MOVED: Onboard graphic card simultaneous with PCI Express graphic card

This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=161634.0

Hi,
The following link shows the specs of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03499587#N432
It clearly says:
*Integrated video is not available if a graphics card is installed.
Supports PCI Express x16 graphics cards.
Either integrated graphics or the PCI Express x16 slot are usable at one time; they are not usable concurrently.
You don't need to disable the integrated video chip (or onboard video).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I have a late 2008 unibody Macbook Pro with PCI express slot.

I have a late 2008 unibody Macbook Pro with PCI express slot, running MAC os 10.6.8 . also I have a Sonnet Tempo Sata Express card plugged in. but only one port works at about 100/mbs with an external HDD. 2nd port wont work, anyone can explain? thank you for your help!
(Ps: the port at the bottom of the express card works, one on top doesnt)

AirPlay Mirroring is compatible with OS X Mountain Lion > http://support.apple.com/kb/HT5404 Make a backup, open App Store and purchase OS X Mountain Lion

Probleme with PCI Express Root Complex

I bought an hp 15t - j100 with Windows 8.1 but on windows 8.1 but i needed change to windows 8 and now i have a problem with PCI Express Root Complex code 28. The drives i have donwload for hp site http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
I need help to solve that problem
thanks
and i waiting for help
This question was solved.
View Solution.

Hi:
You need this driver...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&dlc=en&lc=en...

Does the Digi@nywhere A/D Plus work with PCI Express ?

Hi guys!
I am planning to purchase a Digi@nywhere A/D Plus for my PC,
but all PCI slots on my K9N Diamond mainboard are already busy,
only the second PCI Express slot which can be used for a second
graphic card in SLI mode (my mainboard uses nForce 590 SLI chipset)
is free to use.
Can the Digi@nywhere A/D Plus work with my PCI Express slot,
which is primarily intended to be used for a second graphic card in SLI mode,
or not ?

you cannot put a pci device in a pcie slot

ExpressCard/34 compatible with PCI Express 1 lane?

Hello everyone,
I am looking into purchasing this item, however I am confused about the differences and compatibilities between the ExpressCard/34 slot my MBP has and a PCI Express. The device I am looking into purchasing is compatible with 1, 4, 8, 16 lane PCIe slots. Is this item compatible with my MBP?
Here is the link to the item:
http://www.blackmagic-design.com/products/intensity/techspecs/
It is the Intensity Pro.
Anyways, thanks for the help.

Hi e,
The Intensity Pro card in question is an internal PCI card and isn't going to fit in an EC/34 slot. It's built for a Mac Pro, not a MacBook Pro (so a discussion on PCI slots would be academic at best). The Shuttle is Windows only, and needs a built in USB 3 port (no such Mac exists). So you'll need to find an external device which uses one of the host interfaces available on the MBP (FW, USB2). Good luck on your search, and it you find something promising, I hope you'll post back with info.

Need a faster GPU for powermac G5 QuadCore with PCI Express

Greez,
i want to expanding my G5 QuadCore (PCI Express) with a Geforce 7800GT or GTX
have someone an experiance with this videocards ?
and is the new 7900 GT compatibel ?
I need a fast GPU for animation, but the GeForce Quatro 4500 is much expensive !
Thanks from Germany TiMovie

Reginald,
Welcome and you choose well, except in your video card. The 6600 is hopeless in Aperture if your running a medium-large library.
Apple seems to run a monopoly on the video card side. Each card needs Apple specific firmware on it to work. So no PC cards don't work without modifications. Speaking of which some people apparently figured this out. Check this and the Aperture forums for more detail of a possible 3rd party option.

SoundFX suddenly not working with PCI-Express SB Titanium and Windows 7 HP 64

Hi guys,
I bought myself a PCI-Express Sounblaster Titanium bulk last friday.
I downloaded some drivers (sorry, I have no idea what Version?) and an Update to the latest official Version (2.7.0007). When I first tried tu use VoiceFX it worked and I was astonished. Its seemed a real cool gimmick.
Strangely, when I tried it again the next day the VoiceFX buttons where still there under the Audio Config thingie, but my voice did not change anymore when I chose for ex. Robot or Ork. It did not matter what I chose, my voice always stayed normal.
Since then I've deen doing nothing else than to deinstall, reinstall drivers, deleting driver traces, trying again. My worst case was that the VoiceFX did not show at all anymore, my best case was as described above.
I even treid the new beta Drivers.
Does anyone have a solution?
If not, can anyone tell me what dependancies VoiceFX has? Is it enough to install only the drivers or does it need something else as well?
With which Driver Version does it definitely work under Win 7 64?
Oh yeah, I have I microphone which I can switch to Mono or Stereo, does it only work with one of the two? Mine was mostly in Stereo mode. (It comes from a company (dunno which one) thats got nothing to do with computers, games or creative, it's one of those Microphones you connect to your tie).
Thanks@all

Weird... I changed nothing and yeterday it worked...
I just understand this, but what the hell?

AGPGART with pci express

Ok, I was wondering if I can prevent agpgart from loading on my machine because I don't have agp. I use a PCI express card and from what I understand it doesn't need agpgart. Yet, when I load up KDE, there is agpgart in lsmod.
How can I dissable this, or is it even necessary?
Thanks!!!
Joe

Snowman wrote:If you use hwdetect, add agpgart to MOD_BLACKLIST
Otherwise, tell us how you load your modules or post your rc.conf.
Yeah, I just use hwdetect. So, I will add that to the blacklist and see what happens...
Thanks man!!!
Joe

Cannot use DSL for wireless & phone simultaneously with Airport Express

Hello, I've just moved and switched to DSL from cable modem.
SBC DSL
One phone jack with the supplied filter on it allowing connection to the phone and supplied wired router
They provided a CD that configured the connection for me. In their ethernet connection it is not PPOE. Just DHCP. When I connect the laptop directly to the router via ethernet, I am able to surf and talk on the phone. When i connect the router to the Airport express and connect wirelessly, I can use either the phone or the internet. When I make a phone call the wireless drops.
Does anyone have any idea as to why this happens?
Thanks,
Neobe

It's a 2.4 GHz phone
This is likely your problem.
2.4GHz phones are notorious for interfering with WiFi networks, as they share the same frequency range.
This is a very common problem.
I would suggest switching to a 900Mhz, or a 5.8GHz cordless phone.

Need help with PCI Express X-Fi Xtreme Audio - Vista

Hi, bought this card pci exprss x-fi xtreme audio and installed, had a lot of problems in vista 64. Using a logitech z5500 5. soundsystem and first tried using the optical spdif to get DTS etc working but to no joy... Started using the 3.5 kables but nothing there either. And I cant find options to set the treble and base? the sound is really medioker as it is now.
Using the latest drivers for the card issued in may 08, latest alchemy and console files. what to do?
Dave?

To Collipa and Dudeface:
If you installed the support pack for the card but still have driver problems, have you used windowsudpate under Windows 7? Creative submitted a basic driver for the card that shows up in driver options under Windows Update. If you can let Windows Update install that driver, then you can update AFTER rebooting with the new one.
If that windowsupdate did not work, try this:
Download the newest driver for your card. Then, if you already have winace, winzip, winrar or even the free 7Zip, then you can right click that Creative executable file and then choose to........extract to......and do so to a temporary folder on your desktop or say, c:\Creative driver.
Then go to device manager and sound video and game controllers, and to your problem sound card, click driver, and update driver and browse my computer for software, and "let me pick"? and "have disk" and then browse to.......
C:\Creative driver\Install\wdm
Whereever you downlaoded the file to, the important directory is the INSTALL\WDM and choose OK and it should show Creative X-FI. Let it copy files, and it does take awhile, and then reboot and see if your sound card works.
here is the newest driver for your card:
http://ccftp.creative.com/manualdn/Drivers/AVP/0963/0xF7C73FBB/XFXA_PCDRV_LB__04_0090.exe

Linking SCSI baed flat-bed scanner to new Mac Pro with PCI-Express

I need information on how to link my current scanner (Microtek Scanmaker 4) with a recently ordered Mac Pro. It is a SCSI based peripheral, and the only (last) of my currently owned peripherals that I'll need after getting my new Mac Pro. I've been searching the internet for a modestly priced interface board that would serve me.
I've invested several hundred dollars in the hardware and SilverFast software, and would prefer to use the old scanner rather than move to a newer USB or Firewire based scanner.
I'd appreciate any leads. Does Apple have advice? So far I've not found any discussions that face the issue, but perhaps I've missed a dark corner of the support search domains.
Thanks in advance, Carl
Mac Pro, G4 desktop, Ti-Powerbook Mac OS X (10.4.7)
Mac Pro Mac OS X (10.4.7)
Mac OS X (10.4.7)

Thanks Michael:
My dilemma is that a high end scanner for photographic images (up to 3900 lpi) and firewire/USB 2.0 compatible costs about $600. The card you suggest was priced at about $400.
If push comes to shove I guess I'll opt for a new scanner, and face the problem of firewire/USB obselence when it comes.
A local resource suggested that the only reason we even worry about the availability of SCSI devices is that they are needed to interface with multi-thousand dollar scientific instruments.
I was hoping to find a more modestly priced card, and thank you for the lead. It's a start!
Carl
Mac Pro Mac OS X (10.4.7)
Mac Pro Mac OS X (10.4.7)

How do I determine whether I have PCI Express v1.1 or v2.0?

This article in Mac Fixit states that computers with PCI Express v1.1 slots will NOT be able to take full advantage of OpenCL in Snow Leopard:
http://www.macfixit.com/article.php?story=20090612121357227
... In terms of PCI Express, My Mac Pro is on the cusp. PCI 2.0 was announced in January 2007 and presumably made it's way onto the assembly line a few months after that. I bought my refurbished Mac Pro in June 2007. I can't determine in the System Profiler if I have PCIv1.1 or v2.0. Does anyone know how to find out? MacTracker and machistory.com haven't answered the question. It seems some of the MacPro1,1 models shipped with v1.1 and some with v2.0. How do I determine what I have? Thanks for your help!
SPECS FROM MY SYSTEM PROFILER (SERIAL RM727......)
GRAPHICS/DISPLAYS
NVIDIA GeForce 7300 GT
Chipset Model: NVIDIA GeForce 7300 GT
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0393
Revision ID: 0x00a1
ROM Revision: 3008
PCI CARDS
NVIDIA GeForce 7300 GT
Name: NVDA,Display-B
Type: display
Bus: PCI
Slot: Slot-1
Vendor ID: 0x10de
Device ID: 0x0393
Subsystem Vendor ID: 0x0000
Subsystem ID: 0x0010
ROM Revision: 3008
Revision ID: 0x00a1
Link Width: x16

How do I determine whether I have PCI Express v1.1 or v2.0?
Hi,
Open Apple System Profiler (About this Mac:More info) and look at the Hardware: Model Identifier. If it says Mac Pro 1,1 or Mac Pro 2,1 you have PCIe v1.1 slots.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro/
If it says Mac Pro 3,1 you have PCIe v1.1 in slots 3 and 4 and PCIe v2.0 in slots 1 and 2.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2008/
If it says Mac Pro 4,1 you have PCIe v2.0 in all four slots.
http://www.amug.org/amug-web/html/amug/reviews/articles/intel/macpro-2009/
Hope that helps!

Maybe too much for me sli/plat neo 4 no pst with pci e

My stats are in my sig. Maybe too much for me but I been fighting for 3 weeks and 2 days. Whenever my winfast is in pci-e it throws memory error. Take it out and throw in a 8mb pci card into another slot works fine. I have tried diffrent powersupplies and memory. Was told the board was ok but did not see it for myself. Did see the card work . I have removed from case and sli switch checked , backplate coolers, I even did a cartwheel still no post with pci-express. Any ideas
this is on a winchester 3500 +

Then do the following: enter in BIOS and press Shift+F2 and after Alt+F3 then go to the Cell Menu and you will see one option called NV/ATI SpeedUp set it to disable save the BIOS and shutdown remove the PCI card and put your PCI-E card in and start the comp, see if it starts.
If not then you have an incompatible PCI-E card, if you are sure that the card is not faulty.
Be well....

MSI 6600 pci express driver issue

Evening/Morning all.
Not sure if this would be considered a commen problem or just my luck?
Did the build last week of my current rig (details in sig) and am pleased with how well things are preforming. However I would like to know if anyone else has had issues with installing the nVidia drivers from the CD that comes included with the video card?
Basically I installed the motherboard drivers in order, made sure that was all nice and happy I inserted the MSI driver CD for the video card, the autorun kicked in with the "selection" screen. Went and clicked on the "install nVidia display drivers" bit of fun...and got Nadda thing. It sat there like a very pretty rock. I had to install the drivers the ol' fashion way via the system's hardware manager. Once done it still was'ent right, so I had to D/L the updated drivers from MSI...Un-install the video drivers I just put on...(real nightmare...it also removed several other drivers...as well as the display drivers..done via "add/remove" programs.)
Long story short (I know..to late) I had to re-install all the motherboard drivers AGAIN...and then did the setup of the D/L drivers from MSI. This time it seems to be working.. (have several other issues as well...but this one really was 'odd')
Is this something that happens from time to time? Meaning the CD flat out does'ent install when you click on the 'install' option???
I'd like to think it's the CD...but I also wonder if I missed something along the way. (other problems will be addressed in their proper area)
All Best
S-

This might be the best route. While I've normally have used the drivers from the motherboard makers websites? This is the first amd64 939 board I've had the unique pleasure to work with. The only thing that was a slight letdown was the benchmark.. 3Dmark 03. It only did slightly better then my other computer which my G/F is now using (amd2500+barton, Soyo KT600 ultra plat.)
This is my first run with PCI Express, so I'm still learning all of it's little 'quirks'. Such as trying to update the display drivers..and accidently nuking out the motherboard drivers at the same time. (Oppps)
6.6.9.3 seems to be the latest driver pack..and that's the one MSI listed. I'll keep my eyes open for any updates. When making a choice for updateing the drivers. Should I only use the ones that list PCI Express? I've noted a new(er) version on the MSI site but it did'nt mention PCI Express at all..So I went with the 6693 as it listed support for it.
Thanks!
S-

MSI 945GM3 with PCI-e graphics card

I have a 945GM3 motherboard and am trying to put a EN8600GT video card on it (dual monitor/PCI Express). When I install the video card I get no video output from the card or the motherboard video controller. The system still boots as I can shut down windows from the keyboard and the system powers off. But I can't see anything. Same result if I disable the motherboard video in the BIOS. On page 3-10 of the manual it shows the Advanced Chipset Setup which has a selection for setting which graphics card to initialize first, but I don't have that entry in my BIOS settings (only the other two selections on the page). I have upgraded to v5.60 of the BIOS and that has not helped either. Unfortunately I don't have another motherboard to test the graphics card on, but before I return it I'd like to be sure that is the problem.
Thank you.

Clearing CMOS and powering with the monitor plugged into the PCI-e card did make that card appear. And both outputs on the EN8600 now work. But at that point I don't seem to be able to access the built-in display adapter. If I take the EN8600 card out, the motherboard video controller reappears, but it disappears as soon as the EN8600 card is plugged in. Is this a limitation of the motherboard?
Thanks for the help.
Glen

MOVED: Onboard graphic card simultaneous with PCI Express graphic card

Similar Messages

Maybe you are looking for