MOVED: Nforce3 and Vista, and ATI

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=114008.0

I was a bit to fast with my conclusion, downgrading xorg to 6.7 did the trick ( as for so many others)
I'm really loving this distribution so far. Great documentation...if you search long enough and read all the way down

Similar Messages

MOVED: K8NGM2 -FID, Vista and Cool n Quiet

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=107143.0

Quote
If you're ocing your system my advice to you is disable C&Q.
No OCing here.
Quote
What is your bios version?
Per initial post:
Quote
I've installed all latest available drivers/BIOS from MSI, nVidia, AMD, and Microsoft.
This includes 3.2 of BIOS.
At this point I'm leaning towards getting new (matched pair) Corsair RAM.
Thanks for suggestions.
Any other things I can check? Suggestions

Help CS2 and Vista

Hi,
I’ve been running CS2 on Vista for about 4 years on my laptop with no problems. Last weekend I got a Malware virus that had to be removed by McAfee. They made some changes to the Vista OS and also installed Service Pack 2 for Vista. Now CS2 won’t load- it asks me for an authorization code and asked that I activate by phone. The Adobe rep directed me to a support page on the Adobe website and to remove the .DAT files in the program licenses file. I tried this – no go. Also tried to run as administrator- no go.
When I looked thru my hard drive folders, I saw that I have adobe program licenses folders in TWO PLACES
C:\ProgramData\Adobe Systems\Product licenses
And
C:\Qoobox\Quarantine\C\ProgramData\Adobe Systems\Product licenses
I’m guessing here, but It seems like McAfee uninstalled CS2 and then reinstalled it and tried to protect my license in a quarantined folder. In any case, the files in each of the License folders are different. Should I try to move my “quarantined” files to their original folder? Would this be safe? Would this work?
Does anyone have any ideas or suggestions here? I didn’t get much help from Adobe on this. They said that CS2 is too old to give phone tech support. ( even though I bought Photoshop CS5 extended and Lightroom to run on my home computer 2 months ago)
I really would like to get this back because without reinstalling from disc. I have customized many CS2 programs, brushes, actions, printer settings etc, that would be lost if I reinstall and from other forums, It seems that a lot of people are having problems installing from disc to Vista.
Help!!!

My suggestion is to forget about CS2 and Vista and give serious thought to upgrading...NOW! CS2 is totally unsupported under Vista is the earliest version eligible for upgrade pricing. Why now? Because CS5.5 has already been announced and in the mean time you can get the CS2 to CS5 Design Premium upgrade for $768: http://amzn.to/ekY9fa. That will make you eligible for a free upgrade to CS5.5 when it ships in the next few weeks. http://kb2.adobe.com/cps/153/tn_15304.html
The CS2 to CS5.5 upgrade will cost about $200 more. By buying CS5 now you'll save that $200 and get a free upgrade as well as having a supported combination of software and operating system. You'll also keep yourself eligible for upgrade pricing for the foreseeable future.
Bob

Zen Micro and Vista? - Sol

I am trying to get my Zen Micro (DAP-MD0004) to work with Vista to no avail. It is loaded with the latest firmware (PlaysForSure - I dont think so!!!) and Vista picks it up and installs the driver no problem.However, if I try to view music through My Computer it doesnt show anything. Windows Media Player doesnt work either because its WMP. The sync windows just keeps saying to connect a device. I have installed Creative MediaSource 5 Organizer with plugin and even though it picks up my Zen, when I try to view my music it doesnt respond and I have to kill it.Has anybody got any advice for me I have already searched the forums for Zen Micro and Vista and I have found nothing to help me. Is Creative looking into the problem of people not being able to put music onto their devices

I have finally got it to work.Here is what I did for anyone that is having the same problem:
Boot the Zen to Recovery Mode (Remove battery, hold switch in on position, and insert battery)
Run a Clean Up
Run a Format
Reboot
Install Creative MediaSource 5 Organizer with PlaysForSure Plugin
Connect Zen Micro to computer and run MediaSource
You should now be able to copy music from your computer to your Zen.
I am disappointed that I couldn't copy my music off the device first but hey-ho.
I am also disappointed that the latest version of MediaSource requires you to purchase a pack to convert music to MP3.
It never fails to amaze me what businesses will do to try and get more money from us consumers.

Upgrading computer to Vista and Dual Core

I am planning to upgrade my computer to a dual core with Vista Home premium. This will entail a new hard drive with Vista and the reinstallation of all software. If I start to use LR now how do I save my library and images with related keywords so that they are useful when I re install LR
Thanks
Roger Lieberman

You'll be just fine, I have a dual boot setup (XP and Vista), and use the same library from both environments. Just remember that you have to use the same drive letter(s) for your image directories in both environments, unless you switch to using Vista permanently (in which case you can "reconnect" your image files, if the drive letters change)

Macbook Pro and ATI Graphics crashes in Windows Vista and 7

Hey all, I was wondering if anyone else had been having problems with Windows 7 and Vista having graphics driver crashes. I have been having this problem since the Boot Camp beta, and it has yet to be addressed as far as I can tell.
Basically the problem is that after a few minutes in either Vista or 7(after installing all the boot camp drivers from the Leopard or Snow Leopard disc) the screen graphics will start getting all corrupted. Eventually I will get a message in the taskbar telling me that the ATI driver has crashed and recovered from an error.
I have looked everywhere online I can think of for an answer, but have come up pretty empty thus far. The only thing I remember finding that was a possibility a long time ago was something to do with trying it with 1 stick of ram installed rather than 2, or that my ram could be problematic.
I tried running with just 1 stick, and that didn't help at all. I also tried each stick individually also with no change. I even went as far as running a diagnostic using some kind of memory testing software to see if the ram was bad, but it came back as good.
Also, I have run in XP without any issues whatsoever, so I am assuming it is something Vista and 7 specific. I was thinking it might have something to do with the Aero features as when I disable the ATI driver and run in Windows Basic without Aero enabled, I don't get the graphics glitches. Another clue might be that when the graphics glitch up, if I bring up the ctrlaltdel screen which gives you the option of Task Manager, Log Off, etc. the graphics are NOT glitched on that screen. As soon as you exit that screen however, the glitched screen is immediately back.
Bah, I am at pretty much the end of my sanity trying to figure this out, and was just wondering if anyone else has had this problem with the older MacBook Pro or is mine just inherently bad? Any help would be greatly appreciated.
Here is my system info just for extra help possibly?
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro1,2
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP12.0061.B03
SMC Version (system): 1.5f10
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
ROM Revision: 113-xxxxxx-086
EFI Driver Version: 01.00.086

Just an added update for anyone interested. I believe I have finally figured out what the issue is.
Apparently, at least on this model of MacBook, Apple has the ATI card underclocked to 310MHz / 278MHz (GPU and RAM respectively) when running normally. However, when running in Windows the ATI driver automatically uses the full clock speed of 470MHz / 470MHz (or something to that effect). The reason that it ends up getting artifacts and driver crashes is because of overheating. Apple has it underclocked because of the way heat is distributed in the system.
Anyway, I found a tool that KIND of works for fixing the issue I believe. It is called ATITool, and allows you to change the clock speed to the 310MHz / 278MHz that works so well in OS X.
It is located at: http://www.techpowerup.com/atitool/
One thing though, the newest version 0.27 beta 3 (on mine at least) causes the backlight of the screen to go off when you load it in Windows. If you put the machine into hibernate, then bring it back up it will come back on... but that is annoying. I have found that the version 0.25 beta 13 doesn't have this issue. It is possible some of the other versions prior to 0.27 beta 3 also don't have this issue, but I haven't tested them yet. I will give some of them a try later.
The previous versions can be found here: http://www.techpowerup.com/downloads/Tweaking/ATITool/
Anyway, if anyone else has luck with other clock speeds or knows of any other solutions please let me know. This way works, but I would like to find a better solution if possible.

MOVED: K9N2 Diamond , Vista 64 and AHCI/SATA configured DISK I/F

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=118524.0

Quote from: nyaradinorbert on 23-January-09, 16:39:22
My problem is that despite using the original disk, on a brand new install, the X-Fi card is not recognized: On win XP and Vista
1. It is seated correctly
2. I have tried re-booting with card in, and out and back in again
3. I have uninstalled and re-installed drivers multiple times
Can u help me ?
Quote from: nyaradinorbert on 24-January-09, 02:03:39
Tank you BOSSKILLER
It works

MOVED: [nVidia Series] Installing Windows Vista and drivers

This topic has been moved to Operating Systems.
[nVidia Series] Installing Windows Vista and drivers

hello welcome to the forums
do you mean that you have a windows xp that came as a part of a lenovo system?and you want to upgrade it to vista using vlite or your own customized vista installation right?i think you must be quite familiar in slipstreaming service packs into windows installation discs and ofcourse you can also include drivers and all stuff like wallpapers if you like!
if you have further quiries regarding slipstreaming service packs go through the link given below
http://www.winsupersite.com/showcase/xpsp3_slipstream.asp
if you are confortable with slipstreaming you will be able to slipstream lenovo's drivers into the iso image
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Whenever I truy to load a picture or video file, it will stall until I start moving the mouse around. When I stop moving the mouse, it stalls again. I am running Firefox 4.0.1 and Vista

Any picture or video file I try to load just stalls (with the exception of sound which works OK). I move the mouse and it plays or loads. I stop moving the mouse it stalls again.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

A problem with my ipod shuffle and vista

Hello all,
was wondering if anyone could offer some ideas on this. My flat mate just moved and I was using his mac for my ipod shuffle. I have just bought a Dell with windows vista and have put itunes on it. When I put my ipod in the USB port, vista says it does not recognised it and my ipod does not show up in the source area of itunes. I have tried to reformat it but the recomended program is incompatible with vista (it says only it works for XP).Is there any other way to reformat my ipod for vista? or is there a vista program available somewhere else.
many thanks Kim

Hi there.
I have similar problem with my ipod nano.
I recently bought a new PC with Vista, and for some strange reason, initially my ipod was recognised as I was able to transfer purchased music from my ipod to my itunes.
However now, a week or so later, every time I connect my ipod in the dock, it says "USB Device Not Recognised".
I have tried to restore my ipod software, but it wont let me do that, saying that it has a fault and needs to be replaced!
I initially thought it might be an ipod problem, but the store say it works fine, and restored (and wiped!) my ipod but it still doesnt work!
I connected a friend's ipod and the same thing happened.
So although I can listen to music in my itunes I cannot synchronise my ipod... what am I supposed to do?!
Its very frustrating... does anyone know the solution please please please!

Airport Extreme, Airdisk, and Vista - large file problem with a twist

Hi all,
I'm having a problem moving large-ish files to an external drive attached to my Airport Extreme SOMETIMES. Let me explain.
My system - Macbook Pro, 4gb ram, 10gb free HD space on macbook, running latest updates for mac and vista, external hard drive on AE is an internal WD in an enclosure w/ 25gb free (its formatted for pc, but I've used it directly connected to multiple computers, mac and pc, without fail), AE is using firmware 7.3.2, and im only allowing 802.11n. The problem occurs on the Vista side - havent checked the mac side yet.
The Good - I have bit torrents set up, using utorrent, to automatically copy files over to my airdisk once they've completed. This works flawlessly. If i connect the hard drive directly to my laptop (macbook running bootcamp w/ vista, all updates applied), large files copy over without a hitch as well.
The Bad - For the past couple weeks (could be longer, but I've just noticed it recently being a problem - is that a firmware problem clue?) If i download the files to my Vista desktop and copy them over manually, the copy just sits for a while and eventually fails with a "try again" error. If i try to copy any file over 300mb, the same error occurs.
What I've tried - well, not a lot. The first thing i did was to make sure my hard drive was error free, and worked when physically connected - it is and it did. I've read a few posts about formatting the drive for mac, but this really isnt a good option for me since all of my music is on this drive, and itunes pulls from it (which also works without a problem). I do however get the hang in itunes if i try to import large files (movies). I've also read about trying to go back to an earlier AE firmware, but the posts were outdated. I can try the mac side and see if large files move over, but again, i prefer to do this in windows vista.
this is my first post, so im sure im leaving out vital info. If anyone wants to take a stab at helping, I'd love to discuss. Thanks in advance.

Hello,
Just noticed the other day that I am having the same problem. I have two Vista machines attached to TC w/ a Western Digital 500 gig USB'd. I can write to the TC (any file size) with no problem, however I cannot write larger files to my attached WD drive. I can write smaller folders of music and such, but I cannot back up larger video files. Yet, if I directly attach the drive to my laptop I can copy over the files, no problem. I could not find any setting in the Airport Utility with regards to file size limits or anything of the like. Any help on this would be much appreciated.

P965 Platinum, Vista, and Raid

I spent a good couple of hours skimming the boards yesterday trying to set up my two new 320 SATAII hard drives in a RAID array. I ran into a ton of trouble, but then finally figured out part/all of my problem and got things working. I figure this information will be helpful for anyone who is trying to do the same. I'll post the most useful links I found at the end of this post as well...
heres what i'm working with:
MSI P965 Platinum
2gb OCZ DDR2 800MHZ 2 dimm kit
36.7 WD Raptor SATAII (as system drive)
Intel Core 2 Duo E6700
Sapphire X1650 PRO 512MB PCI-Express
Antec TruePower TRIO 650 650W Power Supply
promise technology ultra ata 133 tx2 (the source of a ton of trouble)
originally i had vista ultimate x64 installed on a 36.7 gb raptor that was performing ok (once i did the extremetech suggested reghacks for lowdiskspace and 8.3ntfsfilenames), but not as well as my friends new computer with a blazing fast 500 gb stripe.
my bios was configured as such:
on board raid controller: ide
on chip ata devices -> sata 1 config: enhanced
...configure sata 1 as: ide
...sata 2 configuration: enabled
i shut down the computer, and changed
on chip ata devices -> configure sata 1 as: raid
then i was able to get into the raid setup with Ctrl + I, and set up my array. Here's where I ran into my first problem. I figured I wanted a raid 0 because I don't care soooo much about my data being lost, and i have never had a hard drive die on me (knock on wood) in the past 8 years (guardian angel). So setting up my array was working fine, except for i hadn't anticipated that i would have to choose an ideal strip size. The board suggests 128k, but after much deliberation I decided since I wanted the speed benefit for my OS and programs, I wanted 32k strip size; but having a 640 stripe for just the OS and programs seems huge, so out of curiosity I tried setting up two raid arrays (both across the same drives). The first was a 100gb raid 0 with a 32k strip size and the second was a 496.2 raid 0 with a 128k strip size. This worked fine, but then I got to thinking... can I set up the 100 gb array as a mirror? If so, then I get the best of both worlds since I can secure all my OS/settings/programs/documents, but I'll have a super fast (respectively) 400 gb drive for ephemeral memory and expendable data (replaceable stuff like ripped dvds, downloaded music and programs, downloaded anything...). This would all be at the expense of 100 gb which certainly seems worth it at this case because I wouldn't have to worry about the possibility of losing all my data like everyone seems to cry about all over the internet when talking about raid stripes. So i set it up, this worked fine... next step boot into vist ultimate and start installation.
Here proved my most annoying step, as my first problem occurred when I couldn't find the dvd/cd drive in the boot sequence menu. I saw the usb card reader drives, my raid arrays, and my raptor... but no dvd/cd drive (of which I had two connected). After scouring the web about that darned Jmicron chip, it appeared as if the bios cannot see the PATA drives on this board and I would have to try pressing F8 at the jmicron bios screen. THIS IS COMPLETE MISINFORMATION.
As stupid as it is, the real problem is that the boot sequence only displays 6 (i think it's 6) bootable media, and if you have anything else it just doesn't show it. This gave me the impression that the bios was unaware of my cd/dvd drives connected to the IDE controller. As soon as I unplugged my card reader, the dvd/cd drives appeared in the boot sequence... thank gawd because...
i had tried plugging my dvd/cd drives into the promise ata controller (which i already know lacks a vista 64bit compatible driver), which actually allowed me to boot into the vista setup whereupon I was asked (I did NOT have to press F6, even though everyone seems to think they have to) to install the driver for the dvd/cd controller (I assumed and was right that it was asking for the promise ata controller driver). I put the most recent drivers from their website on a usb stick, plugged it in, and the driver worked and then setup was able to see my dvd/cd drives (which is weird because how did I get to that point if it couldn't?).
Then setup said it couldn't find any drives, so I figured the problem was with the driver for the ICH8R intel raid controller. I downloaded drivers from MSI's website, intel's, and a bunch of others, and NONE of them worked. Setup would install the drivers, but it still could not see any hard drives attached to it. I'm not sure what caused this problem, but my best guess is that it had to do with the promise card being plugged in.
I gave up on that and figured I'd try something else, maybe the promise card was causing the problem. So I tried changing the ports that all my sata drives are plugged into. The two new 320's were on 0 and 2, and I also had a drive on 3 4 and 5. I read somewhere that intel had some array issues on 0 1 and 2, so I tried setting my 320's on 4 and 5 and moved my other drives around it. This is also when I had the idea to remove my card reader and pull out the ultra ata 133 tx2 card.
I was able then to see the dvd/cdrom in the boot sequence, put it first, and boot into vista setup. VISTA ULTIMATE DID NOT ASK ME FOR ANY DRIVERS AT THIS POINT. I'm not sure if it was the sata ports I had my drives plugged into or not, but at this point vista setup saw all my drives and I chose the 100 gb array and installation went smoothly.
Excellent… now I just have to install photoshop and see if it loads in 4 seconds like on my friends new computer with the stripe. If not, then I'll probably just cry.
Hopefully I've covered enough of the keywords in this description that anyone who has this problem will easily find this page. Remember:
JMICRON IDE DEVICES CAN BE SEEN BY THE BIOS
VISTA SETUP DOES NOT NEED ANY ADDITIONAL DRIVERS TO INTERACT WITH THE RAID CONTROLLER
SORRY IF THIS WAS A TON OF INFORMATION BUT AFTER ALL THE TIME I SPENT TRYING TO FIGURE THIS OUT I FEEL LIKE NO ONE HAD POSTED A FULL BLOWN SOLUTION
Hope this was helpful

I have the very same issue except two things. When I try to see why it will not load the Array I find that the first drive (Maxtor 6V160E0) is red and considered to be bad. Did you happen to notice if your system showed the same thing?
I have moved the drives around and it still corrupts the Maxtor 6V160E0. I have not tried to move them to the end of the SATA connections. I will try that and see what happens.
Other thing was the JMicron would see my NEC DVDRW, but thought it was a ACSI and it would only read at 12X. It even stated that in the OS. I then was told by the Techs that they have not had alot of luck with NEC drives. So, I purchased a LiteOn SATA II DVDRW, connected it to the JMicron SATA connector and it came alive. I then found it to turn out worthless DVD's and CD's. Not even that Drive would read them after burning. I got so ticked about the JMicron I just shut it off in the BIOS. I hooked up the drive to the #4 port and whala, no more problems with burn. Now it reads, writes, and re-writes at the stated speeds (also I needed to update the firmware twice since I purchase the drive. The MS updates did something to it and the new firmware fixed it.). I have never been able to get a drive to work correctly on the JMicron no matter who made it.
I sure hope that MSI has scraped any board that will ever use that controller. JMircon is not my friend!
I am going to get 2 more SATA II drives and try this without having to backup all my data.

Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
MSI P-35 Platinum
Q6600 Core 2 Quad
Presently XP 32Bit
NVidia geforce 8600GT
8GB DDR2 SDRAM PC6400-800MHz
Windows 7..waiting to be installed.
Hello,
I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista. Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers? When do i install these drivers....before the OS install, or after?
Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?
Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.? People tell me that there is a chance of the OS installing sometimes on the other drives.
Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
Thx

I've never had this much trouble hooking up a HDD.
I have two IDE DVD/CD ROMS. (My RAID MODE was IDE in XP OS, and still is with WIN7.)
I have three SATA HDD's.
After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor. Seems no matter what I change in the boot sequence,it never wants to boot properly
....AND THEN,
I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy. Win. Explorer also listed them in that folder, in device manager, it listed all three too.
The managed window showed this:
74GB (system,active,Primary partition) Storage
2TB (Primary partition) Excessive Storage
500GB (Boot, page files,crash-Dump, Primary partition) Operating system
Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
Before I just got online, I tried RESTART, and it opened Windows the usual way, so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS. Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE. My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.
So what is the preferred boot sequence?

Boot Camp, Vista and Mac Pro X1900XT

Hey all,
I'm experceing what appears to be a common problem with the Mac Pro with X1900XT option and Boot Camp.
Vista installs file and everything is recognized except for the Radeo X1900XT card. When I boot up, I get what appears to be 16-colors displayed. When I tried to use my Boot Camp driver disk, everything installs fine except for the Radeon card.
I've also tried downloading and installing Windows Vista Catalyst drivers from ATI.com (version 7.3 as the release notes mentioned HDMI is supported by that version) and still the same problem and now my Vista crashes constantly before I log in.
Has anyone experienced? Suggestions or a workaround?
P.S - I also own a black macbook and the same copy of Vista worked flawlessly on it, even with Aero effects turned on.

The Mac Pro needs 4 FB-DIMMS minimum.
While this Mac Pro I own is the most capable, flexible and enjoyable machine I have ever owned, who says it will run circles around your friend's custom built? I suspect for many/most tasks you would be correct. Except for 3D simulation. PC video cards have higher performance clocks and drivers.
After using my MP 2.66 for 6 weeks as a PC and a Mac I have concluded:
This is a Mac, and should be used to run Mac OS (the real reason to buy a Mac). While it's great to be able to run XP and Vista on a Mac, for general purpose apps usage (geek nirvana), if high performance video cards are critical get a PC.
The Macs strength, is the dividends returned by it's tight integration as a platform. For example, I popped in a second video card and it just worked. No half dozen pop-ups telling me about new hardware and all that blather.
Once I get this sling off of my arm, I will be building a PC for heavy duty simulation.

Boot Camp and Vista SP1

Hi. I have a Macbook Pro running Leopard and Vista. Is it safe to install Vista SP1 in Boot Camp 2.0? I haven't heard of too many issues, but just making sure it wasn't going to break anything. Thanks.

I'm having the exact issues as webcat, but I'm on an iMac 2.8 (early 2008) ATI video & 4GB using 10.5.4/5.
The BC util worked fine through partitioning (32GB) and Vista-SP1 (Ultimate) install, and the the OS-X CD-1 driver update - but once in Vista the stated symptoms showed up. I had initially ran Windows Update, but no Vista Ultimate updates were found. There was also an attempt to run some Apple software update but the pop-up went away before I had a chance to read it.
I have down loaded the BCUpdateVista32.exe and tried to run that (GUI) a few times, but it always fails with the "Boot Camp UI transform Update has stopped working" error - faulting module listed as ntdll.dll 6.0.6001.18000.
So, where to now is my question? I have seen some hope from the Cmd-Line 'softwareupdate' method, or I can run through the registry and 'purge/change' as deemed needed. The confounding thing is that the BC 2.1 update is a Windows EXE, so I need to work in that environment to get it installed, and I had presumed that with my updated 10.5.4/5 before I started, that BC would have been at the v2.1 level.
It seems I may yet need to burn a CD of drivers and and update the supplied OS-X drivers with the BC 2.1 items - is this possible?
Thanks for any help and direction with this.
GrayGuy

MOVED: Nforce3 and Vista, and ATI

Similar Messages

Maybe you are looking for