MOVED: P7N Diamond Black screen until windows loads

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=130890.0

Quote
I plugged it into the other slot on the video card and it works fine now.
It should work in all slots. Which slot did you have it in before?

Similar Messages

P7N Diamond Black screen until windows loads

Ok so when I first built this PC I would turn it on and would show all of the usual screens that you would expect and all was good. However a few months ago I got a virus or two and for no apparent reason when I turn on the computer now I get a completely black screen in which the monitor won't even register any sort of output, this only lasts until windows has loaded though and then the login screen pops up. I've been ignoring this until now because I haven't needed to go into the BIOS, but I feel it's time to reformat and I can't change the boot sequence or anything. I've already tried removing the battery to no avail, and I have no idea what else to do.
My setup consists of the p7n780iSLI, q660, 4 gigs of mushkin ram, and a 9800gx2 I'm also running windows XP
I have no reason to believe any of the other hardware is to blame though since everything runs as well as it should after I'm logged in.

Quote
I plugged it into the other slot on the video card and it works fine now.
It should work in all slots. Which slot did you have it in before?

GTX670 - Signal lost/black screen after windows loading icon

Hello,
I hope I am posting this in the correct forum area. If not I do apologize.
Here are my specs:
Board: MSI Z97-G45 Gaming
Bios: ?? whatever pre-installed on mobo
VGA: MSI GTX670 OC
PSU: Corsair HX750 750W
Intel Core i7-4790K
MEM: 12 GB Kingston HyperX DDR3 1600 2x 4GB, 2x 2GB sticks
HDD: SSD Kingston 120 GB (Win7), HDD 1 TB WD 7200 RPM (Win7), HDD 1.5 TB WD 7200 RPM (storage)
COOLER: Corsair Hydro Series H60 Water Cooler
OC: no overclocking done by me..default settings
OS: Windows 7 64bit Professional
So to keep this as direct and as short as humanly possible here is my situation.
Had a gtx670 card that I had to send back to MSI under RMA. They sent me what looks like a new gtx670 card (no dust) that I received yesterday (4 Aug). Last night I removed temporary old card (9800gt) and plugged in new 670gtx. Things seemed to be ok, reinstalled driver after card was recognized. Played one round of Battlefield 4 for testing purposes and all seemed good.
Upon exiting the game things went south in a hurry. Moving the mouse cursor around was extremely slow and choppy. Mouse clicks were not recognized. I could not bring up ctrl-alt-del to get to task manager. At this point the cursor turned to spinning circle as if things were happening. However, after 5+ minutes of nothing changing I did a hard boot.
Restarted and after the windows loading screen the signal appeared to be lost to the monitor and I was left with black screen. This was with the SSD. I then attempted to load into the HDD windows OS that I hadn't logged into yet with this card and was greeted with the same issue.
I can load into Safe Mode with no issues. In safe mode I removed all nvidia drivers and was then able to load into windows normally using basic windows vga drivers. The moment I load the Nvidia drivers and restart the computer I then have the issue again. This happens with both drives.
I have reset the video card in the PCI-Ex16 slot and still received the problem. I have tried a different PCI-Ex16 slot and still had the issue. I put the old 9800gt card back in and windows loaded perfectly and without issues on both drives. I put the 670gt in and try to load into normal windows and I lose signal and get black screen after the windows loading screen.
I'm at a loss at the moment. I think it's the drivers, but could it be the card?
Doing some research I've come across some people saying there may be issues with the nvidia HD audio drivers that are installed with the video drivers. Could it be as simple as uninstalling or unchecking that particular driver?

Flashed the BIOS last night to the latest version and attempted to launch windows with the GTX670 card. I still experienced the same issue where as soon as windows finishes it's loading animation (with Nvidia drivers) and it goes to the login screen, the monitors cut out.
At this point I feel like it has to be the card. The moment I install the video drivers and restart, I have the problem of losing the signal/black screen.
What I have done:
1) Completely wiped any/all video related drivers from the computer and started from scratch. No success.
2) Ran Memtestx86 to see if it's a problem with my memory sticks. No problems found.
3) Put the card in a different PCI-Ex16 slot to see if there was a problem with the slot. No success.
4) Flash updated the BIOS on the motherboard to the latest version. No success.
I have a dual boot computer with Windows 7 64-bit installed on an SSD and a HDD. The problem happens on both drives. Yet, the moment I install my old 9800GT the problem disappears and I can login to Windows just fine.
I will be sending the card back today on another RMA.

Satellite A100: Black screen until windows starts

Hello everybody,
my screen shows nothing until windows XP starts. No toshiba start-screen, no boot menue. The rest runs problemfree, no errors. I would like to have the normal boot with: "press del to enter setup" etc.
Thanks for helping

Hi
Something like press del to enter setup will not appear because usually at the beginning only the Toshiba splash screen should appear.
If you want to enter the BIOS you have to press the F2. By pressing the DEL you will not enter the BIOS. Its a notebook and not a desktop PC, buddy ;)
What you can do is to disable the Quiet Boot in the BIOS. Then diagnostic enabled and summary screen is displayed.

My ipod has a black screen with a loading symbol (its moving) i cant turn it off or plug it into itunes its been like this for about 3.5 hours. i need help!!!

my ipod has a black screen with a loading symbol (its moving) i cant turn it off or plug it into itunes its been like this for about 3.5 hours. i tried to do a system reset it after a glitched download. but while it was reseting it got stuck ot a black loading screen.
                                                                                           PLEASE HELP ME !!!!!!!!

The article helped me a bit but it doesnt help me totally because the buttons dont work and i cannot connect to itunes (itunes does not sense my ipod when plugged in) so im thinking to just let the battery uncharge...
                                                             but when it went down i was fully charged
                                                                              (im very unpatient)

Help MacBook Pro 13" early 2011 suddenly black screen in Windows 7 SP1. EFI 2.2.

Hi, everyone, I need help here.
Apple MacBook Pro 13" early 2011 preinstall Lion version, EFI 2.2, Boot Camp 4.0. suddenly black screen in Windows 7 SP1 (black screen and also no sound at all, need to press power button to off). What happen?? Please someone tell me what to do?
I have delete bootcamp HD and reinstall windows 7 but the problem is still here, I have reset PRAM and SMC too.
The video on the black screen: (http://www.youtube.com/watch?v=z3dLTFSD-v8)

Oh I actually have the problem in Mac OS, not even using the Bootcamp or Windows 7
Csound1 wrote:
lokiman wrote:
I am having the exact same problem with my 13" early 2011 Macbook Pro. I have 10.6.8. I used the disk that came with the laptop to restore the OS to 10.6.7 but the problem existed there too. I have now updated it back to 10.6.8. The problem still exists. This doesn't seem to be limited to an OS version and seems like an issue with device driver or with hardware. I will try to take it to the Apple store and see if this gets resolved.
You too have a black screen in Windows 7. ?

Black Screen Installing Windows 7 with Bootcamp

I know it sounds like a known problem, but if tried alot of solutions i found on internet but noting worked yet.
Here is some information:
Mac Mini mid 2011 (2.7 GHz)
I've installed windows before, but I have added a second SSD. al workes fine.
Installed OS X with a backup on de new SSD. Tried to start Windows with Parallels, but it couldn't find it anymore.
No problem I thought just format the old hdd and reinstall windows.
Now this is what happens:
I start bootcamp. let it make a usb drive with an windows iso and the support software.
Now I create a partition on the hdd (150GB should do it).
Mac restarts. I hear the startup tune. A short white screen.
But then a black screen. no windows logo, or whatelse.
I tried reseting NVRAM.
I found a lot of sites telling me to delete some files, but that is very difficult when there are no files.
I tried a lot of restarts and selecting the booting device. And just waiting for a few hours, but the screen stays black.
I even tried a partition on the SSD and using the whole hdd.
So what is the problem? I'm out of idea's.

Another thing I forgot to mention was that when I had windows, installed and running and had black screen issue on rebooting, I used to verify and repair my permissions using disk utility. All my permissions would get fixed and windows would boot up fine. But however when trying to do a clean install of Windows 7 over the past few days, all but one permission does not get fixed. Apple's support site says it can be safely ignored. But I feel this could be causing my problem. Here is the error from disk utility:
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

HT3986 i get a black screen during windows 7 installation on bootcamp 5.0.1

i get a black screen during windows 7 installation on bootcamp 5.0.1 , it wont install

Hi wb2009,
I haven't found that the TV would be an issue, but did find an article that states to not have extra USB devices connected.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
The Windows installation may boot to a black screen with a blinking cursor. This can occur if you use a USB optical drive or USB Flash drive for the Windows installation and another USB device is also connected to the computer.
There's another article that mentions Windows XP or Vista that may apply.
Archived - Boot Camp: Start up to black screen after installing Windows
http://support.apple.com/kb/TS2600
Thank you for visiting Apple Support Communities.
Nubz

Black screen during windows 7 install on 27inch iMac

My iMac turns to a black screen during windows 7 boot camp install. I can use the install disk on my wifes Macbook Pro so I know that the media is good.

Please re-post in the Boot Camp forum.

BLACK SCREEN stating "windows could not start because the following is miss

I installed Bootcamp update 2.1 and then XP SP3.
Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
I tried to use the option key and insert the Windows CD but it won't start up.
Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.

Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I just force powered off & booted into Mac.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
Sure is annoying,
Good luck!

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iPhone without iTunes an now i don't wad then it turned itf off and now its stuck on the black screen with the loading sign. So please how can i turn my phone on again

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?

I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

The MAC OSX v10.4 just comes up with the grey apple which alternates with ?. Tried pressing "apple key" S. Black screen appears Error Loading Drivers. No discs. Any ideas?

My son has been deleting files. Now when he turns on the MAC OSX v10.4 it just comes up with the grey apple keywhich alternates with a NO ENTRY symbo and ? symbol. Tried pressing "apple key" S. Black screen appears Error Loading Drivers.
We have no discs. Any ideas?

You should have given your son access to a Parental Controlled Account only. Unfortunately without the disks, and from the sounds of it, no backup, you are stuck. You might be able to recover the information with an external hard drive and an appropriate data recovery program, but getting the 10.4 original discs is increasingly difficult. If a Mac is Intel, only the original discs can be used to install 10.4 which you would need to call AppleCare for and hope they still have a copy of, or a cloned backup. If it is PowerPC G3, G4, or G5, you can probably find the 10.4.6 retail disc, discussed here to Archive and install 10.4.
Before Archive and Installing, which you can do with either the original 10.4 or retail disc, be sure to attempt that data recovery. If you choose to try to Archive and Install 10.5, and you have PowerPC, you'll lose access to Classic Applications. You could upgrade to 10.6 if you have Intel and 1 GB of RAM, or 10.7 if you have 2 GB of RAM, but some application compatibility might be lost the further you upgrade.

Using Firefox to access facebook chat Button or online friiend chat button generates a Black screen with CANNOT LOAD IMAGES and no chat window opens.

This does not happen in other browsers and it happens on a variety of computers I have access to and would seem to be a common problem but I can find no identical cases in my searches of
Firefox , Facebook or windows help or Google search. My home machine is only a P2 with WINXPCORP but works fine and I have done all updates but still have this continuing problem every time I try to use Firefox
to access Facebook chat but it does not happen with IE or chrome
The response to clicking on chat button or friend chat is a black screen with small center square box with blue title bar that says
'' VIEW IMAGE FULL SCREEN - (42) FACEBOOK X""
center of box is ""! "" mark in yellow triangle and wording
"" CANNOT LOAD IMAGES ''' OK
clicking on OK returns to facebook page but no chat opens.
Some times |VERY RARLEY if as the page loades you click on
chat button with 1/2 second of it appearing chat will open.

Hi,
Please also see [https://support.mozilla.org/en-US/kb/Problems%20using%20Facebook%20in%20Firefox this.]

Computer loads black screen installing Windows 7 / 8

Hello,
I have installed Windows 7 on my machine several times without any problems. After updating to Mountain Lion however my computer will always hang at a black screen when it is time to run the Windows installer.
I have tried this with Windows 8 and experience the same issue.
Any ideas / help would be very appreciated
Thank you so much
Joseph

bump

(Mid-2009 MacBook Pro) Black screen on windows 7 disk boot up

Just tried to boot up from a windows 7 install disk, but I just got a black screen. Nothing else happened. Tried using an xp and vista disk also, but they both produced the same results. I've installed windows plenty of times from this computer before, but for some reason this time it decided not to work.
Any suggestions?

The only other relevant Support document is this one: If your Mac won't turn on - Apple Support but if your Caps Lock LED illuminates when you press it then your Mac is not completely dead. Technically, it turns on, even though it appears to do nothing else. In that case Apple refers you to the following document: Troubleshooting: My computer has no video but I doubt it will help because you cannot even get your Mac to start.
You will need to obtain the System Install DVD as I wrote, so that you can start the Mac, load an operating system, and format the SSD so that OS X can be installed. You might need to remove the SSD and install a conventional hard disk drive instead, at least until you can get the Mac working to the point you can install an operating system.

MOVED: P7N Diamond Black screen until windows loads

Similar Messages

Maybe you are looking for