MOVED: Re: HOW TO switch from IDE to AHCI mode without having to reinstall Win XP (GUIDE)

This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=138985.0

Similar Messages

IPhone 3GS froze during iOS 5.1.1 update - how do I get out of recovery mode without having to restore?

So I tried to update my iPhone 3GS to iOS 5.1.1, like iTunes told me to do, and it froze part way through the installation for a couple of hours. I tried to "reset" the iPhone by pressing both the home and power buttons simultaneously, but now iTunes tells me my iPhone is in recovery mode. From my limited knowledge, it seems I need to restore my iPhone, but I don't want to lose anything, like my SMS history.
Is there a way to get out of recovery mode without having to restore?
Thanks!

I came across this post as my iPhone 3Gs had gone into recovery mode on its own accord.   I had hundreds of photos unsaved and was gutted when I saw this post, I felt even worse as it was not the information (gdgmacguy) I wanted to read.
Unfortunately, the above post is simply wrong! A system cannot destroy information in a blink of an eye.   If it were that easy, the forensic teams across the world would have a hard time. A criminal could simply force a phone into recovery to remove all the data. Please!
I managed not only to take the phone out of recovery mode but also, salvaged all the data held on it.
To be fair, I am a little annoyed at Apple for not offering a salvage option on the device for such a situation. And it may be that they will not like me sharing this information, in which case I believe this view to be morally wrong because photos are so important. We all make mistakes, in terms of forgetting to backup from time to time.
What I used was the Redsn0w software, running as an administrator in XP compatibility mode. In the ‘Extras’ section it as a Recovery Fix option. It simply runs some software that takes the device out of recovery mode. I had to run it twice for some reason but the second time (out of desperation) worked a treat. The phone is now exactly as it was before it went into recovery mode. More to the point, it allowed me to backup all the photos and videos that I had failed to do before hand. And let’s face it, photos and videos are usually the most valuable stuff we keep on our phones.
I hope this help anyone in the same situation. I really hope someone from apple reads it and is able to convince the bosses that a recovery option is very important. And to take note that YES it is possible to recover data on a phone stuck in recovery mode. And more than likely it would be easier for apple, compared to other non-apple professionals.
Good luck.

Switching from IDE to AHCI without re-installing (Windows 7 and 2003)

Hi,
I had posted about how I had switched Windows 7 64-bit on my 880GM-E43 earlier on this earlier thread:
https://forum-en.msi.com/index.php?topic=148522.0
and mentioned that I also wanted to get Windows 2003 (32-bit) switched on this same mobo (I dual boot).
I just found this last night:
http://www.wikihow.com/Enable-Raid-or-Ahci-Without-Reinstalling-Windows-for-Amd-Sb850-(Possibly-Sb8Xx)-Controllers
and got it working.
I posted a comment under the comments for that wiki with my .reg, but it hasn't appeared yet, so here it is:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\CriticalDeviceDatabase\pci#ven_1002&dev_4391&cc_0106]
"ClassGUID"="{4d36e97b-e325-11ce-bfc1-08002be10318}"
"Service"="ahcix86"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86]
"Type"=dword:00000001
"Start"=dword:00000000
"ErrorControl"=dword:00000001
"Tag"=dword:00000001
"ImagePath"="system32\\drivers\\ahcix86.sys"
"Group"="SCSI Storport"
"DisplayName"="AMD AHCI Compatible RAID Controller"
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Parameters]
"BusType"=dword:00000008
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Parameters\PnpInterface]
"5"=dword:00000001
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Settings]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Settings\CAM]
"EnableALPEDisableHotplug"=dword:00000000
"EnableCCC"=dword:00000000
"CCCTimeoutValue"=dword:0000000a
"CCCCompletionValue"=dword:00000020
"NCQEnableDiskIDBits"=dword:ffffffff
"EnableHIPM"=dword:00000000
"EnableDIPM"=dword:00000000
"EnableHDDParking"=dword:00000001
"CAMTimeOutValue"=dword:00000005
"EnableAN"=dword:00000001
"EnableAPS"=dword:00000000
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ahcix86\Enum]
"0"="PCI\\VEN_1002&DEV_4391&SUBSYS_75961462\\3&13c0b0c5&0&FA"
"Count"=dword:00000001
"NextInstance"=dword:00000001
I also use the HotSwap! utility to do safely remove drives now:
http://mt-naka.com/hotswap/index_enu.htm
and that works well.
I hope that this helps others!!
Jim

Most curious thing. Arch didn't require any actions from me to succesfully boot into the system after switching to AHCI
# dmesg | grep -i ahci
[ 1.883905] ahci 0000:00:11.0: version 3.0
[ 1.884180] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.884183] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.885364] scsi host0: ahci
[ 1.885508] scsi host1: ahci
[ 1.885640] scsi host2: ahci
[ 1.885772] scsi host3: ahci
[ 1.885903] scsi host4: ahci
[ 1.886033] scsi host5: ahci
Additionally GRUB seems to be sensitive to overclocked systems. I get stuck on Veryfying DMI pool data. GRUB won't start when disk controller is set to IDE. To get GRUB to start I have to:
- enable AHCI (GRUB starts)
- reboot and disable AHCI (GRUB starts)
My OC configs have never caused such behavior when I had only Windows 7 installed.
Last edited by bbarcher (2015-04-19 15:40:39)

How do i put tv programmes and videos from itunes to another iphone, without having to delete all data on the phone and replacing it with my library? i switched the 'sync only ticked songs and videos box' yet it still wont let me transfer videos from my i

How do i put tv programmes and videos from itunes to another iphone, without having to delete all data on the phone and replacing it with my library? i switched the 'sync only ticked songs and videos' yet it still wont let me transfer videos from my itunes onto my new phone, any ideas??

Copy the entire itunes folder from the old computer to the new computer.

How to switch from text message to iMessage for 1 contact

I have one friend with an iPhone who all of the sudden in my messaging has switched from iMessage to text messages with working WiFi on and stable, on my iPhone 5 (iOS 7.1.2). This is not a cellular or wifi issues, I guarantee, I am iMessaging other people without problem. She is also iMessaging other people without problem.
I have tried all work arounds I've seen on the web including:
-turning iMessage on and off, turning the phone on and off
-deleting all conversation with her and then sending a new message
-labeling the contact as an "iPhone" on my iPad (doesn't seem to switch label to "iPhone" and "iPhone" is no longer available as a label on iPhone)
-sending an iMessage on my iPad to her and then trying to use same message stream on the iPhone
This is beyond ridiculous that there is no way to switch from text to iMessage, I know how to switch from iMessage to text when the "error" comes up that it can't be sent as in iMessage. Any ideas?

You didn't mention trying these two steps:
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
... which are listed as steps 4 and 5 near the middle of this article:
iOS: Troubleshooting Messages

How to switch from a word doc to another using a keyboard shortcut?

how to switch from a word doc to another using a keyboard shortcut?

Cmd+tilde to switch between open Word documents, or
Cmd+tab to switch between open applications, if that's what you are after?

HT5622 How to switch from one apple store to another

How to switch from one apple store to another

Follow this procedure:
1. Go to Settings > iTunes & App Stores > Apple ID.
2. Tap your Apple ID.
3. Tap View Apple ID.
4. Enter your password.
5. Go to Country/Region in the popup window to change to the desired store.
See also: http://support.apple.com/kb/HT1311

I am a brand new mac user...trying to figure out how to switch from the Mac Pro screen to my external monitor. Appreciate any help.

am a brand new mac user...trying to figure out how to switch from the Mac Pro screen to my external monitor. Appreciate any help. thanks

In Finder... goto Help... In the Search Window type in Displays...
Lots of Useful Information there...
You may find these Links Useful too:
http://www.apple.com/support/mac101/
http://www.apple.com/support/macbookpro/
Cheers,

How to switch from one Data base to another data base

Hi,
How to switch from one Data base to another data base if first data base server like in restoring,blocking,network disconnected state.
Please help out for the same.
Regards,
Anilkumar

Sounds like a problem for forums/support from the DB provider, as this problem is normally solved through some form of HA provided by the DB (or some cluster software, but still not Java) with, normally, a shared (virtual) IP address.

I bought yesterday the software MacFamilyTree 7. How to switch from English to French?

I bought yesterday from the French ITunes store "MacFamilyTree 7. v.7.0.
My question is "How to switch from English to French?
I am using Mcbook Air with up dated Mountain Lion

These applications use your system language, so you have to change the language. Go to System Preferences > Language and Text > Language, and move French to the first place. The next time you start Mac OS X, it will start up in French, and your application will show up in French

Windows Vista won't boot changing from IDE to AHCI in BIOS

Hi, I've spent a lot of time looking up this problem online. I can find lots of google search results and they seem to say go into the REGEDIT and change the 'msahci' start setting to 0 and even the 'pciide', or 'iaStorV' start settings to 0. But that doesn't work for me. The Windows load screen with the green load bar just keeps going across and Windows never starts up. I have Windows Vista Home Basic.
I saw someone in this forum with a similar problem but they upgraded to Win7 on a fresh install to fix the problem, they were switching from RAID to AHCI. I contacted Intel tech support and they said to try HP or the motherboard manufacturer. I contacted Intel because I installed an Intel 520 series Solid State Drive and wanted to know if they had a driver to get the benefit of AHCI rather than IDE. I know lots of people recommend a fresh install of Windows but I did not get a cd of Windows with this computer
(My computer is a Compaq Presario SR2170NX Desktop
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00835809&tmp_task=prodinfoCategory&cc=us&dlc=en... )
I tried installing this Microsoft fix too. http://support.microsoft.com/kb/922976
I'm wondering if there is an AHCI driver I can install or anything I can do to get AHCI working?
Thanks to anyone who can help!
This question was solved.
View Solution.

You're very welcome.
I always leave the boot order BIOS setting to boot from the HDD first so as to shave off a few microseconds from the boot time.
When I need to boot from another device such as a DVD in your case, I turn on the PC, at the beginning of the HP welcome screen, I tap the F9 key to get the one-time boot menu.
I select the DVD drive from the list. Then I hit the button on the drive to open the drive, pop the bootable DVD in, close the tray, wait a second or so and then hit the enter key.
After I hit the enter key, watch the sreen for a message that states in substance...attempting to boot from DVD...press any key to boot from DVD...
I press any key and the PC boots from the DVD and off I go...
Looking forward to hearing back from you.
Now remember...making that file is pretty easy, but only if you read both my notes and the guy that wrote the procedure's steps carefully.
There have been a few forum members that I have had to coach during the process, because they were following that guy's every step to the letter, and as I pointed out, there is only one mistake on his first screen shot...but that one mistake is all it takes to stop you cold.
Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
The files were already extracted to that Vista folder when you ran the X14.exe file by reading the text on top of the first screen shot.
You get past that, and you're home free.
Good luck!

Switched from a PC to a MBP, having trouble with iTunes syncing iPhones, iPods. Devices are still linked to the PC ?

Switched from a PC to a MBP, having trouble with iTunes syncing iPhones, iPods. Devices are still linked to the PC. How do I undo the PC link without a restore / reformat?

Post in the iTunes forum:
https://discussions.apple.com/community/itunes
Read:
http://www.apple.com/support/switch101/
http://www.macworld.com/article/1153952/superguide_switchingtoamac.html

Mail -- How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

How can I change the default email account from which my messages go, without having to change it each time I draft a message? It currently assumes an email account that I rarely use. Thanks.

sorry, but I can't find the mail preference in the latest Yosemite OS. Do you know where I can find it?
Thank you
Don

TS1424 I downloaded a song that I purchased from the ITunes store, but the song does not play properly. How can I re-download the same song without having to purchase it a second time?

I downloaded a song that I purchased from the ITunes store, but the song does not play properly. How can I re-download the same song without having to purchase it a second time?

I could not find an option to "report a problem".
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

How do you delete contacts from your phone for good without having it appear in the messages app?

How do you delete contacts from your phone for good without having it appear in the messages app?

Hi tieyce,
You need to hook up your iPhone, select it under Devices, and then go to the Photos tab on the Device Profile, and uncheck Sync Photos, then sync. That should delete all photos that were downloaded from your computer.
When you say you have 2 separate albums of the same sets of pictures, what 2 albums are you referring to? Can you provide us with names of those "duplicate" albums?
Cheers,
GB

MOVED: Re: HOW TO switch from IDE to AHCI mode without having to reinstall Win XP (GUIDE)

Similar Messages

Maybe you are looking for