Moved to a New Mac...it created a brand new time machine file?!?  Why

It seem since migrating to my new MBP, Time Machine does not recognize my old TM file that has been continuous for over a year. So, not to mention taking an additional 100GB on my Ext HD, there is no continuity or access to older TM files.
Any fix for this? Or just I just delete it and be done with it and get my 100GB back on my Ext HD?

Brad,
*_Time Machine Always Performs a Full Backup After a Full Restore_*
Actually, this is normal. Anytime your hardware has changed, or you have reinstalled the operating system again, Time Machine will perform a new full backup. Consider the following according to the KB article below:
*Full Backup After Restore*
Bear in mind that in all cases Time Machine will perform a full backup after a full restore. This is normal. Time Machine will resume incremental backups after the full backup has completed. To view previous backups, Control-click or right-click the Time Machine icon in your Dock or Option-click the Time Machine menu extra and Choose "Browse Other Time Machine Disks," then select your previous backup volume. You will enter Time Machine and be able to browse your previous back ups and restore files. [http://support.apple.com/kb/TS1338]
So even on unchanged hardware, if you reinstall your system software and restore your user data, Time Machine starts anew, and you will not be able to resume backing up with the same history as the previous backups.
While there may be ways to fool/hack Time Machine into recognizing previous backups without performing another full backup, they are likely rather elaborate.
Ultimately, though, in a couple of months, all the effort to preserve old backups may seem pointless. After all, Time Machine will eventually purge away that data anyways as it replaces it with new files.
It may simply be easier to begin a fresh series of backups while saving the previous backups until your satisfied that you have enough history built up. Then delete the old backups.
Hope this clarifies some things.
Cheers!

Similar Messages

  • Brand new Mac user with a brand new Mac problem!

    Hi Everyone --
    I am a brand new Mac user... I've only had my MacBook Pro 13" for three days. My Mac has been continuously freezing while I use it. When it freezes I only have safari running so I know its not from application "overload". Once frozen, I cannot move the mouse, "esc" or use any commands. Essentially my only option is to force it to shut down by holding the power buttong down. Please let me know if anyone has any idea how to fix this! With school coming up I cannot afford for my computer to be freezing every 20 minutes!
    Thanks in advance.
    -Rachel

    Well... I'd still take it back - let them know that you received it as a gift three days ago. They may still replace it for you or they may take it in for repair. Just be nice and explain that you don't expect a new MBP to function as it is (or malfunction) and let them, at least, run diagnostics on it. As it's so new, there may be something simple that they can fix as you wait. Did your boyfriend already register the machine with Apple or did you? They may take the registration date into account...
    But I'd take it to the Apple Store, regardless...
    Clinton

  • With a new Mac, can you join your previous Time Machine backups?

    I'm sure this has been answered elsewhere, but my searches couldn't find a specific answer.
    So here' the deal.  I got a new rMBP to which I transferred data (via a Time Machine backup) from my old Macbook Air.
    Am I correct that on the new computer there is no way to "rejoin" the previous backups and that a new Time Machine backup "thread" must be started?
    Assuming that's the case, I'm guessing you also should delete the old TM backup files since they'll be useless).
    Thanks.

    *No, what I want is the ability to continue backing up to my existing Time Machine drive when I upgrade to a new computer.*
    I think your scenario is possible with one single possible problem - the first time you plug the TM hard drive to the new computer it will want to copy the entire hard drive. If your TM can't hold the old computer's backup files and the entire contents of the new computer you have a small problem. But it it can then you wind up with two backups, one from each computer. However, when you need to restore from your TM files, my understanding is, you can pick from any computer's backup files. In other words, you don't lose anything. It just isn't as smooth as what you want. After a couple weeks have gone by and you are sure your computer is working fine and is stable, you can erase the folder containing the old computer's TM files because you've already developed a couple weeks of your new system.
    If your TM drive isn't big enough to back up the new computer, I'm not sure what your options are other than to buy a new bigger hard drive, clone the TM files onto it and then do as I suggested above.
    Remember, TM is a version 1 product and we've plenty of proof that Apple is listening to us. Use feedback to describe your scenario and how you want it to work. Version 2 may well incorporate some of your desires.

  • New Macbook hard drive can't locate Time Machine files of backup on external drive

    I just got my hard drive replaced as it was failing.  Just before I took it to the apple store I backed up my hard drive using time machine, on a separate hard drive: phew!  I checked that time machine was operating fine before I took it in to get the new hard drive - it was fine, I was able to "go back in time" and access my files.
    I tried to reload from time machine as soon as it started up, but it wasn't working, so I figured I'd just work on transferring the files after I booted up. Now I have a new hard drive and then plugged my external hard drive with the back up stored on it into my computer, but it cannot get the backup on my fixed macbook! It says it can't find it, and when I've looked at the disk in Finder (in backups.backupdb) it shows as a folder of my computer's name, and the only file inside is It is called: 2013-11-22-133614.inProgress (not even the correct date of the back up!).
    Now time machine won't go back in time any further than the age of the new hard drive.
    I can't understand that it seemed to be there, but now it is incomplete - this is ridiculous!
    What has happened?
    Has Time Machine failed me?
    Are the files there somewhere hidden away?

    Check here, Pondini has extensive info on TM:
    http://pondini.org/OSX/Home.html

  • What are the steps to uninstall Creative Cloud on a Mac and create a brand new re-install

    I am having problems with my Mac OS system disk and have decided to re-format the disk and start again.
    However I have noted numerous members who have removed Creative Cloud products only to find when they wish to re-install being informed that the software is already on their disk.
    Therefore, what I need to know, is what exactly is the procedure that will allow me to erase my disk, re-build it and then download a new copy set of the Creative Cloud software?
    I don't want, when I have rebuilt the hard disk, to be faced with the statement that I already have Creative cloud on my disk ... when in fact I have erased it.
    Thank you.
    James.

    You want to do two things:
    Deactivate the installed programs via the Help menu.
    Uninstall the programs from the links provided in the folder Applications > Utilities > Adobe Installers.

  • How can i restore my entire iTunes library onto my new mac book pro from a previous time machine backup?

    after using the migration assistant, it appears that only my iTunes purchases loaded into my library on the new MCB, not allllll the other mp3's i've loaded in from other sources, although they are sitting in the back.up folders on my external drive. those mp3's have to be opened manually to get them back into iTunes. there has to be a more effiecient way to load these tunes right?????

    The second Article guides you to copy the whole iTunes Folder which will include linbrary and all media type:
    Here is the iTunes folder structure

  • I just purchased a one year old iMac.  How do I create a brand new admin account?

    I just purchased a one year old iMac.  How do I create a brand new admin account?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • HT2470 I need to change the home folder name. I just bought this mac today and my cousin put his name in because he had to back up his phone while we were still at the store so he could get a new phone and now my brand new imac says his name in the home f

    I need to change the home folder name. I just bought this mac today and my cousin put his name in because he had to back up his phone while we were still at the store so he could get a new phone and now my brand new imac says his name in the home folder. This is very frustrating. I would not have let him put his name in there if I didn't think you could change it. Someone please help!

    Delete his user account and create your own, using your name.

  • Will a Mountain Lion install USB work with putting Mac OS on a brand new hard drive?

    My MacBook Pro's hard drive has crapped out and I'm planning on purchasing a new hard drive for it.  However, this new hard drive will be completely clean and no remnants of Mac OS will be on it when I receive it.  But before my hard drains crapped out, I made a Mountain Lion install USB like the one made here: http://osxdaily.com/2012/02/17/make-bootable-os-x-10-8-mountain-lion-usb-install -drive/ .  If I install this new hard drive into my MacBook Pro, turn the computer on, and hold down the Option key, will I then be able to install Mac OS with this USB drive?  If not, please explain the steps that I need to take in order to successfully install Mac OS onto a brand new hard drive.
    P.S. I do not have the install disc from when I bought my computer.

    You can use the USB drive you created previously to install OS X in your new hard disk. Also, you can use Internet Recovery, if you want to > http://support.apple.com/kb/HT4718
    After installing the hard disk and starting from the USB drive, follow the steps to reinstall OS X. If there isn't any partition on the hard disk, close the installer and open Disk Utility.
    Then, choose the hard disk at the top of the sidebar, go to Erase tab and erase the disk. After erasing the disk, close Disk Utility and reinstall OS X

  • I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor.  The new Apple monitor is fine.  On the cinema monitor everything is blown up pretty large.  Any ideas on how to solve this?

    I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor.  The new Apple monitor is fine.  On the cinema monitor everything is blown up pretty large.  Any ideas on how to solve this?

    The 30" display needs a DUAL-LINK adapter.
    <http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

  • HT6114 my audio is being funny on my mac. It is brand new, and hasn't had trouble since this update. It gets stuck at full blast with a / though it. then no audio comes out. Once I turn it off it fixes it self thouhg.

    my audio is being funny on my mac. It is brand new, and hasn't had trouble since this update. It gets stuck at full blast with a / though it. then no audio comes out. Once I turn it off it fixes it self thouhgh, or if I wait a while it finally fixes it's self. If this happening to anyone else?

    I don't think that is normal behavior. The long press is possibly causing the system to force power down, which would then allow it to power back up.
    Just to make sure, all drivers are up-to-date? Are there pending BIOS updates? If so, you'll want to make sure it can restart properly before applying the BIOS update
    Try an Ubuntu LiveUSB or LiveCD to rule out software issues.
    If that doesn't work, try taking out the battery and AC, pressing the power button ten times, then holding it for ten. This is usually the remedy for another issue, but try it anyway.
    If that doesn't work, then try resetting the BIOS settings. Then try unplugging the CMOS battery overnight. Otherwise, might have to call for warranty.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • My apple ID is now being used for facetime on a new mac. I have no new mac

    Hello
    My apple ID is now being used for facetime on a new mac. I have no new mac

    If you recently did an upgrade to Yosemite (and if my memory is correct) you may have signed into FaceTime (without using it) as part of the upgrade.

  • Do i need to create a brand new apple id just to make a new icloud email address?

    I made my new iCloud ID under my apple account that i have been using for years, but now I am wanting to change my iCloud ID ([email protected]) or make a new one. Do I need to create a brand new apple ID just to get a new iCloud ID?

    See the frequently asked questions below to learn more about signing up for and using an iCloud account.
    http://support.apple.com/kb/HT4436

  • How can i create a brand new account without a credit card ?

    how can i create a brand new account without a credit card ?

    There are instructions on this page for creating an account without giving a credit card : http://support.apple.com/kb/HT2534

  • Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file hav

    Had hard drive renewed due to product recall (iMac) backed up complete system on time machine . Had the drive done got mac back tried to reinstall from time machine .The new drive tells me that the space has been taken up but can't find where the file have gone. Need to free up the space that the ghost file take up so I can drag drop from ex drive onto harddrive

    Here's the scoop, new friend.....
    When you boot into Time Machine you'll get the same OS X Utilities screen as you would if you booted into the Recovery HD. So, from there go into Disk Utilities to erase/format your internal drive. After that's done, back out to the OS X Utilities screen and select the restore option. Just follow the prompts to select the TM back up date you want to restore from and where to restore it to. Pretty straight forward.

  • I am going to buy a bigger hard drive. i am operating on Lion. how do i install my os on the new disk? i can't use time machine.

    i am going to buy a bigger hard drive. i am operating on Lion. how do i install my os on the new disk? i can't use time machine.

    Plug this new drive as an external drive, boot from lion recovery "command-R" more info here: http://www.apple.com/macosx/recovery/
    Open disk utility, format and partition the disk at your will (allways Mac OS plus...) and go ahead with the install, don't care if it tells you to whait thousands of hours, I did get installed in 2 hours and a half last week.
    If you can't plug the disk as an external one, you'll have first to do an USB disk recovery utility, as easy as download the recovery utility and install it in an USB disk, you can find anything from the link above, plug the disk as a single master, and boot from the USB you created before.
    Tell me how it went!!!

Maybe you are looking for

  • How do I reinstall mac os x 10.5.8 without a full install dvd?

    I am needing to reinstall Mac OSX 10.5.8 but don't have the original disk the macbook came with. I have tried using a Snow Leopard full install DVD but I keep getting the error message of "OS X cannot be install on this macbook" (paraphrased). I have

  • ITunes 10.5 won't load on Win 7

    I have uninstalled, reinstalled, tried to repair. Nothing is working.  Now I get a message that says I don't have access rights to the folder and to log on as administrator. I am logged on as adminstrator.  I have found a few suggestions, such as the

  • Inserting all manner of characters into database

    Hello friends, Consider this code snippet of mine: String sentence = "My name is nameless aka 'anonymous' or \"anonymous\" ('did I hear that? Maybe!! now where were we?') -\"yawn! Am bored..."; PreparedStatement statement = connection.prepareStatemen

  • Java.lang.IllegalStateException: Attempt to mutate in notification

    I get this exception sometimes when I change a value in a row of a JTable in a JClient. But I don't understand when the exception is called. Can somebody explain me what this exception means and how to avoid this?? The next lines are from the stack-o

  • Chat ID history

    Hello, I understand that we are not able to retrieve any chat history from the skype network. But is there a way I can prove that I did or did not have a conversation with a certain ID? I need it for legal problems and would appreciate a quick respon