Moved project and now can't open it in FCP X

In a moment's inattention I moved the project folder to a different location on my Movie Directory. Final Cut couldn't find it so I ppanicked and put it back. Still FCP X cannot find it. I am sure I haven't lost it as it appears in FCP X Project list but no frames are associated with it. Any and all advice gratefully received as always.
Many thanks
Richard

FCP is looking for a file with the name CurrentVersion.fcprproject.
Take a look at the location you moved the folder to and see whether it was inadvertently left behind. If not there, look in the folders within your project folder. If not there, try a Spotlight search.
Russ

Similar Messages

  • I have just agreed to software updates on my imac and now can't open my mail.  There is a message saying this version of mail isn't compatible with this latest software.  I have located the updated mail in the applications folder but it won't open. Help!

    I have just agreed to software updates on my imac and now can't open my mail.  There is a message saying this version of mail isn't compatible with this latest software.  I have located the updated mail in the applications folder but it won't open. I don't have the original operating software disk.  Does anyone have any suggestions?

    Your reply suggests that you have moved Mail to a different location, which (as I said) will prevent it from being properly updated. You cannot use Mail 4.5 with any recent version of Mac OS X. Mac OS X 10.7 (Lion) included Mail 5 and Mac OS X 10.8 (Mountain Lion) includes Mail 6. I'm assuming that you have either Lion or Mountain Lion, but if that is incorrect, you will need to provide that information.
    At this point, you will need to reinstall your system. Hold down command-R at startup and reinstall the system right on top of the old one. This should not disturb any of your documents or applications, though you should have backups beforehand in case something goes wrong. And at this point, with your system in an uncertain state (I don't entirely know what you have done to it), something could go wrong.
    You will also want to delete the old copy of Mail 4.5, wherever that is. You can't use it.
    In the future, do not move any of the preinstalled applications. Leave them where they are.

  • I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

    I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

    What file format did you export it to?

  • Did Itunes update and now can't open it. It tells me msvcr80.dll is not installed,

    Did update and now can't open itunes due error of msvc80.dll

    Hello Nailjack,
    Thank you for the details of the issue you are experiencing with iTunes.  I suggest removing iTunes and all related components and reinstalling iTunes for the issue you described.  The following article has steps to do this(it is important to remove all components in the order listed):
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    I recommend continuing with this article if you continue to experience issues with installing iTunes:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I've just installed Maverick and now can't open iPhoto. I have 9.2.1 currently installed. Am terrified I'm going to lose photos as they weren't all backed up. What do I do? Please help...

    I've just installed Maverick and now can't open iphoto. I have 9.2.1 currently installed. Please help - am terrified I've lost my photos as they weren't all backed up.

    Pogs78,
    first things first — buy an external drive to use as a Time Machine backup destination and make a back up. That way, you won’t lose anything which is currently on your MacBook Pro.

  • I tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    i tried to download the latest itunes update, but received an error and now can't open itunes at all. Help?

    Hello bajura007,
    Thank you for the details of the issue you are experiencing with installing the latest iTunes update.  I recommend following the steps below:
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
    You can find the full article here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Downloaded Yosemite and now can't open photoshop on Mac Book Pro?

    I have downloaded Yosemite on MacBook Pro and now can't open photoshop.
    I have updated Java but still no help.
    Anyone know anything about this please?

    If you updated the OS after Photoshop 5.x was installed, the nefarious Yosemite disjointed beast damaged your Photoshop installation.  Thank Apple for that.
    You need to UNinstall Photoshop again, look for, download and run the Adobe CS Cleaner Tool, Repair Permissions with Apple's Disk Utility, install Photoshop from scratch again, apply any and all available Photoshop updates, and ONCE AGAIN Repair Permissions with Apple's Disk Utility—in that precise order.

  • I worked on a trial of LR 5 on a catalog and now can't open my files in my LR4 after the trial has expired. How do I access my catalog now?

    I upgraded my LR4 catalog for a trial LR5 and now can't open my original LR4 catalog. What do I do to open my files?

    It sounds as if you are using  the Lightroom 5 version from the creative cloud, and you don't have a subscription. The Lightroom behavior you are describing is what happens when you don't have an active creative cloud subscription. Upgrading catalogs from Lightroom 4 to Lightroom 5 does not do anything to the original catalog if you can find and start Lightroom 4, you should be able to start right where you left off. But any new files that you imported into Lightroom 5 will not be there. They will be on your hard drive and you can import them again. But you are going back to a catalog that was used up until you installed Lightroom 5. Hopefully, you didn't uninstall Lightroom 4.

  • Downloaded Firefox 4 to my Mac OS10.5.8 and now can not open Firefox.

    Downloaded Firefox 4 to my Mac OS10.5.8 and now can not open Firefox. The processor is 1.25 GHz Power PC G4 and 768 MB DDR SDRAM memory. Is it possible to go back to an earlier version that was running very well on my Mac?

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

    Did latest update for itunes and now can't open Itunes. Get pop of :itunes was not installed correctly.Please reinstall itunes. Error 7 (Windows Error 126). Have reinstalled various times and still can't open itunes. Please help.

    Repair Apple Application Support.
    START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

  • Just updated to Yosemite and now can't open mail, or finder or others.  That wheel,just goes round and round

    i just updated to Yosemite and now can't open mail or finder or other apps.   Wheel just goes round and round

    I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

  • HT1199 I downloaded Lion and now can't open pages or keynote. Do I need to buy new apps?

    I downloaded Lion and now can't open pages or keynote. Do I need to buy new apps?

    No, you need to update them...
    SYSTEM PREFERENCES > SOFTWARE UPDATES..
    or...
    Support Downloads
    http://support.apple.com/downloads/

  • HT201328 how can i removed/unlocked the passcode of my iPhone? i forgot and now can't open my cel anymore

    how can i removed/unlocked the passcode of my iPhone? i forgot and now can't open my cel anymore?...thank you:-)

    Do as the manaul tells you to do and restore the iphone

  • I've just updated my iPad2 to iOS 5.1 and now can't open MyWallet where all my secure info and passwords are held. HELP

    I've just updated my iPad 2 to iOS 5.1 and now can't open MyWallet where all my secure info and passwords are filed. HELP!

    The app hasn't been updated in almost a year, so it may not be compatible with iOS 5 or 5.1. They have next to no support information on their web site, so you may need to email them:
    [email protected]
    The normal route for a single app that won't launch is to remove and reinstall it, but that would probably lose all your information unless you have it synched to a computer. I'd suggest contacting the developer.
    Update: their Twitter feed says that they've had to do a number of updates for iOS 5.1 to fix an issue that was crashing all their apps under 5.1, and have submitted them to Apple. So stay tuned for a while and look for an update.
    Regards.

  • Upgraded to maverick and now can't open excel projects

    I recently upgraded to maverick and now can't go back to open excel spreadsheets I need for my business. I've even changed the permissions and I can only preview, not modify. Any suggestions?

    Was just having this issue with my wife's computer after upgrading to Mavericks. Maybe a long shot, but if your filenames have forward slashes in them (such as for dates), change them to backslashes. No idea why but it works. I seem to recall having the same problem with Excel some time in the past and this was the solution then too.

Maybe you are looking for

  • Can't Scroll Inside Drop Down Menus

    I just got a new HP laptop (Windows 7 Home Premium 64 bit), installed Firefox 11 (now updated to 12), and discovered that when using the track pad (Synaptics Touch Pad v8.1. Driver provided by Synaptics, version 15.3.29.0 dated 10/13/2011), I can not

  • Power from firewire 800 to 400?

    I have an ADVC 55 analogu to digital video converter and it's powered through its FW400 cable. It has no FW800. If I get a cable or an adaptor to connect the ADVC55 to my MacBook Pro through the FW800 port, will the cable/adaptor carry the power too?

  • Sharing IPhoto library among multiple users

    I'd like to make sure that each of the user accounts on my Mac can easily access the same complete IPhoto library -- to add, edit and remove photos, and to be able to use the photos in the IWeb, GarageBand and other projects associated with those acc

  • Utility to Append a CDRW disc wanted

    I spoke to an Apple technician regarding how to add files to a disc and then be able to add additional files at a later date. He explained that you must use the disc utility feature. Using the Finder will lock the disc immediately after adding a file

  • "Copy to this computer" depends on whether the remote user is logged in

    I want to gather a file from a client computer with the Spotlight search. The file's name is "polaranimalreport.doc". If the user of the account where the file is saved is logged in, this is what I see: and I am able to copy it to my computer. If the