MOVED: Re: 790FX-GD70 Bios update causing issues?

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=138682.0

>>Use the MSI HQ Forum USB flasher<<

Similar Messages

MOVED: 270X 4G UEFI bios update/custom fan profile please! =)

This topic has been moved to BETA & MOD BIOS Section.
https://forum-en.msi.com/index.php?topic=180615.0

E7681IMS.434 ==> E7681IMS.437
01. Modify power LED color in S0/S3 mode.
01. Fix PCI or PCIE lan can not wakeup after onboard lan controller disabled.
02. Modify watchdog timer function code.
03. update realtek uefi pxe rom.
04. Fix NV's GOP crad will lag & freeze in setup when win8 Enable.
05. Fix press DEL key can't entry BIOS Setup when fast boot enabled after.
06. Modify fast boot default to disabled when win8 disabled.
07. Fix USB Support and Fast Boot item help string show error issue.
08. Add to switch T1,T2 orT3 Mode To Thermistor for fintek.
09. Fix SATA Devices Support function error issue.
10. Fix ps2 keyboard can't use in os when msi fast boot enabled.
11. Modify adjust CPU I/O voltage function code.
12. Modify item"Resume By PCI-E Device" to"Resume By PCI or PCI-E Device".
13. Fix OC retry count always one more time then require.
14. Fix PCIE GEN3 display card issue.
1. Add VGA hot-plug solution.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

MOVED: K8N NEO Platinum Bios Update - Memory Downgrade

This topic has been moved to AMD64 nVidia Based board.
K8N NEO Platinum Bios Update - Memory Downgrade

just switch back to bios 1.7

MOVED: I think a bios update for the dka790gx platinum is in order

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=130180.0

I can check these timings using AMD Overdrive 3.02 (AOD). Performance control lets you play with lots of features in memory timing that are not in the BIOS. I used it to tighten up on memory timings get memory benchmark >2900 consistently with AOD's benchmarking utility. I did this at stock settings.
And the problem is there is a bug in the bios. Least I think it is a bug. The only time you get EPP limits on the values you can choose in the memory timings configuration screen of the bios is if you set the memory multiplier to 2.66:1, with or without EPP enabled. Otherwise it puts JDAC 400(DRR2 800) limits on the values. I want to have the freedom to set my timings to EPP 533 limits(DDR2 1066) when I am using a memory multiplier less than 2.66:1, like 2:1 or 1.66:1, so I don't have to up the voltage to much to get a solid stability test. I can get a good stability test with the DRAM Voltage set to 2.2, and memory is cheap enough I just might see how long they last like that, but I really want this bug in the bios fixed. I am sure it is in all of the MSI boards that use ATI 790GX chips.
I have been trying to figure out is enabling EPP does anything except lock you into the EPP timings when you are at 2.66:1. With EPP set to enabled I should be able to set my timings to CL=5, tRTC=5, tRP=5, tRAS=12-18, tRC=25-31, tWTR=3-5, tWR=8. Having the freedom to set these to EPP limits at any memory multiplier is crucial to successful overclocking on the nb/ht reference clock. How can we get MSI to make this a part of the next bios update? Without this correction, I am limited to tRC=26, tWR=6, tWTR=3, these are the JDAC limits not the EPP limits. We should see EPP limits if it is enabled. Least that's what it says in the nearly not informative help side panel.

Satellite L300 - BIOS update caused screen to go black

Got Tempro notice to upgrade Bios on Satellite L300. During upgrade installation, laptop rebooted by itself. Result is charge light on and power light on, fan running but screen is black. What do I need to do to recover the machine.

Hello
Try this workaround posted by Akuma.
Normally you must not do all updates that TEMPRO says. You should only update the BIOS or drivers if you have an issue with the notebook.
A BIOS update is always a little bit risky.
In worst case you must go to an ASP. The technicians can try to reflash the ROM module or exchange the mainboard.
Greets

MOVED: Urgent! screwed BIOS update!! PLS HELP

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=104028.0

Quote from: steffen.agermann1989 on 23-January-15, 08:40:53
Hi soo i have a GT702 PE gtx880m and a 4810mq an currently im stuck on bios 50v and i want to update to 717 but i tried everything and its not working either way
i can flash from 50v to 517 that goes but i cant go any further if i try the laptop only turns on and off alot then boot back into windows logon screen
what am i doing wrong?? hope anyone got a clue i have plans for updating to the latest gtx980m and i realy need that bios update fast :/
If i can get a update order or an explanation how to do it it woud be awesome
man dont do anything with that 717 because your system non raid.am i right?

ITunes 11.4 update cause issue with AppleUSBEthernetHost.kext

Along with many others iMac users, the iTunes 11.4 update cause a window that informs that the system extension "/System/Library/Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used.

Am on Snow Leopard and downloaded and installed the update to ITUNES yesterday - Itunes itself installed okay - but I did get the same system extension cannot be used.
I don't have any ethernet devices - so I checked the System/Library folder and the date on the file Is July 13, 2009.
My IPOD (probably now classic because of age) synced okay through USB port, and everything is working fine. As the update was to allow more devices to sync with ITUNES it may be the error message is not correct one.
Seriously - Apple needs to get out of Silicon valley - the message if correct is for techies - not for users who just want the software to update without problems. Lately Apple is preaching to their own choir.
I did send feedback through Itunes to Apple - -- If you are experiencing crashes after this update make sure you send the crash report to apple explaining that it is happening after this install -- also call or schedule a call with apple support --

BIOS Update causes Blue Screen of Death - PLEASE HELP

PLEASE HELP!!
After recently reformatting a Lenovo 3000 N200 (XP SP3), I downloaded the Lenovo Care (or whatever it's called), which downloaded a whole lot of updates, drivers....
The last thing that was downloaded was a BIOS Update. Before flashing and reprogramming the BIOS, the program created a backup of the old BIOS.
Since the BIOS Update, I can no longer turn on the laptop without the BSOD (Blue Screen of Death). When I try to turn it on, it shows the Lenovo startup screen, then goes to the "previous attempt was interrupted" menu (the menu where you can choose 'Safe Mode'...), and no matter which option I choose, it starts to show the XP startup screen (with the progress bar), for 1/2 a second, then displays the BSOD for 1/2 a second (too fast too even read what it says or even get the error code).
What can I do to remedy the situation? Can I somehow access the backup of the old BIOS to restore it? Or is there something else I can do?
BTW, When I click F1 on the Lenovo startup screen (to get into the BIOS settings) it shows the BIOS version to be "68ET35WW (V3.03) - which is apparently the latest version for that laptop
Message Edited by yksnirk on 01-20-2009 08:15 AM
Message Edited by yksnirk on 01-20-2009 08:15 AM

If you have restored the device as new and tested it without using your backup and it is still malfunctioning, then you need to make an appointment with the Genius Bar of the nearest Apple Store or Authorized Apple Service provider, depending on your location, and have the hardware checked.

BIOS update installation issues

I tried to install the BIOS update:
ACPI Flash BIOS version 1.80 for Satellite A300/A305 (PSAG0U/PSAG4U) (v1.80; 03-24-2009; 4M)
(its called sag0v180.exe when i download it)
this was originally because i kept getting a blue screen(and still am) and windows advised me to update my BIOS and display driver. When i was installing this update, i got a blue screen and so it didn't finish. Now when i try to update it i get a STOP message:
Error:C:/sag0v180/launcher.exe
1418: Shortcut functions: error loading shortcut file
On line 177 of D:/var/Win...ios_launcher/Launcher.wbt
In routine "make_shortcut"
shortcutEdit(linkName, strCat(appdir, '\', 'Launcher.exe'), '', appdir, @Normal)
the grey bit is in a box below the rest.
It also gives me an option to "traceback" - what does that mean?
What exactly does this error mean and what should i do?
please help!

Unit's second digit of serial number is 8. Same problems were appearing after BIOS 2.3 upgrade. I had taken photo at the end of flashing BIOS.
It had said at the end System configuration data updated.
Warning
0251: System CMOS checksum bad - Defult configuration used.
Hence, I followed the instructions and flased bios again using SAME Cd as previous time.
This is what the screen said:
Phoenix Phlash16 Utility version 1.6.5.4
--------------Performing the following function-----------------
Load Image File MM230MP.ROM
Verify i/f inf
Backup system BIOS ROM
Check flash Memory types
flash Memory block: 0123456789ABCD
Save block .............
Restore block ..............
Zero out block .........
Erase block ////////
Program block ////////
Verify block ////////
Flash programing complete.
New BIOS Date , Time , Part Number : 12/08/08 17.01.44 Devef10
Flash Part: W25x80 Device ID : 13 Mfr.ID: ef
Erasing Block at FFFD00000 with 10000 bytes 10:57:39(16)
Now the screen doesn't show anything. Only the AC in, Switch on & Battery lights appear in Blue.
I did a clean install of Win 7, following the instructions found in the "How To Manually Upgrade from Vista to Windows 7.
Kindly adavice, if possible by email.

890FXA-GD70 bios update via Live Updat & now won't load windows...help pls

Hi There
First off, please excuse the fact that I am not very experienced with the tech aspects of a home build (which this is & I bought off the builder), or any build for that matter..
I was getting a 'keyboard/interface' press f1 to continue error message, when I started my computer, along with most of the usb ports not working when windows 7 ultimate (64) sp1 (build 7601) loads.
Otherwise it was working fine..
So I deceided to follow the instructions of the Live Update tool & used the total installer to update the bios from American Megatrends V1.10 06/30/2011 to the latest bios. I know now that wasn't very wise (why is it even an option if it can do soooo much harm?).
After it updated the bios there was a question (which I don't recall of course), something about ROM I think and not being the same, with 3 choices to correct it and I'm pretty sure I went with the 1st option for it to be corrected.
So now when I turn the computer on it starts loading everything (I can get in to the bios setup), right after it shows the windows logo it flashes a blue screen with some type on it & goes to windows startup repair which of course doesn't help & tries to do a system recovery which also doesn't work.
I don't want to do any more damage by fiddling around with things I know little about.
I was encouraged to read in one of the post answers that if it gets to the point where Windows goes to load than the mobo is ok...hopefully!
Any assistance would be greatly appreciated.
Specs: (Copied from a Belarc Advisor scan)
O/S Windows 7 Ultimate (x64) Service Pack 1 (build 7601)
Main Board: 890FXA-GD70, Bus Clock: 200 megahertz BIOS: American Megatrends V1.10 06/30/2011
Processor: 3.30 gigahertz AMD Phenom II X 6 1100T Multi Core Not hyper-threaded
Drive: ST3500418AS Hard drive 500 gig SMART Status: Healthy
HL-DT-ST DVDRAM GH24LS50 ATA Device (optical drive)
Optiarc DVD RW AD-728OS ATA Device (optical drive)
PSU: Corsair GS500
12 gigs of RAM 1. 2048, 2. 2048, 3. 4096 4. 4096
Display adapter: MSI R7850 Twin Frozr 2GD5
Local Drive Volumes: c: (NTFS on drive 0)
Hopefully that is the required info on the specs.
Thanks in advance for any assistance.
Rob

yes the BIOS controls the CMOS from that User interface with all the settings menus!
and yes its in there where you can see what Drive mode its set at!
if its using the older style BIOS like my board has and not a UEFI then in this heading set:
1: go into your BIOS (press Delete)
2: Integrated Perifirals
3: On-Chip ATA Devices
4: Raid Mode <--- the options for that should be in there if its the same and may have been set to IDE mode before the update but may be set to AHCI now after you flashed the BIOS via live update which is more then likely why your getting a BSOD as it in the wrong operating mode!

Update caused issues

If this Kill-switch feature (another lovely thing brought to us by the flakes and nuts of california) is what's causing all this lag and trouble in my phone, where is the Opt-out panel as defined by the statute?
Subject Title edited to reflect new topic.

Yes...starting in the 10.3.1 rollouts, there have been many many folks reporting issues when using the automated "update" processes. Reloading the OS (via the "official" methods) has often cured their issues. Sometimes more is required, but that's the first step in trying to resolve issues caused by something potentially going wrong in the automatic update process.
Good luck and let us know!
PS... the poor OP on this thread, our discussion has gone far off track from that. I am going to ask the mods to split our discussion away from the OP. PPS...you also need to change your profile on this site...it still says "9530" as your device... Edit... Now that this is split out, I'll place some useful links to the recommended process. The official OS reload methods:http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-OS/td-p/2187545#nobannerThe unofficial methods:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using-Autoloader/td-p/2466747#nobannerhttp://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/

MOVED: Z68A-GD55 (G3) Bios update problems!

This topic has been moved to MSI Intel boards.
https://forum-en.msi.com/index.php?topic=253120.0

Where did you download the bios file? from msi website?
Did you put the .exe file under the root directory of your USB pen drive?
Did you follow this update guide ? (start from page 6)
http://www.msi.com/files/pdf/Bios_update_SOPAll.pdf
Did you see this screen when you try to update your bios under DOS mode?
Format your USB to bootable and try again
https://forum-en.msi.com/index.php?topic=165175.0

MOVED: K8N SLI Platinum - BIOS Update

This topic has been moved to AMD64 nVidia Based board.
K8N SLI Platinum - BIOS Update

Sorry, I'm dozzy... I've since discovered that it's a 219 Mhz problem, there's a sticky in the overclocking section on how to overcome it, and it doesn't apply to me anyway, 'cause I've got a Venice...

790fx-GD70 Dual channel memory issue

I am just trying to build my 2nd pc and have ran into some snags I need some help with. I'm using the above motherboard with the AMD Phenom II X4 955 Black Ed 3.2 - HDZ955FBGIBOX processor. I'm using a CORSAIR|CMPSU-750TX 750W power supply along with a XFX HD-489A-ZDFC HD4890 1GB video card. I'm trying to run 2 sticks of 2 gig ddr3 memory. I originally purchased CORSAIR XMS3 DHX 4GB ( 2 X 2GB ) PC3-12800 1600MHz 240-pin DDR3 memory. I am only able to get 2g to boot. If I install a 2nd dimm it will not boot. I originally thought it was the speed of the memory so I just ordered some more Corsair but at the 1333 speed and I have the same issues. Each individual stick will work by itself but if I add any multiple sticks the pc will not boot at all. I have currently installed vista 64 bit. Any ideas on what might be defective or if it is simply a compatibility issue I'm having? Thanks for any help you can provide.

Silly question, but you have tried DIMM 0 & 1, and DIMM 2 & 3, right? That's first and second slot, and third and fourth slot.
Checked the product page, did not say whether or not it was Intel or AMD tested.
As said, please check voltage/timings in BIOS. Also, when you *do* get your system to start up, what is it running those sticks as? Under the BIOS screen, are they running at 1066/1333/1600? It should tell you during POST.

Java 2013-003 Update causing issues

I own several Mac's; one Macbook and two iMacs, each with different versions of OS X and after installing the 2013-003 update I'm having major issues with Java. In fact since Apple decided they didn't want Java running on their OS's and in their browsers, I've had numerous problems.
Today I was forced to install the 2013-003 update and when I try to run a website I use which requires Java, all I'm seeing is this message:
Use the Software Update feature (available on the Apple menu) to check that you have the most up-to-date version of Java for your Mac.
Clearly I've updated to the latest version and I've even tried installing the most up to date version of Java from Oracle's website yet I'm still having the same issue. I love my Apple computers but I'm getting really sick of the constant Java issues.
Any ideas what's going on?
Thanks.

Would like to know the answer to this too.

MOVED: Re: 790FX-GD70 Bios update causing issues?

Similar Messages

Maybe you are looking for