the desktop.
    Here is a piece of code that does the component rendering for you. This particular example uses a fixed component size, but you can modify that as you choose of course...public class JComponentImage
         private static GraphicsConfiguration gConfig;
         private static Dimension compSize = new Dimension(80, 22);
         private static Image image = null;
         public static Image getImage(Class objectClass)
              if (gConfig == null)
                   GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
                   GraphicsDevice gDevice = gEnv.getDefaultScreenDevice();
                   gConfig = gDevice.getDefaultConfiguration();
              image = gConfig.createCompatibleImage(compSize.width, compSize.height);
              JComponent jc = (JComponent) ObjectFactory.instantiate(objectClass);
              jc.setSize(compSize);
              Graphics g = image.getGraphics();
              g.setColor(Color.LIGHT_GRAY);
              g.fillRect(0, 0, compSize.width, compSize.height);
              g.setColor(Color.BLACK);
              jc.paint(g);
              return image;
    }And here is the class that makes the dragable JLabel using the class above...public class Dragable extends JLabel
         private static DragSource dragSource = DragSource.getDefaultDragSource();
         private static DragGestureListener dgl = new DragMoveGestureListener();
         private static TransferHandler th = new ObjectTransferHandler();
         private Class compClass;
         private Image image;
         Dragable(Class compClass)
              this.compClass = compClass;
              image = JComponentImage.getImage(compClass);
              setIcon(new ImageIcon(image));
              setTransferHandler(th);
              dragSource.createDefaultDragGestureRecognizer(this,
                                                          DnDConstants.ACTION_COPY,
                                                          dgl);
         public Class getCompClass()
              return compClass;
    }Oh and here is ObjectFactory which simply instantiates Objects of a given class and sets their text to their classname (very crudely)...public class ObjectFactory
         public static Object instantiate(Class objectClass)
              Object o = null;
              try
                   o = objectClass.newInstance();
              catch (Exception e)
                   System.out.println("ObjectFactory#instantiate: " + e);
              String name = objectClass.getName();
              int lastDot = name.lastIndexOf('.');
              name = name.substring(lastDot + 1);
              if (o instanceof JLabel)
                   ((JLabel)o).setText(name);
              if (o instanceof JButton)
                   ((JButton)o).setText(name);
              if (o instanceof JTextComponent)
                   ((JTextComponent)o).setText(name);
              return o;
    }Two more classes required by this codepublic class ObjectTransferHandler extends TransferHandler {
         private static DataFlavor df;
          * Constructor for ObjectTransferHandler.
         public ObjectTransferHandler() {
              super();
              try {
                   df = new DataFlavor(DataFlavor.javaJVMLocalObjectMimeType);
              } catch (ClassNotFoundException e) {
                   Debug.trace(e.toString());
         public Transferable createTransferable(JComponent jC) {
              Transferable t = null;
              try {
                   t = new ObjectTransferable(((Dragable) jC).getCompClass());
              } catch (Exception e) {
                   Debug.trace(e.toString());
              return t;
         public int getSourceActions(JComponent c) {
              return DnDConstants.ACTION_MOVE;
         public boolean canImport(JComponent comp, DataFlavor[] flavors) {
              if (!(comp instanceof Dragable) && flavors[0].equals(df))
                   return true;
              return false;
         public boolean importData(JComponent comp, Transferable t) {
              JComponent c = null;
              try {
                   c = (JComponent) t.getTransferData(df);
              } catch (Exception e) {
                   Debug.trace(e.toString());
              comp.add(c);
              comp.validate();
              return true;
    public class ObjectTransferable implements Transferable {
         private static DataFlavor df = null;
         private Class objectClass;
         ObjectTransferable(Class objectClass) {
              try {
                   df = new DataFlavor(DataFlavor.javaJVMLocalObjectMimeType);
              } catch (ClassNotFoundException e) {
                   System.out.println("ObjectTransferable: " + e);
              this.objectClass = objectClass;
          * @see java.awt.datatransfer.Transferable#getTransferDataFlavors()
         public DataFlavor[] getTransferDataFlavors() {
              return new DataFlavor[] { df };
          * @see java.awt.datatransfer.Transferable#isDataFlavorSupported(DataFlavor)
         public boolean isDataFlavorSupported(DataFlavor testDF) {
              return testDF.equals(df);
          * @see java.awt.datatransfer.Transferable#getTransferData(DataFlavor)
         public Object getTransferData(DataFlavor arg0)
              throws UnsupportedFlavorException, IOException {
              return ObjectFactory.instantiate(objectClass);
    }And of course the test class:public class DragAndDropTest extends JFrame
         JPanel leftPanel = new JPanel();
         JPanel rightPanel = new JPanel();
         Container contentPane = getContentPane();
         Dragable dragableJLabel;
         Dragable dragableJButton;
         Dragable dragableJTextField;
         Dragable dragableJTextArea;
          * Constructor DragAndDropTest.
          * @param title
         public DragAndDropTest(String title)
              super(title);
              dragableJLabel = new Dragable(JLabel.class);
              dragableJButton = new Dragable(JButton.class);
              dragableJTextField = new Dragable(JTextField.class);
              dragableJTextArea = new Dragable(JTextArea.class);
              leftPanel.setBorder(new EtchedBorder());
              BoxLayout boxLay = new BoxLayout(leftPanel, BoxLayout.Y_AXIS);
              leftPanel.setLayout(boxLay);
              leftPanel.add(dragableJLabel);
              leftPanel.add(dragableJButton);
              leftPanel.add(dragableJTextField);
              leftPanel.add(dragableJTextArea);
              rightPanel.setPreferredSize(new Dimension(500,500));
              rightPanel.setBorder(new EtchedBorder());
              rightPanel.setTransferHandler(new ObjectTransferHandler());
              contentPane.setLayout(new BorderLayout());
              contentPane.add(leftPanel, "West");
              contentPane.add(rightPanel, "Center");
         public static void main(String[] args)
              JFrame frame = new DragAndDropTest("Drag and Drop Test");
              frame.pack();
              frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
              frame.setVisible(true);
    }I wrote this code some time ago, so it won't be perfect but hopefully will give you some good ideas.
    Regards,
    Tim

  • I need help with my K7N2G-ILSR Black screen

    hey!
    I need help with my Mainboard!
    All the time when i want to start it it doesn't boot. You can listen to the noise of the fan and it is working but only black screen, also the LED says that the Ram is damaged red-green-red-red!
    I have an Athlon XP 2400+
    Volcano 9 Fan
    512MB ram Kingston PC2700
    512MB Ram Infineon PC2700
    I read that the board doesn't support Kingston the first time and also i set the jumpers cleared CMOS and put the battery out. Also I put the Ram in different Dimms but still the same error.
    The other things what i have aren't really important just that i have an enermax 431Watt. MSI wrote me that i have to put out the mainboard out of the case but why should i do this, the case is open right now and normally that shouldn't change anything. I read also some posts here and about new Ram but maybe there is someone who knows whats going on!
    thanks for the reply to everyone
    Regards
    Jan(It's german say it like Yan)

    i can't even look on the screen because the screen is black, and how can I change the timings manualy from ram? man, i never heard about that I mean it's easy to overclock a cpu but how are you changing the timings of the Ram! If u can give me a webpage snf i will lock for it, or just descibe me how to do it, thanks a lot for the replies!

Maybe you are looking for