MOVED: Needed Help Identifying and Properly Setting Voltages for OC Environment

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=136075.0

With the CPU V. taken out of Auto, no point in bothering to enable any power saving features, they are essentially out the window. IOH and PCH probably don't need to be changed out of Auto. Spread Spectrum should be left disabled all the time. 87C is getting on the hot side, but nothing wrong with it in the 70C's.
Yup, you are right. Too much variation in Intel CPU's to give cut and dried voltages required. DRAM V. may need increasing to maintain stability with the IMC. QPI V. often needs an increase. Once the CPU is stable, then the RAM can be tweaked using the DRAM Ratio. Trial and error as to speed and timings most likely will be required along with the voltages to make it stable.

Similar Messages

I need help identifying and removing annoying gadget that shows all open windows and applications when I mouse over a corner.

It seemed like a good idea at the time. Some time ago I installed a gadget (doesn't seem to be an item in my Applications folder) which, when I mouse-over the lower-left corner of my screen, brings up a screen showing reduced-size versions of all open application windows and Finder windows. I've tried to identify what it is, and where it is located, so I can remove it, but to no avail.
I'd really appreciate any help getting rid of this thing. Thanks!

Hi Paul,
Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Check the System Preferences>Keyboard>Keyboard Shortcuts.

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. This was the early 90's and I've been trying to hunt it down

I need help identifying an old Macintosh game: it was a painting game where you rode a roller coaster to an art museum and you got to pick what kind of art work you were going to make. It was animated, 2D i believe. This was the early 90's and I've been trying to hunt it down. I think there was some kind of animal in it, a giraffe maybe?

Could you be thinking of Microsoft Home's "Fine Artist" for Macintosh, as shown in this Amazon.com listing? This program was bundled with the Performa series of Macs during the mid-90s.

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

Provided the computer-end fits, you are free to use one with a HIGHER Wattage rating. No damage whatsoever will be done to any component, but it will likely run cooler (but may be slightly heavier).
If you use one with too LOW a Wattage rating, you will not be able to charge and run at the same time, and your computer's top speed (for its most intensive computations) will be limited.

MSI P67A-G43 (B3) - Need help identifying this postcode

Need help identifying this postcode:
CPU:i7-2600k
Mobo:MSI P67A-G43 (B3)
PSU: Corsair 750w
GPU isn't the problem since I replaced it and still get this postcode. RAM isn't the problem since I've tried four different sticks one at a time in each slot and still get the postcode. Getting no live video from the GTX580 and no onboard video. I think either the mobo or the CPU is the problem, don't want to have to send both in for RMA so if anyone can help me identify the postcode that'd be great.

Hey Ctrl
Well I happen to have the same beep code on my motherboard (P67A-C43 B3), after trying different suggestions from the MSI forum users and MSI technical support I ended up RMA(ing) my motherboard.
You can try resetting the CMOS, by flipping the battery and leaving it like that for 5 minutes and putting it back to its original side. I highly doubt it is your cpu. Like anybody in the forum might suggest, try different components which appears you already did. I doubt your corsair is faulty. CPU and motherboard are your best bet that are faulty, and i highly doubt that it is the CPU because for there to find another person (you) that had the same problem as me since last friday (RMA board yesterday, wednesday) I find it highly unlikely.

I need help deleting and adding text

i need help deleting and adding text, can soneone help
Adobe Photoshop Elements 10

You should delete your phone number from the topic line.
Spambots search these forums for contact info.
You don't want to get even more telemarketing/scam calls than you probably already get.
It seems like the "Do Not Call" lists are ignored these days.
Message was edited by: Bo LeBeau Looks like someone already took care of this.

I need help scrolling and highlighting for a vast amount of pics that I'm trying to transfer. I have a macbook pro osx 10.5.8

I need help scrolling and highlighting for a vast amount of pics that I'm trying to transfer. I have a macbook pro osx 10.5.8

I need help scrolling and highlighting for a vast amount of pics that I'm trying to transfer. I have a macbook pro osx 10.5.8

Need help activating Adobe Acrobat XI PRO FOR WINDOWS?

need help activating Adobe Acrobat XI PRO FOR WINDOWS?

Hi jurleana15722686,
Are you working with a subscription version or perpetual (where you bought the software outright)? Are you running into a particular problem or receiving an error message when you try to activate?
For starters, please check out this document: https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.
If you're still having trouble, please let us know what the exact issue is, including any error messages that you're receiving. It would also be helpful to know what version of Windows you're using.
Best,
Sara
[disucssion moved to Downloading, Installing, Setting Up forum]

Packing list - Driver Program and Layout set name for Smartform

Hi ,
Anybody knows about print program and Layout set name for PACKING LIST in Smartform.
Regards,
Kumar S

Hi Bhuvaneswari,
For Creating Adobe Interactive form, you need the below configuration:
Server side:
Server running on ABAP/Java stack configured with ADS
For ADS Configuration, follow the below link:
https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=0000894009&nlang=E
Client Side:
The required Reader version depends on your usage situation.
For SAP Interactive Forms by Adobe, we generally recommend the following:
Adobe Acrobat Version 7.0. 9 or higher
Adobe Reader Version 7.0.9 or higher
If you require forms for one of the scenarios listed below, you must use Reader 8.1.
These are:
Forms in Web Dynpro applications that are integrated at runtime using xACF (Active Components Framework) ZCI (Zero Client Installation).
Forms in scenarios that use digital signatures.
If you use interactive forms in Web Dynpro for Java and these interactive forms are included using ZCI (Zero Client Installation) at runtime, you must read Note 1055911. Note 1055911 specifies the required reader version and contains further detailed information.
Reward points if found helpful.
Regards,
Arafat

Volumes and Qtrees set up for SAP and Oracle

Hi Gurus
I Need your help Please
I need to get Volumes and Qtrees set up for SAP and Oracle.
I found a document from NetApp that helped a lot about the structure.
But what I donu2019t know and canu2019t find anywhere is sizing for the volumes and Qtrees.
I really need some guidelines on sizing these below:
FlexVol saplog
/usr/sap/SID
/usr/sap/trans
/sapmnt/SID
/home/SIDadm
/oracle/SID
/oracle/SID/origlogA
/oracle/SID/origlogB
/oracle/SID/oraarch
/oracle/SID/sapreorg
/oracle/SID/sapbackup
/oracle/SID/saparch
FlexVol sapdata
/oracle/SID/sapdata1
/oracle/SID/sapdata2
/oracle/SID/sapdataN
FlexVol mirrlogs
/oracle/SID/mirrlogA
/oracle/SID/mirrlogB
Thanks and appreciate your help

> I have gone through the Inst Guide and I was surprised to see only 50 MB for Oracle software directory ?
Where did you read that?
> The sizing given in Installation guide is for typical setup or do we need to size as per our requirement ?
The sizing give there is for the initial system setup. It does not contain customer specific requirements.
The usual process is:
- you contact your hardware vendor
- you use http://service.sap.com/quicksizer together with him and fill in the data
- the hardware vendor will offer you the storage and the machines for the setup
- the vendor configures with you the storage and the necessary filesystem layout based on that sizing
Each customers setup is different and requires the experience and knowledge from the respective hardware vendor how to set up the system so it performs well.
You can follow the suggestions given here, this will be enough for the initial setup but the system will grow. This is not taken into account in the installation guide because it's customer specific.
Markus

Need help startng websphere server in eclipse for debugging porpose

I am using Eclipse Sdk Version: 3.1.2
IBM websphere 6.0
JDK 1.4
I set debug value to "true" in my application.xml
I have a .ear file of my application deployed on the websphere appserver. Currently I can test my application in nobebug mode.
values of environment variables are -
JAVA_HOME - C:\DEV\IBMJDK142; C:\Program Files\Java\jre1.6.0_03
PATH - C:\DEV\IBMJDK142\bin; C:\Program Files\IBM\WebSphere MQ\Java\lib;C:\DEV\IBMJDK142\bin;%SystemRoot%\system32;%SystemRoot%;
I want to test the application in debug mode.
I am using default server on websphere, which is server1.
In Admin-console of webshere I went to
server-->Application server-->choose server1-->Debugging Service ---->checked the checkbox "Enable service at server startup"
Here value of my JVM debug port is 7777.
next In Eclipse env I chose Run---->Debug....--->Remote Java Application ----> created a new application with the name of my application and set the connection properties to -
Host - localhost
port-7777
Eclipse----> Windows----->Preferences---->Server----->Installed Runtime---->Add---->selected values such as -
JRE - default JRE(JDK 1.4)
IBM Websphere Installation Directory - C:/DEV/WebSphere/AppServer
saved it.
Now in debug perspective, I created a new server with selection/values such as -
IBM--->IBM Websphere v6---->
port - 9081
server profile directory - C:/DEV/WebSphere/AppServer/profiles/default
cell - GCWSNTRANode01Cell
node - GCWSNTRANode01
server - server1
Next---->Added the project to configured project ----->FINISH
Closed Eclipse to save env settings.
Started the default server (server1)
opened eclipse - desired project--->debug perspective ---->choose server--->Right Click----Start/Debug
mesg "Starting ServerI BM Websphere 6 - IBM Websphere 6 failed to start"
can some one please tell me what I am missing here.

Need help startng websphere server in eclipse for debugging porpose
can some one please tell me what I am missing here. Well for one, you're trying to debug a dolphin
Edited by: redfalconf35 on Jun 19, 2008 4:50 PM

I need help in finding a free update for my windows 7.5 mobile

I need help in finding a free update for my mobile 7.5 windows phone
Message was edited by: chevycamer427

http://www.windowsphone.com/en-us/store/app/adobe-reader/bc4f319a-9a9a-df11-a490-00237de2d b9e
[topic moved to Windows Phone subforum]

Need help Installing Flash player 10.3 for firefox. It stops at 50%

So I have Windows Vista Basic Home, I tried updating my Flash version in firefox because it was out of date, but everytime it start downloading it , then I get the a message that says "Error " Appliation in use." I uninstalled it and followed all the suggestions on the websites nothing is working. I even uninstall google chrome thinking it was the problem but I'm still having that problem so I really don't know what to do because now the only place Flash player is installed seems to be Google chrome that I had to redoawload, but everywhere else tells me that I need to install it.

RE-RE-RE REPITO, NO ENTIENDO NADA DE INGLES, PARA ESTE IDIOMA SOY COMPLETAMENTE NULA, POR FAVOR TODOS LOS MENSAJES, NOTAS, ECT., MANDEN EN ESPAÑOL.
Date: Thu, 29 Sep 2011 15:13:29 -0600
From: [email protected]
To: [email protected]
Subject: Need help Installing Flash player 10.3 for firefox. It stops at 50%
    Re: Need help Installing Flash player 10.3 for firefox. It stops at 50%
    created by Kpiebo in Installing Flash Player - View the full discussion
I have been at it since yesterday and it's still not working.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3945878#3945878
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3945878#3945878. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Installing Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I need help to find the serial number for Photoshop Elements 11

Hi! I need help to find the serial number for Photoshop Elements 11 I downloaded last year on Apple Application Store.. I have been using photoshop on mac for over a year and now need the serial number to be able to use it on macbook. I looked up Adobe's website for help but found none and noone to ask for support.. Any ideas how I can get the serial number using the App Sore bill I have?

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

MOVED: Needed Help Identifying and Properly Setting Voltages for OC Environment

Similar Messages

Maybe you are looking for