MOVED: Power of the Press - Neo4 Bios Issue - Can Anyone Test This?
This topic has been moved to Overclockers & Modding Corner.
Power of the Press - Neo4 Bios Issue - Can Anyone Test This?
This topic has been moved to Overclockers & Modding Corner.
Power of the Press - Neo4 Bios Issue - Can Anyone Test This?
Similar Messages
-
Power of the Press - MSI Neo4 SLI Bios Problem
For those interested, I just sent this to hardocp because they did the review on the MSI SLI Platinum. Since MSI headlines this review on their website, maybe hardocp can do something about this bios problem. Enjoy and please send more emails to hardocp so we can get this problem addressed! Believe me, Ive seen this works with washington politicians, I know it can work if we all do it.
I appreciate companies like yours doing extensive reviews about products. However, your review caused me and a whole bunch of others to purchase this board with enormous problems associated with it (check out the msi forums). The problem is that this board works only for 130nm chips in which you tested on. On the newer amd 90nm chips, this board is the worst performing sli board out in the marketplace (for both winni and venice core chips). You need to do something to stop people from buying this board because its just awful and the folks from MSI are silent on the subject.
It's gotten so bad that people have gone out and purchased other sli boards, transferred all of the equipment out of it and into the new one and guess what...voila, no problems. Anyway, some of those in the other user forums had the same problem but those other manufacturers quickly fixed the problem. Its just getting worse and worse. I feel like both msi (and I am MAD) and reviewers like you (unless you don't know about the problem) are silent on this and its cost me hard earned MONEY ($175 for the mobo) and hours and hours of time...
You have a LOT OF POWER with MSI and I can see it because they headline your review on their website (power of the press). For Gods sake, please do something before others make the same mistake or if you can get MSI to allocate resources to fix the problem...you would be HEROs! Thank you.Quote from: Husker_Faithful on 19-May-05, 11:56:11
Ok, I guess I am confused some, where is the issue with the new cores? I have no issues running the San Diego core and the my memory at the listed and published speeds.....
Quote
Also is your MOBO the SLI type? I run the SLI Neo4 with a San Diego core without any issues. In fact I dropped it in and booted using the San Diego as a direct replacement for a older (if 6 months is old!!) 3500. I have OC'ed with Corecetner as far as I can push it and runs awesome!
Quote
GUys, I am not sure exactly what issues you are experiencing as there can be MANY factors! But my SLI Neo is running awesome! It overclocks (no Tiresmoke, i won't go into that in this forum ) and has NEVER once BSOD, or rebooted or even crashed! Not once and I push the crap out of this as it is my gaming box. Also TS you are SO correct on the clock settings on the ultras, you gotts make sure they are the same or it will cause issues. The only thing I am kinda bummed about is the lack of real performance with the dual 6800 Ultra's, but that is a Nvidia issue not MSI. Guys I may be blessed, but I have run three Neo MSI brds, 2 939 and 1 754 and never had any issues....
Quote
I have yet to experience any boot/reboot issues...So I think we should wait to hear more from this person before we assume anything...
Quote
I have the nForce4 SLI brd and i run a new San Diego..it booted up fine and zero problems. But man is this thing FAST
Quote
According to MSI, the Neo4 will work fine with the new cores, the Neo2 will need a bios upgrade
Quote
I set my brd up the first time for SLI with dual cards and have never had any issues..Sorry guys, but I guess it's the luck of the draw, but I have yet to ever ave an issue with any MSI brds..I have a Neo2,Neo4 and the older 754 slot Neo..no issues.
7 of your last 11 posts. Why man? Why?
This is from MSI at the "listed and published speeds"
Dear Customer,
Since the mb has not been certified to support the Venice and San Diego Core processors, please wait until beginning of June, 2005 for the release bios support for the mb.
Sincerely,
Technical Support Division
MSI Computer Corp.
As for overclocking have you read these?
https://forum-en.msi.com/index.php?topic=75897.0
https://forum-en.msi.com/index.php?topic=79534.0
https://forum-en.msi.com/index.php?topic=79827.0
Look, I have already been threatened to be banned because of my sarcastic replies to you. Read every one of your responses I listed. Obviously OTHERS are having problems. WHY don't you help them instead of TAUNTING people that yours works. They are upset, and you make them feel dumb like it's their fault.
Man I have tried to contribute so much to this issue that at least 20 different members here are having, I have tested with an Asus SLI board, I have tried different BIOS's and posted results, I have theorized with others and I feel like you are slapping me in the face by restating time and time again "what problem mine works great"i
I'm on a verbal warning because I didn't have respect for you. Well how are you respecting the other people who have problems by saying you don't know what their issue is. Read up on it or help them, instead of creating tension. Please? -
I have a mac book pro running Lion 10.7.4 and every time I use Google Earth The computer crashes by lowering a black curtain and then asking me to hold the power button down until it closes and press the power button again to restart it. Can I fix this? It bugs me when I'm looking at real estate.
I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
I just purchased a 3TB Time Capsule. I live in Italy and have 220V power. The Time Capsule is rated for that, but the cord says 125V. Can I use this cord with an adapter, or do I need to buy a new cord at an Italian store?
Due to the kind of plug used the US power cord is rated at the 125v value.. and legally we cannot advise you to use on higher voltages.. although I have never had issues in Australia.. 240v.
But adapters from your Euro power plug to US are generally ugly .. unsightly things.. and often sit high above the socket and are none too stable.. I agree with Bob.. just go out and buy a standard figure 8 power cord.. check with Apple in Italy for a white one.. if you are going to have it on show.. black are far more common. Or even check ebay for a standard power Apple power cord as a number of items they sell use the figure8 socket. -
Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?
The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.
-
iMovie cuts off the bottom 10% of my video image once it is moved to the editing area. I need the whole image. How can I solve this?
I have solved the problem by changing the Project Aspect to 4:3 rather than wide screen.
-
hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help
Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK. -
I cant connect to the itunes store and the support team didnt really help anyone facing this issue with ipad mini!!! I need help
Here's the troubleshooter.
Can't connect to the iTunes Store -
I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?
You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
When I copy/paste a paragraph from a PDF doc (onto Facebook status bar, for example) it pastes with no spaces between words. I.e: "The manhadajugofcoolwaterand offeredmeadrink." How can I fix this? I've searched everywhere for the solution but didn't find anyone had this issue. I'm new to Apple so any help will be much appreciated. Thanks!
I can't speak about this occurring with FaceBook since I don't use FaceBook, but I see the same type of thing when I copy and pasted from websites. It doesn't always happen and I cannot find any particular set of circumstances under which it occurs or does not occur.
I am merely responding to let you know that it happens to me as well and I have seen no way to correct it. I'm not so sure that there is a way to correct in in that it may have something to do with how the original text is formatted in the PDF or on the website and how it eventually "fits" into the text field or the area in which it is pasted. -
Have an iphone 5c 8g. The home button has stopped working. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode and no evidence of damage.
If you are playing in hockey arenas a lot or if you are bringing it into bathroom same time as shower it may not seem like much but overtime the steam can acquire and build up in the phones usb dock flex cable swell as the home button flex cable. Bring again into apple store and should be covered under warranty again. could also be a delay in a 8gb 5c software may just be very lag.
-
6th gen nano keeps displaying no radio signal even though I have the earpiece plugged in. Can anyone advise? Thanks
Hey there larkandwarbler,
It sounds like you are experiencing multiple issues with this iPod Nano 5th Gen. From what you are describing it seems we can isolate this to either the software or the hardware on the device with a couple of simple steps assuming you have tried another set of headphones. First, reset your iPod with this article:
How to reset iPod
http://support.apple.com/kb/HT1320
How to reset an iPod with a Click Wheel
iPod models with a Click Wheel include:
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If you are able to reset it, but the issue persists, or you are unable to reset it, I would next attempt restoring it with iTunes:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Thank you for using Apple Support Communities.
Regards,
Sterling -
I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?
Howdy Lumagofe,
I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
All the very best,
Sterling -
iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this and not loose what is on the phone at all?Hi, simonRM.
Thank you for visiting Apple Support Communities.
I understand that you are unable to restore your iPhone. Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
If you can't update or restore your iPhone, iPad, or iPod touch
Resolve iOS update and restore errors in iTunes
-Jason H. -
Over half my albums in iPhoto won't display the enlarged photo. How can I correct this?
Over half my albums in iPhoto won't display the enlarged photo. How can I correct this?
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Maybe you are looking for
-
Sender and receiver File Adapter
Hi , Sender File 12345566767 fjwehifh 09782345sdfgsjghjghhh 83475 dsf888234 dsfsdf wefrwr Question1 : I need to Treat the Complete Message as a Field Eg : MY Source Structure Recordset record Field1 0..1 I need to read complete file as on
-
High CPU consumption with repaint while dragging
Hi! I certainly hope someone can help me with this. I am building a graphical user interface for a graph with custom nodes and edges, the nodes being draggable. I have tried making each network component (node or edge) a JComponent. Now, I'm trying u
-
The problem pic's address: http://s2.album.sina.com.cn/pic/55aee59a02001291 (please ctrl+c the URL ) In the pic,the B.swf has a label,the label's position is random. Then,the A.swf has a MovieClip named Mc1,and Mc1 loadMovie B.swf. We can see,the Lab
-
Table fields for Status of an equipment.
Hi Experts, Can anyone tell me Tables and fields available for Status of an equipment. Which is shown in IE03. i.e. 'INST','AVLB'......etc. Thanks, Ashesh Chokhawala.
-
the commands to lock remotely dont work. If you have tested it what did you send your phone? I text #lock#<pw> and it didnt work.