MOVED: Problem with OC Genie II Overclock on Z77-GD55

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=254629.0

Quote from: Nichrome on 16-April-15, 18:50:50
Have you possibly tried + and - on your keyboard while CPU Ratio being "highlighted" / "selected" ?
Didn't know you could do that, but I just tried it and it wouldn't budge off Auto.
Quote from: Chike on 16-April-15, 19:05:54
Why change CPU Ratio, and when was XMP enabled? In the pictures you posted XMP was disabled.
Just change My OC Genie DRAM Frequency, and the timings maybe you need to change in the main settings (DRAM Timing mode link, -> Advanced DRAM Configuratio, if there are no such in My OC Genie).
You are using OC Genie, make changes in My OC Genie.
I wanted to change the CPU Ratio because I thought you wanted me to overclock the CPU but not the RAM.
When OC Genie II Overclocking is enabled they recommended not altering any settings in the BIOS. XMP Profile was disabled in the picture I posted earlier because I disabled OC Genie and set the BIOS back to default without any overclocks.

Similar Messages

MOVED: BCLK STUCK!!! BIOS 17.6 Problem with Prefetcher???MSI Z77 Mpower

This topic has been moved to Overclocking, Undervolting.
https://forum-en.msi.com/index.php?topic=165456.0

Quote from: xmad on 17-January-13, 08:44:47
Also for best oc result flash to the lastest release or beta bios listed here.
>>Beta BIOSes<<
Follow the directons to make sure the manaement engine extension of bios is flashed as well.
Follow this link to some screen shots of other z77's using various overcocks:
https://forum-en.msi.com/index.php?topic=162043.0
Have the latest BIOS and latest management extension flashed as well.
I have had this work before with no problems. I was one of the first people to get a MSI Z77 Mpower board. Never had this type of problem with any other BIOS. Problem started with 17.6 BIOS. I have had all the BIOS flashed on my RIG since I have had it.
Not sure what the problem is. Thanks for you help. Those over clocking charts are helpful but not specific to MSI Z77 Mpower mother board and the BIOS is different. Not sure if they are updated to include the new CPU features of "Hardware Prefetcher" item and "Adjacent Cache Line Prefetch" that BIOS 17.6 started to use.

Problem with Javadoc gen'in two instances of a sourcefile in the class list

Hallo,
I have a set of source files that I'm gen'ing with the ant task javadoc.
sourcefiles="javadocs/PTConfigServer-root/src/com/palantir/config/util/SshUtils.java,
javadocs/PTConfigServer-root/src/com/palantir/config/util/StafUtils.java,
javadocs/PTCommons-root/src/com/palantir/util/Pair.java,
javadocs/PTCommons-root/src/com/palantir/util/XMLTag.java,
javadocs/PTCommons-root/src/com/palantir/util/MutuallyExclusiveSetLock.java,
javadocs/PTCommons-root/src/com/palantir/exception/PalantirException.java,
javadocs/PTCommons-root/src/com/palantir/exception/PalantirUserMessageException.java,
javadocs/PTCommons-root/src/com/palantir/exception/VersionMismatchException.java,
javadocs/PTCommons-root/src/com/palantir/util/Mutable.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapSet.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapOrderedSet.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapList.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMapConcurrentHashSet.java,
javadocs/PTCommons-root/src/com/palantir/util/MultiMap.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DefaultDateFormatterFactory.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DateFormatterManager.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DateFormatterFactory.java,
javadocs/PTCommons-root/src/com/palantir/util/i18n/DateFormatter.java,
javadocs/PTCommons-root/src/com/palantir/util/awt/Awt.java"
The first two gen properly with only one of each class showing up in the class list. Then, starting with the PTCommons files, javadoc lists each class twice in the class list. In the actual generated documentation, there is only one instance of the file.
Has anyone seen this before?
Mary

Im having a problem with the variables.
Part of my original problem might be each pxi was in a different project. and i had two projects each its own IP. Using this method i did not know how use two differnt variables from two differnet pxi' s with the same program.
if your still following.
i tried a simpler way
i modified my project to include both ip addresses.
this way In my window environment my vi calls the variable. i made sure that i right clicked and chose the variables from the correct ip.
what i have is two status indicators and two update buttons.
the status tells me what stage the test is in
the update button is for the user at the end of the test he can update the screen with the results.
currently only my second pxi is updating status and also the update works
this is my windows vi alias file
[My Computer]
My Computer=localhost
[S4000xH-System1]
S4000xH-System1=192.168.110.10
[S4000xH-System2]
S4000xH-System2=192.168.110.3
do i need to bind to source or use the single writer. im going to try to undo the single writer seems like this would could onluy better it but doesnt seem like its for my application.
i forgot to mention that the varibles i use were there listed as dependancies for the windows evirment have a blue question mark but show what is wrong.
where i have the variables under the ip address there are no blue question marks

MOVED: Problem with SATA DVD/RW

This topic has been moved to AMD64 nVidia Based board.
Problem with SATA DVD/RW

I use the Plextor PX-712SA's with no issues. However...I do not believe the SATA versions require jumpers. Try plugging them in on SATA port 1 or 2, making sure those are enabled in BIOS of course. Make sure all connections are secure. There have been some issues with these particular drives not operating properly, but it has not been an issue with seasoned system builders, so the problems may be with the builder himself. Usually, Plextors are so good, they'll almost burn a paper plate! Try a different medium, maybe another brand of blank CD or DVD.
You may also want to check Device Manager in Windows, to see if it is listed "This device is working properly"!

MOVED: Problems with IDE drives being recognized in Vista

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=105881.0

This is a known problem with Internet Exploder 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

MOVED: Problem with OC

This topic has been moved to Overclockers & Modding Corner.
Problem with OC

Quote
Originally posted by Deathstalker
What kind of Hard Drives are you running? Where are they connected?
I would also try loosening the timmings on the RAM, try 3.4.4.8.
Take Care,Richard
My sata I have connect on 3, ram I was try to run on 3-3-3-6 1:1 and too 166mhz, stll prime get down.

Strange problem with 5th Gen iPod

I have one of the late 2006 5th Gen iPods which I got for Christmas, it originally had a defect with it's dock connector port and data transfer didn't work, I had to get it replaced. Now this one seems to be having loads of problems like just freezing while playing songs and skipping. But the reason I'm typing this message is becuase now after charging my iPod using an adaptor, I go onto iTunes on windows XP, then when I plug it in, It doesn't appear anywhere, says no power remains and then switches off and doesn't turn on no matter what I try, reset, center button, play.... I'm starting to think that iPods are very poorly built pieces of electronics sold at a very high price. Someone please correct me.
Edit: when I plugged it in, it didn't do anything at first, just normal screen showing full battery. Then I plugged it out and back in and then I got the no power warning.

No they are not. All of mine have worked fine and so have all the Windows users I know. Is that enough correction?
As far as your problem with the iPod, let it run down for at least 24 hours before proceeding.
Before starting, read this:
http://docs.info.apple.com/article.html?artnum=305136
Even if no new drivers are available for your computer, delete and reload your USB driver.
Next charge your iPod (use the wall charger) for at least 30 minutes then connect it to your computer. Use a rear port on your computer and disconnect all other USB devices except for your keyboard and mouse.
Now reformat your iPod (FAT32, don't use a quick format) and then Restore it in iTunes.
I am assuming your are using iTunes 7.1.1.5 and Quicktime 7.1.6

Problems with 2nd gen Apple TV dropping network

Hoping somebody can help. I have two second generation Apple TV units that are constantly dropping off my network. I have to re-enter my apple ID and password almost daily. I am on an entirely Mac network, Imac (10.6.7), Airport extreme and express. My other mac devices have no such issues and remain on network without issue. I only have this problem with my apple tv devices. Both have been updated to the latest software version and the issue remains. Does anyone else have this issue? Any help would be greatly appreciated. Thanks!

Welcome to the Apple Community.
Your Apple TV's may be experiencing interference, have you tried changing wifi channels.
Check your network settings are correct and try restarting your router. update the routers firmware if appropriate.
I'm assuming the 2 Apple TV's have different names.

BCLK STUCK!!! BIOS 17.6 Problem with Prefetcher???MSI Z77 Mpower

BIOS 17.6 added the new CPU features.
I think the new BIOS CPU features of "Hardware Prefetcher" item and "Adjacent Cache Line Prefetch" options are part of the problem. When I disable hardware prefetcher my memory performance shoots way down. BUGGY!!!!
I am unable to over clock my BCLK. What is going on!!! HELP!!!

Quote from: xmad on 17-January-13, 08:44:47
Also for best oc result flash to the lastest release or beta bios listed here.
>>Beta BIOSes<<
Follow the directons to make sure the manaement engine extension of bios is flashed as well.
Follow this link to some screen shots of other z77's using various overcocks:
https://forum-en.msi.com/index.php?topic=162043.0
Have the latest BIOS and latest management extension flashed as well.
I have had this work before with no problems. I was one of the first people to get a MSI Z77 Mpower board. Never had this type of problem with any other BIOS. Problem started with 17.6 BIOS. I have had all the BIOS flashed on my RIG since I have had it.
Not sure what the problem is. Thanks for you help. Those over clocking charts are helpful but not specific to MSI Z77 Mpower mother board and the BIOS is different. Not sure if they are updated to include the new CPU features of "Hardware Prefetcher" item and "Adjacent Cache Line Prefetch" that BIOS 17.6 started to use.

Problems with shuffle gen. 2 not recognized by computer or itunes

Hello to all who may help me solve my problem.
I received a Gen. 2 Shuffle with 1GB several years ago, and used it over that time. It has lasted longer than 2 laptops and I hate to throw it away if it isn't fixed or the problem isn't solved soon.
I received a Win. 8 laptop as a gift two years ago, and now my laptop is not recognizing the shuffle. The laptop is an ASUS model.
Besides receiving the message "This device is not recognized by the computer," I researched and installed and uninstalled iTunes following all instructions I could find online. I have iTunes 11.3.
My biggest concern is the message I have after studying "hardware ids" in the device. It reads "USB\DEVICE_DESCRIPTOR_FAILURE". I have uninstalled all USB root hubs and rebooted several times.
It works fine on my sister's computer.
What steps would I take to fix it?
Thanks for any help.

I'm having the same problem (except this isn't a new shuffle).
How do I "restart" an iPod shuffle? I have it plugged into my MacBook Air via its dock but it's not recognized in iTunes. iTunes does recognize my iPad (under Devices). Yesterday the MBA recognized both devices. I tried it also on iTunes on my Mini but no go there either.
I've rebooted both machines. No go.

Video problems with 5th Gen iPod

I've got a bit of a problem here. I've got a 60 gb 5th gen, and I've had no problems, thus far. I've got it loaded with tv shows, movies, music, podcasts, etc, and they have always worked fine. However, within the last few days, suddenly my video folders are empty. My movies and everything are still shown to be on the iPod under iTunes, but when disconnected from the computer and browsed, all the Video folders are shown as empty.
Has anyone experienced similar? Is there a way to fix this without losing all of those converted video files? Seven seasons of Star Trek Voyager took me like two weeks to convert!
PC Windows XP Pro

Same thing with me, i cleared my iPod and they went back on. But now it will only play my video podcasts. If it is any other type of movie file it will go to a black screen for about 10 sec then go back to the previous menu.

MOVED: Problems with MS-1722 Barebones build.

This topic has been moved to MSI Notebook.
https://forum-en.msi.com/index.php?topic=125421.0

Thank you for your response and sorry for the length
of code,
Thats was my first idea that it was asking for
or something I dont have but I checked my database and
I dont have any unusually large data entries (most
between 8-15 letters, the others are numbers) could it
be something wrong with how I've entered the database
in MsAccess, or am i barking up the wrong tree again!
Many thanks
RobI think you've misunderstood me. This has nothing to do with unusually large data entries, but rather the opposite. You are wrongly expecting data that is shorter than you think. When you call rs.getString(i) to retrieve a column value of a field, and you only want the first 5 characters in the column (instead of 10 or whatever the column size is), you would do something similar to the following:
String column_value = rs.getString(1).subtstring(0,5);The above expects a String that is at least 5 characters. Your problem is when your column value returned is less than the specified substring index ( in this case 5 ) it will throw an exception. If you changed your code to this, the error will not occur:
String column_value = rs.getString( 1 ).subtstring( 0, 5);
if ( column_value.length() > 5 )
column_value = column_value.substring( 0, 5 );
}Jamie

MOVED: Problem with CPU Voltage

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=140957.0

I have similar issues, it's hard to tell which measurement is the most accurate, there are 2 different measurements in the control center that don't match up with the figures set in the bios. The only way to be sure would be to get an expensive accurate multimeter but If you're only interested in running a stable overclocked computer without knowing the exact figures then get the computer running stable and lower the voltages until it starts to become unstable with prime95,
Or you could work the other way round, set the voltages so it boots but doesn't run prime95 for long, then raise the vcore and vtt one at a time until your happy with the length of time prime95 runs without errors. I'd be happy with 24 hours, I seem to remember errors creeping in at around the 9 hour mark on the setting below what I have it set to now.

MOVED: Problem with Marvell SATA III ports

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=143558.0

Quote
The problem appears to be the drive (WD WD1002FAEX 1TB).
It is a firmware issue with the HDD (or the drive itself is faulty). WD may have a fix for it. Your revision is possibly a 01 series, & the 05 series work fine. I will search for the thread with the exact revisions details & edit my post with it.
Quote
They found that there are two versions of WD1002FAEX in the market. They are with firmware version either 01.01v01 or 05.01D05. The Marvell chipset can detect SATA III (6Gb/s) for the WD1002FAEX with 05.01D05 but only 3Gb/s for WD1002FAEX with 01.01v01.

MOVED: Problem with K8N Neo4 Platinum and Vista Ultimate

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=110040.0

Set the Maxtor hard drive to be a Sata I instead of Sata II hard drive with a jumper. Also make certain that the Sata controllers in Integrated Peripherals-IDE Devices Configuration are enabled.

MOVED: Problem with OC Genie II Overclock on Z77-GD55

Similar Messages

Maybe you are looking for