MOVED: Raid problems after switch from K9N2-Platinum to 790FX-GD70 mobo

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=130049.0

Hi BOSSKILLER
Thanks for your quick response.
Quote from: BOSSKILLER on 12-August-08, 00:14:44
Well, leave the 80GB only and install XP over it.
Then connect other two HDD's and enable RAID for them.
Unfortunately this didn't help. As soon as I installed the Windows nVidia RAID SW it prompted med that it had registered the 80 GB disk as a new disk that wasn't a member of any RAID. This happened everytime Windows XP was started.
The trick was to add the 80 GB disk as a Spanned disk using the nVidia RAID BIOS setup utility. Install Windows XP (again) and the Windows nVidia RAID SW and setup RAID 1 on the other two sata disk.
I don't think this is a great setup but it works. I hope that MSI will fix this issue in a later BIOS upgrade. It would be nice if the enabled/disabled for sata RAID setting actually worked.

Similar Messages

Sync problems after switch from Windows to Mac; cannot read/write error msg

I'm not sure if this is a hardware or software issue.
I recently switched from a PC to a Mac. To move my iTunes files (50GB) I simply dragged and dropped them from my external HD to my new computer. I know that Apple does not recommend this process, but when I needed to move my library between drivers earlier this year, it was the only way I could do it without getting an error message that killed the process.
Moving the files seemed to be a success. Everything appeared in iTunes, I was able to play the music, etc.
I then tried synching my iPod (Classic 160 GB – I think 5th gen, it’s about 3 years old) on the new computer. I got some message that said you can only have one iPod per account and that I would have to wipe the iPod before syncing. I let it do that.
Here's where problems began:
With a few gigs to go in the sync I got a message that says something to the effect that iTunes cannot read or write to the iPod. Even though must of the library had been transferred to the iPod, before disconnecting the iPod iTunes wiped all but a few hundred megs worth of music from it. I've tried restoring the iPod a few times but that has had no effect. The first time I tried to sync the iPod it was formatted for Windows. I have reformatted it for Mac.
Also noteworthy is that the first 3/4ths of my library copies very quickly -- 1GB a minute -- but then it eventually slows down to where 100 MB takes 10 minutes. It copies the files in a different order every time, so it doesn't look like it's getting hung up on the same files every time.
In case I had a corrupted file, I deleted all the files added to the library since my last successful sync.
Suggestions?
Should I just go to the nearest Apple store and beg for mercy?

Hi!
same problem here.I can use around 30G of my iPod Classic 160G.If i try to upload more than that it will take very long time and finally freezes.
Have no idea what to do..

Post Moved No-phoneline-after-switching-from-Sky...

Moved http://community.bt.com/t5/Phones/No-phoneline-after-switching-from-Sky-to-BT/td-p/782646
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

andyfbartyla wrote:
....................To make matters worse, the guy who fitted the broadband wore his dirty shoes on my cream carpet, and left me to clean it up! never again! once bitten, twice shy!
It would have been the same engineer if you had gone from BT to Sky. Openreach own and maintain the external cable network for all comms providers (unless you are in a cable TV area)
If you have had a problem with the engineer and his muddy boots you can contact Openreach HERE//.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

FCP problems after switching from my G5 to a MacPro

I used the Migration Assistant to switch from my old computer to my new one and am now experiencing two annoying things with my FCP project:
1. When I try to Render I get a "File Access Denied" message.
2. When I make changes on my timeline I get a "Preparing video for display" message and the computer takes several seconds to make the changes. This didn't happen on my older G5
Thanks.

Migration Assistant doesn't work for professional applications. You will have to uninstall FCS and reinstall. Use this to uninstall.
http://www.digitalrebellion.com/fcs_remover.htm

Blurry font after switching from WinXP to Win 7 (Was:Schrift im Dreamweaver CS 3 verschwommen)

<Preran> For the benefit of moderators here, I used Google to translate your content into English:
Good day,
I have problems with blurry font in Dreamweaver CS3 after switching from Windows XP to Windows 7
I have already tried the following:
In "Edit" Preferences "change font size" - unfortunately that does not work. (which had worked fine in the previous changeover to Windows XP)
Then I got in the forum www. office-loesungen.de the tip, sometimes seen on the control panel display, which percentage is set.
When I got the set to the mean value, the writing was not so blurry, but still not really readable.
Experiments with Clear adjust TypeText were not successful.
There is a trick, so the font is larger
If I have to "small" hinders the size that was at 0.75 in the previous pages, it is readable for me, so I could enter the text and read it.
However, the text is then when uploading larger.
What can I do now?
For speedy help I would be grateful
Best regards
Guten Tag,
ich habe Probleme mit verschwommener Schrift im Dreamweaver CS3 nach der Umstellung von Windows XP auf Windows 7.
Ich habe folgendes schon probiert:
Bei „Bearbeiten“ und Voreinstellungen „Schriftgröße ändern“- das funktioniert leider nicht. (das hatte bei der letzten Umstellung auf Windows XP wunderbar geklappt)
Dann bekam ich im Forum www. office-loesungen.de den Tipp, mal über die Systemsteuerung-Anzeige zu sehen, welcher Prozentwert eingestellt ist.
Als ich den auf den mittleren Wert eingestellt habe, war die Schrift schon nicht mehr ganz so verschwommen, aber immer noch nicht richtig lesbar.
Auch Versuche mit Clear Type Text anpassen waren nicht erfolgreich.
Einen Trick gibt es, wodurch die Schrift größer wird
Wenn ich die Größe, die bei den bisherigen Seiten bei 0,75 lag , auf „klein“ verstelle, ist es für mich lesbar, ich könnte den Text so eingeben und auch lesen.
Allerdings wird der Text dann beim Hochladen auch größer.
Was kann ich jetzt tun?
Für baldige Hilfe wäre ich dankbar
Mit freundlichem Gruss
Renate Gundel

I've done this multiple times and it produces essentially the same message, but there is a mention that a restart is pending. This is also strange because this is definitely not the case. First time I used CScleaner it took a while and was obviously busy correcting something. However now when I select clean all, it simply dumps anopther massive log file into AppData and says cleaning completed successfully. Now I just ran it again, so would you like me to post the more recent log file?

IMESSAGE PROBLEM. Switching from android to iphone

I'm having problems with my iPhone 4s . my carrier is tmobile. I can't receive messages from other iPhones and I'm looking for any suggestions out there to fix this problem for me. I tried resetting the network settings. I switched from android gs3 to this iPhone 4s. I just took out my sim card from the gs3 to the iPhone 4s. I shut off my imessage. I went to verify my account to the macbook t. See if I can plug it into to that imessage and it will start connecting but it didn't work. Any suggestions?

Hi Raphaelvillarruel,
If you are having issues receiving messages in Messages on your new iPhone after switching from Android, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Regards,
- Brenden

Some issues after switching from 686 to x86_64

Hi all,
after switching from i686 to x86_64 using this link I am now facing some minor issues with some packages. I already activated the multilib repository but some problems remain. I checked the binaries in /usr/bin for 32 bit executables as described in the above link and there are 177 "bad" binaries left. I thought all of these were not executable, but surprisingly wine was. Strange!
ffmpeg is another 32 bit executable and not runnable. So I tried to reinstall it, but that failed:
> pacman -S ffmpeg
warning: ffmpeg-1:2.6.1-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg-compat: requires libx264.so=144-32
libx264 is installed and didn't want to be reinstalled either:
> pacman -S libx264
warning: libx264-2:144.20150223-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg: requires libx264.so=144-32
:: ffmpeg-compat: requires libx264.so=144-32
Can someone give me a hint, what's the best way to solve this problem?
Thanks in advance, Zmann

I think the first issue you will run in to is that the interface for an old P4 hdd will probably not be the same as a new computer. Besides that, it will probably be vastly slower than what comes with a new computer. I think that is not the best idea.
The only wat to really "trasition" between two archtectures that I know of is to copy configuration files over and have pacman dump a list of explicitly installed packages from the main repos. Then use that information to reinstall all those packages.

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

NI-4060 giving invalid 1st reading after switching from or to LOW Resistance Measurements

We've been using TestStand & LabView to test various Circuit board. On series of test involves checking for a short circuit (Measure Low Resistance 4-wire) then measuring for a 3.5Vrms signal on another part of the board.
For each measurement, the following NI-DMM VI's are used in order:
niDMMInit, niDMMAutoZero, niDMMConfigure, niDMMMeasure, niDMMClose.
If we do the Low Resistance 4WR measurement, then a AC V measurement, the 1st reading from the DMM is approx 10x too high, if a 2nd reading it done it is then OK.
It doesn't matter how long a delay is before we take the 1st measurement, it's always approx a factor of 1E+1 out.
If however we don't do a Low Restance prior to
the AC V measurement, then the measurement is always correct.
I expermented with turning AutoZero on & off, and various resolution settings, however none of these seem to have an effect on the result.
Can anyone explain these strange results?
Thanks
Simon Holman
Simon Holman
Software Engineer
Certified LabVIEW Developer
Certified TestStand Developer
measX GmbH & Co. KG.
http://www.measx.com

Thanks, after playing with a few more settings I found if I turned the Cacheing off niDMMInitWithOptions, with "Cache=0" that everything worked fine, but it would take a couple of seconds to get the first AC measurement after switching from resistance.
Simon
Simon Holman
Software Engineer
Certified LabVIEW Developer
Certified TestStand Developer
measX GmbH & Co. KG.
http://www.measx.com

After switching from SUNJVM to SAP JVM on Netweaver 7.0 server

After switching from SUNJVM to SAP JVM on Netweaver 7.0 server the b2b application and the xcm configuration detail cannot be accessed
it gives the following error.
#1.5 #00059A3C7800006D0000002C000015980004B30C3E45830D#1322765072300#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#0##n/a##820feec01c4c11e1c79300059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/Server/WebRequests#Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
Exception id: [00059A3C7800006D0000002A000015980004B30C3E457F63]#
#1.5 #00059A3C7800006D0000002D000015980004B30C671A5D9B#1322765757605#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#0##n/a##1a892d501c4e11e1b99700059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error##Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:330)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NoClassDefFoundError: com/sap/isa/core/ActionServlet : cannot initialize class because prior initialization attempt failed
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at java.lang.Class.newInstance0(Class.java:310)
     at java.lang.Class.newInstance(Class.java:263)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:319)
     ... 14 more
Caused by: java.lang.ExceptionInInitializerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at java.lang.Class.newInstance0(Class.java:310)
     at java.lang.Class.newInstance(Class.java:263)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:117)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:386)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
     ... 4 more
Caused by: org.apache.commons.logging.LogConfigurationException: java.lang.reflect.InvocationTargetException
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:532)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
     at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
     at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
     at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
     ... 13 more
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
     at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
     ... 17 more
Caused by: java.lang.NullPointerException: while trying to invoke the method com.sap.tc.logging.Location.debugT(java.lang.String) of an object loaded from field com.sap.isa.core.logging.sla.IsaLocationSla.location of an object loaded from local variable 'this'
     at com.sap.isa.core.logging.sla.IsaLocationSla.debug(IsaLocationSla.java:583)
     at com.sap.isa.core.logging.sla.IsaLocationSla.<init>(IsaLocationSla.java:46)
     at com.sap.isa.core.logging.IsaLocation.getInstance(IsaLocation.java:52)
     at com.sap.isa.core.logging.StrutsLog.<init>(StrutsLog.java:25)
     ... 22 more

Hi,
That particualr error should be solved by adding the following parameter to your instance profile:
jstartup/vm/parameters = -XX:-ExtendedExceptionMessages
The issue is related to note 1693118
Kind regards,
Cathal

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Problem loading safari webpage after switch from EDGE to 3G and vice versa.

ok, very simple question
i'm on edge, i want to go on safari, so i enable 3G. after that i go on safari and try to open a webpage. even after the 3G icon displays on top, it still takes a very long time before the webpage starts to load. Sometimes i get a message saying Safari could not open the page because the server stopped responding. IS THIS NORMAL?
also if im on 3G and switch down to EDGE and then open a page in safari i get a message saying Could not activate cellular data network, even though the page loads anyway. IS THAT NORMAL?
Message was edited by: Stevendo

are you on 4.0.1?
if so then this of course is not normal but it is also happening to me
ill be at home and have 3G on 4 bars and i try to load a page on safari and nothing happens, then i switch it to edge and it connects, but like u when switching from 3G to edge i get those messages.. also i noticed that this only happended after i updated to 4.0.1 and i NEVER got these problems b4 on 4.0 and to make things worse.. in order for my 3G data to work i have to make a phone call, hang up, then ill get connectivity on 3G..
so the fix... i dont kno??
but im suffering like u...

Problems with email after switching from POP to IMAP

I recently switched from POP to IMAP settings on my MacBook Pro (OS X Yosemite 10.10.2). My email seems to time out and then my emails seem to disappear. Then I have to logout and re-launch every few minutes to keep seeing my emails. Everything seems to be working fine for my iPhone and it's IMAP settings. Any ideas anyone?

William Kucharski wrote:
V.K. wrote:
when an IMAP account is set to use IDLE (a desktop equivalent of push) the emails are pushed by the IMAP server to Mail as soon as they are received. when this happens no new mail sound is played.
That is incorrect.
well, it always worked this way for me on all my imap accounts (I have 4).
and I've seen lots and lots of posts describing the same behavior. I don't know what's going on in your case.
I have two email accounts, both use IMAP IDLE, and I get the new mail sound each and every time a new mail message is delivered to either.
So there's some other factor at work here.

Problem when switching from https to http on Safari

I am using a Safari browser and try to switch from https to http within the same web application.
The Safari browser is configured so that on Safari->Preferences->Security the check box "Ask before sending a non-secure form to a secure website" is checked.
When using the Safari browser in my web application and going from an https page to an http page, the browser shows an (expected) dialog box asking the user whether he wants to send a non secure form. Clicking Ok (twice) causes the following problematic dialog box to appear :
Safari can't open the specified address;
Safari can't open "(null)" because Mac OS X doesn't
recognise Internet addresses starting with "(null)"
How can I avoid this problem without having to uncheck the above mentioned check box in Safari->Preferences->security.

I have somehow a similar problem,too. My site is in https upon login which maintains some session data. One of the features of my site is the file upload (servlet) which does some batch processing. Since my https session terminates(timeout)upon uploading, I resorted to switching the link to an http session using
File Upload
When I do "session.getAttribute('data')" in my servlet after being called by the "upload.jsp", a NullPointerException is thrown at that particular line.
My question:
1. Upon uploading of file/data via https, is there a maximum bytes that it can only process? My file is just less than 1MB and it terminates the session. How do I go about it? Should I switch it then to an http?
2. If I switch from https to an http session, SSL session data can not be retrieved from an http session?
Thanks!

"Class Not Registered" after switching from 32-bit to 64-bit LabVIEW.

I recently upgraded LabVIEW 2012 from 32-bit to 64-bit. Now I'm getting an error that says "Class not Registered". It still works just fine with the 32-bit version.

Thank you Nathan and Sunshine. The problem is I didn't build the program - it came with the instrument. As far as I can tell this is what's going on: The vi's are replete with these activeX objects - all communication with the instruments is done through invoke and property nodes. After switching to 64-bit the very first sub vi has an error at the very first command (Err (-2147221164)). It's a reference (seemingly to a class but I actually have no idea what that means) passed to the "Open Automation Function". I'll attach a screen shot for the sake of overkill.
Attachments:
labviewerror.png ‏20 KB

MOVED: Raid problems after switch from K9N2-Platinum to 790FX-GD70 mobo

Similar Messages

Maybe you are looking for