MOVED: Problem with p7n diamond please help

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=122454.0

Dadilo, you have gone to some length but sadly no positive result, but at least you have cleared some of the ifs and buts. i have looked at your mobo bios even so it says it supports your cpu q6600 it seems there has been a few updates (see links, particularly please pay attention to the pointer in pictures). you have these options left to you.
1- put the pc on it's side and take the 240 volt plug out (no power what so ever) and clear the way from any cables etc.. and remove the mobo battery with a Small screw driver (push the clip to one side the battery pups out) and hold it in your Palm for ten second or so then put it back and put everything back make sure the single memory is firmly in place so is the graphic card. then connect the power and all cables etc the power the pc.
2-your last option before you give up is try another cpu on the mobo preferably core 2 duo rather than quad and if you get it working your next move is to update the bios and i do not know how good you are in updating bios???. if none of these works then sadly the mobo is faulty in my opinion but i may be wrong :
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot037.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot038.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot039.jpg

Similar Messages

Problem with p7n diamond please help

i have a new p7n diamond
i connect the power supply plugs, hard drives, video card(n260gtx new too), etc
when i push the power button the processor cooling fan run but the pc do nothing
don't gave me any beep from a bad connection
nothing
it just don't start
other thing
when i plug the video card power, the video card cooling fan don't start yet
please help!
basic from my PC
intel core 2 quad
2 hard drive 500gb
4g ddr
n260gtx 896mg

Dadilo, you have gone to some length but sadly no positive result, but at least you have cleared some of the ifs and buts. i have looked at your mobo bios even so it says it supports your cpu q6600 it seems there has been a few updates (see links, particularly please pay attention to the pointer in pictures). you have these options left to you.
1- put the pc on it's side and take the 240 volt plug out (no power what so ever) and clear the way from any cables etc.. and remove the mobo battery with a Small screw driver (push the clip to one side the battery pups out) and hold it in your Palm for ten second or so then put it back and put everything back make sure the single memory is firmly in place so is the graphic card. then connect the power and all cables etc the power the pc.
2-your last option before you give up is try another cpu on the mobo preferably core 2 duo rather than quad and if you get it working your next move is to update the bios and i do not know how good you are in updating bios???. if none of these works then sadly the mobo is faulty in my opinion but i may be wrong :
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot037.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot038.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot039.jpg

Weirdest problem with ipod!PLEASE HELP ME!!!

Okay, i tried to load a playlist that had about 100 songs on it. While its loading, the update just stops. My ipod starts going crazy.The apple logo keeps lighting up and then the light doesnt come on but the logo is still there. You can hear the inside of it like trying to come on but then it just keeps doing the same thing til the battery life runs out! I really need help on this! I've tried to reset but everytime I do it it just keeps doing the same thing. I dont know if i should wipe all my songs off of itunes or what but im so confused and so aggravated with it. PLEASE HELP ME! I'D REALLY APPRECIATE IT!
Windows XP

Welcome to Apple Discussions!
See if any of these help...
iPod Only Shows An Apple Logo and Will Not Start Up
iPod Only Shows An Apple Logo
btabz

Serious problems with El7/8: please help!

Hello all,
I really hope someone can help me-I've had no luck whatsoever with the customer support team.
I have been using El 3 very successfully for a couple of years. I recently upgraded to El 7 in order to be able to edit HD video and SD video together. The software works fine, however if I come to move multiple clips at once along the timeline, I get the black circle with a line through, and a small white box. This means I cannot move multiple clips. For me, this makes the product unusable.
I downloaded the trial for El8 and was please that this bug was not present. I have since ordered El 8 and installed it (a fresh install ith El 7 gone), however I have discovered that with this I cannot play any video in the monitor window! Again, this renderes the produce useless. I now have two pieces of software that are unusable, and I am receiving no help whatsoever from technical support. Please, can anyone assist?
James

James
First thing to try...with Premiere Elements 8, Edit Menu/Preferences/General and uncheck "Enable GPU Playback". If that does not help, then check out the AdobeTech Note:
http://kb2.adobe.com/cps/515/cpsid_51526.html
Now, in the case of Premiere Elements 7, could you please go into detail about how you are "moving multiple clips along the Timeline"? Are you working on one track or mutiple tracks? How are you grouping these clips prior to the move? Where are you moving them to and from? Etc.
ATR
Hi there,
Thanks for your help. The GPU settings was the first thing I tried-to no avail. Alas, no such luck either with theTechNote.
RE: el 7, I have been filming several scenes for a short film with the drama group I work with. Due to outside circumstances I have been editing back to front (so the last scene is currently at the beginning of the timeline etc.) What I am trying to do is select the clips and shift them to the correct sequential order on the timeline. I have tried highlighting all of them and clicking group, and simply tried dragging them as one big highlighted block. The clips are on seperate tracks, but I have never had any such problems with El 3 which I have used extensively in the past.
What is of particular interest, is that if I select sauy 6 tracks there's not a problem, it's when i select ALOT of tracks I run into difficulty.
I have also tried updating the graphics drivers recently for my GTX 285, which seemed to solve the problem on EL 8, only for it to then go back to what it was doing?!?
Any help would be appreciated

Stability Problems with P7N Diamond Continues

Big bummer. I've had this system since April, took a month to get it working as the first board I ordered was bad, this one seems to be a bum board. I've came here and a few other places, but help has been kind of hard to find.
Here's what I got:
MSI P7N Diamond
Intel QX9650
2x 2GB mushkin DDR2 1066 (XP2-8500) Timings: 5-5-5-15 2T
I have 4 HD's: all are seagate baracudas: 250, 500, 750, 1TB
MSI NX8600GT1GEZ
At this point overclocking is out of the question. All I want is a reliable PC that runs to its specifcations. RMA-ing this board is a last resort as often enough the RMA boards aren't worth a crap anyway, dont know if this is just the case with lower-end boards, but I hate having to wait, and I'm really ticked about the whole thing.
The computer reboots at random, I've found "more stable" configurations, but usually the machine will not stay running for more than 24 hours without a reboot. The most stable configurations are with the official 1.2 BIOS, setting the NB to 1.250 v, CPU Volt: Auto, SB: Auto, DRAM: 2.10, and I have manually set the memory timings: CL: 5, trcd: 5, trp: 5, tras: 15, and Command Rate: 2T. The FSB Speed: 1333, and the DRAM Speed: 1066. Temps are normal, and range from about 100 F at idle, and 120 F load on the CPU.
The voltage on the CPU is on the high side on Auto, the QX9650 can run on as little as .98 v at stock and this board is giving it 1.23 v on auto. The board also tries to set the timings on the memory to 7-7-7-24, which I feel has something to do with it.
I'm not an overclocker, I don't know what all these voltages do, I've only changed settings that have either been reccomended or have a warning setting (ie turn red).
I'll try a beta BIOS if one is available, but I was unaware that this board doesn't fully support the 45-nm CPU's.
There is NOTHING wrong with any of the hardware (except the board perhaps), I've tried other memory, PSU, even RMA the CPU, does the same thing. Everything has been tested, every possibility I can imagine, this problem has been haunting this system for months, and I'm almost to the point of buying a cheap as board that has some credibility that my hardware will work.
This is my most critical computer, I do everything on it, but I didn't buy a $300 motherboard to have these problems, or find that my CPU scores half of what it should when it is running stock, everything on this board is below stock, benchmarks are way below what they should be.
I'm up for some ideas, suggestions, if needed, I'll RMA the board, but it the return board does the same thing, I've lost all my faith in MSI. My last system had a P4M900M2 and it kicked butt, and it's a $50 board! Go figure these boards are worse than imported cars.

Quote from: NovJoe on 27-September-08, 12:40:17
By means of instability, can you describe the symptons of events that happen?
Can I have a list of the PSU models and RAMs models which you have tested?
Have you try the hardware on another board? If you have done so, what are the results?
I have not tried any of my hardware on this board, I have tried other memory on this board, this is the only board I have avialable to me that support LGA775 so I'm stuck between a rock and a hard place on that. The memory I tired, couldn't tell you the exact model, but it was Apacer DDR2 800, and was listed under this board as tested memory, i do remember that much- if that helps any.
As far as overclocking, I was told that overclocking my rig would make it stable, which i feel in this case is a little more than bumping the FSB eitherway. But no this happens under "stock" settings. Orginally with the 1.0 BIOS the machine would sometimes give me a multitude of BSOD, CLOCK_INTERRUPT (A clock inttrupt was not recieved in a timely manner on a secondary processor), DRIVER_IRQ_NOT_LESS_OR_EQUAL.
Only way to get the machine to run "stable" is to severely underclock, with the FSB at 1137 and DRAM at 1034.
Other things. Benchmarks (SiSoft Sandra Lite 2007)
CPU: Drystone: 39000 MIPS / Whetstone: 28000 MFLOPS
Memory: 7 GB/sec (1066 with correct timings)
Both appear to be under par, CPU particularly, and in the event of tinkering, only see a jump in performance when adjusting the multiplier from 9 to 10.5, which isn't stable, stable enough to run a benchmark. So I'm not sure where the problem is.
This might help, the original thread from back in June.
https://forum-en.msi.com/index.php?topic=117779.0

Problems with P7N Diamond

Very Sorry if i upset you!
MSI P7N Diamond Ver: 1.1 with Bios 1.3
2x1 Gb Corsair xms2 PC2 6400 tested and works on same board but not this one.
2x500Gb Samsung F1
Win XP Pro SP3
cannot update bios to 1.4 from 1.3
Tried USB method, CD, Floppy even safe mode command prompt.....disabled everything but the drives with bios files( usb,cd,floppy) but it still it finds the disabled Hardisk and boots into windows.
Memory will not work in Dual channel...sometimes it boots but nothing on screen.
Single channel boots most times but after trying USB or CD method it sometimes does not boot into windows.
Tried online too but only comes up with 1.3 bios
MSI support is none existent or impossible to get any sense out of them...after repeating my name and email address several times over the telephone i am still not sure if they understood.
I have filled in the online report system 3 times over the last two weeks but no reply and nothing active in box although it says report complete after submitting.
Have tried all the ways stated on updating bios.
I have updated many bios's on various boards, ASUS, ASrock, Aopen, Biostar etc no problems! Even modded bios on Asus boards.

Quote from: stooper on 04-September-09, 06:04:06
Against my better judgment, I'm going to reply to this. By your own admission, the motherboard was functioning fine in single channel mode. Your issue only occurred under attempts to operate in dual channel mode. Considering the real world benefits of dual channel memory are arguably negligible, one could remark it's such a minor technical detail, that nobody need b infatuated over it.
Indeed, again by your own admission, the problems were resolved after you disassembled and reassembled the system with different cables. Since your arrival, you've been quick to hijack other threads, spew frustration and venom over your issue, and vent agitation against the trouble and bother with all this crap you've had to endure. Yet, all along, it seems there really was no defect at all on MSI's part.
You've taken the time to customize your profile avatar with a nice Leeds United animation, but can't be trifled to actually learn about how your equipment operates and how to troubleshoot and optimize it. So it's so long and farewell and thanks for nothing, hmph! That's quite a remarkable attitude.
Good luck with your future Asus adventures. Perhaps you'll be more satisfied with that choice, perhaps not. My sense is people with unhappy, wretched personalities will have the odds against them.
Oh, and please don't fool yourself that you have so much more of a life to live and real work to get done than anyone else here. You know nothing about the forum members here, but your demeanor reveals the type of life you have. I, for one, don't envy you one bit.
Take a look at reviews of this Motherboard you will see that most people come to the same opinion as myself.
As for poor support it seems it is a bit hit and miss where ever you go. Some get good support some bad all from the same company.
I have a nice life living in the English countryside with lots of friends, a dog, three cats and nice girlfriend of many years. A massive garden full of fruit trees, fields full of horses both front and back and good neighbours.
Thanks for your good wishes and have a nice week-end your self.

I suppose it is the problem with socket connection,Please help

Hi,
I'm trying to build a chat server in Java on Linux OS.I've created basically 2 classes in the client program.The first one shows the login window.When we enter the Login ID & password & click on the ok button,the data is sent to the server for verification.If the login is true,the second class is invoked,which displays the messenger window.This class again access the server
for collecting the IDs of the online persons.But this statement which reads from the server causes an exception in the program.If we invoke the second class independently(ie not from 1st class) then there is no problem & the required data is read from the server.Can anyone please help me in getting this program right.I'm working on a p4 machine with JDK1.4.
The Exceptions caused are given below
java.net.SocketException: Connection reset by peer: Connection reset by peer
at java.net.SocketInputStream.SocketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:119)
     at java.io.InputStreamReader$CharsetFiller.readBytes(InputStreanReader.java :339)
     at java.io.InputStreamReader$CharsetFiller.fill(InputStreamReader.java:374)
     at java.io.InputStreamReader.read(InputStreamReader.java:511)
     at java.io.BufferedReader.fill(BufferedReader.java:139)
     at java.io.BufferedReader.readLine(BufferedReader.java:299)
     at java.io.BufferedReader.readLine(BufferedReader.java:362)
     at Login.LoginData(Login.java:330)
     at Login.test(Login.java:155)
     at Login$Buttonhandler.actionPerformed(Login.java:138)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1722)
     at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:17775)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:4141)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:253)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:261)
     at java.awt.Component.processMouseEvent(Component.java:4906)
     at java.awt.Component.processEvent(component.java:4732)
     at java.awt.Container.processEvent(Container.java:1337)
     at java.awt.component.dispatchEventImpl(Component.java:3476)
     at java.awt.Container.dispatchEventImpl(Container.java:1399)
     at java.awt.Component.dispatchEvent(Component.java:3343)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3302)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3014)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2967)
     at java.awt.Container.dispatchEventImpl(Container.java:1373)
     at java.awt.window.dispatchEventImpl(Window.java:1459)
     at java.awt.Component.dispatchEvent(Component.java:3343)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:439)
     at java.awt.EventDispatchThread.pumpOneEvent(EventDispatchThread.java:150)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:131)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
     My program looks somewhat like this :
1st class definition:
public class Login extends Jframe// Login is the name of the first class;
Socket connection;
DataOutputStream outStream;
BufferedReader inStream;
Frame is set up here
public class Buttonhandler implements ActionListener
public void actionPerformed(ActionEvent e) {
String comm = e.getActionCommand();
if(comm.equals("ok")) {
check=LoginCheck(ID,paswd);
test();
public void test() //checks whether the login is true
if(check)
new Messenger(ID);// the second class is invoked
public boolean LoginCheck(String user,String passwd)
//Enter the Server's IP & port below
String destination="localhost";
int port=1234;
try
connection=new Socket(destination,port);
}catch (UnknownHostException ex){
error("Unknown host");
catch (IOException ex){
ex.printStackTrace ();
error("IO error creating socket ");
try{
inStream = new BufferedReader(new InputStreamReader(connection.getInputStream()));
outStream=new DataOutputStream(connection.getOutputStream());
}catch (IOException ex){
error("IO error getting streams");
ex.printStackTrace();
System.out.println("connected to "+destination+" at port "+port+".");
BufferedReader keyboardInput=new BufferedReader(new InputStreamReader(System.in));
String receive=new String();
try{
receive=inStream.readLine();
}catch(IOException ex){ error("Error reading from server");}
if(receive.equals("Logintrue"))
check=true;
else
check=false;
try{
inStream.close();
outStream.close();
connection.close();
}catch (IOException ex){
error("IO error closing socket");
return(check);
// second class is defined below
public class Messenger
Socket connect;
DataOutputStream outStr;
BufferedReader inStr;
public static void main(String args[])
{ Messenger mes = new Messenger(args[0]);}
Messenger(String strg)
CreateWindow();
setupEvents();
LoginData(strg);
fram.show();
void setupEvents()
fram.addWindowListener(new WindowHandler());
login.addActionListener(new MenuItemHandler());
quit.addActionListener(new MenuItemHandler());
button.addActionListener(new Buttonhandle());
public void LoginData(String name)
//Enter the Server's IP & port below
String dest="localhost";
int port=1234;
int r=0;
String str[]=new String[40];
try
connect=new Socket(dest,port);
}catch (UnknownHostException ex){
error("Unknown host");
catch (IOException ex){
ex.printStackTrace ();
error("IO error creating socket ");
try{
inStr = new BufferedReader(new InputStreamReader(connect.getInputStream()));
outStr=new DataOutputStream(connect.getOutputStream());
}catch (IOException ex){
error("IO error getting streams");
ex.printStackTrace();
String codeln=new String("\n");
try{
outStr.flush();
outStr.writeBytes("!@*&!@#$%^");//code for sending logged in users
outStr.writeBytes(codeln);
outStr.write(13);
outStr.flush();
String check="qkpltx";
String receive=new String();
try{
while((receive=inStr.readLine())!=null) //the statement that causes the exception
if(receive.equals(check))
break;
else
     str[r]=receive;
     r++;
}catch(IOException ex){ex.printStackTrace();error("Error reading from socket");}
catch(NullPointerException ex){ex.printStackTrace();}
} catch (IOException ex){ex.printStackTrace();
error("Error reading from keyboard or socket ");
try{
inStr.close();
outStr.close();
connect.close();
}catch (IOException ex){
error("IO error closing socket");
for(int l=0,k=1;l<r;l=l+2,k++)
if(!(str[l].equals(name)))
stud[k]=" "+str[l];
else
k--;
public class Buttonhandle implements ActionListener
public void actionPerformed(ActionEvent e) {
//chat with the selected user;
public class MenuItemHandler implements ActionListener
public void actionPerformed(ActionEvent e)
String cmd=e.getActionCommand();
if(cmd.equals("Disconnect"))
//Disconnect from the server
else if(cmd.equals("Change User"))
     //Disconnect from the server & call the login window
else if(cmd.equals("View Connection Details"))
//show connection details;
public class WindowHandler extends WindowAdapter
public void windowClosing(WindowEvent e){
//Disconnect from server & then exit;
System.exit(0);}
I�ll be very thankful if anyone corrects the mistake for me.Please help.

You're connecting to the server twice. After you've successfully logged in, pass the Socket to the Messenger class.
public class Messenger {
    Socket connect;
    public static void main(String args[]) {
        Messenger mes = new Messenger(args[0]);
    Messenger(Socket s, String strg) {
        this.connect = s;
        CreateWindow();
        setupEvents();
        LoginData(strg);
        fram.show();
}

I have a problem with my microphone, please help if you can

Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.

Originally Posted by tav2000
Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.
Hi tav,
While waiting for other forum members to post..
Perhaps you havent installed the latest drivers yet? (link HERE)
Cheers!

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

PROBLEM WITH NEW ROW --- PLEASE HELP

Hello,
I've had it with the framework. It's been 20 hours and counting that I am trying to insert/validate a new record.
Things just don't work as advertised.
Here's the situation:
I have an entity object with various validation rules in the validate() method.
Then I have a simple JSP page to insert new records.
At submit of button, I follow the framework's default
create new row and fill it up, with the difference
that i need to validate the row as soon as I fill it up
with data from the http request:
<jbo:OnEvent name="Create">
<jbo:Row id="newrow" datasource="ds" action="CreateInRange" >
<% try { %>
<jbo:SetAttribute dataitem="*" />
<%
newrow.validate(); //******* NOTICE HERE THAT I VALIDATE
} catch (JboException ex) {
newrow.remove();
throw ex;
} %>
</jbo:Row>
</jbo:OnEvent>
Unexpected behavior 1: If the validation fails,
newrow DOES NOT GET REMOVED!!!! I know this
since when I view data thru a data table component,
the row is there WITH THE ERROR INFORMATION set!!.
If I do a commit transaction, then the erroneous information ENDS UP IN THE DATABASE!!!!!
Unexpected behavior 2: If I do a rollback, every
call to subsequent pages results in a jsp error:
java.lang.ClassCastException: oracle.jbo.html.jsp.datatags.OnEventTag
PLEASE HELP.
Chris Lambrou

I have (hopefully) found a solution to my part of this problem. I was getting the ClassCastExceptions on any page with a <jbo:row> tag after doing a failed DML action. I have tested this with the delete event. (btw, I am using jdev9.0.3.3 w/ BC4J/JSP) Before what I was doing was this:
<% try { %>
<jbo:Row id="delrow" datasource="ds" rowkeyparam="jboRowKey" action="Delete" />
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
If I removed the try/catch block everything worked fine. Unfortunatlely, I need to try/catch block here. To work around the problem I changed the code to this:
<% Row rowDelete = ds.getRowFromKey(params.getParameter("jboRowKey")); %>
<% try { %>
<%
rowDelete.remove();
%>
<% } catch (JboException jboEx) { %>
do something
<% } catch (Exception ex) { %>
uh-oh, this is bad
<% } %>
The second bit of code does the same thing (but it doesn't use a bean like I think <jbo:Row> does) and it doesn't cause the ClassCastError on subsequent errors.
I really hope this helps someone else because it took me forever to get a workaround!
~Rob Lundeen

Problem with "Package Spec" please help.

Hello once again.
I'm developing a master-detail form, so I'm using a "Package Spec" variable to hold the primary key value from the master form. The primary key value for the master is generated by a sequence.
Here's the package spec:
PACKAGE primary_keygen IS
pkey varchar2(15);
END;Now the master table has the following "Before Insert" Trigger .
CREATE OR REPLACE TRIGGER MASTER_NUM_GEN
BEFORE INSERT
ON MASTER
FOR EACH ROW
DECLARE
primary_key_value varchar2(15);
BEGIN
select lpad(to_char(ref_gen.nextval), 4,'0')
into primary_key_value from dual;
primary_keygen.pkey:='ABC/'||primary_key_value;
:new.Ref_Number:=primary_keygen.pkey;
END;For the detail block. I have the following "Before Insert Trigger" to generate the primary key values.
CREATE OR REPLACE TRIGGER DET1_NUM_GEN
BEFORE INSERT
ON DETAIL1
FOR EACH ROW
BEGIN
if :new.M_ref_number is NULL THEN
:new.M_ref_number:=primary_keygen.pkey;
ENd if;
END;Works quite fine if I have only one detail block. But if I have multiple detail blocks. Depending on the user's selection. i.e. After entering data into the master block, the user selects a detail block ('Letter type'- using stacked canvases for this purpose and radio buttons for selecting the view) and then Inserts data into it. here's what I do in the Detail block2.
CREATE OR REPLACE TRIGGER OREF_NUM_GEN
BEFORE INSERT
ON DETAIL2
FOR EACH ROW
BEGIN
if :new.O_ref_number is NULL THEN
:new.O_ref_number:=pkey_gen.master_key;
ENd if;
END;Now the problem is that When I enter one record into detail1, works fine, but for the second time, when I try to insert another record. the master table gets a new reference number (primary key value) while the detail block gets the previous value that was used in the first record!, so that means 'pkey_gen.master_key' is holding the old value, while in my opinion it should hold the new value, I dont know whats wrong here. If I try to insert two consecutive records into the same detail table, I get an error saying "Unique Constraint voilated", becuase the variable is holding the old values.
And lastly after it inserts the record into the database, I get a dialog box saying, "successfuly inserted 2 records into the database" and when I click ok, the Form closes by itself, any ideas on how to stop this?
I'm really stuck here. Please help me out on this.
Thanks.
Note: I'm using Form6i with Database 10g.
Message was edited by:
fahimkhan82

Hi,
Maybe the best way to start is to try building a new form from scratch. For simplicity I will assume that you have one master and one detail table. Master table has a primary key and the detail table has a foreign key to the master. Based on this, with the forms you can create a database block based on your master table. Use the wizard. Again using the wizard, create a second block based on the detail table. You'll see a screen to prompt to create a relationship. Create one by selecting the master table and the right foreign key relation. Now take a close look to all triggers automatically created by the form. Also check the "Relations" object found in you master block object tree. Note that the foreight key column in the detail table has the "Copy Value From Item" property set to monitor the master block's primary key.
This is the basic. You don't need the database triggers, except (in case you want to insert through, say, SLQPlus) the one for the master table, which will look like this:
CREATE OR REPLACE TRIGGER MASTER_NUM_GEN
BEFORE INSERT
ON MASTER
FOR EACH ROW
BEGIN
IF :new.ref_number IS NULL THEN
select 'ABC/'||pad(to_char(ref_gen.nextval), 4,'0')
into :new.ref_number
from dual;
END IF;
END;
Now you have to take care about the inserts in your form. Create PRE-INSERT trigger on the master block.
IF :master.ref_number IS NULL THEN
SELECT 'ABC/'||pad(to_char(ref_gen.NEXTVAL), 4,'0')
INTO :master.ref_number
FROM dual;
END IF;
Run the form and explore different situations to see how the form is keeping the data integrity.
Compile with Shift+K (incremental). Sometimes forms blow just because not all of the trigers were compiled properly.
Hope this helps...

Having problems with Frontrow. Please help!

Hi,
i've been trying to figure this out all day today but i haven't found any solution. hopefully you Mac Geniuses can help. now, my problem isn't that my videos won't play, because they do. they all play perfectly. okay, so when i launch Frontrow, all my video files appear under their respective folders; my TV Shows appear under the TV Shows folder and my Music Videos appear under the Music Videos folder. however, for some strange reason, these files also want to appear under the Movies folder. That means they're showing up twice! -under the Movies folder and TV Shows/Music Videos. is there anyway to fix this, because it's really cluttering my Movies folder and i admit i'm a really anal neat-freak.
Also, i have correctly labeled the video files as Movie, TV Show or Music Video under iTunes. Everything is organized well under iTunes, so i doubt it's that.
please help!!
Message was edited by: ec84

It might be because with the new update, it seems as though anything stored in the MOVIES folder , shows up under movies in Front Row. I have a folder of Transformers AVI'S in my movie folder, now it shows up in the movie directory of front row

Messaging Problem with 3.0 Please Help

I upgraded to 3.0 and now 3GS. Prior to this my wife was able to text me from her verizon blackberry, no issues and it came in on the iphone messaging. Now, somehow the iphone is changing it into an "email". The text appears as her [email protected] It's not a real email because it's not appearing in my home outlook server which is where the iphone pulls my emails from. This is way inconvient since the text doesn't appear till i go manually pull email. Anyone else have these issues. She didn't do anything different, just texts to my phone #? Techies please help.
Paul in San Diego

Hi Omid,
As far as I am aware of you will need to have a two way trust to proceed with the integration.
Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
the thread.

Connection problems with WRT54G Router PLEASE HELP!!!!

Hello all,
Im having a huge issue and im hoping that someone can help me. Awhile ago i changed what i believe to be my router settings using 192.168.1.1 and i believe i added WEP secuirty. I changed my password i know that much. Anyway my problem is this - When i try connecting a router to my computer, i cannot access the internet OR the 192.168.1.1 setup. I just get a yellow caution sign on my wireless settings (running Windows 7), but when i connect my cable modem (Comcast) to my computer, i can access the internet. I have reset both the router and my cable modem MANY times (hard resets) and STILL cannot get the setup page for the router. I have TWO WRT54G rourters and BOTH do the same thing when connected to my desktop , yet BOTH work fine on an old machine running XP, so it is something i did with this computer. Can someone please help me solve this issue? any hlep would be appreciated as i am stumped and do not know how to fix this and cannot use WI-FI or my Xbox 360 until i can fix this..Thanks.

Check the IP address of your computer and see if it's in range with the router's IP.
To learn how to do so, click here.

I'm having problems with my ringtones please help

I have tried everything to fix my BB Curve problem even down to the battery.   I have custom ringtones set for my husband and other family members. So whenever they call or text I know who it is.. Now my issue is that if I get a text from my son his ringtone will sound than if I get a standard text my son's ringtone will go again. Not the default for just regular ringtones. I took off my facebook becuase someone said that could be a problem. Verizon sent me a new phone and I entered everything manually so if there was something wrong I wouldn't transfer the problem to the new phone. It's not fixed. If someone could please help me. I'm getting ready to turn my BB off completely it's that frustrating. Thank you for any help.

It sounds as if you are saying that any "non-specific" SMS sender receives that text tone of the last one you have set a personal tone for who has texted you?
I don't know. I can only say that if you use those instructon in the guideline, they work.
There is a user here named Cathlabnurse, she has a good understanding of these settings... Maybe you could send her a Private Message to review your settings with you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

MOVED: Problem with p7n diamond please help

Similar Messages

Maybe you are looking for