Moved XServe -- Can't access Yikes!

I had a small business and had the Xserve on a fixed IP. I shut down the business and stored the Xserve for several months. Now I want to access the server. I have Apple Remote Desktop which I used to access the Xserve without a video card/monitor. I hooked it into a switch and cannot access it from my laptop as I had before. I am a novice on the Xserve. Is the fact that the Xserve was set to a specific fixed IP now being recognized by my Remote Desktop? I have tried many things without luck. I'm not sure what version on OSX its running...its about a year old or so. Can someone please help me get it back and running again. It's a shame to see it just sitting there. Thank you for responding.
Xserve Mac OS X (10.3) XServe & Power Mac G4

Thank you!
I thought it was a special video card needed, and had it headless using Apple Remote Desktop. Several times in the past I've tried to access it with no luck. It sat for months. You suggested:
My suggestion would be to find a video card for the
thing, hook up a monitor and keyboard and start all
over again with the OSX Server install disks.
Still thinking it was a special video card, I googled and went to an article, "Poor Man's Video Substitute" on AFP548.com. It suggested using a video card from a PowerMac G4, which I have, and used and was able to access the Xserve and clean it up so I can Ebay it. And it was only used for a month or so. Thanks for the lead.

Similar Messages

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant. The files show up on the new MacBook but cannot be opened. Thanks!

How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!

Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

HT1495 My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to d

My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to do this?

You are more likely to get relavant and useful suggestions posting to the Mac forums instead of the iTunes for Windows forum where you've posted.

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

My mac seems to be frozen on an internet page. I cant force quit. I can't control+options+command+esc. I can't access my activity monitor. I can see my mouse moving but when I click on anything, it doesn't seem to engage or recognize it. Fix?

My mac seems to be frozen on an internet page. I can't force quit. I can't control+options+command+esc. I can't access my activity monitor. I CAN see my mouse moving but when I click on anything, it doesn't seem to engage or recognize it. Fix?

Thank you. There is a bigger issue. It is not the web page that is the problem. It is that I can see my mouse moving and can move it along the bottom toolbar and the options will highlight but I can't click on anything. I can see the apple icon to get to force quit but cant click on it.
I used your suggestion and force quit came up but I can't select the option to force quit... not even with my arrows and enter/return key. Any other thoughts?
Thank you.

I mistakenly moved my apple keyboard layout bundle to the trash can and now I am unable to log onto my computer. I can't type anything so I can't access my account to get back onto my computer.

I mistakenly moved my apple keyboard layout bundle to the trash can and now I am unable to log onto my computer. I can't type anything so I can't access my account to get back onto my computer.

restart and hold Command+r to enter in recovery mode and ill allow you to repair your OS X installation. If you cannot repair it, then just create a new user, as usually issues with keyboards are rooted in the user's account.
Good luck

After recently moving my keyboard broke,I've now replaced this but have now forgotten my password so can't access anything on my computer,anyone know how I can get through this?It dosent give me the option of forgotten password!

After recently moving I broke my keyboard,this has now been replaced but I've forgotten my password so can't access anything on the computer.anyone know what I can do?It dosent give me the option of forgotten password!

I'm totally confused, since keyboard and password are mutually exclusive items. In other words, use what you used with the broken keyboard.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

I moved my iTunes content to an external drive a few months ago; now I can't access it with other iWork/iLife applications. Help please :)

Between my external drive and my internal drive I have 3 Library.xml and Library.itl files. (There was a situation where I had to rebuild for some reason)
Should the "Library" files reside on my internal drive or external drive? In my ~/users/username/Music/iTunes/ directory? If so, can I delete all current versions of the Library files and just rebuild by holding down the shift key when starting iTunes and choosing an option? Which one? Would they end up in the correct directory? Sorry if this seems confusing but everything works fine with my iTunes EXCEPT I can't access iTunes in other iLife/iWork programs.
I should mention I have the same problem with iPhoto (on external drive; not populating in iLife/iWork, but works fine by itself) I know, not the right discussion, just thought I'd mention it.

If the iTunes Library.itl file is also on the external drive, try launching iTunes while holding down the Shift key, and when the dialog window opens that allows you to create a new library or open an existing one, choose to open an existing one, navigate to the folder that contains that library file and select it.
If that works, note for the future that if you launch iTunes when that external drive isn't mounted, iTunes will default back to the normal location on the internal drive and you'll have to repeat the Shift-launch process.
Hope this helps.

Backups on the disk, but can't access via Time Machine

Time Machine runs without announcing any errors. Browsing the Time Machine drive in Finder, I can see that TM is actually making the backups. But when I enter Time Machine, I can't access any of the backups.
This began under Snow Leopard, but not immediately upon installation. The more immediate change was when I added a new drive to serve as the Time Machine drive. From looking at the disk in Finder, it looks like the backups are all there, back to the date I plugged in the new drive (Sept 7).
Can anyone tell me why this happened? I recognize I could reformat the drive and start over to see if things start working again, but is there any way to kickstart things and preserve the existing backups?

Pondini wrote:
chicagopjp wrote:
But when I enter Time Machine, I can't access any of the backups.
What, exactly, do you see? Do you see a Finder window, labelled +Today (Now)+ ? Is there a "cascade" of Finder windows behind it, but just dark shadows, and you can't click on them? Do you see the background full of stars, and are they moving?
Yes to all of the above; exactly.
There are some things that can cause problems with the "Star Wars" display itself.
One is, it doesn't have separate preferences, so it uses the Finder's instead. If you're using Pathfinder or another Finder substitute, turn the Finder back on.
I just use Finder.
If the Finder's preference file is corrupt, it can cause problems. Delete the file
*<your home folder>/Library/Preferences/com.apple.Finder.plist* and try again.
Done --- no change.
Try the things in item #E4 of the Time Machine - Troubleshooting *User Tip.*
Done -- no change.
I do appreciate your help. Any other suggestions?

Can not access the media card files Blackberry 8310 - HELP

Can not access the media card files Blackberry 8310.
I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
Here are the messages:
“A media card has been inserted that contains encrypted content which will be unaccessible by this device”
I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
Media card support – ON
Encryption Mode: - Security Password & Device
Encrypt Media Files – YES
Mass Storage Mode Support – OFF
Please note – I can not change the encryption mode since it is set by policy
Security Options – General Settings – Content Protection – Disabled
The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
Unable to display file /media card/ pictures/ing000000xx.jpg.rem
Here is what I have tried (from the advice on this board):
1)     Read the files directly off the media card – No good
2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
3)     Email the file then read it – No good
4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
Thanks for any help you can offer!

Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

I can access my time capsule from my mac mini at work but my macbook can only access it from my home network. how do i fix this?

I have a Mac Mini and a MacBook, both were configured at home to access the time capsule. I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home. The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow. Accessing the same files from an older HP laptop is as fast as accessing its own hard drive. How can I speed up the accessing of these files from my apple products. One would think they would work fast and the 'windows' computers would take minutes to map the drive each time...
Thanks for any help.

I have since moved the mini to work to use there and it has no issues looking up files on the time capsule which remains at home.
This cannot happen by magic though.. you must have configured the mini to access the TC remotely.. which method are you using, BTMM and iCloud??
The macbook whoever can only access the time capsule from within the home network. I can't seem to find what I may have done differently. Can anybody help?
How is the Macbook configured to access the TC remotely?? If you are trying to use BTMM and iCloud, then it might be a case that with the mini running the connection cannot be done by more than one computer at a time.. this is generally the case although I do not know if that is specifically true of BTMM method. Try turning off the mini and leave it off.. (off not standby)... then reboot the TC when you are at home.. and then try and connect the laptop to the TC the next morning from work. See if it is then able to capture the connection.. if so start up the mini and I suspect it now will not be able to connect.. that will prove that the TC cannot cope with two remote connections.
There also could be another factor in here. If you are accessing the laptop via the same router as the mini is on.. then actually you cannot have two users mount the same files on a TC.. from the same IP address.. as far as the TC is concerned both devices have identical IP, that is the public IP of the work location router.
If you happen to not be using BTMM then the situation is even easier.. you cannot make two different devices connect to the same network resource using the same port. That is the failing of the NAT system.. one device uses the port then it cannot be used by a second device. You will need to do some fancy footwork and use a different port.
Anyhow tell us exactly how you are doing remote access.. otherwise I am just guessing.
Not sure if your allowed to post two questions, but it's may be related. I find that accessing the files on the time capsule from the mac mini or the macbook is very slow.
Are you talking about files you are hosting on the TC?? Not Time Machine backups??
Can you tell me exactly how you are accessing the TC.. please do a test..
Copy a file to the TC and from the TC using the Laptop.. Use a single very large file, eg 1GB movie file.
Give me a read and write speed.. you can use activity monitor to give me an aprox average speed as well as peak.
Do the same test from the same computer with wireless turned off running ethernet.
Then do the tests from the mini.. same ones.. copy large file to and from the TC by ethernet and by wireless.. when using ethernet make sure wireless is off.
I strongly recommend you set IPv6 to link local only for your wireless and ethernet setup in the Mac.
eg
Now do the test from the HP laptop and give me the results from that.
Is the issue wireless only.. ??
Then you might need to spend a bit of time fixing the wireless in the Macs.. you can run wireless diagnostics in Mavericks.
About Wireless Diagnostics

How can i access my old correspondense with old password in Mozilla Thunderbird? How can i check out from my password?

I had my website moved to other hosting. Accordingly, i changed a password, and when i checked in on my computer the first time with a new password, i stupidly checked the box "remember me on this computer", but i lost access to all my old emails that were laying in Thunderbird on my PC. How can i check out from the current password and log in with the old one so that i could access my old correspondense?

'''Pop mail accounts '''can only access the server Inbox.
Messages are downloaded to your computer and stored in the Thunderbird Profile mail account.
Usually, the copy on the server is removed unless you select to 'leave messages on server' in Account Settings..
'Tools' > 'Account Settings' > 'Server Settings' for pop mail account.
These emails are stored on your computer and can be accessed in both 'online' and 'offline' mode.
You would need to make sure you periodically create a backup of these emails.
'''IMAP mail accounts '''see a remote view of any subscribed folder on the server.
Subscribed folders download headers only and when you select to read an email, it is retrieved from the server and stored in a temporary cache to faciltate quick access to reading.
These emails are not stored in your Thunderbird profile folders on your computer, so would not be visible if you changed to 'offline' mode. They are stored on the server.
If you did not synchronise those subscribed folders then a copy was never stored in your Thunderbird profile imap mail account.
As you have modified the IMAP mail account and it is currently accessing the new hosting server, so cannot display anything on a different server, I would leave it alone because it is working just fine.
What you could try is to create a new IMAP mail account with server settings to the old host server using the old password.
File > New > exisitng mail account
Enter name, email address and password
click on 'Continue'
If you do manage to get access, then synchronise the subscribed folders to get a copy downloaded to Thunderbird Profile folders. As those folders are constantly updating to match the server, once you have the emails downloaded, go into 'offline' mode and move them into 'Local Folders'; you will need to make new folders in Local Folders account for those emails.
However, it is possible that you may not get access as that contract has ended. There is no obligation for the old host company to keep your emails if you do not have an account with them. In which case those emails will be lost.
After creating new imap mail account, if you get access do as advised to get emails into Local Folders, once emails are in Local folders you can remove/delete the imap mail account. If it does not work, you can delete the imap mail account.
Information on synchronising subscribed folders:
* https://support.mozilla.org/en-US/kb/imap-synchronization
Information on backup:
* http://kb.mozillazine.org/Profile_backup
* http://kb.mozillazine.org/IMAP_backup

How can I access my iCloud account from my computer, when I'm running OSX Leopard?

I have a Mac Book running Leopard and I don't have the iCloud icon in my settings.. How can I access my iCloud account/back up my computer to the cloud?

Your signature says you have 10.6.8 which is Snow Leopard, but that is still not compatible with iCloud. You cannot back up your computer to iCloud in any case - it doesn't provide for that, only for iOS backups.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
If you have already set up an iCloud account on another Mac or device you can make limited use of it with Snow Leopard - details here.
To make full use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
(If in fact you are running Leopard and it is an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.)

Can I access Terminal from Single User Mode?

So I have an early 2011 MBP that is having the graphics switiching problem that's been well documented in some other threads recently:
https://discussions.apple.com/thread/4766577?start=120&tstart=0
http://appleinsider.com/articles/13/10/14/apples-2011-macbook-pro-lineup-sufferi ng-from-sporadic-gpu-failures
Basically, I cannot boot because it goes to a white screen after the apple logo.
I found these terminal commands that will shut off the discrete graphics card so that only the integrated graphics will run, which would be an ok solution because I mainly use the computer for Recording/Mixing etc with Logic Pro, so I don't really need the more powerful graphics.
http://forums.appleinsider.com/t/160161/apples-2011-macbook-pro-lineup-suffering -from-sporadic-gpu-failures/80#post_2420378
But I of course can't access Terminal because I can't get past startup. Is there a way to get to terminal and/or enter these commands while in Single User Mode?

Are you referring to these
You can move the kext out with these commands:
> mkdir DisabledExtensions
> cd /System/Library/Extensions
> sudo mv ATIRadeonX****.kext ~/DisabledExtensions (replace asterisks with your model's numbers)
> sudo touch /System/Library/Extensions
If so there is nothing to take, the commands are physically removing system files. Once those files are moved there is no way for them to go back unless you put them back or you do an install of the OS.
But I am surprised that Safe mode does not work for you. In Safe mode the system only uses the onboard graphics. Are you certain you ere booted into Safe mode? When in Safe mode the words Safe Boot will appear in red letters at the top of the login screen. Did you see that? I ask because it is easy to mistime the Shift key press during boot and not actually get into Safe mode.
Perhaps you problem something different?

Can't access my mp3s from my external drive. help please!

Hey,
So I've read most of the articles in Support but can't find an answer. I read this too : http://support.apple.com/kb/HT1449.
I'm running itunes 10.5.3 on my imac. I transferred my itunes music folder to an external drive because it was taking up too much space on my internal drive. Then I went into itunes preferences and changed the location of the folder to the external drive.
But I can't access tons of my mp3s now. When I click on a song in my library that it can't access, I get that explanation mark, and a statement asking me if I would like to locate the file. I locate it, and then I can listen to it.
And after I find that missing file for itunes, a window pops up and asks "Would you like itunes to use the location of "-----" to find other missing files in your library"? I select 'yes'. But then itunes can't find the missing files, even if they're in the same exact folder as the last one I found! It seems to me like this function is broken? And I have like 2,000 missing files! I even re-imported my itunes music folder back into my library. But that didn't work and now I have a ton of duplicates.
Any suggestions?
J

I read this too : http://support.apple.com/kb/HT1449.
I'm running itunes 10.5.3 on my imac. I transferred my itunes music folder to an external drive because it was taking up too much space on my internal drive. Then I went into itunes preferences and changed the location of the folder to the external drive.
That's where you went wrong.
iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
do not confuse moving your whole folder and library with moving just media files as in
iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option key held down and guide it to the new location of the library.

Moved XServe -- Can't access Yikes!

Similar Messages

Maybe you are looking for