MOVED: Problem with MSI K9N4 Ultra-F

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=117587.0

Stop updating the BIOS.
Your memory preventing the OC.

Similar Messages

Problem with MSI K9N4 Ultra-F

Here's my configuration:
DualCore AMD Athlon 64 X2, 2100 MHz (10.5 x 200) 4000+
MSI K9N4 Ultra-F (MS-7310)
2XKingston (1 GB DDR2-533 DDR2 SDRAM)
Using BIOS settings I cannot overclock my CPU for a single MHz. When tried, I had to clear CMOS. Also, I tried to use ntune utilities for overclocking, but when I enter any of those utilities, my computer freezes. That started when I flashed BIOS to a newest version(before overclocking was possible). Now I can't roll it back. Is there any chance to flash previous BIOS through Windows(I'm not familiar with flashing from floppy).
What should I do?

Stop updating the BIOS.
Your memory preventing the OC.

Sata Raid problems with MSI KT4 Ultra Via kt400 chipset

ok i am having major problems setting up my sata raid in my brothers msi KT4 Ultra via KT 400 chipset
it comes up with my irq settings are wrong
my hard drives are WD 120 GB 7200rpms SATA - sold my mobo asus A7N8X - Delux and used my bros mobo above but just cant get them to work if ne one has ne idea on how to fix it (bios is still factory default do i have too flash it to get it too work etc)
would help lots thanx

you dont need multiple threads on the same thing

Dual monitor problem with MSI 5950 Ultra

OK, I finally got the money to have a dual monitor setup.
I am using a MSI 5950 Ultra card
Soyo 600T Dragon Ultra MB
1 gb Corsair XMS 3500 ram
AMD 3000+ processor
Adaptec 2410SA SATA Raid card
4 Western Digital 74gb Raptors in RAID 0
2 V201S 20.1 inch Viewsonic LCD monitors.
XP Pro OS
I have updated all BIOS/DRIVERS on all hardware.
The problem is when I connect both monitors I get a system freeze. It is random and does not have to be event (ie mouse movement) generated. There are no event log entries. If I disconnect the analogue monitor the freezing goes away. Is this a known bug? If so when can I expect a driver/bios fix on the card? If not can anyone suggest a fix.
I have removed all non-essential cards.
THanks
Steve

Have you installed the driver of the monitor?

Problems with MSI KIT4 Ultra

Dear members of this forum:
I have a problem with my mobo and i want to talk with you about it. 2 days ago, y bought a new chasis (with a new power supply (450W) to change my old one (350W) and some new components (a new modem, dvd rw and new HDD)
I removed all the components from my old chasis and passed them to new one. When i turned on my computer, WinXP started to Crash. Trying to investigate, i was removing the components (hdd conectors, lan card, modem, ect..). and the problem continues... But, at this moment, when i tried to turn on the computer for 4th time, It never come back (i cant turn on the computer) I removed everything component to reduce the complexity. Only the mobo, video and memory and i cant turn on! I removed from the new chasis and use the two power supplies (new and old ones..) and nothing. Nothing... No of the light signals ignites, i cant see the power led or some light. I tried to clear CMOS, but nothing happends... Anyone can help me? The mobo is out? I need to replace?
Thanks for help

450 W. or 350W. really doesn't say much about P.S.U.s. Better tell us how much MAX AMPS they give to 3.3, 5 and 12v. lines. When turning on, do you see any life sign ? ( Fans spinning, any light ) Try starting all install again. Remove Mobo from case and put it over an isolated surface and start with min. hardware: CPU and HSF, memory (one stick) and Video Card.

MOVED: problem with MSI notebook L:715

This topic has been moved to Megabook.
https://forum-en.msi.com/index.php?topic=115152.0

yipppy
THX !
Now work without freezing , but now my new problem :
i got a little bit small points in the 3DMark 2005 Demo(1024x768 NoAA) only 3774 point that's not
very good i think.
Now i try to enable the 8xAGP settings, or the fast writes, because i feel i loose some VGA Powa don't
you think ?
And now it is work, but why ? : my Mobo is bad or my VGA or what?
Many thanks :smiley:

MOVED: Problems with msi - G41M-P28

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=148662.0

Hardware list of my pc:
CPU: Intel Pentium Dual Core E5700 3.0Ghz
RAM: 2GB Kingston KVR1333D3N9, PC3 - 10600 CL9 240
HDD: Seagate Barracuda 7200.12 500GB
PSU: Fortron FSP350-60APN, output: 350W, AC Input: 200-240V, 2.5A, 50-60Hz
Mainboard: msi G41M-P28, Bios version : v26.6
OS: Win 7 Pro 32Bit
DVD-ROM: SpeedPlus SuperWritemaster SH-S223

Problems with msi kt333 ultra

my friend bought a brand new msi board and it was working fine. one day he came home from work and saw it was on so he turned it off to save energy then he went back to work. when he came home he tried to turn it on but nothing not even the post screen all he got were 3 beeps after 15 sec it was on. so he took it apart and looked at it and nothing he could do could fix it. well i came over and looked at it. i cleared the cmos and it started up. i thought it was fixed boy was i wrong. it go into windows and there were no cdroms. so i turned it off and checked the cables they were in all the way and then we truned it on again and then the 3 beeps occured so i cleared the cmos and then nothing... not even the beeps all we got was a blank screen. so i took it apart (all the way) and rebuilt it. 15 mins later i tried it again and nothing.... then i cleared the cmos the 3 beeps occured then nothng... i was getting mad quick. so i took out ide #2(cdroms) and nothing... then i just tried booting with the cdroms i got a post screen and then nothing... why is this happening. it posts fine with no ide or floppy connectors connected to it. but then it crashes. i cleared the cmos changed the bat and done everything i could but nothing. can someone tell me whats up cause im about to take a shotgun to it and finish it..... :P

Hi,
take out your RAM stick(s), and put them back again. Try with one stick first, also try with different slots. If none of the slots work, test your RAM on other machine. It could be your RAM has fully spent its life.

Problems with msi p35 neo 2

Default problems with msi p35 neo 2
pc works fine when using windows and the net and emails
only when using 3d mark or games do i ever get problems
just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
temps on the board (from msi dual core center temps cpu 33oc system 47oc)
memory voltage 2.1
any one know the settings for the ram
more details you need
System Details
MotherboardEdit Value
msi p35 neo2 fr
Motherboard BIOSEdit Value
latest
CPUEdit Value
core 2 quad 6600
CPU Overclock SpeedEdit Value
none
CPU HeatsinkEdit Value
standard intel that come with cpu
CPU Idle TempEdit Value
N/A
CPU Load TempEdit Value
N/A
MemoryEdit Value
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Memory VoltageEdit Value
N/A
Video Card(s)Edit Value
ati hd4870
Video Card SpeedEdit Value
N/A
Sound CardEdit Value
onboard
PSUEdit Value
g7 780 watt power extreme
Hard Drive(s)Edit Value
mator dimondmax 21
Optical Drive(s)Edit Value
N/A
Other CoolingEdit Value
3 80mm fans 1 frount 1 back 1 side
ModsEdit Value
N/A
Operating SystemEdit Value
windows 7

Quote
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Quote
memory voltage 2.1
Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x). Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800). The voltage at these settings should not need to exceed 1.95V. So please lower it accordingly. In case the freezes still occure, please run memtest86+ to check your memory for errors.
Quote
msi dual core center
Please get rid of that tool for all further tests. Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

I have a small problem with MSI GF4 MX 420

Hi,
I have a small problem with MSI G4MX420-T(S+C) ( MS-8878 ). Exactly with nVidia WDM Video Capture (universal), which " can't be turned on " by Windows XP.
I have also new drivers ...
Could someone help me?
Asus A7V333
Athlon 1700+
128 MB RAM
Thanks !!!

If you only have 10 seconds of content in a 15-second composition, then you need to either add more content or shorten your composition.
You can shorten the composition by changing the duration in the composition settings.
Since you're obviously very new to After Effects, I very strongly recommend that you start here to learn After Effects.

USB problem with msi (nforce 1)k7d420

USB problem with msi (nforce 1)k7d420
i encountered problem when using my apacer audio steno mp3 player with my nforce(which i don`t hav any problem when using with any VIA chipsets)
it detects and install the device automaticly but when i want to access it,it just gives me error msg
windows xp pro service pk1
nforce nvidia drver v2

http://www.nforcershq.com/forum/viewtopic.php?t=30003
may be ive not loaded it yet

[Athlon64] Problem with MSI RS480M2-IL

Hi all,
I have problem with MSI RS480M2-IL. My problem is My temperature is very high... around 55-60c ... i am using AMD 3000+ Venice and no OC... and SpeedFan unable to detect my Voltage usage... Aida32 also same... 1 more thing is when i tried to run SiSoft Sandra 2005... it will take alot of time to load, sometime will just hang. i Test PCMark04 and found only got 3k for average mark... my friend getting 4k+ and we are using same spec... Below is my Spec:-
MSI RS480M2-IL
AMD 64 3000+ Venice E3
Bios Version 3.8
Geil PC3200 DDR400 2.5-3-3-6
Maxtor 60GB HDD 7200RPM 2mb
Verudium Power Vortex 420W
Hope some one can advised me what to do... my score too low and my board detect temperature and voltage is not accurate... Hope MSI Engineer will look thought and help me... Thank for Viewing !

the underlying "Who's fault is it?" question: AMD64 VENICE CORE (E3) PROCESSORS? or MSI RS480M2-IL MOBOS?
so far, ALL users with this proc/mobo combination HAVE the high (or incorrect) temperature issue. replacing the mobo obviously will not resolve the issue but replacing the proc with one that is NOT a Venice E3 core, does the trick. but of course, not everyone will have the privilege of exchanging their damned proce via the retailer specially if it's beyond the first 21 days of purchase.
in my case, my retailer refused to have the E3 proc replaced with the 'corrected' E6 version no matter how hard you explained the known issues with the E3. no chance of AMD recalling the E3 cores since problems with are only isolated to the particular MSI RS480M2 boards.
so for users that are and will be stuck with this combination, what is the solution then to the temperature issue? in my opinion, it's up to MSI to perhaps release a bios update that will correct this. another important thing to consider is the question: IS MY VENICE CORE INDEED OVERHEATING OR IS IT JUST THE MSI MOBO SHOWING INCORRECT READINGS? the proc overheating in actuality is obviously a lot different thatn just having an incorrect bios temp readings.
based on what i have observed, my Venice core displays the correct cpu temps (33-35*C) when being used on a MSI K8 Diamond mobo. placing the proc back to the R2480M2 board shows a very unusual 61-63*C bios cpu temp. furthermore, if i touch the stock heatsink/fan cooler that i have (for both motherboards), it really does NOT seem to be extremely hot to think that the cpu is actually overheating. in addition, my system using the RS480M2 performs well and has no spontaneous shutting down problems whatsoever. of course, my sense of touch is not as accurate as a thermometer but more or less, if you consider all the points i mentioned, most of us can say that the whole issue is just a matter of incorrect cpu reading.
perhaps the ATI chipset is the one to blame since i have notices as well that the Venice core processors do not seem to have this high temp problems with MSI's K8 mobos with the NVIDIA chipsets.
one last question: so do you guys think that this problem can be resolved by a simple bios revision? (as a dell tech guy, i do know for a fact that bios updates resolves overheating error messages in Inspiron/Latitude laptops)

Need power spec for System Fan Header MSI K9N4 Ultra-F

I need the power spec for Fan Header MSI K9N4 Ultra-F motherboard
I want to use a Panoflow 2.13 Watt fan on the cpu heatsink. Will this
fan burn out the header? I don't have the board yet (it's in the mail - really)
so I can't use MSI Tech Support (I don't have the serial # yet).
thanks
Tomana

Forgot to add fan headers can take at least 6W/0.50A fans.

Anyone using BlueTooth with MSI KT3 Ultra-Aru?

Has anyone setup BlueTooth PC to PC network with the MSI KT3 Ultra-Aru?
Where can one get the transmitter? (assuming it works)

Quote
Originally posted by cje1985
i have a kt3 ultra aru it says it has blue tooth and on the usb 2.0 dongle it says do not remove if you use bluetooth but when i follow the manual to plug it in windows or the software finds the bluetooth connection
Hi,
I have a KT3 Ultra ARU too, and I understand that if you use the onboard Bluetooth connection you must not use the USB connection under the blue sticker at the same time.
I think it's because the onboard Bluetooth connection and the USB connection under the sticker use the same adress (IRQ). So as long as you have no Bluetooth, like me, you can use the 4 USB connections. If you use Bluetooth connection on board, do not use the USB connection under the sticker (the left one seen from backside of your PC).
If you use an external Bluetooth it's not a problem with your 4 USB connections.
ralcan

Neo 2 desert combat shuttering (sliding skipping etc)problem with bfg 6800 ultra

hey guys i just built a new pc after i got everything installed and updated to service pack 2 i installed desert combat only to have shuttering problems especailly turning fast in chopper or plane its kinda like lag or dropping frames but according to fraps its not drop frames just really choppy game play i know its not the card because i stuck it back in barton 3000 board worked fine. put my old msi 5950 ultra in same problem
fixes tried with no sucess
reinstall windows
turned off nv
turned off fast writes
tried my old set of 512 corsair plantinums =i gig dual chan
install nforce driver from nvidia
tried serveral nvidia graphic card drivers even the bet 71.21
turned off spread spectrum
pulled hair out
tried old video card which is 5950 ultra both cards work fine with old mobo
basically im out of ideas
please help
system specs
90mn winchester core 3500 with xp 90 thermalright heatsink
audigy zs 2
corsair 3200LLPro with leds i gig in dual chan mode
two 74 gig raptors in raid o
OCZ 520 watt modstream powersupply
bfg 6800 ultra overclocked from factory 425/1100
xp pro fully updated sp 2
please please please help been working on this for two days without any luck maybe ill just rma the board and get an asus or gigabite board

First off have you been using Driver Cleaner to get rid of all the old bits of drivers? if not go get it read the instructions and use it. Re-start the driver process again. The latest ones on the Nvidia site are probably a safe bet at the moment. So clean your PC with that prog and install new drivers.
Then do as you say you have done and ensure 'FastWrites' are turned off. This is most important. Get 'Riva Tuner' and this will comfirm you have them turned off. Also get the 'Coolbits' registry tweak. Run this and it will add overclocking capability to your display properties. You can adjust both 2D and 3D speeds. Now what you must ensure is that they are both set at the same speed! sometimes the 2D comes set lower than the 3D this can cause symptoms like you are having. Set the 2D to the same speed as the 3D.
I have an XFX6800 Ultra in my K8N Neo2 Plat and it works superbly so fingers crossed doing the above will sort it as they are the main probs with the 6800Ultra cards.

MOVED: Problem with MSI K9N4 Ultra-F

Similar Messages

Maybe you are looking for