MOVED: What is the Safe OC (base clock) for MSI Eplices plus?

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=130206.0

Hi tancheeru, & welcome to the forum. As this is an OC question, the mods will probably move it to the OC & Modders Section of the forum. Please provide a signature with your systems components. It is difficult to make suggestions without it. In most cases I have experienced, base clock at 166 or 167 will most of the time work on default voltage. However, RAM must be adjusted to compensate for it's increase in speed as base clock is increased. This may involve the Mem. Ratio, Uncore Ratio, timings, & DRAM V. 

Similar Messages

  • What is the Safe OC (base clock) for MSI Eplices plus?

    Default Base clock for this board is 134. How much can i go still consider as safe OC?

    Hi tancheeru, & welcome to the forum. As this is an OC question, the mods will probably move it to the OC & Modders Section of the forum. Please provide a signature with your systems components. It is difficult to make suggestions without it. In most cases I have experienced, base clock at 166 or 167 will most of the time work on default voltage. However, RAM must be adjusted to compensate for it's increase in speed as base clock is increased. This may involve the Mem. Ratio, Uncore Ratio, timings, & DRAM V. 

  • What is the safe music listening level for regular and in-ear headphones?

    I am wondering what the safe music listening level for regular and in-ear headphones is. I heard it was 50% volume for regular headphones but what about the new 60$ in-ear ones? I am going to get them soon.

    Just turn it up enough for you to enjoy the music. Even prolonged low volume sound can have long term negative effects on your hearing. It also depends on your listening environment. In a dead silent room you won't need very much volume. I have my cranked pretty high on when riding my motorcycle to work.  Just don't take your hearing for granted. Constant ringing in your ears will suck.

  • What is the best wireless base station for a clamshell?

    i want to purchase a wireless base station for my clamshell but am unsure on which apple product to buy. do you recommend the airport extreme or just the original airport. i've heard from some people that the extreme doesnt' work that well.

    The perks of the airport extreme base station are Wireless B/G/N compatibility as well as a USB port for sharing external harddrives, printers, etc.
    Your ibook is only compatible with Wireless B networks, so there is no sense in paying for G/N compatibility unless you really need it. The same holds true for the USB port in my opinion. Unless you need it why pay for it.
    The original airport base stations are cheaper, and they do exactly what you need them to do.
    That's my two cents
    Vince

  • What is the safe mode key for 875p neo board

    can you please tell me what the safe mode key is for this board as F8 key in xp pro wont do?
    regards,
    bunter

    Quote
    Originally posted by CROBBO
    @ Assaf correct  
    I tried your suggestion and you were correct again thanks m8  
    I have Built many Pc's first time using an MSI mobo, I have been fault finding and have many problems.
    So Assaf going to need some more of your knowlage please.  
    I have the utils infoview & wminfo and I have big problems.
    Number of Proccessors: 2?  
    External Clock: 200MHz  
    Current Speed: 3200MHz  
    Device manager confirms this in Win XP Pro SP1, Tried uninstalling one of the cpu's reboot and it's still their 2 cpu's
    Some help would be very nice TA!
    TIA  
    Regards CROBBO  
    theres nothing wrong with those readings m8.
     you have 2 processors because of hyperthreading. windows sees it at 2 separate cpus.  you external clock is your fsb, which should be 200. this is quadpumped so essentially it is 800mhz, then your current speed is your cpus clock speed and since you have a 3.2p4 E it tells you its running at 3200mhz = 3.2Ghz  

  • I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Ado

    I am struggling! Help! I need to move 3500 pics-in TIFF format in 175 folders and sub folders from my old PSE6, Windows XP to my new PSE13, Windows8.1. I have the PSE6 backed up on an external hard drive. What is the safe way to do this? Can anyone at Adobe help me? Please?

    Use the Organizer backup & restore method, starting the restore from the TLY file. Probably best to use a custom location as the XP file structure will be different. See this link for further help:
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • How to maintain decimal places in BOM Qty & what is the essence of base qty

    Hello PP members
    How to maintain decimal places in BOM Qty & what is the essence of base quantity in BOM ?
    Thank You

    ur first question is not understood, You can have maximum of 3 decimals in BOM item qty.
    Base qty is the qty which is refered to all the BOM items.
    example -
    Product X, base qty 1
    Raw material 1 - componen t qty= 1
    Raw material 2 - Component qty= 5
    This means To produce Product with qty1, it needs raw material 1 qty 1  and raw material 2 qty 5.
    This means To produce Product with qty10, it needs raw material 1 qty 10  and raw material 2 qty 50.
    This is the meaning of Base qty..it is the referece qty refered to all the components.
    About the decimal places
    let us say  example 2
    To produce Product with qty1, it needs raw material 1 qty 1  and raw material 2 qty .0001.
    When you enter this in SAP for the raw materialm 2 system will give error message that you  need to enter the qty with maximum 3 decimal places, hence you need to enter as below
    Product with qty10, it needs raw material 1 qty 10  and raw material 2 qty .001.
    This is how you need to adjsut the base qty and component qty with decimalplaces moer than 3,
    pl come back

  • What are the safe limits of current and voltages

    What are the safe limits of current and voltage of an ac signal to the NI USB 6008.

    Hi hanan,
    current is voltage/resistance. There surely a resistance is given too...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • What is the relationship between BASIS and XI?

    what is the relationship between BASIS and XI?
    whether we have to acquire knowlege to explore BASIS for XI

    HI Gabriel
    BASIS is the administration of SAP system, BASIS team will be responsible for installation, maintenance, transport, authorizations in the SAP system.Taking care of the Server in all the situation,applying Support Packages, patches,fixes, Monotioring the Jobs.Participate in requirements gathering, assessment, design, configuration and testing activities for SAP security and other issues
    XI is also a middleware.
    The work of XI Basis starts from installation of XI server and it inculdes many system related things such as Installing Adapter framework, Maintaining RFC connections, Roles and Authorization, Updating Patches etc....
    Check this link on Management of XI and go through it completely. You will ahve clear idea about the role performed by XI Administrator or XI Basis:
    http://help.sap.com/saphelp_nw04/helpdata/en/a3/c6d931767dbb4d8a2696b9c72431a9/content.htm
    Also refer this thread on XI Basis work:
    Basis activites for XI
    Cheers..
    Vasu
    <b>** Reward Points if found useful **</b>

  • What is the difference between base method 0002 and 0011

    Hi,
    could you please explain what is the difference between base method 0002 and 0011?
    0002: Ordinary: no automatic depreciation
    0011: Ordinary: percentage from useful life
    if we assing base method: 0002 in dep. key? what will happen in future?
    if we assing base method: 0011 in dep. key? what will happen in future?
    please clarify my doubt.?
    Thanks
    Indu

    Let me clear, I have bought WinSL 8.1 SNGL OLP NL Acdmc Legalization GetGenuine (part
    No - 4HR-00400). It means my machine has legal OS and I can use it and I dont need to buy WinPro
    8.1 SNGL Upgrd OLP NL Acdmc (Part no. - FQC-08173).
    is it?
    I believe that is correct. There should be no reason to buy both licenses for one machine. You should verify this with your reseller or MS.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

    Hi,
    I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
    I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
    Dr. Kirco Arsov
    Solved!
    Go to Solution.

    Hi Kirco,
    I have some more information for you :-)
    I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
    As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
    From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
    TB_0_LevelEdgeReg :: Offset 0x660
    TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
    7..6: EdgeMode
    5..0: LESel
    LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
    EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
    TG_0_CombinationReg :: Offset 0x6A0
    TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
    19..16: CombFunction
    5..4: CombTypeB
    1..0: CombTypeA
    CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
    CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
    CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
    All of the other bits should be set to 0b0.
    Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
    Joe Friedchicken
    NI VirtualBench Application Software
    Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
    Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
    Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
    Senior Software Engineer :: Multifunction Instruments Applications Group
    Software Engineer :: Measurements RLP Group (until Mar 2014)
    Applications Engineer :: High Speed Product Group (until Sep 2008)

  • What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

    I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

    I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
    The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
    Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
    Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
    Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
    When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
    Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

  • What is the reasonable battery count cycle for a new macbook pro?

    what is the reasonable battery count cycle for a new macbook pro? I just bought it and i found that the count cycle for the battery is 6, is that normal?

    First off, a MacBook Pro is not a Power Mac.  Power Mac is the nomenclature for Apple desktop machines prior to mid-2006.   Mac Pros also are desktops, but later than mid-2006.    http://www.apple.com/batteries/ covers Apple notebook batteries and other battery performance.  I've asked this thread be moved.

  • What are the optimal hardware specification requirements for Adobe Photoshop CS6?

    Greetings to the staff and users of this forum,
    As the title clearly stipulates, the question is "What are the optimal hardware specification requirements for Adobe Photoshop CS6?".
    Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
    I've been through two chat rooms and four telephone operators to always get the same answer: the specs on the website.
    If any user here could provide me with proper higher specs, I would really be grateful.
    Thanks,
    phdwengr

    This document looks at different workflows and gives recommendations. It should give you an idea of what's needed.
    http://blogs.adobe.com/jnack/files/2012/07/CS6_hardware_recommendations.pdf

  • What's the best voice recorder app for an iPad mini?

    What's the best voice recorder app for an iPad mini?

    All of the "Office" document editing applications on the iPad have limitations.  Best try them out to see if they meet your needs.
    iWork by Apple
        Keynote
        Numbers
        Pages
    DocsToGo
    • VIEW/EDIT/CREATE Word & Excel files(Office 2007/2008/2010)
    • VIEW PowerPoint, PDF, iWork, Text, .RTF, and more!
    • Send & receive attached supported documents using the built-in Mail app
    • FREE desktop application with your purchase! Compatible on Win & Mac allows you 2-way file sync with a WIFI connection.
    • Open & Edit files within DocsToGo from any 3rd party app that supports the “Open In” feature
    • Supports iTunes File Sharing via USB cable for manually moving files
    https://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
    Office² HD
    "Office² HD, the most intuitive and straightforward office document editor available on the iPad, makes it easy to open, view, create and edit Word (DOC & DOCX), Excel (XLS & XLSX), and PowerPoint (PPT & PPTX) files right from your iPad!"
    https://itunes.apple.com/us/app/office2-hd/id364361728?mt=8
    Quickoffice Pro HD
    Create and edit ALL Microsoft® Office -- document, spreadsheet, and presentation formats, as well as view PDF files, on the go. Our advanced file manager lets you manage local files, access Google Drive or other cloud accounts, and works with your iPad email attachments so you can work anywhere, anytime - online and offline.
    https://itunes.apple.com/us/app/quickoffice-pro-hd-edit-office/id376212724?mt=8
    nsdjoey presents ways to edit office documents in this web page:
    https://discussions.apple.com/message/21953221#21953221

Maybe you are looking for