MOVED: Z97 Gaming 7 won't post. debug LEDs at 41-43. MSI LED is off.

This topic has been moved to GAMING Motherboards.
https://forum-en.msi.com/index.php?topic=256760.0

I'm using a Corsair CS650m.
I've noticed the CPU support issue after I encountered my problem and was surprised to see this, my understanding that the gaming boards did support the new Haswells, at least with a recent BIOS. In fact, there are some references online to BIOS update issues for this CPU.
Let me ask a crazy question: Is it possible that I've somehow POSTed correctly and what I'm seeing now is the CPU term? I'm wondering because the numbers (42-44) fluctuate a bit.  I know that POST and POST2 can be used for CPU temp, but I'm not sure how one distinguishes between that and a debug code.

Similar Messages

  • Z97 Gaming 7 won't post. debug LEDs at 41-43. MSI LED is off.

    Hi everyone,
    Doing my first build in quite a few years so somewhat of a Noob. I'm using an MSI Gaming 7 and an Intel 4970k. I'm using 2x4GB Crucial 1833 SDRAM.
    After hooking CPU and MB, and cooler (Evo 212) I decided to see if things boot before installing a dedicated GPU, drives, etc.
    Unfortunately, I don't get to boot, and instead I get stuck in an early post: I go past 99->33-> then I eventually get stuck around 41-43 with the numbers occasionally shifting back. According to the manual, this is "early memory initialization error". I've tried using a single RAM in each of the slot, and then also tried the other one instead. No luck, always the same point.
    Not sure what to do at this point, and whether there's a way to check if the MB or the CPU or both are hosed.
    Also, I'm wondering why the MSI LED is not on. Should it be on up to the boot? What is its purpose?

    I'm using a Corsair CS650m.
    I've noticed the CPU support issue after I encountered my problem and was surprised to see this, my understanding that the gaming boards did support the new Haswells, at least with a recent BIOS. In fact, there are some references online to BIOS update issues for this CPU.
    Let me ask a crazy question: Is it possible that I've somehow POSTed correctly and what I'm seeing now is the CPU term? I'm wondering because the numbers (42-44) fluctuate a bit.  I know that POST and POST2 can be used for CPU temp, but I'm not sure how one distinguishes between that and a debug code.

  • MOVED: Z97 Gaming 7 isn't booting under BIOS A

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=256341.0

    to what bios version live update update it?
    have you done >>Clear CMOS Guide<< with power cord removed?
    can you list full system specs see >>Posting Guide<<
    about bios recovery, boot with working bios, and go to bios setup, then select m-flash, switch your bios chips
    and proceed with recovery

  • MOVED: Z97 Gaming 7 - bios 1.6 , random SATA drives disappearing

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=183874.0

    Quote from: pandaz on 07-October-14, 16:57:17
    To Kuba..
    1. Could you state clearly what is the original boot sequence of your HDD shown in the bios?
    you mentioned that after you reset from Windows or from DOS then the sequence will changed??   how often will this symptoms happened.
    2. If you only use the Intel SSD 520 + the Normal HDD (remove DVD and the Samsung SSD) , will you see the boot sequence lost issue?
    3. What do you mean by the below??  you can't flash bios 1.5 in DOS mode???  please help explain in details
    BIOS 1.5 from the support site (no matter eu or global) won't run on Windows 8.1. the file downloaded by msi live update runs normally. Can somebody help and share BIOS 1.5 installer?
    Regards
    Orginal boot sequence:
    1: SSD Intel 520 (system)
    2: SSD Samsung 840
    3: HDD
    Mobo was traing to set Samsung at first place, but after disconnecting this drive, it put HDD on fist place. So i disconnected all other drives, and mobo shows only question marks in Intel SSD field.
    I never had any problems with this intel SSD, it works perfect, samsung behaves the same way, it disappears randomly.
    Sometimes all works correct, some times some drive is missing, it does not matter the restart is made on windows, dos, or on bios. Totally random.
    When i switch to second bios (1.3) all works fine, only on 1.6 freaking out.
    When i what start bios package from msi-support site windows shows "this app. can't be run on this system", thats all (there are 3 files i archive). File downloaded by msi-update starts normally (and this is only one exe file), unzip and run dos-mode update.  Unfortunately, I removed the file with 1.5 downloaded by msi live update.
    Maybe the bios package is dedicated to installing from usb-drive through m-flash ?
    And on the windows can update only through msi-live update? I really do not know, I'm confused.

  • MOVED: Z97 Gaming 5 - Updated drivers with MSI live update, crashed - nothing works

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=255291.0

    sounds like along with drivers, you also flashed your BIOS and this failed and caused this issue
    Quote
    I tried to put the MSI Z97 BIOS on a flash drive and reboot with that, but nothing happens. There are no beeps, just the harddrives booting up and then nothing more..
    place your old BIOS version on the USB key not renamed and place the USB key in rear USB ports
    then see if BIOS can be recovered
    else you have to RMA it as there is no dual BIOS solution on it

  • Re: MSI Z97 Gaming 7 No POST

    This is probably before they started allowing the ability to do USB rescue disks. This is why you cannot find the folders they talk about....
    I would probably suggest getting a USB DVD drive and using that instead.
    I&#39;m willing to bet there is a way to...

    This topic has been moved to GAMING Graphics Cards.
    https://forum-en.msi.com/index.php?topic=258166.0

  • MOVED: Z97 Gaming 7 keyboard freezes at BIOs

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=184251.0

    Try to remove OC with >>Clear CMOS Guide<< and see if it works fine then

  • MOVED: Z97 Gaming 5 boot loop

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=254983.0

    Hi
    Try single RAM stick
    Also try to boot when motherboard is on non conductive surface like wooden table or motherboard box
    Try clearing CMOS with power cord removed >>Clear CMOS Guide<<
    Maybe battery replacement will help
    If above fails, disconnect everything, remove CPU and inspect CPU socket with magnifying glass and bright light.
    Edit: with single RAM stick, make sure to test each RAM stick at the time, each time in different slot.

  • MOVED: Z97 Gaming 5 - SATA not present??

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=251803.0

    The thing is: cheap PSU that you've used in old build is most likely not support Haswell (Refresh) so that might be causing different issues too. And personally: yes I will defend it til the death. Cheap PSU can kill anything instantly, and the fact it works with old system... well. It's OLD system and so is PSU.
    Also you're mixing RAM. This motherboard will work perfectly with either 1, 2 or 4 RAM sticks, never 3.
    I think you should speak to the reseller OR MSI, since you think that motherboard killed all the drives (I wonder how... mobo is connected to them only through SATA cables which deliver NO power to them)..
    >>How to contact MSI.<<

  • Help! Z77A-GD65 mobo won't post - Debug LED says dE - no beeps

    I'm not sure where to start. I came home to find my computer off. Turning it back on results in all the lights and fans coming back on. No post   and no beeps. Screens are just blank.
    The 8 blue CPU phase LED lights above the CPU are all on.  Nothing unusual there.
    The Debug LED lights show "dE" which isn't documented at all in the manual. Does anyone know what this error code means?
    Z77A GD65 mobo with corei7 3770 - SSD - 4x4GB Corsair RAM - No GPU.  Otherwise nothing special.
    Where's a good place to start?  Reset the CMOS/BIOS?  Swap out memory sticks?

    http://www.ami.com/support/doc/AMI_Aptio_4.x_Status_Codes_PUB.pdf
    D3 or DE?
    0xD0 – 0xDF DXE errors
    0xD3 Some of the Architectural Protocols are not available
    Power off, battery removed, CMOS clear may be worth trying. Yes, test each stick individually in the DIMM2 slot.
    Added: Might want to hold off swapping BIOS chips until some more investigation is completed. Don't want to take the chance of possibly corrupting the backup BIOS chip at this point.

  • New Build, Won't POST, Debug code stays at 00

    I just got done building a new MPOWER MAX with an I5-4670K.  The build is a new power supply, motherboard, CPU, RAM.  Video card I was using was in an old system and worked fine.  24 pin power, and the 2x 8 pin power supplies are all hooked up.
    I have torn the PC back apart to where it's now just Motherboard, and CPU.  No RAM, no Video card, no HDD's, no DVD drive.  The system will not POST, and the Debug code never changes from 00.  I have even pulled off all the front panel Power/LED/Speaker connectors. 
    I have also tried switching the BIOS toggle switch, and cleared BIOS from the back panel.  I don't know where to go with this since it won't even give me a code of any kind.

    Quote from: Sea Dog on 08-August-14, 02:31:23
    Since the OP hasn't been back for half a year, maybe it is best for you to open a new thread listing all of your particulars of system components, etc..
    Exactly, therefor: -- LOCKED --

  • Z97 Gaming 5 Flashing / Ticking Debug Code 00

    Hi,
    My new rig I built over a week ago which was working fine, until I came home to power on and the system was not posting and I heard a consistent ticking sound coming from the tower. So I opened the side panel and audio lights coinciding with debug led were flashing 00. I've tried reseting the cmos, didn't work. What else can I do? I hope this is not bricked mobo being how young it is.. Please help!
    CPU: i5 4690k
    PSU: Corsair 750RM
    Memory: 2x8GB Corsair Vengeance
    Mobo: MSI Gaming 5
    Video: Asus GTX 970
    Storage: Samsung Evo 840 500GB

    Try to turn off your Power supply or plug out the 24pin /8 pin power cable from the motherboard, then try
    clear CMOS and wait for 1 min and then replug the power cable to the MB first.
    If still have problem, try to plug out the memory and just plug in 1 memory,  try also to plug out the Video card and use the onboard VGA first for testing.

  • Z97 G45 Won't Post

    I've read the forum and it seems I have the same issue as others here and elsewhere with the no-post problem with this board and the Intel Core i7 4790K.
    As others have reported both the CPU and Case Fan start spinning but no video out of any of the 3 on-board ports.  There is a light (Audio boost I believe) that lights up on the board. 
    Have tried swapping out the Ram (single stick all 4 slots)
    I emailed tech support and a stock troubleshooting guide but no answer to the question of what bios version is installed in this board out of the box.
    Is there any way of gleaning anything from this serial # 601-7821-050B1411219xxx
    Unfortunately I have no access to another Haswell CPU to upgrade or determine the bios.
    Specs:
           Intel Core i7 4790K Unlocked Quad Core HT 4GHZ/4.4GHZ
           MSI Z97-G45 Gaming ATX LGA1150 Z87 3PCI-E16 4PCI-E1
           Corsair Vengeance Blue CMZ8GX3M2A1600C9B 8GB 2X4GB
           Cooler Master Elite 350 Black ATX Mid Tower Case
           500 w Power Supply

    Quote from: edgatzke on 16-January-15, 04:39:12
    Thanks for your reply flobelix.
    Your comment that "There is no Z97 cpu that does not support any Haswell Refresh cpu including the K cpus"  seems to be contrary to a number of posts in other forums
    Such problems are limited to Z87 boards.

  • MSI Z97 Gaming 7 No POST

    Hello, After working successfully for about 7 months with the same setup, something happened today and the computer no longer boots.
    During the initial boot, I only see the 2 small blue led & MSI logo brighten up. None of the 2 POST LEDs show any code....

    So I managed to update from 1.19 to the 4.3 bios. My new GTX 980TI still doesn&#39;t post. Is the gfx card just not compatible?
    Win 7 64bit
    P67A-GD65 (B3)
    i7 2600K at 3400 ghz
    16GB Ram 1600
    Sandisk Ultra 256GB
    Corsair HX850
    I already tried the GTX 980TI on...

  • MOVED: z97 gaming 7 motherboard

    This topic has been moved to MSI Intel boards.
    https://forum-en.msi.com/index.php?topic=250756.0

    For back panel audio ports, you can connect Direct Audio Power and turn on the AUD_SW1 switch to get better audio quality 
    and the back panel audio jack
    the top(or left) three are mic / Line-out / Line-in, if you plug in your headphone realtek manager will also show the the function of which port you plug in...

Maybe you are looking for

  • Charging issue

    So my MBP (purchased Spring 2010) is have some issues with charging - I'll plug in the MagSafe to the computer and it will light up green for 3 seconds, turn orange 5 seconds, then fade off.  Then repeat.  It's like it is in a cycle of having power,

  • Files not compatible with macbook pro

    i have difficulty opening files on my macbook pro, the senders of the files tell me to use windows as their files aren't compatible with apple. is there a way to convert files

  • EA28 Update BUG

    After updating to EA28, I found a very disturbing bug with my phone.  I have an exchange account set up, and with that, my phone locks automatically and requires a 4 digit code to unlock.  While my phone is locked, I can now press the Emergency Call

  • Does iPhone 4 support Protected EAP (PEAP)???

    I goggled for hours and find nothing, does iPhone 4 OS 4.1 support WPA2/PEAP authentication? My office wifi use WPA2 and use a cert to authenticate, I can't seems to find this option anywhere on the phone??

  • Temperature measurements display incorrectly after opening a project.

    Dear All, I am having some difficulty in setting up LabView SignalExpress version 5.0.0 to display RTD temperature measurements from the NI9217 module and the NI cDAQ-9178. I have two problems: 1. I cannot set the waveform chart to show the desired t