MOVED: Please Help - First PC Build, Liquid cooler sounds like it will explode

This topic has been moved to MSI Intel boards.
https://forum-en.msi.com/index.php?topic=251087.0

Can you provide the photos of the "7 socket plug" and the molex like plug from the case?
The empty 4 pin plug you mention I think is this?↓
This could be connected to PSU with molex cable, just for more stability, plug or not plug depends on you.
As for the cooler...make sure there's no cable hit or smth. Without picture or cooler name I just can't tell.

Similar Messages

Please help me to build the logic

Hi All,
Please help me to implement the following logic.
The conditional statements should not only be executed in sequence, but also if any of them are true they should not be overridden by any subsequent conditional statements being true.
When actual effort Accepted or Rejected for AST proposals and calculate a flag for “enhance to AST guideline” = Y/N as follows for each employee and display at the employee level
1)If AST eligibility = N AND proposed AST % >0, then “N”
2)Else If AST eligibility = N AND proposed AST % = 0 then “n/a”
3)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST = 0 then “Y”
4)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST >0 then “N”
5)Else If AST eligibility = Y AND Act Rank = 2 AND proposed AST = 0 then “Y”
6)Else If AST eligibility = Y AND AST % is greater than or equal to the AST guideline minimum AND less than or equal to the AST guideline maximum, then “Y”
7)Else If AST eligibility = Y AND AST % is less than the minimum guideline OR greater than the maximum guideline, then “N”
I tried the following code but I am not getting the expected result .
Could you Please help me to build the logic.
Your earliest response is very helpful to me.
if (upper(P_stat)='ACCEPTED' or upper(P_stat) like 'REJECTED%') then
else if NVL(P_elgi,'N') <> 'Y' AND P_prop > '0' then
P_flag := 'N';
else if(NVL(P_elgi,'N') <> 'Y' AND P_prop = '0') then
P_flag := 'N/A';
else if ((NVL(P_elgi,'N')='Y') AND P_rank = '3' AND P_prop = '0') then
P_flag := 'Y';
else if((NVL(P_elgi,'N')='Y') AND P_rank = '3' AND P_prop > '0') then
P_flag := 'N';
else if((NVL(P_elgi,'N')='Y') AND P_rank = '2' AND P_prop = '0') then
P_flag := 'Y';
Else if (P_prop >=ast_min_guide AND P_prop <= ast_max_guide ) then
P_flag := 'Y';
else
((P_prop < ast_min_guide) OR (P_prop > ast_max_guide)) then
P_flag := 'N';
end if;
end if;

Thanks for ur quick responce .
When actual effort Accepted or Rejected for AST proposals and calculate a flag for “enhance to AST guideline” = Y/N
Once the above condition is satisfied we have to check for remaing conditions
if (upper(P_stat)='ACCEPTED' or upper(P_stat) like 'REJECTED%') then
once it is satisfies then we have to go for remaing conditions.
how can we do it in CASE statement.
1)If AST eligibility = N AND proposed AST % >0, then “N”
2)Else If AST eligibility = N AND proposed AST % = 0 then “n/a”
3)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST = 0 then “Y”
4)Else If AST eligibility = Y AND Act Rank = 3 AND proposed AST >0 then “N”
5)Else If AST eligibility = Y AND Act Rank = 2 AND proposed AST = 0 then “Y”
6)Else If AST eligibility = Y AND AST % is greater than or equal to the AST guideline minimum AND less than or equal to the AST guideline maximum, then “Y”
7)Else If AST eligibility = Y AND AST % is less than the minimum guideline OR greater than the maximum guideline, then “N”
I tried the following code but I am not getting the expected result .

Lenovo g550 cursor moving Please help

Im struggling on here really....lol....
Im having trouble with my G550.......when im typing ....if im not watching the screen when typing, I find the cursor has moved into the middle of another word after pressing the space bar......also, after pressing the return key, the cursor has moved uptosomewhere bizarre and not where I want it to be.....
Its driving me mad and wastes so much time correcting sentences........
Im not a pc wizz but can get by !!!!
Please help.........
Thankyou
Moderator edit: Matched subject to content.

http://forum.lenovo.com/t5/Lenovo-3000-and-Essential/Pointer-skips-around-while-typing-on-G550/ta-p/...

Please Help "DPS App Builder"

Please Help
I am using the "DPS App Builder" I.
Processing of the end, it will show the error after you click the button to create APP.
It can not proceed message "Unable to connect to server. Verify the network settings, please try again" contents of the error that is out.
My computer has been connected to the Internet.
I have tried many times, but it will be the same error.
Why not?

Additionally, have you quit app builder and re-opened? There was one error (it might be this one) that requires you to do so, otherwise you'll just get it indefinitely.

While updating, my I-phone froze with apple on screen. Hasn't moved, please help

While updating, my I-phone froze with apple on screen. Hasn't moved, please help

If it's frozen you may have to do a reset.
Hold down the home button (circle with a square in it) and the sleep/wave button (button on top) together until the phone restarts.
It may go into recovery mode, which means I hope you have a backup

Please help! Shared Library Error... no applications will open!

Hi. Major issues!!
My computer was unplugged for 2 weeks (renovations). When I set it up in my new office, none of my applications would open! (Microsoft, Adobe, AOL, etc...) Safari is working.
I get this error message:
The application "Photoshop" could not be launched because of a shared library error: "5<application><CarbonLib><CFMPriv_SpeechRecognition>"
The application "Word" could not be launched because of a shared library error:
"8<Microsoft Word><CarbonLib><CFMPriv_SpeechRecognition>"
The application "AOL" could not be launched because of a shared library error:
"9<AOL (Bootstrap)><CarbonLib><CFMPriv_SpeechRecognition>"
The application "AppleWorks" could not be launched because of a shared library error: "4<AppleWorks><CarbonLib><CFMPriv_SpeechRecognition>"
Here's what I've tried...
I have tried to install combo update 10.3.9. .. didn't work.
My computer was purchased in 2004... just moved to a new house... do not know where my installation dvd is... so to reboot on that is not an option.
I tried disk repair permissions... didn't work!
I opened my log console to view the crash logs... and it appears a lot has crashed... but I can not understand what any of it means!?!
Can anyone help or offer some advice?
Can anyone understand a crash log if I post it?
Please help!?! Taking an online masters course and this is a major dilemma!
Thanks,
Lindsay

Hi Lindsay,
"Can I get one from a mac store? Does it have to be the original one I used when I purchased my mac?"
No, you can no longer purchase 10.3 Panther disks from Apple Stores, online or otherwise. You may however, be able to purchase replacement disks for your computer (if Mac OS 10.3 were the original install disks that came with your mac) by calling Apple and explaining and having the serial number ready of the computer.
If your installation of 10.3 was an upgrade you can purchase retail copies of 10.3 disks online from many resellers, such as on ebay or sites such as FastMac, but be sure to purchase a retail box set and not upgrade or machine specific disks.
Did you perform all of the steps that Kappy steered you to in Dr. Smoke's FAQ first and your only option left is the Archive and Install?
littleshoulders

Please Help!!! My iPod Touch 5th gen will not turn on!!! If anyone can help, please do so!!!

I connected an iPod shuffle charger to the earphone slot of my iPod touch 5th generation and now it will not turn on at all!!! Can anyone please help me with this problem?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
ChrisAllen109 wrote:
I connected an iPod shuffle charger to the earphone slot of my iPod touch 5th generation and now it will not turn on ...
But it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first...

Please help: After updating my iPad 2 to ios7 it will no longer sync with itunes

Hi Can anyone help. My iPad 2 has been updated with ios7 and now when i try and sync it with itunes (vs 11) I get this error: "the iPad cannot be synced because the computer is no longer authorized for purchased items that are on this ipad". When I try to authorize the computer it says its already authorised as one of the 5 available. I have tried many times and now at a loss. It worked 100% before updating. Please help!

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings will be reset.

PLEASE help, I can't get the sound on the videos on my iPod to work!

I converted them and everything because they werent in the proper format, but now when I try to play them on my iPod there's a fine picture but no sound! Somebody please help me!

Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
Search this forum for recommendations, but beware of spammers trying to sell you their own product.

Please help! t61p: bluetooth stereo headset sound coming from only one side?!!

Just bought a X5i stereo bluetooth headset (A2DP protocol) from BlueAnt and paired it with T61P. The laptop recognized it and it connected to it. When i started playing audio though, the sound is coming only from one side of the headset. Do I need to update the bluetooth drivers for lenovo?? What do i need to do? Please help!

Hi Ledbroke,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv2700 Notebook and having sound issues when headphones attached. Here is a document on troubleshooting audio problems with external speakers, headphones, and HDMI sound devices. Under the two quick test section it shows you how to troubleshoot headphones.
Hope this helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Please help. Had to restore, now free & purchased apps will not reinstall.

I get a message that states this:
Some of the applications in your iTunes Library were not installed on the iPod "mckittri's iPod" because you are not authorized for them on this computer.
It is the same computer I set it all up with. WTH? Please help.
Computer is a Dell Window's OS & it is an iPod Touch.
Scot

Nevermind, I got it figured out. Thanks

Please Help - Novice - ITunes update lost my sound.

I have spent all day trying to sort this out, please help.
My IPhone asked me to update ITunes to the latest version, I did this, updated the IPhone as well and then added some music, after it synced I noticed my sound icon had gone and when I tried to play music/video's there was no sound on the computer at all.
I uninstalled ITunes and Quick time and re-installed, no change, I did a system restore back a day and the sound came back but ITunes reverted to the older version and when I plugged in the IPhone is said it could not access it as the library was created on a newer version.
I use windows XP, have checked the Sound in Control Panel and nothing is registered, Direct X says no sound card attached, I have tried downloading Direct X again, in the Devices Manager is has a Multimedia device listed with the yellow? mark, I have gone through trying to update drivers but nothing works.
The only way I can get the sound back is a system restore but then ITunes is out of date and will not access my phone, if I then update ITunes from the website it takes off the sound again so I am going round in circles, has anyone else had this problem or has anyone got any advise.. please keep in mind I am not very technical..

try just move the .dll file from C:\Program Files (x86)\iTunes (or C:\Program Files\iTunes for window 32 bit) to desktop. reboot should fix it. if not you have to reinstall itunes(http://support.apple.com/kb/ht1923) choose repair if one component does not work.

A tiny little cry for help: mic in bootcamp makes me sound like a mouse!

I posted this on the InsanelyMac forum, and I thought I'd post it here too because I'm just that desperate for help... thanks in advance for reading.
I run a MacBook Pro Core 2 Duo. When Snow Leopard came out I installed it and partitioned my drive to allow me to run Windows via bootcamp for the purpose of playing Aion with my husband.
The game works fine, although it only works correctly when I'm hooked to my large Dell monitor. The built-in display makes the mouse/cursor not function correctly in-game.
But that's relatively minor... the biggest problem is that the built-in mic, as well as any mic I plug into the Line In, makes me sound like a mouse when I speak. I SO don't want to be known as the squeaky mouse over ventrilo. (The problem occurs in a regular sound recorder too, so it is NOT ventrilo specific).
The audio device is listed as Intel High Definition Audio: Device ID 0x83847680, Audio ID 30 - whatever that means.
When I dive into the Control Panel audio preferences when booted into Windows, the driver is listed as IDT audio.
Audio output seems to function perfectly.
I would sure appreciate help if anyone has expertise or experience with this sort of thing. I'm at a little bit of a loss.
TIA,
Jen

Hey, I had a thought, I don't know if it'll work and won't get the chance to find out until later tonight if I'm not too tired or until later tomorrow.
I think that if the IDT drivers aren't installed in the first place, perhaps the issue can be averted entirely. However, it's going to take a bit of knowledge to do and some patience. The partition will need to be remade entirely so that one may end up with a fresh operating system. When the SL disk is put into the computer, instead of running the full driver setup, pick the drivers directly off the disk by exploring its folders and only install the ones you need. Instead of using the IDT drivers, I believe the SL disk also has Realtek HD audio drivers (if I remember correctly from the last time I looked). My thought is that this manual method can prevent having to deal with the IDT drivers which I believe are part of the issue.
I understand that reinstalling XP is a process in itself, but this is the only solution I can think of. If manually installing doesnt work, my next move would be to use the drivers that come off the Leopard disk instead of the SL disk.
Like I said, this is just a thought I have so when I get to it later I'll let you know how it goes unless you decide to give it a try before me.

Navbar text moving- PLEASE Help.

I've made my own Navbar, and because the text and images moved and did all sorts of strange things in FF 3.5.2 see:http://innerspheresmusic.com/Home.html
I tried out lots of variations with
1.altering the size of the text box
2.altering the size of the bar itself
3.changing the gaps between the words
4.making the bar + Orb image into a JPEG file
5.making one text box containing all the words instead of 10 separate ones
5.adding a 4-letter word in the text box where the orb is, and changing the colour to white + 0% opacity ( but this reverted to the same colour as the other words in the text box when I published it so I've removed it again)
You can see the result here: http://innerspheresmusic.com/Seminar_news.html
In Safari, the text box in the supposedly re-worked navbar:
http://innerspheresmusic.com/Seminar_news.html
also moves to the left.
I really don't know what else to do. Can someone with more experience please give me some advice.
Thank you, Kay.

Have you tried emptying your Safari cache before republishing to your site folder? That usually solves any shifting text problems that I have experienced. Also, if your site has a lot of pages like mine does, I have found it also helps to empty the cache, restart my computer and then republish. That has neve failed me.
Good luck!
GGY

Please help me to build a servlet within j2sdk1.4.and higher

somebody help me how to build a servlet and another javax technology

Try this code (and read its comments). If you need more help, don't hesitate explaining your problems or doubts
import java.io.*; // To use PrintWriter object
import javax.servlet.http.*; // To extend from HttpServlet
// To compile this class you have to include servlet.jar in the CLASSPATH variable
// To run this servlet you'll need a Servlet Container like jakarta-tomcat that
// you can download for free from http://jakarta.apache.org/tomcat/
// The simplest way to try this servlet is copying it into <TOMCAT_HOME>/webapps/examples/WEB-INF/classes directory
// Where TOMCAT_HOME is the folder where you have Tomcat installed, then open your browser
// and paste the following URL: http://192.168.15.210:9090/examples/servlet/MyFirstServlet
public class MyFirstServlet extends HttpServlet {
    // Implements the doGet(...) method of the abstract class HttpServlet
    // This method will get the control of the execution if you "point" your
    // browser to this servlet or if you use the method GET in a HTML Form
    // setting the Form's "action" attribute to this servlet URL
    // That's something like <form name="frm" method="GET" action="http://yourhost:port/servlet/MyFirstServlet">
    public void doGet(HttpServletRequest request, HttpServletResponse response) {
        // Define the content type that your servlet is going to issue
        // You should use "text/html" if you are going to issue HTML code
        // You should use specific MIME-TYPES depending on your intended output
        response.setContentType("text/plain");
        try {
            // Get the response's PrintWriter to write to the output
            PrintWriter out = response.getWriter();
            // Print whatever you want. This is going to be received}
            // by your browser.
            out.println("Hello world!");
        catch (IOException ioe) {
            System.out.println(ioe.getLocalizedMessage());
}

MOVED: Please Help - First PC Build, Liquid cooler sounds like it will explode

Similar Messages

Maybe you are looking for