MOVED: Problems with GTX 675M

This topic has been moved to MSI Notebooks & Netbooks.
https://forum-en.msi.com/index.php?topic=173064.0

I honestly think it comes down to a process problem via NVidia. Similar to the older 9XXX mobile series chips that had issues from manufacturing as well. That was a huge debacle that NVidia had to pay their way out of back in the day. I think the 67XM series is similar to that, but I doubt it will ever be proven, as it doesn't seem as widespread.

Similar Messages

  • GT70 with GTX 675M Video TDR failure

    This is my second failure of the 675m.  I purchased my GT70-OND-444 in April 2013.  The first 675m with 2gb failed after 5 months, sent it in for RMA, they put in a newer 675m with 4GB memory.  Ran flawlessly up until last week, kept getting the NVidia kernel error along with the BSOD with VIDEO_TDR_FAILURE (nvlddmkm.sys).   Googled around, seems this is not unusual with the 675m card. 
    Fortunately it is still under warranty, so I can send it in to repair.  Hopefully MSI won't put another 675m in, or NVidia will fix their drivers so it won't burn out this graphic card if that is what is causing the failure. 
    And yes, I tried several different graphic drivers, used the DDU cleaner, updated BIOS, but every 3d game locks up after a few seconds upon entering the game environment.  Just wanted to let others know if they are having similar problems with their 675m, there must be something wrong with either the card or the NVidia drivers for this to be happening so frequently.   

    I honestly think it comes down to a process problem via NVidia. Similar to the older 9XXX mobile series chips that had issues from manufacturing as well. That was a huge debacle that NVidia had to pay their way out of back in the day. I think the 67XM series is similar to that, but I doubt it will ever be proven, as it doesn't seem as widespread.

  • MOVED: Problem with SATA DVD/RW

    This topic has been moved to AMD64 nVidia Based board.
    Problem with SATA DVD/RW

    I use the Plextor PX-712SA's with no issues. However...I do not believe the SATA versions require jumpers. Try plugging them in on SATA port 1 or 2, making sure those are enabled in BIOS of course. Make sure all connections are secure. There have been some issues with these particular drives not operating properly, but it has not been an issue with seasoned system builders, so the problems may be with the builder himself. Usually, Plextors are so good, they'll almost burn a paper plate! Try a different medium, maybe another brand of blank CD or DVD.
    You may also want to check Device Manager in Windows, to see if it is listed "This device is working properly"!

  • Cs6 problems with gtx 780 cuda

    hey i have problems with cuda with my gtx 780 when i try to see my cuda version in after effects i cant see the cuda setting and in premier pro i cant enable cuda acceleration i have added pictures

    Hi Oriagranat9,
    Please check the links below for the supported cards on Premiere Pro & After effects CS6.
    http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.html#Ad obe%20Premiere%20Pro%20CS6%20system%20requirements
    http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-effects.html#After Effects CS6 system requirements
    make sure that for CUDA/Ray tracing you are using one of the cards listed on the pages.
    Thanks

  • MOVED: Problems with IDE drives being recognized in Vista

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=105881.0

    This is a known problem with Internet Exploder 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • MOVED: Problem with OC

    This topic has been moved to Overclockers & Modding Corner.
    Problem with OC

    Quote
    Originally posted by Deathstalker
    What kind of Hard Drives are you running? Where are they connected?
    I would also try loosening the timmings on the RAM, try 3.4.4.8.
    Take Care,Richard
    My sata I have connect on 3, ram I was try to run on 3-3-3-6 1:1 and too 166mhz, stll prime get down.

  • Problem with gtx 580 lightning total available graphics memory

    i got a problem with total available graphics memory with my gtx 580, it shown 3315MB only in nvidia control panel.. but i just saw people with same gpu with me has 4000+MB..
    can someone help me please, i need to increase it to 4K+MB
    my mobo is asus p8z68-v
    and 4GB of RAM 2GBx2
    CPU: i7 2600k

    Quote from: limousine on 14-October-11, 19:17:12
    i got a problem with total available graphics memory with my gtx 580, it shown 3315MB only in nvidia control panel.. but i just saw people with same gpu with me has 4000+MB..
    Nvidia panel displays complete rubbish.
    They also count some system memory with the amount of vga memory, which, with dedicated videocards these days, is to no point, since the card will never be able to use it.
    Your card has, like Svet already said, 3072MB dedicated videomemory and thats all its gonna utilize, since thats the amount of VRAM on the pcb.
    So your buddies with 4+GB VRAM are just showing off stuff they cant use and Nvidia controlpanel shows numbers and amounts of VRAM, you'll never have available, just like that stupid Windows Performance Index shows some numbers about your system that in reallife mean diddlysquad.
    Besides, there arent any 580GTX's outthere with more then 3GB VRAM aboard.
    Long story short, dont get all hyped up by numbers, you got what you paid for and there's nothing wrong with your amount of memory on that card.
    Edit:
    With my system Nvidia says I got 3071MB of video-memory available, but 1280MB is dedicated, dedicated being the true amount the card wil ever use, since my card has only 1280MB and not 3071MB.
    Like I said they count some system-memory with it, although the card will never ever be able to use it, its just to screw people over.

  • Upgrading MSI gt70 that came with GTX 675m to GTX 780

    Hello everyone : D
    I´m wondering, is it possible to upgrade just my GTX 675m to the new GTX 780 on my GT70 0ND?
    THANX!

    GTX780 is a desktop vga so that is impossible. If you mean GTX780M it's a gamble: https://forum-en.msi.com/index.php?topic=160999.0

  • MOVED: Problems with MS-1722 Barebones build.

    This topic has been moved to MSI Notebook.
    https://forum-en.msi.com/index.php?topic=125421.0

    Thank you for your response and sorry for the length
    of code,
    Thats was my first idea that it was asking for
    or something I dont have but I checked my database and
    I dont have any unusually large data entries (most
    between 8-15 letters, the others are numbers) could it
    be something wrong with how I've entered the database
    in MsAccess, or am i barking up the wrong tree again!
    Many thanks
    RobI think you've misunderstood me. This has nothing to do with unusually large data entries, but rather the opposite. You are wrongly expecting data that is shorter than you think. When you call rs.getString(i) to retrieve a column value of a field, and you only want the first 5 characters in the column (instead of 10 or whatever the column size is), you would do something similar to the following:
    String column_value = rs.getString(1).subtstring(0,5);The above expects a String that is at least 5 characters. Your problem is when your column value returned is less than the specified substring index ( in this case 5 ) it will throw an exception. If you changed your code to this, the error will not occur:
    String column_value = rs.getString( 1 ).subtstring( 0, 5);
    if ( column_value.length() > 5 )
    column_value = column_value.substring( 0, 5 );
    }Jamie

  • Z77A-G43 PCIe 3.0 problem with GTX 660

    Hello,
    I have built a new computer with the components described above.
    There is no video signal output from my GTX 660 when it's connected to the PCIe 3.0.
    It's OK when the GTX 660 is connected to the PCIe 2.0.
    When GTX 660is connected to PCIe 3.0 there is no signal output even from the onboard video card.
    That's mean I don't see bios display or Windows, it's not a windows 7 problem.
    Sometimes after connected GTX 660 to the PCIe 3.0, the bios stop and start few times the computer, always without video signal anywhere.
    Then It's seems that Windows 7 boot (without display), but there is no sound when Windows 7 is loaded or when I quit Windows 7 (I enter blindly my password, then do Alt-F4 and enter , and Computer stop).
    I try to reset CMOS, setting in the bios PEG or IGD but nothing good.
    The bios version was 2.8, I flash it to E7758IMS.293 but same problem.
    This GTX 660 is a PCIe 3.0 compliant !
    Any idea ?
    Thx for your help

    Quote from: mastermylord on 24-February-13, 03:31:09
    i use i7 2600
    http://ark.intel.com/products/52213/Intel-Core-i7-2600-Processor-8M-Cache-up-to-3_80-GHz
    PCI Express Revision : 2.0
    p.s.
    You don't need PCI-E 3.0 for GTX 660.
    The PCI-E 2.0 bandwidth is more than enough for your GPU.

  • MOVED: Problem with Marvell SATA III ports

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=143558.0

    Quote
    The problem appears to be the drive (WD WD1002FAEX 1TB).
    It is a firmware issue with the HDD (or the drive itself is faulty). WD may have a fix for it. Your revision is possibly a 01 series, & the 05 series work fine. I will search for the thread with the exact revisions details & edit my post with it.
    Quote
    They found that there are two versions of WD1002FAEX in the market. They are with firmware version either 01.01v01 or 05.01D05. The Marvell chipset can detect SATA III (6Gb/s) for the WD1002FAEX with 05.01D05 but only 3Gb/s for WD1002FAEX with 01.01v01.

  • MOVED: Problem with K8N Neo4 Platinum and Vista Ultimate

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=110040.0

    Set the Maxtor hard drive to be a Sata I instead of Sata II hard drive with a jumper.  Also make certain that the Sata controllers in Integrated Peripherals-IDE Devices Configuration are enabled.

  • Problem with GTX 560Ti Twin Frozr II OC SLI

    Hi. I just bought another GTX 560 Ti Twin Frozr for SLI and when I ran BF 3, the images are shaky. Here's my specs:
    i7 920 2.66GHz
    Asus P6T
    6 x 2GB Corsair 1600 DDR3
    2 x GTX 560Ti Twin Frozr II
    1TB Seagate Barracuda 7200
    Windows 7 Pro 64bit
    Cooler Master Silent ProM 850W
    I'm using the 290.36 beta driver (the others failed as well).
    My motherboard BIOS is the latest version (1408). My GPUs have different BIOS (I bought the first in Feb and the new one today), is that the issue? The problem isn't just in BF 3, I also have it in Skyrim.
    Thanks!

    Quote from: Keno117 on 12-December-11, 03:15:23
    hi svet. yeah, the problem doesn't appear with fraps screen shots.
    this mean that issue is caused by your monitor. [or sli brigde issue]
    have you tested each vga alone?

  • P67A-GD55 problems with GTX 780

    I have the same problem as the guy in this thread:
    https://forum-en.msi.com/index.php?topic=169438.0
    I can´t access the BIOS with the GTX 780. I just get a black screen with B2 code for 2-3 minutes and then
    it boot up windows.
    I have used Live Update 5 to upgrade to the latest bios (Live Update says the new 1.J0 version is the latest)
    but the problem is still there.
    If i want to access the BIOS i have to switch the cards :(
    My system:
    I7 2600k
    P67A-GD55
    2 x 4 Corsair DDR3
    GTX 780 (previous card was a GTX 580)
    Win 7 64-bit
    Help would be much appreciated

    Quote from: Ywap on 04-June-13, 02:41:05
    I can´t access the BIOS with the GTX 780. I just get a black screen with B2 code for 2-3 minutes and then
    it boot up windows.
    New graphic cards need 4.XX bios.
    The last is 4.30 bios.
    You have to download the archive here : https://forum-en.msi.com/index.php?topic=164135.0
    An use this archive with   MSIQ USB Bootable tool downloadable here : https://forum-en.msi.com/index.php?topic=116721.0
    Use Method 1: Processing a BIOS Archive Directly (ZIP/RAR).
    Then clear CMOS.
    Then Reboot and SUPPR button to enter the bios
    Dont upgrade Intel Management Engine drivers to v8, because you have i7 2600K sandy bridge processor. Stay with IME v7 drivers
    Goog luck

  • MOVED: problem with z77a-g45 and gtx660tf

    This topic has been moved to MSI Video Cards.
    https://forum-en.msi.com/index.php?topic=170079.0

    Quote from: flobelix on 22-June-13, 22:13:17
    it is a hdmi issue happening with certain vga/monitor combination.
    Other combinations might work well but the combination of your monitor and your vga does not. As said before use a dvi to hdmi adapter and the problem is solved.

Maybe you are looking for

  • How do i remove an email account from the app store on my macbook?

    When my Macbook was set up at my company the tech updated Photobooth with his iTunes account email address. I want to get rid of his account and use mine. I can't find a simple solution on line. Suggestions please!

  • Why do I now have to "save" every pdf before I can open it?

    Since updating to Adobe Reader X (10.0.1) most pdf's that I try to open thru IE 8 have to be saved first ....  I thought I could uninstall Adobe Reader and perhaps re-install the older version that I had that worked ... not so.  When I try I get an e

  • Error in running rt.exec(command)

    Hey experts I don't understand the error that I got. My code is: openRTSPURL.addActionListener(new ActionListener(){                public void actionPerformed(ActionEvent e) {                     String command = ("cmd/e/Client/java Client");       

  • Has anyone gotten their monthly dukes???

    Hi, I love to give out dukes!! I wish i had more of 'em. So i have kept an eye on my account, waiting to see that "monthly" refresher. Is anyone getting their monthly dukes? Is this a practice they have stopped, but forgot to update their dukes bulli

  • I cannot open an email in "Search"

    I am unable to open an email after I have done a search for it. I type in the keyword or email address that I am searching for. This opens a separate tab. When I find what I am looking for, I double click on the email to open it but it won't open. I