MOVED: What we need - a guide on how to flash bios, setup bios, and raid

This topic has been moved to AMD64 nVidia Based board.
What we need - a guide on how to flash bios, setup bios, and raid

Like How to Flash Bios NVidia 64 & Award Bios
Syar2003 has also documented flashing methods in the Bios Collection. *Updated * 7025 1C3 EasyBIOS [r.2] thread
BIOS Guides pretty complete as far as Neo3 250/Ultra but as none of the pps who have been involved in the stickies have neo4's that chipset is lacking.
Raid Guide
If any1 wants to re-write /update these please feel free to write up the topic as a new thread  thread & if popular we can add a link to the thread.
Volunteers welcome 

Similar Messages

  • What we need - a guide on how to flash bios, setup bios, and raid

    Ok, a topic I see very often on many forums, and several times here, is the following; How to flash bios, how to setup the bios settings, and how to setup the raid array, and then setup the bios to boot from the raid array. Could we perhaps pull our heads togheter and write a detailed guide on these three topics, taking into account how to do it on the most used (commonly written about) MSI boards? and perhaps put as a sticky?
    It would help many novice users trying to deal with these problems. I am willing to write on the subject of flashing bios on the MSI K8N SLI Platinum and how to install a Bios Saviour.

    Like How to Flash Bios NVidia 64 & Award Bios
    Syar2003 has also documented flashing methods in the Bios Collection. *Updated * 7025 1C3 EasyBIOS [r.2] thread
    BIOS Guides pretty complete as far as Neo3 250/Ultra but as none of the pps who have been involved in the stickies have neo4's that chipset is lacking.
    Raid Guide
    If any1 wants to re-write /update these please feel free to write up the topic as a new thread  thread & if popular we can add a link to the thread.
    Volunteers welcome 

  • What we need to see in the next Neo Platinum 250GB BIOS revision.

    We need 0.5 increments in the LDT speeds, and 0.5 multipliers too, there's no reaosn for not including them seeing as other boards have them, and all you're doing is limiting our overclocking options and therefore our enjoyment of the board...  
    Anyone else got any ideas for what we need to see in the next BIOS?

    MSI PLEASE SORT THE TEMP READINGS OUT! Sorry for caps but this is beyond a joke.
    K8T + 3200 @ 2.32ghz 1.61v = 46C load
    K8N + 3200 @ 2.24ghz 1.56v = 61C load!!!!!!!
    Thats just insane.  

  • How to flash Neo4-F BIOS

    My Neo4-F will be arriving soon, and will probably be v.1. I will be using it with an Opty 180 cpu, and an 8800 GTS 320 gpu, 2 mb ocz memory, 700W OCZ gameXtream psu.
    I would like to flash it with the latest modded Bios, one with all options opened for changing. Does Syar have one, or, if not which modded Bios version could I use?
    The second question is how to flash it? My Neo2 Platinum was flashed with Syar's latest 1.c3 by using Winflash - excellent, never got any problem with it, but will it work with Vista 64 and the Neo4-F? If not what would be the simplest way to flash the BIOS?
    Thanks in advance,
    Jose

    Quote from: jose_ramos on 21-May-07, 20:46:03
    Hi Chippy, please let me know how you get on.
    I will be doing a clean install. All my data is in a second independent HD, so no need to do an upgrade which people say is somewhat troublesome.
    One question I have though is that since Vista is on the main HD, when I shift from Neo2 Plat. to Neo4-F, is it possible to keep present installation? Maybe not.
    I am not worried about my data.  That's no problem and its all backed up anyway.  The "problem" is Windows and all of the (100's of) applications  I have installed.  I could not bear having to reinstall everything again, hence why I will be doing the "upgrade" rather than a clean install.
    Chip

  • I have my home page set. What I need to find out how to set it so that every tab I open, it opens to my home page instead of a blank tab/page.

    I use Firefox at work. We have a standard home page we use. In IE all my new pages open at our home page. With Firefox I have my home page set, but all new windows I open, open as a blank tab/blank page. I want to have all my new windows/tabs to open to my home page.

    You can always just middle-click or ctrl+click on the home button to open it in a new tab.
    For exactly what you're asking for, there's an addon for that:
    * https://addons.mozilla.org/firefox/addon/new-tab-homepage/

  • My screen on my phone is in a disabled mode and i cant get into my phone. i need to find out how i wipe my phone clean and start over

    my phone is in a diabled mode and it cant get into my phone anymore. i need to clear my phone off threw itunes but cant seem to figure it out

    http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

  • Need urgent help on how to compare the user profile and process form attributes

    Hi All,
    We have a requirement  where after editing the  user profile attributes we have to compare the currently modified user  profile attributes and the existing     
    process form attributes and based on the differences we have to update the  process form accordingly.
    We have around 80 attributes so we cannot follow the procedure where
    we update the lookup process_triggers
    and add the "change attribute" task
    and "update attribute" taskin the process definition
    because it creates aroung 160 tasks in process definition. So we are doing it by writing a custom code. Is there any other simple way to do it or any API"s which can help us.
    Need very quick help.Thanks in advance.
    Regards,
    Geetha

    Check MOS: 1595938.1
    -Bikash

  • Help C# Hi, i have studying for 3 weeks and i need some help. How can i sort case 2 and display that with dinamic array?

      //Meny
                Console.WriteLine("\n HÄNGA GUBBE\n");
                Console.WriteLine(" 1) Lägg till ord");
                Console.WriteLine(" 2) Lista alla ord");
                Console.WriteLine(" 3) Spela");
                Console.WriteLine(" 4) Avsluta");
                int valet;
                Console.Write("\n\tVälj 1-4:  ");
                valet = int.Parse(Console.ReadLine());
                switch (valet)
                    case 1:
                        Console.WriteLine("\n lägg ett till ord! ");
                        break;
                    case 2:
                        Console.WriteLine("\n Lista med alla ord :\n");
          char[] array = { 'lev', 'skratta', 'gledje', 'gråt', 'njut'};  
                Array.Sort<char>(array);
                foreach (var c in array)
                    Console.WriteLine(c);
                Console.WriteLine("\n");
                        //List<string> list = new List<string>();
                        //Random r = new Random();
                        break;
                    case 3:
                        string guesses, bokstäver;
                        Console.Write("\n Hur många fel får man ha? ");
                        guesses = (Console.ReadLine());
                        Console.WriteLine(" Utmärkt, då spelar vi!\n");
                        Console.WriteLine(" Felgisningar :" + "0/" + guesses);
                        Console.Write(" Gissade bokstavär: \n" );
                        bokstäver = (Console.ReadLine());
                        Console.WriteLine("Aktuel ord");
                        Console.WriteLine("Gissa bokstav : "+bokstäver+" \n");
                        break;
                    case 4:
                        Console.WriteLine("\n  HEJ DÅ! \n");
                        Console.Beep();
                        break;
                    //avbryter while loopen, avslutar spelet

    You can do it like this;
    var text = Console.ReadLine();
    if(array.Contains(text)) // if exists do what ever you want
    Please mark it correct if you find the answer helpful and please start  a new thread if you have another question. Thanks.

  • What you need to know concerning Playbook, Bridge, Q20, Verizon, AT&T and T-Mobile

    I'm on Bold 9900 and Bridge works flawlessly with my Playbook at 4G speed.  Problem is, I am on T-Mobile and the service is very spotty where I live. They sent me the signal boosters but they don't help. I'm thinking on moving back to AT&T or Verizon and getting the Q20 when it comes out, BUT I don't want to lose ability to bridge to my Playbook. I love my playbook!  Any advice - most appreciated?  Thanks so much!   Michaux.
    Mod Edit: Edited post to comply with the Community Guidelines and Terms and Conditions of Use

    Sorry about the Web link, noobie here, I will read rules now

  • What we need to do if we bought an iPhone in US and want to use it in India?

    Product is iPhone 6.
    OS is iOS 8.
    Processor is A8
    Memory is 1 GB
    Storage Capacity is 64 GB
    I had bought an Apple iPhone 6 in US and now I am in India. So, i want to know what should I do to unlock it here for use.

    The only one who can unlock it for you is the original carrier hold the lock in the US

  • What do you do when what you need to open is in adobe flash? Is there an app that can be used in place do adobe?

    I am unable to access anything that is in adobe flasH on my ipad2.  Is there an app or way to access items in adobe?

    Patricia ~ Click here:

  • How do I properly setup pin and gate swap groups on new components​?

    Hi,
    I've looked for some documentation explaining exactly how the pin and gate swap functionality works but I have not been successful.
    I am trying to get pin and gate swapping working correctly on some digital logic components that I have created (side question - why no modern 74 series logic components like LVC?) as well as RPACKS and some connectors.
    Is it a requirement to create a multi-section symbol to enable gate swapping?  I can't seem to get it to work unless the symbol has multiple sections.  It doesn't work by default for the RPACKs included in Multisim.  If it's possible to do gate swapping by putting the pins of each gate in their own gate swap group I would really like to understand what I'm doing wrong.
    In the Component Properties 'Footprint' tab you can define the 'Pin swap group' and 'Gate swap group' settings.  I have not seen any documentation explaining this and frankly, I'm quite confused by it when using existing 74 series parts as examples.  The single section symbols don't have any pin swap or gate swap groups defined and the multisection symbols have only one gate swap group and then put all inputs in one pin swap group and all outputs in another pin swap group.
    I would really appreciate it if someone could point me to documentation that explains how to do this.  The help files are quite poor in my opinion - they seem to only be able to point out the obvious.  The 'Getting Started,' 'Fundamentals,' etc. type guides don't mention this stuff at all.  The 'User Guide/Manual' (both of which appear to be outdated?) do not explain this and frankly don't have very much information about pin and gate swapping at all.
    I'm hoping I'm just missing something obvious.
    On a related note - I'm having some trouble working with some of these multisection components.  When I want to change the footprint or update the component after making a change to the component in the database I can't seem to find a quick way to do this.  It seems that I always have to go through a drawn out process of 'Replacing' each individual symbol section.  Is there a faster way to do this?
    Thanks,
    Kleven

    Hi Pat,
    I'm working with some SAMTEC connectors.  I don't expect you guys to have these built by default in the library - they are somewhat custom.  But just so you can consider it, we are using the TFM and T2M family of connectors and I'm adding them as additional footprints for the standard dual row headers.  I'm having some trouble with the footprint for the TFM screw-down option since it is a very odd footprint, but I'm going to start a seperate thread discussion for that since I really just need to understand how to manipulate Ultiboard to get the desired result and it's really a different discussion.
    As for RPACKs, I'm a little confused about how Multisim currently supports these. The Value tab in the properties dialog only lets you set the resistance.  Why isn't this more like the resistor value tab?  Since the Value tab is modified like a virtual component it's disappointing that it doesn't offer more capability like the other virtual passives.  In my limited experience I've seen the isolated-4 resistor pack used the most, but like I said, that is limited experience.  It would be nice if some surface mount footprints were added to the master database for RPACKs in the future.  4x0402, 4x0603, and 4x0805, concave and convex, seem like pretty common footprints as best I can tell.
    Virtual components work great in a purely physical design because you can easily change the footprint in the 'Value' property tab.  With the provided RPACKs and LEDs you can't do that, so I had to create new components in the User/Corporate database.  Of course, the LED can't be copied so I had to create it from scratch.  But the RPACK could be copied even though it had a modified Value tab, implying it is a virtual component, if I understand correctly.  Maybe these distinctions and limitations are well defined but I found it somewhat confusing that there were several common parts I had to either copy and modify or build from scratch.
    Since I created those parts, we updated to the PowerPro version and though I'm not certain, I think I can change the footprint in the spreadsheet view.  But in the standard version, I didn't see a way to change the footprint without replacing the component.
    Also, it seems like changing the footprint does not behave quite like I would expect.  If I have a database part which has multiple footprints mapped already, I would expect to be able to choose between those footprints already supported by the database part when I try to change the footprint using the Properties->Value tab or the spreadsheet view.  If I need to change to a footprint that currently is not associated with the component in the database, I would expect to have to edit the database part, add the footprint, map the pins, re-save the component, then update the component in the schematic.
    Is my thought process making too many assumptions here?  I understand that I am one person creating one design in one specific way.  So I'm sure I'm missing some usage cases or intended uses of the tool, especially since I haven't taken any training for this software and have tried to teach myself how to use it over the last 9 months.  And I have noticed that even for virtual resistors and capacitors, the footprint selection dialog is the same - a selection from the database and setting up a new pin mapping.
    As for 74 series parts, seeing the LVC family would be very nice.  This is 3.3V-2.5V and seems like the next logical step for lower voltage support.  It would also be nice to see some surface mount footprints with the 74 series parts.  This isn't a big deal though - it didn't take me long to create the parts I needed by copying and editing from the Master database.  And since I'm not using the simulation models, that made it even easier.  Since I haven't looked into the models at all, I don't know if that would have taken longer to convert to the LVC family.
    I've probably rambled enough for now.
    Thanks!
    Kleven

  • Need to open word document from flash projector on Windows and Mac

    Hello,
    I'm creating a flash program that will be put on a dvd. And the dvd should function well on both windows and mac.
    I'm trying to open a word document on click of a button. I used geturl but it works only on windows but on mac it only opens a blank browser.
    This is urgent and would be really grateful if I get any help to resolve this problem
    Thanks,
    Sunira

    I kind of doubt you could get Safari to open MS Office files. Short of actually getting MS Office for the Mac, the most workable option might be to get NeoOffice/J (a Mac-friendly version of OpenOffice from http://www.planamesa.com/neojava/en/index.php. It won't display some Office files 100% correctly (depending on how complex they are) but it can open and save them.

  • Hi all i need some guide over here ^^

    HI,
    i doing BDCbdc for FB60 and i will need to run 1 more BDC before i PARK the doc.
    The first BDC is to set the company code to 1000
    But there is a problem if the company code in FB60 is 1000, then the BDC i run will fail.
    IF the company code in FB60 is 1234 ad i try to set it as 1000, the BDC will run success.
    therefore i think of a way, is there any way that i will able to know what is the company code in FB60 WITHOUT looking at the company code in FB60.
    Is there a method that BDC can validate the company in FB60.
    e.g
    IF (company code in FB60) = 1000.
    perform ........
    else.
    perform .......
    ENDIF.
    Points will be awared
    Thanks,
    guanwei

    hi thanks for reply,
    i know about this but what if the company have many company codes and once the BDC run.
    the BDC have to check now the FB60 is 1000 or 1234 because different company code using different vendor. this is why i need to validate now the FB60 is using 1000 or 1234.
    because there are too many company code, and if i have to set the company code in FB60 manual everytime it will become troublesome.
    In FB60 transaction the system first promt for entering the company code
    this will only happen when never use FB60 before, after you have set it to 1000, next time try to go to FB60 again it will not Promt to enter company code. it will use the last company code you have set.
    that is why i need some guide on how to know what is the company code it using now by not going into FB60 itself.
    Thanks
    guanwei

  • What is needed to network 2 computers using Airport card

    I know I need an airport card in my eMac, but is there any other cards that have to be in the computer? I want to network my eMac with an iMac using a DSL line. The eMac will be downstairs and the iMac will be upstairs. I'm waiting for delivery from Apple of the iMac. It has everything built in that is needed to network but my eMac doesn't. To make my eMac wireless is all I have to buy is an Airport Card and a Wireless Gateway for the iMac which is the computer connected to the DSL modem and Wireless USB adapter with connects to the eMac? What type of Airport Card do I need to buy for my eMac (model #'s etc.) It is the card that inserts above the super drive in the front of the computer. Is there any software that is needed to install Airport?

    I am also doing some configuration changes (we have one Imac and two eMac's)
    but one eMac does not have a airport card and is hardwired (ethernet) to the high speed cable modem then a apple airport. One Imac and the Emac with a airport card work fine, it is a bit tricky finding the correct airport card (or airport extreme card if you have a ATI graphics card (use about the mac/system profiler then click on more to see if you have a graphics card (which affects which airport card you need, there are alot of resellers on the net so you should find what you want.
    If in doubt there is a free program mactracker which provides data on every mac made (available off off versiontracker.com (free site just register) it will guide
    you on the type of card needed. I was quite amazed at the amount of different spec eMac's made in their relativealy short history.
    Macwireless.com does sell eMac cards (for two models) but also antenna type
    or flash drive appearing USB based wireless connectors that may help.
    I found the mactracker program helpful (alot) as alot of web sites provide some vague info and I would hate to se you get stuck with a non returnable card.
    The actual card install does not look hard (its done through the cd rom drive door.
    I am not sure why we did not get a airport card for ours when we bought it.
    Wish I did as it would have saved some $ (maybe) and surf time making sure I find the right one.
    We did have a antenna wireless antenna for a "green" Imac (long gone) and it ran on OS9 but it was finicky when we had the airport base station upstairs
    and the Imac and antenna in the basement (about 50-75 feet)
    Best of luck
    Hope this helps, I am not a expert, the serial number on the cd drawer will
    nail down the model you have and what you need.
    We have been working adding a laser printer and airport express and the two macs with cards work fine but the Emac with no card can not be set up yet. The laser printer will sure save on ink!

Maybe you are looking for