MOVED: Z97 Gaming 5 - SATA not present??

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=251803.0

The thing is: cheap PSU that you've used in old build is most likely not support Haswell (Refresh) so that might be causing different issues too. And personally: yes I will defend it til the death. Cheap PSU can kill anything instantly, and the fact it works with old system... well. It's OLD system and so is PSU.
Also you're mixing RAM. This motherboard will work perfectly with either 1, 2 or 4 RAM sticks, never 3.
I think you should speak to the reseller OR MSI, since you think that motherboard killed all the drives (I wonder how... mobo is connected to them only through SATA cables which deliver NO power to them)..
>>How to contact MSI.<<

Similar Messages

  • Z97 Gaming 5 - SATA not present??

    Well so far I've had no luck with this motherboard. Tried every single SATA port and it simply won't recognize that my SSD and HDD are installed. Even tried switching from AHCI to IDE, still nothing. Any thoughts? It's a brand new SSD that hasn't even been used yet, states that it's "not present". Cheers.

    The thing is: cheap PSU that you've used in old build is most likely not support Haswell (Refresh) so that might be causing different issues too. And personally: yes I will defend it til the death. Cheap PSU can kill anything instantly, and the fact it works with old system... well. It's OLD system and so is PSU.
    Also you're mixing RAM. This motherboard will work perfectly with either 1, 2 or 4 RAM sticks, never 3.
    I think you should speak to the reseller OR MSI, since you think that motherboard killed all the drives (I wonder how... mobo is connected to them only through SATA cables which deliver NO power to them)..
    >>How to contact MSI.<<

  • MOVED: Z97 Gaming 7 - bios 1.6 , random SATA drives disappearing

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=183874.0

    Quote from: pandaz on 07-October-14, 16:57:17
    To Kuba..
    1. Could you state clearly what is the original boot sequence of your HDD shown in the bios?
    you mentioned that after you reset from Windows or from DOS then the sequence will changed??   how often will this symptoms happened.
    2. If you only use the Intel SSD 520 + the Normal HDD (remove DVD and the Samsung SSD) , will you see the boot sequence lost issue?
    3. What do you mean by the below??  you can't flash bios 1.5 in DOS mode???  please help explain in details
    BIOS 1.5 from the support site (no matter eu or global) won't run on Windows 8.1. the file downloaded by msi live update runs normally. Can somebody help and share BIOS 1.5 installer?
    Regards
    Orginal boot sequence:
    1: SSD Intel 520 (system)
    2: SSD Samsung 840
    3: HDD
    Mobo was traing to set Samsung at first place, but after disconnecting this drive, it put HDD on fist place. So i disconnected all other drives, and mobo shows only question marks in Intel SSD field.
    I never had any problems with this intel SSD, it works perfect, samsung behaves the same way, it disappears randomly.
    Sometimes all works correct, some times some drive is missing, it does not matter the restart is made on windows, dos, or on bios. Totally random.
    When i switch to second bios (1.3) all works fine, only on 1.6 freaking out.
    When i what start bios package from msi-support site windows shows "this app. can't be run on this system", thats all (there are 3 files i archive). File downloaded by msi-update starts normally (and this is only one exe file), unzip and run dos-mode update.  Unfortunately, I removed the file with 1.5 downloaded by msi live update.
    Maybe the bios package is dedicated to installing from usb-drive through m-flash ?
    And on the windows can update only through msi-live update? I really do not know, I'm confused.

  • MOVED: Z97 Gaming 5 - Updated drivers with MSI live update, crashed - nothing works

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=255291.0

    sounds like along with drivers, you also flashed your BIOS and this failed and caused this issue
    Quote
    I tried to put the MSI Z97 BIOS on a flash drive and reboot with that, but nothing happens. There are no beeps, just the harddrives booting up and then nothing more..
    place your old BIOS version on the USB key not renamed and place the USB key in rear USB ports
    then see if BIOS can be recovered
    else you have to RMA it as there is no dual BIOS solution on it

  • MSI Z97 Gaming 7 not booting up

    Hi guys,
    I have just purchased new motherboard & new intel core i7 4790K. I've installed everything & when I tried to boot up the system it stuck to 72 error code during post checks in manual which states as "Late South Bridge Initalization" Please help guys as I m not able to boot up the system.. My configuration is as follows:
    Intel core i7 4790k
    MSI Z97 Gaming 7 MoBo
    Corsair XMS 3 4Gb RAM
    Corsair H100i CPU cooler
    Corsair CS750M PSU
    NZXT Source 530 cabinet
    Please help guys ....

    Hi
    What you can do is either:
    -Return the board (RMA)
    -Try to straighten it yourself using needle, magnifying glass and bright light
    -Ask local jeweler if they can straighten it up for you.

  • Z97 Gaming 7 Not Reading CPU Temps

    I have had the Z97 Gaming 7 installed since July/2014 and had no issues. Today when I booted up I noticed that the debug LED was not displaying the CPU temp just "00". In the bios it also does not display the CPU temp but the system temp is displayed. In AIDA64 the CPU temp is stuck at 40c but it shows all the single core temps correctly.
    I have removed the boards battery, cleared the CMOS and updated the BIOS to 1.80. Still showing "00" when booted up and no CPU temps in the BIOS. Can't understand whats going on here, could it be a dead sensor on the board? Some help would be appreciated.
    System Specs:
    Windows 8.1 64
    Samsung 840 Evo 1TB
    i7 4790K
    MSI Z97 Gaming 7
    Corsair Vengeance 1866 16MB
    PowerColor PCS+ R9 290
    Creative SB X-Fi Titanium HD
    NZXT Kraken X61
    Running all current drivers
     

    Thanks Nichrome. Unfortunately here where I live, that is not an easy thing to do as there are not to many IT places i would trust to have this done. I guess I'll have to look around to see if I can borrow a Z97 board or a Haswell Processor to rule out with component needs to be RMA'd.
    If any one else can add any more insight I would be grateful.

  • MOVED: Z97 Gaming 7 won't post. debug LEDs at 41-43. MSI LED is off.

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=256760.0

    I'm using a Corsair CS650m.
    I've noticed the CPU support issue after I encountered my problem and was surprised to see this, my understanding that the gaming boards did support the new Haswells, at least with a recent BIOS. In fact, there are some references online to BIOS update issues for this CPU.
    Let me ask a crazy question: Is it possible that I've somehow POSTed correctly and what I'm seeing now is the CPU term? I'm wondering because the numbers (42-44) fluctuate a bit.  I know that POST and POST2 can be used for CPU temp, but I'm not sure how one distinguishes between that and a debug code.

  • MOVED: Z97 Gaming 7 isn't booting under BIOS A

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=256341.0

    to what bios version live update update it?
    have you done >>Clear CMOS Guide<< with power cord removed?
    can you list full system specs see >>Posting Guide<<
    about bios recovery, boot with working bios, and go to bios setup, then select m-flash, switch your bios chips
    and proceed with recovery

  • MOVED: Z97 Gaming 7 keyboard freezes at BIOs

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=184251.0

    Try to remove OC with >>Clear CMOS Guide<< and see if it works fine then

  • MOVED: Z97 Gaming 5 boot loop

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=254983.0

    Hi
    Try single RAM stick
    Also try to boot when motherboard is on non conductive surface like wooden table or motherboard box
    Try clearing CMOS with power cord removed >>Clear CMOS Guide<<
    Maybe battery replacement will help
    If above fails, disconnect everything, remove CPU and inspect CPU socket with magnifying glass and bright light.
    Edit: with single RAM stick, make sure to test each RAM stick at the time, each time in different slot.

  • MOVED: z97 gaming 7 motherboard

    This topic has been moved to MSI Intel boards.
    https://forum-en.msi.com/index.php?topic=250756.0

    For back panel audio ports, you can connect Direct Audio Power and turn on the AUD_SW1 switch to get better audio quality 
    and the back panel audio jack
    the top(or left) three are mic / Line-out / Line-in, if you plug in your headphone realtek manager will also show the the function of which port you plug in...

  • MOVED: Z97 Gaming 3 Overclocking

    This topic has been moved to Overclocking, Undervolting.
    https://forum-en.msi.com/index.php?topic=256088.0

    Quote from: Marksussman1974 on 31-May-15, 01:25:40
    I'm just curious, did you update your mobo bios to latest release? Also, what speed do you usually keep your cpu at?
    I have updated my BIOS to latest version only because I though I had BIOS problem -> https://forum-en.msi.com/index.php?topic=252562.msg1451633#msg1451633
    Turned out it wasn't, but no one replied at the time.
    I keep ,y CPU as high as temperatures allows,. I run 3 Prime95 threads 24/7 + 1 more at night time, and I prefer CPU package temps to be at low 60s.
    Currently @ 4HGz 1.16v under load (tad above default 1.15v)

  • MOVED: z97 gaming 9 + 4790k 5.0ghz QQQ???

    This topic has been moved to Overclocking, Undervolting.
    https://forum-en.msi.com/index.php?topic=181813.0

    ok just wanted to update , well had to reload everything, it lost half the registry and changed everything to .lnk extensions, so im pretty sure the bsod  was caused my issues because I didn't reload the OS fresh, and the bios was using a 1.0 flash , now since reload everything is all happy, im currently running a 4.7 Oc with 1.31 v on the cpu, 1.6v on the ram and 1.91 on vccin, and so far its stable and holding, so lesson learned "reload os when adding new mb and cpu" and make sure the bios is up to date.  after everthing is reinstalled I may try a 5.0 OC cause I kinda made that y goal currently I think its entirely possible considering its dl,ng multiple filesgames and checking my raid 5 volume, and the temp is37-41c so so far so good, if anyone wants to throw so suggestions feel free but so far I am thinking 4.7 is the magic number hmmm

  • MOVED: Z97 Gaming 5 Cashback

    This topic has been moved to Anything Under The Sun.
    https://forum-en.msi.com/index.php?topic=181185.0

    Contact MSI directly to have a ask about it, >>How to contact MSI.<<

  • MOVED: Z97 GAMING 5 Review Part 1- Introduction

    This topic has been moved to User Reviews & Modding.
    https://forum-en.msi.com/index.php?topic=181731.0

    Isn't it a 4 true phase pwm doubled to 8? Controller is also analog i guess.
    What are those mosfets btw?
    And also anyone know that the ratings of those dark caps? 2k, 5k or 10k?

Maybe you are looking for

  • Premiere clip to Premiere 2014.2 problem

    I have encountered a problem when trying to open a premiere clip xml in premiere pro (2014.2). This happens with both new and old projects I get an error "The project could not be loaded, it may be damaged or contain outdated elements". It refers to

  • Open Data Set Encoding

    Hello all, Can we specify Encoding in the OPEN DATA SET statement,i found out that we can encode it with UTF-8. but i want to encode my data in Latin1 ISO-8859-1. is it possible? if yes how to do it? plz help its urgent:(

  • Asset Depreciation calculation BADI implementation

    Hi Experts, We have a specific requirement for calculation of rapid depreciation in assets. When a change process(termination) is run in CRM side it creates an asset on ECC which has to be depreciated rapidly. We have to cumulate the values of billpl

  • .exe version issues HELP

    I've just finished projects with a bit of animation and some branching that I facilitated with additional buttons and duplication. Published for the web it works perfectly. My instructor (I am a student with a co op in elearning) has asked for an .ex

  • ALV object in function module shows old data

    Hello, I create a function module with import parameter matnr. This function module calls a screen that displays an ALV with the whole info of matnr out of table mara. I include this in a program where a material can be selected. This is then input f