MOVED: x79A-gd65 8D Straps not working / overclocking help.
This topic has been moved to Overclockers & Undervolting & Modding Corner.
https://forum-en.msi.com/index.php?topic=157731.0
Quote
new setup for a couple of weeks now and have been tinkering in the bios a little but i just CANNOT get it to boot with anything other than the x1.0 strap
What exactly do you mean by "x1.0" strap? You mean the memory multiplier/ratio?
Quote
just overclocking using the FSB results in failure to boot at (iirc) anything above 105??
This system architecture is not designed for significant changes to the base clock. Overclocking is supposed to be done via the multipliers/ratios only. The behaviour you describe is absolutely normal.
Quote
Intel 3820
MSI X79A-GD65 8D
16GB Mushkin Ridgback Redline 2133
64GB Crucial M4 OS Drive.
500GB Samsung Spinpoint storage drive.
1000W Coolermaster Silent Pro Gold.
Gigabyte (sorry i got it cheap 2nd hand) GTX580.
Running Windows7 home premium 64bit.
What is your current UEFI/BIOS Version?
Similar Messages
-
X79A-gd65 8D Straps not working / overclocking help.
Ok so i have had my new setup for a couple of weeks now and have been tinkering in the bios a little but i just CANNOT get it to boot with anything other than the x1.0 strap. Setting 1.25 or 1.67 just results in 3x reboot loop eventually booting with the default settings.
What am i doing wrong?
I have never overclocked using the UEFI bios before so its all a bit new to me.
I understand changing the strap overclocks the memory too so i set that to minimum (800MHz) and the cpu multiplier to minimum (12) and left the FSB set to 100. Everything other than the memory voltage ((1.6v) and cpu core voltage (1.375) which are my mulitpier overclocked settings) was set to auto.
No joy it still wouldn't boot.?
At stock cpu multiplier (37) just overclocking using the FSB results in failure to boot at (iirc) anything above 105??
Leaving the FSB alone and overclocking just using the multiplier i can max it out at 45 (4.5GHz) so i should, i assumed, be able to increase the strap and lower the multi to 35 to give me the same speed of 4500MHz and boot to allow me to try to go for a higher speed, but no joy.
What am i missing? I assume there must be another setting that needs changing to allow me to use the straps but i have no idea what.
Any pointers would be greatfully received.
Full system specs as follows
Intel 3820
MSI X79A-GD65 8D
16GB Mushkin Ridgback Redline 2133
64GB Crucial M4 OS Drive.
500GB Samsung Spinpoint storage drive.
1000W Coolermaster Silent Pro Gold.
Gigabyte (sorry i got it cheap 2nd hand) GTX580.
Running Windows7 home premium 64bit.Quote
new setup for a couple of weeks now and have been tinkering in the bios a little but i just CANNOT get it to boot with anything other than the x1.0 strap
What exactly do you mean by "x1.0" strap? You mean the memory multiplier/ratio?
Quote
just overclocking using the FSB results in failure to boot at (iirc) anything above 105??
This system architecture is not designed for significant changes to the base clock. Overclocking is supposed to be done via the multipliers/ratios only. The behaviour you describe is absolutely normal.
Quote
Intel 3820
MSI X79A-GD65 8D
16GB Mushkin Ridgback Redline 2133
64GB Crucial M4 OS Drive.
500GB Samsung Spinpoint storage drive.
1000W Coolermaster Silent Pro Gold.
Gigabyte (sorry i got it cheap 2nd hand) GTX580.
Running Windows7 home premium 64bit.
What is your current UEFI/BIOS Version? -
All share functions except email are NOT enabled. I can create and print but order prints is also not working. HELP!
Hello
Please see notes and 4 attachments for your reference. Hopefully this information helps.
Maureen
what version of iPhoto are you using? 9.5.1
what system version are you running? OSX 10.9.4
what happens when you try to order? See attached picture. I want to share pics to FB & FLICKR etc
did you make sure you've selected the correct Print Products store in iPhoto's Advanced preference pane? YES
what fixes have you tried? Restarted computer. I'm not very computer savy. I have had no problems with this in the past.
where is your library located? I have not moved anything for iphoto.
did you apply any updates or upgrades just prior to the problem occurring? I can't remember
are you running a "managed" or "referenced" library? Not sure how to find this out
what type of Mac? iMac 2.5 GHz Intel Core i5
how much free space on your boot drive? 12 GB 1333 MHz DDR3 - I have an external hard drive 1 TB -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp -
i phones updated iso 8.01 all three phones will not connect to service provider and touch id
will not work APPLE HELP !!!!!!!!!
anyone know i fix as i have spent over 2000 pound on three phones that won't work
all three where working fine until the 8.01 updateApple just pulled the update because it is a major fubar! You will have to rollback your iPhone to the base iOS 8 using iTunes and Apple needs to seriously test its patches!
Update:
Simply connect your phone to iTunes and back up your data. Then, click the “Restore iPhone” button and follow the on-screen instructions. It’s a huge pain, but at least it’s better than having your shiny new iPhone turned into a big expensive iPod touch. -
My ipod touch has been disabled for 212,456,875 minutes! I have followed all instructions on the apple support site to restore it but this has not worked. Help!
Without know exactly what you did or what happened:
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?
Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh -
I have deployed one application containing youtube video but it is not working pls help
I have deployed one application containing youtube video but it is not working pls help Application is build using struts2 and is deployed in oracle cloud, login page works fine but the success page is not displayed please help
Hello,
A wild guess, given the lack of details:
I wonder whether it would violate the http://en.wikipedia.org/wiki/Same-origin_policy ?
This is part of the security infrastructure.
"Stealing" content to insert it anywhere else might also violate copyrights?
Technically, does it at least work "on premises" onto WLS 10.3.6?
Regards
Patrick. -
How can I remove the 6.1 upadte so I can receive text messages again? I've tried deactivating Icloud; setting up a new account not shared w/ anyone or any other devices and it's still not working. HELP!!
my money is on a hardware issue
-
I just got a new laptop and itunes is not working I have tryed to reinstall it and do alomst everything and it's still not working. Help?
What do you mean "not working"? That could mean multiple different things.
If help is desired, be as specific as possible.
Maybe you are looking for
-
New Mac mini and a Samsung moniter
My new mac mini will not work with my Samsung BX2335 LED monitor. Any suggestions?
-
Capturing in the HDV-Apple ProRes 422 Preset
I am trying to capture some HDV footage in Final Cut 7 using the HDV-Apple ProRes 422 preset. However, when I go to log and capture after changing the audio/visual settings, the program immediately asks me to enter a file name and then jumps right in
-
Query Designer - Structure - Sub-totals display
Hi I am currently creating a structure with different levels and I woul like to have the subtotal I calculate in the various formulas in the structure below the data and not above like it is now. For example now : lvl1Total Net Sales ***lvl2Gross Sal
-
Help! Magic iDVD slideshow controls instantly vanish
I'm working with Magic iDVD & trying to figure out how one actually controls the: 1. slideshow volume 2. slideshow duration's 3. and also how one would adjust the transition type (page flip, droplet, etc.) I actually see how to do this BUT the adjust
-
Discrete Job Component Pick Release (SRS)
Hi All , For Push - Supply type , we can issue items to the job manually . Could any one brief purpose of Discrete Job Component Pick Release (SRS) in WIP Thanks Kiran