MOVED: RMA Process for my board MSI NEO2

This topic has been moved to Anything Under The Sun.
RMA Process for my board MSI NEO2

The first guy I spoke with trying to find out the status on my RMA did have a firm grasp on the english language - so I trust when he said, and I quote, "The testing department found nothing wrong with your board, so we're sending it back (to you)."
The second gentleman I spoke with a week later trying to find out where my board was didn't have english quite mastered fluently, but was able to give me the information I needed.
Generally though - what I usually understand (doing RMA's for a company myself) is that if someone RMA's something, you generally ship out a REPLACEMENT anyway, so this may be the case.  I sure hope so.
This has been quite a puzzling experience from day one anyway.
SunnyD

Similar Messages

  • RMA Process for Warranty management

    Hi,
    I want to set up a return material authorization (RMA) process for one my client.
    Is it possible to configure the entire RMA Process in SAP ECC for warranty management???
    The scenario as per my requirement is:
    Customer sending defective component/part to OEM, which is under warranty is same as sent to the supplier by OEM itself.
    Is there any standard process/configuration available for this???
    Note::: We don’t use CRM, PM & EWM.
    Please give me your valuable advice.
    Thanks in advance
    Ramesh

    Hi,
    I want to set up a return material authorization (RMA) process for one my client.
    Is it possible to configure the entire RMA Process in SAP ECC for warranty management???
    The scenario as per my requirement is:
    Customer sending defective component/part to OEM, which is under warranty is same as sent to the supplier by OEM itself.
    Is there any standard process/configuration available for this???
    Note::: We don’t use CRM, PM & EWM.
    Please give me your valuable advice.
    Thanks in advance
    Ramesh

  • MSI Neo2 Plat wont work!

    Hey guys, recently bought all new parts for a computer:
    MSI Neo2 Platinum Socket 939 Mobo
    AMD 3500+ 939 not proccess .013 micron i think?
    WD 160GB 8mb SATA HD
    Leadtek Gforce 6800GT 256mb AGP8x
    Corsair XMS Extreme 1gb (512 x 2)
    ok so I put all the things together and try to start the computer. At the first screen where it shows the VGA bios info its all in symbols and in different colors and I cant read anything and when it goes to the MSI Neo2 Platinum Edition Screen I cant see it well either. It then goes onto Verifying DMI Pool Data... and hangs there. All 4 leds are on, for the D bracket thing. Everything is in symbols and I cannot read anything nor enter bios. HELP PLZ!
    PS. Turns out I can enter bios but there are black square spots all over the place preventing me from actively reading the bios settings and such.

    Sounds like a faulty video card to me.
    Try using a spare video card for testing.
    But don't test with one that is too old. I believe this mobo only suports video cards that use the 1.5V standard. Usually any AGP 4X or better will do.

  • MOVED: Best Drivers for MSI 6600GT in SLI mode

    This topic has been moved to AMD64 nVidia Based board.
    Best Drivers for MSI 6600GT in SLI mode

    When i first tried that both cards were healthy and operated fine in non-SLI mode. Tried again 1-2 days later and one card gave coloured blocks all over the screen.
    Yup, one card was in the process of croaking so giving random effects. Now thoroughly dead and on the way back for exchange.
    Thanks for looking and answering.
    mick

  • MOVED: Looking for a board that supports IOMMU and has integrated graphics

    This topic has been moved to Linux/Unix.
    https://forum-en.msi.com/index.php?topic=163832.0

    I'm not sure how far the fsb goes but I know that I can set mine to 500 in the bios!!!  Usually run it at 200, and have gone as high as 245, but 300???? you'll never get there without extreme overvolting and liquid nitrogen cooling!
    Dynamic overclocking does not increase voltage, you must set it before if you have to.  And dynamic overclocking is also limited to a 15% increase of the fsb (AFAIK).
    About wanting a board that supports the 300 fsb, you might want to wait a few years for that LOL.  No current processor can hit that high anyways.
    Other specs for my board, cant adjust the Vcore because I have a Prescott so I don't know how high it can go, Vdimm goes as high as 3.0 volts, and agp volts can go to 1.8.
    Thats about it.  Hope it helps you find what you want.
    EDIT:  Oh, and I don't know about the MS-DOS stuff, and the mem should not be a problem unless it has a cas of 2.  And the agp/pci does not say that its locked, but I have checked the speeds with Clockgen and it does not vary at all.

  • HT1918 i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fi

    i have recently moved from the uk to australia and cancelled my uk debit before the payment was processed for songs i bought in itunes. i have tried to edit my billing info with australian debit details but the site says 'invalid card' how can i fix this?

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?cc=us

    What is the cost and process for factory refurbish of a tx2-1375dx with a blown system board?
    How would one go about arranging for such service?
    Why is it impossible to contact a real human for support, either via online chat or phone? 

    Last I checked I am a real human, it is just that I do not work for HP and can't speak for them. HP would not be the place I would go for a "refurbish" job. They charge an arm and a leg for out of warranty service. You simply need to find someone to replace the system board (motherboard). It is also very likely on that model that you could have your system board repaired. There are many services on ebay that will repair the motherboard at the component level. The cost would be at or under $100 or so. I have more advice to give but many times I write a detailed response only to have the user never come back. I do check my posts so if you want more ideas just please respond. The tx2-1000 was one of the models affected by the nVidia issue that caused so many HP laptops made in the 2007-2009 era to fail prematurely. 

  • Is there a process for moving costs from maintenance work orders to capital

    Is there a process for moving costs from maintenance work orders to capital projects?
    We have reversed the settlements on the work orders, and then trying to put the relevant NWA in , then receive error message :
    Rule for allocation of PM order to PS network is not maintained.

    hi
    check the allocation structure and the settlement related customization settings.

  • Can anyone recommend a process for moving just my OS and Adobe Photoshop and Lightroom to the SSD?

    I have an early 2011 MBP running Mountain Lion. I just removed the superdrive and added an SSD. I want to use it to boot from and also run Photoshop and Lightroom from. Can anyone recommend a process for moving my OS and those programs to the SSD?

    I'm assuming your doing this because of data you don't want pernament on the SSD as they can' be scrubbed like hard drives can.
    Disconnect any other drives.
    1: Format the SSD 1 partition, click the box, option GUID and OS X extended journaled as the format.
    2: Download Carbon Copy Cloner.
    3: Clone your MacintoshHD partition to a blank powered external drive also formatted the same as above.
    4: Hold option/alt key and boot the machine (wired or built in keyboard) and then select the clone to boot from,
    5: Once in the clone, click it's drive name and change the name if it's the same as the OS X boot volume.
    6: On the clone, head to System Preferences > Accounts and create a new Admin account.
    7: If you need to move files between accounts on the clone, see this. Combine two+ Users Accounts on the same machine   (be careful that your selecting the correct clones other account)
    8: Once your moving files on the clone is complete, then log into the new user account and delete the old user account.
    9: Use Carbon Copy Cloner to clone the clone to the SSD.
    10: Use Disk Utiltiy to repair permissions on all drives.
    The SSD should be moved to the HD slot and the HD to the optical slot and used as a file drive.
    CCC has a option to not include certain folders like the other user account you don't want, however I tend not to recommend things that are not too far out of line with Apple's ways of doing things as it usually results in bad things occuring. Somewhere in OS X it's recorded of that other user account, so it might still show up in logins and such.
    Also you may want to transfer some files to the other account, so that's why I recommend this method.
    Good Luck

  • I have to keep my cursor moving in order for firefox to process.

    If I stop moving my cursor, firefox stops processing. There is a new icon beside the tab title, that is a circle with a dot that travels around the circle and then circle turns green and rotates. Both these will stop moving IF I have stopped moving my cursor/mouse. I dont' have this problem in explorer but I prefer firefox. This just started the second day after I upgraded to newest version. This happens on every page, even logging into email or facebook, I have to keep the cursor moving in order for firefox to process and progress to the next page.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • What is the right process for moving system to another plant

    Dear Guru,
    I have below scenario which i would like to understand what should be the right process to deal with it..
    Organization Structure.
    Company code: C500
    Business area : 500A
    Plant A500 and S500 which is under the same company code and same Business area.
    Storage location: SW01 and AW01 which are physically same location address
    I have this scenario where the user have a PO under Plant S500 which already GR and IR and the physical goods is currently placed in Storage location SW01.
    But the user realized the Material should be created under Plant A500.
    For the above case, can anyone please advice me what should be the better process instead of reversal the IV/GR/PO? and what is the right process for MM and considering also from the finance point of view?
    Thank you very much,
    Regards,
    CheeWee

    Hi
    It is the configuration issue. SOmetime it happens when you copy the Reference plant to your Plant.
    Change the setting and make it both Qty & Value if you really want to manage the stock qty with value then proceed.
    Valuation area is nothing but a Plant.
    karthik
    Edited by: Karthik on Jul 25, 2011 1:23 PM

  • Msi neo2 platinum / venice 3.2 start up issues!!

    hello people,   
    I´ve recently bought and neo2 platinum and a a64 venice, but I´m having problems with the boot up.
    problem: when a turn on the psu swith, (without presing the power botton of the case), the sistem turns on for itself. It doesn´t boot, just turns on, so I have to press the case botton to do so.
    technical data:
    msi neo2 platinum, bios updated to 1.9
    a64 939 venice,
    2x256mb ocz performance rev.2 pc3200
    psu antec true control 550, or topower 400w.
    hdd seagate 80gb sata1,
    msi fx5900vtd,

    Quote from: hull01 on 15-August-05, 09:46:20
    thanks for your help, but it´s still doing it, the cables are all well conected, right now don´t know what I´m gone do, may be try with rma 
    I'm sorry, I wasn't clear.  Your mobo manual will have at least two different LED connections.  Only one is correct for your case. To make matters worse, it's possible that your mobo LED pins and your case LED connectors aren't color coated.  The mobo I have (Neo 4 Plat) was like that.  My Power LED switch on my case was different that what the book showed.  If you have it plugged into the green area on the mobo then try the black area for the Power LED.  Now if that doesn't work then it's something else. Remember after you plug it into the black area, remember to reset your CMOS as before.
    If that doesn't work, did your board come with a D-bracket?  The little bracket with LED lights on it used to diagnostic utility.

  • MSI NEO2 FISRH 865 BIG PROBLEMS

    I have the following problem.  My computer gets jammed after a time (arbitrary moment).  With get jammed  I mean that the screen  freezes and you can nothing more than a reset.  Mostly it happens in Internet Explore.
    My computer:
    Pentium 4 2.6 GHz 800 FSB
    2 x 512 MB DDR400 Ram Twinmos CL3,3,3 in dual
    MB : MSI NEO2-LS FISR2H ( chipset 865 PE) BIOS versie 1.1
    grafic: Aopen geforce 4 MX 440-se
    HD: IBM 80 GB
    wireless mouse and keyboard logitech
    Software
    Windows XP pro service pack 1 (all update's)
    Drivers van Nvidia installed  
    Virusscanner Norton Antivirus ( up to date)
    DirectX 9
    I have tried.  
    * turning off Hyper threating
    *More fans : 3*80 mm fans and 2 x 120 mm fans (placed according to rules
    intake/outtake)
    *replacing RAM and tested with MEMtest86 (no error's)
    *replacing keyboard and mouse with wired keyboard and mouse
    *replacing graficcard with a other brand (same model) and a other brand (differend model)
    *changing hard disk
    *reinstalling windows
    *replacing IDE wires
    *keeping a eye on the temperature (is normal )
    *keeping a eye on the voltage ( normal)
    *replacing power supple with a heavere one
    But nothing helps.  Does some one knows what the problem can be or do i send it back and ask for a RMA.  And buy a motherboard that does work.. : ?(   :O

    foxie,
    My first 865PE Neo2 FIS2r board had BIG problems with on-board LAN, didnt work at all most of the time. No systemcrashes but you could not connect to Internet or LAN.
    But since a PCI networkcard work OK, it wasn´t difficult to RMA it to my lockal computershop. They got the same result. I got a new board that work perfect.

  • MSI Neo2 K8N Platinum - Freezing Issue during games

    First off greetings to everyone on these forums...
    I purchased the MSI Neo2 K8N Platinum motherboard from NewEgg back at the end of March to compliment the AMD 64 "Winchester" processor that I also purchased at that time to replace a slightly older AMD XP "Barton" system that was using the Abit NF7-S motherboard. For the past month I have been fighting an unusual and highly irritating issue that I have noticed during game play and have tried everything that I know of and more in an attempt to remedy this issue, but to no avail. This is the general background of the situation and now I will descibe in greater detail as to what this issue I am referring to is and the symptoms of this issue and some of the various methods used to remedy this issue.
    The issue is that while play a game the system experiences a short 5-10 second freeze during the game randomly, but usually several times an hour. During this freezing the sound would loop and as suddenly as the freeze occurs it would cease and the game would continue on as if nothing happened. However, sometimes this would result in the system freezing outright after this short 5-10 second freeze... but it does not feel like a total system freeze, but rather a video freeze as the sound continues and I still have keyboard control... but this does require me to force a manual reboot of the machine itself. I have scowered the internet and various forums in an attempt to find what the issue was and use various methods to remedy this issue, but so far nothing has worked in my favor... but it does seem like this issue has been plaguing other users with the MSI Neo2 Platinum motherboard. Below are some of the methods that I have used in an attempt to solve this issue:
    *Default Clock for CPU/Memory/GPU; Over/Under Clock for CPU/Memory/GPU
    *Increased voltages to CPU VID, AGP, and Memory
    *Disabled/Enabled AGP Fast Writes
    *Increased AGP Aperture from 64MB to 512MB
    *Enabled/Disabled ATI/nVidia Speedup option in BIOS
    *Forced AGP clock lock to 66-67mhz
    *Relaxed/Aggressive memory timings
    *APIC enabled/disabled
    *Gate A20 turbo/normal
    *Disabled all unneeded onboard components (Realtek NIC, Sound, SATA)
    *Disabled nVidia MAC and attempted to use 3Com Gigabit PCI card instead
    *Swapped HDD Cables
    *Tried PCI Sound Card (SB Audigy2 ZS Gamer) in PCI Slots 3/4
    *Tried video drivers from 71.89 Official to 76.45 beta modified drivers
    *Tried 5.10 official nForce drivers to remixed 7.02 nForce drivers (5.10 drivers uses 4.36 GART, higher drivers uses the 4.40 GART)
    *Applied all the latest updates from Windows Update Website
    *Reinstalled Operating System (Windows XP SP2) 5 different times clean with various settings (APIC on/off, etc...) and different drivers.
    *Installed Audio Card (SB Audigy2 ZS Gamer) with older and the latest drivers available from Creative's website
    *Replaced PSU (Previously was a Thermaltake 420watt PSU, 18A +12v) with a OCZ Modstream 520watt PSU (28A +12v)
    *Video card is KNOWN working from previous build (AMD XP 3000, Abit NF7-S)
    *Hard Drive is KNOWN working from previous build
    *CD/DVD-ROM drive is kNOWN working from previous build
    *Heat is not an issue... all components temperature is well below rated level, the only unknown is the chipset temperature (it has a active heatsink and seems to not be hot to the touch, applied AS5 to it anyway)
    *Used latency tweak to the video card
    *Used Rivatuner to force constant performance level
    *Tweaked BIOS to force even clock rates and forced 1.4v to the GPU Core
    *Used original GPU BIOS
    *Used MSI Neo2 K8N Bios 1.4 - 1.8 and modified BIOS 1.8
    *No background applications are running (not even antivirus)
    *Used application to force maximum refresh rates for my monitor
    *Memory passed MemTest86+ for over 24 hours
    *System passed Prime95 and SuperPi for over 24 hours
    *System seems stable in all non gaming related applications
    *Checked through various troubleshooting procedures
    *Disabled SBDRVDET.EXE using MSCONFIG
    *There are no IRQ conflicts outside of PCI system management sharing IRQ11 with the NIC and USB... in APIC there are no IRQ conflicts what so ever. Regardless neither method worked
    *Installed AMD 64 drivers from AMD
    *Disabled DEP in boot.ini
    *...and many other various tweaks and modifications.
    System Specifications
    CPU - AMD 64 3200+ "Winchester", using Thermaltake Silentboost K8 and AS5
    Motherboard - MSI Neo2 K8N Platinum (nForce3 250GB Ultra) - Using Bios version 1.8
    Memory - 2X 512MB Corsair XMS TwinX1024-3200C2PT (2 Modules, Memory Slots 1 and 2 used)
    Audio - Sound Blaster Audigy2 ZS (PCI Slot 3 used)
    NIC - Onboard nVidia MAC, Disabled Realtek NIC
    Video - XFX Geforce 6800NU 128MB AGP (BIOS Rev 1) - NV Silencer 5 and AS5
    Case - Thermaltake Damier Series 5000
    PSU - OCZ Modstream 520watt (28A +12v rail)
    HDD - Western Digital 1200JB 7200rpm IDE
    DVD-ROM - Lite-On 16X DVD-ROM
    Floppy - Mitsumi 1.44MB 3.25"
    OS - Windows XP SP2/DirectX 9c
    I have been fighting this issue for well over a month now and I am frankly nearly out of ideas, this does not necessarly prevent me from playing games, but this does interfere with the games I do play (especially online games). I do demand absolute stability from the games that I play and this issue only began AFTER I upgraded to the new motherboard, processor, and memory. The only thing I have not tried is something that I do not have access in attempting on this motherboard, and that is increasing the voltage to the chipset.
    Here is my theory on what is going on is that I believe is there is a fault with the chipset on this motherboard and this is manifesting itself while I am playing various games on this system. Of course I would like to try increasing the voltage to the chipset as that would increase stability, but there is no option in BIOS to increase the chipset voltage like the previous motherboard I had (Abit NF7-S). It is possible that either a) the chipset is at fault and is causing me this issue or b) the chipset is not recieving enough voltage.
    My question to the rest of you is this, what do you think the problem is and what ideas do you have that I may try that I have not tried yet. Additionally if there is nothing else that I may try should I attempt to RMA this motherboard and will that help, and is there any other versions of this motherboard that I should be aware of. I would appreciate any response from a MSI representative and any comments from those that may have positive suggestions for my issue. Thank you in advance for your time and any help that you may be able to render.
    The GameMaster...
    *EDIT* Added additional methods attempted... (there was a lot... so I did not remember everything that I have tried)

    Quote from: dacull on 25-May-05, 16:06:33
    Does it only happen in online games, or can it happen in all games? One thing to make sure of is to turn off CRC checksum offload in your NVidia MAC properties (everyone do this, it is incorrectly calculating checksums which leads to servers ignoring your packets). However as you have tried a different network card you can discount this theory.
    For me it looks like the biggest culrpit is your 6800NU, i have read alot of bad things about the NU and you have a low bios revision there, just because it worked well against your old chipset doesnt mean it will work well against your current chipset. Sounds like a BIOS fix is needed as some timing is out somewhere.
    Ensure Spread Spectrum is off (and as you have already pointed out Fast writes, ATI NV Speedup) and your card is running at default clock.
    As a test beg/borrow/steal another graphics card (preferably nvidia) and see how it goes so you can narrow in on your video card.
    It is not just one game, but it is more prodominate in certain games than others... the game in question here is Planetside... though I stuck a demo of Unreal Tournament 2004 on a loop bot match and it seemed to have locked up after 4 hours (not sure how many times it experienced that 5-10 freeze as I went to bed). As for the video card it was KNOWN working from a previous build in those same games (Previous build was a AMDXP3000 and a Abit NF7-S nForce2 motherboard). The only components different in this build is the AMD64, the MSI Neo2 K8N, 2 new sticks of Corsair XMS to replace the Corsair ValueSelects, and the SB Audigy2 as I would never use a software codec audio solution. Spread Spectrum is LOCKED in BIOS and disabled... ATI/nVidia speed up was disabled from the start... and I tried the Video Card at default clock, over clocked, as well as under clocked and the same issue resulted... as I said before it is NOT the video card.
    There are two other things I could try is use my old Geforce4ti 4200 and see what happens... or even try out WindowsXP 64-bit edition as someone earlier suggested. I wish I could find a new BIOS for my XFX 6800NU, but there there is only the revision 1 BIOS that I was able to find. The mystery continues...
    The GameMaster...

  • MSI Neo2 FR and ATI 4870

    does anybody have a similar setup? i seem to be having problems getting my system to boot with a ATI 4870 in, i have tried everything. i even purchased a new PSU but i'm still getting the same result, has anybody came across a problem like this before with this board?
    i dont really see why it would be causing a problem as my current 8000GT runs fine on the board :(
    much thx

    hi thx for the reply
    as far as the board goes its a MSI Neo2 FR this is the one http://global.msi.com.tw/index.php?func=proddesc&maincat_no=1&cat2_no=170&prod_no=1261
    when i try to boot with the HD4870 in i get and error and going by the lights on the board it would be a problem with the graphics interface, green, red, red, red, i replace the card with my old 8800GT and the system boots fine. i know theres nothing wrong with the ATI 4870 card as its been sent back to the place i bought it from and tested and seems to be fine :/
    edit: i also have the latest bois which is v1.10

Maybe you are looking for