Moved TimeCapsule, now it wont mount

Hi All, i'm a Mac newbie, so, i'm learning the ropes.
When i first set up time capsule thru airport, it connected and got a green light.
Yesterday i had to move it to another location in my house. After plugging everything back in, the light is amber. I get internet connectivity thru it, but when i open finder and click on the "Shared", it says "Connection Failed".
Can someone please help me? Thanks.

This is probobly whats wrong. Most Time Capsule users protect their hard-drive with a password, click the "Connect As" in the top right hand corner in "Shared" and type in your password. It should connect. I hope this helped!

Similar Messages

  • I moved from back up folder to iphoto they imported ok but now it wont let me veiw them?

    i moved from back up folder to iphoto they imported ok but now it wont let me veiw them?

    want help - give us details - with what you gave us one can not even make wild guesses
    How did you backup and how did you restore? what versions of iPhoto and the OS. What exactly does "won't let me view them" mean? Why are you restoring a backup? what other details can you provide that might let someone actually help you?
    LN

  • MY HARD DRIVES WONT MOUNT, HELP

    I recently bought the Lacie 250 gig fire 400 (I also have a 160 gig porche hard drive) and it worked for awhile. But a few weeks ago when I turned my computer on the hard drive would not mount. I took my computer to the mac store and the tech tested my fire wire and they were just fine. Then he hooked up a hard drive from the store and they mounted just fine. Now heres the weird part. When I brought my computer home both my hard drives mounted just fine. But here we are a few weeks later and now they will not mount again. I have tried everything possible to mount these drives from changing firewire cords to unplugging everything and still nothing. Now the tech said that he thinks that the computer cant tell the difference between the two drives and thats why they wont mount. I need help bad!!!!!!!!
    G4   Mac OS X (10.4.7)  

    If you have the drive backed up, you could
    try this. With it plugged in and on go into
    disc utility. Check to see if the parent
    drive is visible. The drive that is not
    mounting is considered a volume mount point.
    This is the named volume that you gave it.
    The parent drive will have the name the
    factory gave it.
    Select the parent disc
    and try repairing or verifying the disc
    to see if it helps. As a last resort you
    can erase the disc using no security and
    this will usually get the volume to mount.
    I would install a OS on it so that it is
    more likely to mount.
    It will appear that your volume is empty
    when actually you data is there but the
    directories have been removed.You could
    get your data back with a file
    recovery program.
    I would try the OSX
    forum, they will know a few tricks you
    might try. Only do the erase as a last
    resort.

  • ASM instance wont mount diskgroup..

    HI, I have 10g release 2 installed on CENTOS 4.4, I use ASM striping with with 4 raw disks.
    I had a system crash due to a power failure and now the the ASM wont mount the diskgroup.
    export $ORACLE_HOME=+ASM
    SQL> startup mount;
    ASM instance started
    Total System Global Area 130023424 bytes
    Fixed Size 2071000 bytes
    Variable Size 102786600 bytes
    ASM Cache 25165824 bytes
    ORA-15110: no diskgroups mounted
    SQL> alter diskgroup RESEARCH1 mount;
    alter diskgroup RESEARCH1 mount
    ERROR at line 1:
    ORA-15032: not all alterations performed
    ORA-15063: ASM discovered an insufficient number of disks for diskgroup
    "RESEARCH1"
    now when I use /etc/init.d/oracleasm listdisks I can see all my disks:
    DISK1
    DISK2
    DISK3
    DISK4
    then i tried to change asm_diskstring to point the mounting point, here is my ora file:
    *.asm_diskgroups='RESEARCH1'
    +ASM.asm_diskgroups='RESEARCH1' #Manual Dismount
    *.asm_diskstring='/dev/oracleasm/disks'
    *.background_dump_dest='/home/oracle/product/10.2.0/db_1/admin/+ASM/bdump'
    *.core_dump_dest='/home/oracle/product/10.2.0/db_1/admin/+ASM/cdump'
    *.instance_type='asm'
    *.large_pool_size=12M
    *.remote_login_passwordfile='EXCLUSIVE'
    *.user_dump_dest='/home/oracle/product/10.2.0/db_1/admin/+ASM/udump'
    any ideas?
    Thanks
    Assaf

    Hi,
    by oracleasm lib utility you can configure as below
    # /etc/init.d/oracleasm configure
    Default user to own the driver interface [oracle]: oracle
    Default group to own the driver interface [dba]: dba
    Start Oracle ASM library driver on boot (y/n) [y]: y
    Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
    Writing Oracle ASM library driver configuration: [ OK ]
    Scanning system for ASM disks: [ OK ]
    # /etc/init.d/oracleasm enable
    Thanks

  • Ipod wont mount on the deskntop

    hey
    recently i reset my ipod wid the usual hold on back off and then menu and select for a while, it erased all of my music, thats not the problem, now it wont recognise the ipod and a file with an ! mark on it comes up wen i plug it in.

    Please put your iPod in disk mode, plug it with your Mac. If failed, the simply way is to fix it with a PC - it will mount, do a restore in PC version before re do the Restore in Mac afterward

  • MacBook Pro 17"... JUST REPAIRED VIA APPLE STORE ...CD/DVD Drive wont mount disks

    Macbook Pro (17") wouldn't boot to desktop/homescreen, so I went to Apple. 
    They sent me to Micro Center for data recovery.  Success. 
    After that, back to Apple then they sent me to Best Buy for new Hard Drive.  Success. 
    Back to Apple.  Everything working ok except that my Adobe Creative Suite programs no longer work. 
    So I try to reinstall via data CD, as I did when I originally installed the programs, but now my CD/DVD drive wont mount ANY disks!
    It accepts them, makes some odd noises, then spits back out.  Please help! 

    I'm confused, why did Apple 'send' you to 2 non Apple places for repairs? Did you buy the product from Best Buy? It doesn't seem like Apple made any repairs, so you'll have to get either Micro Center or Best Buy to repair the issue for you.
    How long ago were these repairs?

  • External Lacie 1tb hd wont mount

    My Lacie 1tb hd quadra wont mount via firewire 400 with my iMac 17" intel c2d. The odd thing is that it mounts with usb with no problems and not firewire. I will try it on my old iMac G4 via firewire 400 but for now I need for my time machine backups. If anyone could help that would be great thanks!
    BTW: I am checking it with disk utility, but i am not really sure if that will do anything

    ipodmacdood wrote:
    My Lacie 1tb hd quadra wont mount via firewire 400 with my iMac 17" intel c2d. The odd thing is that it mounts with usb with no problems...
    It may well be your Firewire support in the external drive is not functioning.  This happened to me when my LaCie Rugged Firewire 800 was non-functional although Firewire 400 and USB were fine.  LaCie Canada wouldn’t touch it as I had bought the drive on a trip to the US (while on vacation I only used the Firewire 400 connection and thought all was fine; coming back to Canada I discovered the flawed Firewire 800).  Lesson learned: I’ll never buy LaCie again.  We still use the drive daily via Firewire 400.
    Recommend returning the drive immediately to the vendor/manufacturer.  Your next drive may be perfect so don’t delay while you have warranty.

  • TC doesnt recognize my backup yesterday and wont mount

    hi
    i got my 1TB TC from amazon yesterday, connected it with my imac with ethernet cabel and started to backup my imac (413GB). all was fine. he started to backup, mounted the TC disc
    and i got round 2,5GB in 5min. then i read i can stop that backup and continue tomorrow
    as i went to bed and didnt want to leave on my imac.
    today i booted my imac clicked on "backup now" and it began from beginning, why?
    also the TC disc wont mount today. i am confused. cant i stop and continue the backup?
    thanks for help

    i found out when i click on "start backup" he builds a new sparse image. i stopped now,
    i think i have to wait until the time counts down in the control panel.
    it says "next backup" in 45min.
    is it possible to limit the backup in the future to 2 sessions per day
    and to spin down the disc in the TC if it is not needed? its kind of loud in my living room.
    thx

  • XserveRaid (14drive model): Left Side now won't mount?

    I have a 14-drive Xserve RAID. It's been working flawlessly for at least two years. Today, I moved the rack across the room, to slightly redesign the office, and when I restarted it back up, the Left Side now will not mount.
    It's full of drives, seven on each side. Raid 5. Connected to G5 PowerPC, with 10.5.6 installed.
    The left side power light comes on, but after the right side boots and mounts as normal, the left side continues to show a constantly blinking light on the front, with the icon that appears to look like a "guitar head", or Fiber Channel icon. The other three indicator lights on the left side are also GREEN.
    I disconnected the fiber channel cables from the back of the Xserve, and the left side fiber channel icon continues to blink.
    The right side mounted just fine on the Desktop, as normal.
    When I look at Fiber Channel control panel in 10.5.6 System Preferences, the Left Side shows red light and the Right Side shows green light. Red Light means disconnected.
    Are there any other diagnostics that I can do today? Of course, I need to be working on files that are from the left side...
    Here is a screengrab from the System Prefs:
    http://199.237.236.200/temp/fiber.jpg
    Thank you.
    Mark Tucker
    http://www.marktucker.com
    mark at mark tucker Dot com
    Message was edited by: Mark Tucker

    Hi Mark
    It's a good job you have a backup. It's even possible the controller might be failing? Perhaps the move is purely co-incidental? You could also swop the controllers to see if the problem follows the controller? Although I would leave off doing that just yet.
    Reseating the controller is a useful thing to do as over time they can - sometimes - work themselves slightly loose. You've probably had the thing on 24/7 for 2 years so only a shutdown followed by a move could possibly make this apparent? If you search the forum you should find similar situations to yours.
    Tony

  • TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

    Click here and follow the instructions.
    (98897)

  • Satellite U400-14B shuts itself off and now it wont start up

    Hi
    just got a new Satellite U400 this week.
    Was working perfectly the first few days, then last night, it just shuts itself off and now it wont start up.
    I press the on button and the row of lights next to it light up, but nothing happens I dont even get as far as the Toshiba screen.
    I have tried many things. I left it plugged in overnight, tried taking the battery out and no result as of now.
    The little led lights on the bottom indicate that there its plugged in, the battery is white not orange, when pressed they all light up again only for a split second.
    The only thing I can liken this too is when a car wont start and you keep turning and turning the key, well in this case pushing a button, and nothing happens, the fans dont whir or anything...
    help please...

    Has extra Memory (RAM) been installed? Try removing one Memory Module and try a different Memory Slot.
    If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.

  • I just got a macbook air for xmas- now i wont get texts on my iPhone. they go right to my laptop. how can i get the texts to go to BOTH devices?

    My hubby just got me a macbook air for Xmas which is awesome.  Set it up to be able to ichat on it as well as on my iphone.  Only now i wont get texts on my iphone- ONLY on my laptop.  How can i configure so that I can get texts on my computer AND my phone. NOT just one or the other? Please help!

    Hi,
    The Mac version will use your Apple ID as the first and only choice...
    ... Until you add the same Apple ID to Messages on the iPhone.
    Once this is done it is best to Restart the app on the Mac.
    This will then get at least one, possibly two pop up saying the iPhone in using the Apple ID and the iPhone Number.
    Accepting these Pop ups will enable the iPhone as an ID to be used in the Receive At List.
    It will also appear in the drop down at the bottom for "Start New Conversations from"
    If you did not set iyt up like this then remove the apple ID from the iPhone in the Settings > Messages.
    Place the iPhone in Airplane mode to break with the server.
    Take it out of Airplane Mode and re-add the Apple ID in the Messages settings.
    Then Restart the app on the Mac as above.
    Having done this you can still turn Off the Apple ID on the iPhone (receive as the iPhone number only) or disable the iPhone Number on the Mac (receive Apple ID stuff only)
    The Start New Conversations option on the Mac version means you could use the iPhone number so people don't get your email.
    8:26 pm      Thursday; December 26, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • The new itunes update will not install properly and now itunes wont work at all

    k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

    My issue is it wont even reinstall onto my computer
    Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
    If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet "

    iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
    I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
    This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
    Thank you.
    -Kait
    My phone is the iPhone4 and my computer is a Windows Vista

    I doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
    Otherwise, do you get an error code? This might point us in the right direction.

Maybe you are looking for