MOVED: whats the use of these Bios Option

This topic has been moved to Intel Core I7 boards.
https://forum-en.msi.com/index.php?topic=129820.0

Quote from: Jack t.N. on 23-August-09, 17:12:12
Actually, there is not that much to explain here. C-States are IDLE- or HALT States that the processor can enter to save power (when it has nothing to do). C3, C6 & C7 are more enhanced power-saving HALT States than C1. When the system enters a certain HALT State, CPU Core Frequency and voltage are usually reduced to save power.
The first option allows you to specify or limit the "deepness" of the HALT State. If you don't want it to enter the C7 HALT State, choose the next lower state as the limit. The second and third option are actually rather self-explanatory.
thanks so if i want the best powersaving in first option i use c7 and then at 2nd and 3rd option i use disable

Similar Messages

Whats the use of these Bios Option

after Flashing the bios of my x58-pro To 8.50 I saw there is some new option in the bios that you can say there is practically no guidance in the manual on what they do.
i'm interested specially in 3 of them which i believe have something with power saving ,I wonder if somebody can tell me what they exactly do.
C State Package limit setting (which have the option of Auto,C1,C3,.....,C7)
C1 Auto Demotion ( Disable,Enable)
C3 Auto Demotion ( Disable,Enable)
thanks

Quote from: Jack t.N. on 23-August-09, 17:12:12
Actually, there is not that much to explain here. C-States are IDLE- or HALT States that the processor can enter to save power (when it has nothing to do). C3, C6 & C7 are more enhanced power-saving HALT States than C1. When the system enters a certain HALT State, CPU Core Frequency and voltage are usually reduced to save power.
The first option allows you to specify or limit the "deepness" of the HALT State. If you don't want it to enter the C7 HALT State, choose the next lower state as the limit. The second and third option are actually rather self-explanatory.
thanks so if i want the best powersaving in first option i use c7 and then at 2nd and 3rd option i use disable

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT GIVE DETAILS

Hi,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡        the match indicator is not set and
¡        the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
                            a.      Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
                            b.      Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
The most important properties which are taken into account when versions are matched are now listed.
When referring to InfoObjects it is important to differentiate between:
§         Characteristics
§         Time characteristics
§         Key figures and
§         Units
Valid for All InfoObjects Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        Texts
·        Description
If texts/descriptions in the delivery version do not yet exist in the active version, they are transferred.
·        Attribute only (flag)
·        Short and long text (description)
·        Time dependency of attributes
·        Transfer routine
Valid for Characteristics
Properties Matched Automatically:
Properties Matched Manually:
·        Compounding
New InfoObjects are included in compounding
·        Referenced characteristic
Reference characteristics are transferred automatically. A warning is issued.
·        Attributes / navigation attributes
New attributes are included.
If an attribute is added by the customer, the settings for this attribute are transferred (for example, F4 sequence).
·        Application components
If the entry for the active version is initial, the delivery version is used.
·        BEx display
·        Characteristic constants
·        Default member
·        Authorizations (flag and field)
·        Selection (CHASEL)
·        InfoObject is document attribute
·        Data type
·        Length
·        Output length
·        Conversion routines
·        Lower case allowed (flag)
·        Contains master data (flag)
·        Master data is authorization relevant (flag)
·        Export DataSource (Flag)
·        F4 query design
·        F4 query runtime
·        Check ODS object
·        Contains text tables (flag)
·        Texts are language-dependent (flag)
·        Short, medium and long texts exist (each with flag)
·        Default currency
·        GIS attribute
·        Hierarchies exist (flag)
Valid for Key Figures
Properties Matched Automatically:
Properties Matched Manually:
·        Type of key figure
·        Fixed unit
·        Fixed currency
·        Aggregation
·        Exception aggregation
Valid for Units
Properties Matched Automatically:
Properties Matched Manually:
·        See the table above (Valid for Characteristics), if these properties are also relevant for the units.
When referring to InfoProviders it is important to differentiate between:
¡        MultiProviders
¡        InfoCubes
¡        ODS Objects and
¡        InfoObjects
InfoObjects are discussed above (see the first table Valid for All Objects Named Above).
Valid for All InfoProviders Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoObjects
If InfoObjects in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for MultiProviders
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoProviders
If InfoProviders in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for InfoCubes
Properties Matched Automatically:
Properties Matched Manually:
·        New dimensions
If dimensions in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
With the InfoObject catalog object type, InfoObjects that are assigned to a catalog in the delivery version are transferred to the active version automatically. Manual matching is not necessary.
With the transfer rule object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional attributes) are added automatically when the match is performed. Manual matching is not necessary.
With the process chain object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional objects in the process chain) are added automatically when the match is performed. Manual matching is not necessary.
·        Active Version Available
In this column, the following display options are available:
¡        : The object is available in an active version. You decide whether you want to retain this version or reinstall the latest version of the object.
¡        Date symbol: The object is already available in an active version. However, the active version belongs to an older Content release. SAP recommends that you install the latest version.
¡        Gray symbol: An activated version of the object is available in the system. However, the object status is inactive. If an object version is activated, this indicates that all metadata for the object can be created successfully. The inactive object status indicates that the processed object is inconsistent and cannot currently be used for processing data. Transfer the object again from the SAP delivery version (D version). If this is not enough to change the object status from inactive to active the object has to be postprocessed. You find notes on postprocessing in the activation log.
Postprocessing: An inactive object status may also occur for an InfoObject if changes are made to the structure at field level. Postprocessing the object involves converting the relevant tables in accordance with the activation log.
¡        No indicator: The object is not available in an active version.
7. Make Settings in the Selection List and Install.
Make the required settings in the Install selection list:
Installation Type
Installation Type
Information
Simulate installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in background
The selected objects are installed in the background.
Install and transport
The selected objects are installed immediately and then written to a transport request.
SAP recommends you use the Install in background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete. Make sure that when you install objects in the background that the versions are not matched. It is always the delivery versions that are installed. These are not matched with any available customer versions.
Refer
Business Content (Versions)
http://help.sap.com/saphelp_nw04/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
JituK

What is the use of these filters in atg

Hi Guys,
In my web.xml file i have code like this
<filter>
        <filter-name>PageFilter</filter-name>
        <filter-class>atg.filter.dspjsp.PageFilter</filter-class>
    </filter>
    <filter>
        <filter-name>ForwardFilter</filter-name>
        <filter-class>atg.servlet.ForwardFilter</filter-class>
    </filter>
    <filter>
        <filter-name>ErrorFilter</filter-name>
        <filter-class>atg.servlet.ErrorFilter</filter-class>
    </filter>
    <filter-mapping>
        <filter-name>ErrorFilter</filter-name>
        <url-pattern>/*</url-pattern>
        <dispatcher>ERROR</dispatcher>
    </filter-mapping>
    <filter-mapping>
        <filter-name>ForwardFilter</filter-name>
        <url-pattern>/*</url-pattern>
        <dispatcher>FORWARD</dispatcher>
        <dispatcher>ERROR</dispatcher>
    </filter-mapping>
    <filter-mapping>
        <filter-name>PageFilter</filter-name>
        <url-pattern>/*</url-pattern>
        <dispatcher>REQUEST</dispatcher>
        <dispatcher>ERROR</dispatcher>
        <dispatcher>FORWARD</dispatcher>
    </filter-mapping>
what is the use of these filters what will happend if i remove these filters in web.xml file
please give me clear picture on these 3 filters and how these filters are helpful in our application.

As the name filter suggest, All the request will go though these filters if certian condition is satisfied
In ATG web.xml contains following filter:
<filter>
    <filter-name>PageFilter</filter-name>
    <filter-class>atg.filter.dspjsp.PageFilter</filter-class>
</filter>
<filter-mapping>
    <filter-name>PageFilter</filter-name>
    <url-pattern>*.jsp</url-pattern>
</filter-mapping>
When there is .jsp in url pattern all the request will go through Page Filter.
Filter is java concept.For More details about Filter, Refer http://docs.oracle.com/cd/E19502-01/819-3669/6n5sg7b0b/index.html
In order to process Jsp request, ATG use Page filter. It converts normal HttpRequest/HttpResponse to DynamoHttpRequest/DynamoHttpResponse. Please refer http://docs.oracle.com/cd/E24152_01/Platform.10-1/ATGPlatformProgGuide/html/s0801requesthandlingwithservletpipeli01.html

What is the use of Activate GuiXT option

What is the use of Activate GuiXT option .

GuiXT is a frontend design tool that allows you to taylor SAP standard transactions without modifying the backend ABAP code. It is a part of SAPgui and runs on the client PC, based on script files either on the PC or a network drive.
Functionality of guiXT from the SAP help;
"You can insert default values in fields
You can hide fields and groups of fields
You can move fields
You can add and change texts
You can add input help
You can add new screen elements like checkboxes, pushbuttons, graphics, or documentation
You can customize tables
You can change field labels on a system-wide basis"
Regards,
Nick

Whats the difference between these two queries ? - for tuning purpose

Whats the difference between these two queries ?
I have huge amount of data for each table. its takeing such a long time (>5-6hrs).
here whice one is fast / do we have any other option there apart from listed here....
QUERY 1:
SELECT --<< USING INDEX >>
      field1, field2, field3, sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end)
    FROM
      tab1 inner join tab2 on condition1 inner join tab3 on condition2 inner join tab4 on conditon3
    WHERE
     condition4..10 and
    GROUP BY
      field1, field2,field3
    HAVING
      sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end) <> 0;
QUERY 2:
   SELECT --<< USING INDEX >>
      field1, field2, field3, sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0))
    FROM
      tab1, tab2, tab3, tab4
    WHERE
     condition1 and
     condition2 and
     condition3 and
     condition4..10
    GROUP BY
      field1, field2,field3
    HAVING
      sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0)) <> 0;
[pre]

My feeling here is that simply changing join syntax and case vs decode issues is not going to give any significant improvement in performance, and as Tubby points out, there is not a lot to go on. I think you are going to have to investigate things along the line of parallel query and index vs full table scans as well any number of performance tuning methods before you will see any significant gains. I would start with the Performance Manual as a start and then follow that up with the hard yards of query plans and stats.
Alternatively, you could just set the gofast parameter to TRUE and everything will be all right.
Andre

Why interface property be default final whats the use of that

can anybody explain me
when i declared a variable inside the interface its always public static final.
why its static and final what the use of theat. its set of rule or it has any reason.

Sir,
You do not have much choice:
From the JLS (9.3):
"Every field declaration in the body of an interface is implicitly public, static, and final. It is permitted to redundantly specify any or all of these modifiers for such fields."
Note from this though that you do not have to explicitly declare a field in an interface as public / static / final if you dont want to - if you leave it out the field is implicitly declared with these attributes.
So you could wite:
public interface SirInterface {
public int HeIsActuallyPublicStaticFinal = 1;
}

WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL

WHATS THE USE OF TABLE STRIP CONTROL AND TABLE VIEW CONTROL

Subhash,
You create and distribute a model in BD64. The details of that are stored in this tables.
A model gives you the details of the sender / receiving systems and what are the message types that are getting transferred between these systems.
Regarding the IDOC segments issue, can you explaing how are you triggering the IDOC and which message / idoc type you are dealing with.
Regards,
Ravi
Note :Please mark the helpful answers
Message was edited by: Ravikumar Allampallam

Whats the use of sap queries

whats the use of sap queries

Hi,
http://www.sap-img.com/abap/what-is-sap-queries.htm
http://www.informit.com/articles/article.asp?p=664660&rl=1
def sap query
http://help.sap.com/saphelp_bw21c/helpdata/en/f1/0a5625e09411d2acb90000e829fbfe/content.htm
In HR
You can use SAP Query in HR to report on HR data.
how to create sap query
http://help.sap.com/saphelp_46c/helpdata/EN/d2/cb4145455611d189710000e8322d00/content.htm
for maintain SAP query in HR
http://help.sap.com/saphelp_46c/helpdata/EN/d2/cb42cb455611d189710000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/EN/d2/cb455f455611d189710000e8322d00/content.htm
If you want to create InfoSets for HR, you can use logical databases PNP, PAP, and PCH . The database you must use to create your InfoSet depends on the component in which the data you want to report on is stored.
Creating InfoSets
The maintenance procedure for HR InfoSets differs from the procedure described so far in this section inasmuch as HR data fields are grouped together in infotypes. To set up an InfoSet for the HR application, proceed as follows:
   1. On the initial screen for maintaining InfoSets, enter a name for the InfoSet and choose Create.
   2. On the next screen, enter a name for the InfoSet and select one of the HR logical databases in accordance with your reporting requirements.
Customer infotypes can be created on all HR logical databases. In each individual case, therefore, you must decide which database to select so that you can report on customer infotypes.
This screen enables you to enter an authorization group. All of the queries that are subsequently created using this InfoSet can only be executed by persons who have this authorization group.
   3. Choose .
This takes you to the Infotype Selection for InfoSet screen. You now have the option of creating field groups and assigning fields as required for non-HR InfoSets. Field groups that correspond to infotypes and already contain fields, however, are always created for HR InfoSets. The field groups are displayed in an overview tree in the top right section of the screen.
The infotypes that you included in the InfoSet are displayed in an overview tree on the left of the screen. The infotype fields that are already included in field groups are displayed in a different color, and the field group ID is displayed.
In the standard system, a field group is created automatically for each infotype that you included in the InfoSet (a field group corresponds to an infotype).
In the standard system, each field group contains the infotype-specific fields. To ensure that working with the InfoSet is as easy as possible, you are advised to restrict your use of fields in each field group to those you really require. This means you should remove fields that are not required.
An infotype's fields must only be assigned to the pertinent field group. Make sure this assignment is correct. If the assignment is incorrect, the InfoSet could be rendered unusable.
When an InfoSet is created, the following fields are transferred automatically to the first field group:
Logical database PNP Personnel number
Logical database PAP Applicant number
Logical database PCH Object ID, plan version, and object type
   6. Determine the fields that must be included in the field groups of your InfoSet. If you require further information, see
      Assigning Fields to a Field Group.
If you want, you can change the default sequence of field groups and fields as required using drag & drop.
   7. To save the InfoSet, choose .
   8. To generate the InfoSet, choose .
      On the Change InfoSet (InfoSet name) screen, you can choose Edit ® Change infotype selection to add more infotypes to the InfoSet, or to remove infotypes from the InfoSet. Remember to regenerate the InfoSet afterwards.
      This screen also enables you to update InfoSets if, for example, the system contains new additional fields for specific key values. To do so, choose InfoSet ® Additional functions ® Update additional HR fields.
   9. Go back to the initial screen for InfoSet maintenance.
10. Choose User group assignment.
11. Select a user group, and save your entry.
Please reward points.

Whats the use of doget and dopost

hi
whats the use of doget and dopoast when same work can be done by sevice alone?
Message was edited by:
pooja_k_online

Try looking at the Tomcat implementation of HttpServlet.service() method. I have pasted it below, if you look at the service() method all it does is to check for the method and call the appropriate method. It is not recommended to override the service method. It is a good practice to only override the getXXX() methods.
protected void service(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException
String method = req.getMethod();
if(method.equals("GET"))
long lastModified = getLastModified(req);
if(lastModified == -1L)
doGet(req, resp);
} else
long ifModifiedSince = req.getDateHeader("If-Modified-Since");
if(ifModifiedSince < (lastModified / 1000L) * 1000L)
maybeSetLastModified(resp, lastModified);
doGet(req, resp);
} else
resp.setStatus(304);
} else
if(method.equals("HEAD"))
long lastModified = getLastModified(req);
maybeSetLastModified(resp, lastModified);
doHead(req, resp);
} else
if(method.equals("POST"))
doPost(req, resp);
else
if(method.equals("PUT"))
doPut(req, resp);
else
if(method.equals("DELETE"))
doDelete(req, resp);
else
if(method.equals("OPTIONS"))
doOptions(req, resp);
else
if(method.equals("TRACE"))
doTrace(req, resp);
} else
String errMsg = lStrings.getString("http.method_not_implemented");
Object errArgs[] = new Object[1];
errArgs[0] = method;
errMsg = MessageFormat.format(errMsg, errArgs);
resp.sendError(501, errMsg);
}

What the "use JSP presentation" check box does?

Can someone tell me what the "use JSP presentation" check box does? (can't find any documentation)
When I set "Implementation type" to "BPM Object Interactive Call' if a check "use JSP presentation" instead of "Use BPM Object Presentation" and I enter a JSP name can I cause the process to start a JSP ?

Hello,
The option is intended to use a JSP instead of a form for a BPM Object interactive call. This means that you have to prepare your custom JSP, add a special tag library provided by Fuego and "mark" your html tags deciding which of them will become the attributes for the instance of your BPM Object.
Whitin the page you can also call some methods of your objects.
Finally you can post back the data and automatically update your object in the process. There is no much documentation and it's even quite old. Take a look here: [http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/taglib/index.html]
The JSP will be shown as a normal interactive activity popup window. You can customize it as you like, even adding some client side script.
HTH
G

HT2589 We have purchase 5 apple minis and would like them all on one account. That way we can monitor the use of these units. they will be used strickly for a business application. can I use one account in itunes or must i have multiple.

We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units. They will be used strickly for a business application. Can I use one account in itunes or must i have multiple.

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

Whats the use of 'Maximum Councurrency' in File Receiver adapter?

Hi All,
Whats the use of 'Maximum Councurrency' in File Receiver adapter?
Xier

Hello,
Refer the below thread and check it out my reply . I gave for JDBC adapter, but the concept is same for File/JDBC.
Re: JDBC Adapter - One Connection prior to SP20
Best regards,
raj.

Whats is table type ? whats the use of it in abap?

hi,
i am ahmed abap fresher,
i want to know what is table type and whats the use of it. at what point/situation we utilize this table type.

Hi Ahmed ,
Table is apart of data dictionary.
Table is a sort of container where we store data.
For eg. you want to store customer record in the database.Now you will store that customer record against specific fields of the applicable table.
You can create or see table by means of transaction code se11.
There are 3 typesof tables available in SAP ABAP:
1. Transparent table
2. Pool table
3. Cluster table.
Transparent Table:
A physical table definition in the database for the table definition which is stored in the ABAP Dictionary for transparent tables when the
table is activated. The table definition is translated from the ABAP
Dictionary to a definition of the particular database.
Pooled table:
Pooled tables can be used to store control data (e.g. screen sequences,
program parameters or temporary data). Several pooled tables can be
combined to form a table pool. The table pool corresponds to a physical
table on the database in which all the records of the allocated pooled
tables are stored.
Cluster table:
Cluster tables contain continuous text, for example, documentation.
Several cluster tables can be combined to form a table cluster. Several
logical lines of different tables are combined to form a physical record
in this table type. This permits object-by-object storage or
object-by-object access. In order to combine tables in clusters, at
least parts of the keys must agree. Several cluster tables are stored in
one corresponding table on the database.
See the documetation at:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
Reward if useful ...
Regards ,
Shankar GJ

MOVED: whats the use of these Bios Option

Similar Messages

Maybe you are looking for