Movemailbox issue: new empty calendar folder gets created after mailbox move

Hi,
when doing mailbox moves between Exchange 2010 and Exchange 2013 (CU3 and SP1) and also between two Exchange 2013 SP1 servers we experience the following issue:
sometimes a new empty default calendar folder is being created after the mailboxmove completes. Out of 230 moved mailboxes 6 mailboxes experienced this issue. For some reason the existing calendar folder is changed to a user created folder and a new
calendar folder gets being created. This causes some panic by the affected users, since they suddenly notice that their calendar is completely empty. The free/busy information other people see is also empty because they also see the empty calendar.
To correct the issue I have to manually move the items from the original calendar folder to the newly created calendar folder.
Any idea what might cause this? I don't have reproduction steps, it just happens at random during the mailbox move. The moverequest completes succesfully, no errors are reported and the movereport also doesn't contain any clues.
Frank.

But outlook wasn't running, so outlook couldn't have created the new calendar folder. I did the mailbox move out of office hours. Right after the mailbox move completed I ran the 'get-mailboxfolderstatistics' cmdlet. When looking at the output I search
for 'user created' calendar folders called 'Calendar'. The mailboxes that were affected also had another 'Calendar' folder of the type 'Calendar'. This is the newly created folder. So the mailbox contains two folders called 'Calendar' after the move. Although
I can't reproduce it, I'm able to detect when it happened by looking at the output of the above cmd-let.

Similar Messages

About Resource Object which get created after careting GTC flat file conn.

Hi,
I have one query:
Whenever we create GTC for flat file reconciilation it creates new RO & new Process definition etc.
So in this case in OIM there are two ROs one for Proviioning process and another which get created after we create GTC for reconciilation.
But I don't want two seperate RO for single resource.
what we can do?

Hi
I'm using single host implementation OWB10g/Oracle on same host.
My flat file location is
c:\source\dept.txt
Pl tell me if I have to save the same file on any particular location for OWB to read.
Implementation in OWB10g
1. Created Flat File module, selected Connector & Location Details.
2. Done mapping for source file & target table.
3. Validated & Generated the mappings.
4. Deployed the mapping in Deployment Manager.
5. Following was Error Message after execution of the mapping.
Can not read data from file
c:\souredept.txt
OPTIONS ( ERRORS=50, BINDSIZE=50000, ROWS=200, READSIZE=65536)
LOAD DATA
CHARACTERSET WE8MSWIN1252
INFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.txt'
BADFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.bad'
DISCARDFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.discard'
INTO TABLE "{{TARGET_LOCATION.Schema}}"."DEPT"
APPEND
REENABLE DISABLED_CONSTRAINTS
FIELDS
TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
"DEPTNO" POSITION (1) INTEGER EXTERNAL ,
"DNAME" CHAR ,
"LOC" CHAR
Thx in advance

IDOCS get created After one day?

Hello all,
the outbound idocs are get created after one day delay,
After uploading the materials the idocs have to generated through program RBDMIDOC and need to be posted immediately .
RBDMIDOC-scheduled at 10 mints .
but in our scenario the idocs are generated after one day delay..
what could be the reason?.
it's urgent .
Warm regards
Nandan
Edited by: Nandan ND on Feb 19, 2008 12:47 PM
Edited by: Nandan ND on Feb 19, 2008 1:35 PM
Edited by: Nandan ND on Feb 19, 2008 1:36 PM

Hi,
Check whether program RBDMIDOC is scheduled only once? If it is running only once then you this will happen.
And also schedule the job to execute only after your upload process is over.
Regards,
Ashok

Does preview catalog will get smaller after deleting movies/pictures from Lightroom 4.0 assuming ...

Does preview catalog will get smaller after deleting movies/pictures from Lightroom 4.0 assuming the option 'Automatically discard 1:1 previews' is marked 'Never'?

Yes, but it may not be apparent immediately. The previews are "held" for a time to save rebuilding if the associted file is reimported or the removal undone.

Empty files are getting created at receiver FTP server

Hi Experts,
I have an Idoc to File scenario where I am sending an XML file to receiver FTP server.
Scenario is working fine but sometimes an empty file is getting generated at receiver FTP server.
I have already selected ignore empty file at receiver channel so issue is not within PI system configuration.
When I checked the message log I can see that almost all the files are getting created successfully without any issues, but
for some files/messages I can see that there are below error logs.
"Transmitting the message to endpoint <local> using connection IDoc_AAE_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections"
"Exception caught by adapter framework: Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections."
And after there is again success message log in the same message and it creating a file successfully during that time stamp.
but the third party is sometime receiving empty file which I am not able to find in any trace or log (my file name is SD_timestamp.xml).
Can you please let me know what is the solution and what adjustments FTP server need to do in order to resolve this issue.
Thanks in advance.
Regards,
Rahul Kulkarni

The error you are getting that says "Could not get FTP connection from connection pool (1 connections) within 5,000 milliseconds; increase the number of available connections" has probably nothing to do with the empty files problem.
I second Hareesh Gampa that you first should try "temporary file creation". You might also need to tell the FTP owner that he should only pick up files with that are written completely and that do comply with a negotiated file name schema. The temp file should have another schema of course then. He should not pick up just every file that is written. See here for details
http://help.sap.de/saphelp_nw74/helpdata/en/44/6830e67f2a6d12e10000000a1553f6/content.htm
HTH
Cheers
Jens

OraInstall timestamp folder gets created daily at /tmp + GridControl.

i have a environment with oracle 11g grid control and in few servers exactly at midnight everyday orainstall<TimeStamp> directories are getting created. So i think daily there is some kind of silent install getting triggered.
so i have checked deployment and deployment procedures in grid control, and could not find anything related to this.
i checked database level jobs, nothing here as well,
i check crontab, nothing here as well,
just for a day i stopped the oracle agent and did not see the orainstall getting kicked at midnight, so atleast i can rule out the operating system part.
this is how the folder looks like
host1:agent (1006) $ cd OraInstall2012-05-20_12-00-15AM
host1:agent (1007) $ ls
AttachHome2012-05-20_12-00-15AM.log jre
OPatch oui
command_output_9019432
and there is a silentInstall.log in /tmp
host1:agent (1012) $ more silentInstall.log
silentInstall.log
OUI-10198:Unable to create a new Oracle Home with name OracleHome1. An Oracle Home with this name al
ready exists. Please select another name.
Can anybody here show me some directions to find what is really happening ?

Hit with Bug Bug 11864343
Refer:
EVERY NIGHT AGENT IS CREATING A DIRECTORY ORAINSTALL<TIMESTAMP> UNDER /TMP [ID 1342547.1]

Mapping Issue: Target IDoc structure not getting created properly

Hi Experts,
I am stuck with a strange problem in my mapping. It is a M:N scenario mapping where we have multiple IDocs in source as well as in target.
For example, in source Queue-1 I am getting values as [SUPPRESS, true, true, true, true] and in the in source Queue-2 I am getting the values as [1,2,3,4,5]. I used MapWithDefault function to match the number of values in both the queues but in the target IDoc the node (say TMPN) is created only 4 times because of the condition put at the target node. So, the target node should have values as [1,2,3,4] but it gets values as [2,3,4,5] because the first target TMPN node is not created in the first target IDoc. I can provide you with the skeleton of the map. Hope this will give you a fair idea. Let me know if you require more details.
1. Target Structure:
    IDoc - No TMPN Node
    IDoc - 1 TMPN Node
    IDoc - 2 TMPN nodes
    IDoc - 1 TMPN node
Condition put on target TMPN_Node ---> (created only 4 times due to condition)
2. Mapping Skeleton:
Values coming from Q1 (SUPPRESS, true, true, true, true) --->
                                                                                \===>FORMATBYEXAMPLE+SPLITBYVALUE==> TMPN-F0 [2]
                                                                                /                                                                              TMPN-F0 [3]
Values coming from Q2 (1,2,3,4,5) -
>                                                                               TMPN-F0 [4]
                                                                                TMPN-F0 [5]
Where F0 is the field which is created when TMPN Node is created. So, if TMPN gets created 6 times, the F0 gets created 6 times.
Please let me know if there is an alternative to this problem. How can I have values as [1,2,3,4] in field F0 instead of [2,3,4,5]

hi,
i got the email.
as i can see your mapping seams to be rigth, but there is sometrhing i dont get. in a previuos post you said:
I am stuck with a strange problem in my mapping. It is a M:N scenario mapping where we have multiple IDocs in source as well as in target.
For example, in source Queue-1 I am getting values as SUPPRESS, true, true, true, true and in the in source Queue-2 I am getting the values as 1,2,3,4,5. I used MapWithDefault function to match the number of values in both the queues but in the target IDoc the node (say TMPN) is created only 4 times because of the condition put at the target node. So, the target node should have values as 1,2,3,4 but it gets values as 2,3,4,5 because the first target TMPN node is not created in the first target IDoc. I can provide you with the skeleton of the map. Hope this will give you a fair idea. Let me know if you require more details.
1. Target Structure:
IDoc - No TMPN Node
IDoc - 1 TMPN Node
IDoc - 2 TMPN nodes
IDoc - 1 TMPN node
lets asume you define as default value "1"
now, the result of the formatByExample taking the example you sent to me is:
1,T1,T2,T3,T4 without context change. and the result of the function splitByValue should be what you are specting.
but its something that is not clear still,
could you post the result of the mapWithDefault? i think your problem is there.
Rgds
RP-.

Calendar items get deleted after computer restart

Hi, I keep having this problem of my calendar items getting deleted/cleared after I restart my computer. Basically, I sync my handheld on two computers, one is work PC and the other my home PC. Changes are done on both PCs. I modify items on my work PC then sync with the handheld. When I get home, mostly during weekends, I also sync my handheld with my home PC. No modifications are done on the handheld. These past few days, I just noticed my calendar items in the Palm Desktop that the items I added/modified a day ago is no longer there. I have already lost a couple of appointments because of this. Please help.
Post relates to: Centro (Unlocked GSM)
This question was solved.
View Solution.

With Palm desktop 6.2 there is an issue with losing data but it is mostly seen on Vista systems. This issue has been escalated to Palm Engineering.
When you shutdown your PC, do you close Palm desktop or leave it open? We have seen leaving Palm desktop open, when the PC is shut down, to cause data loss. Another cause of data loss can happen by having Palm desktop open when a Windows update occurs. If you are not using Palm desktop, close it.
Here is a procedure for recovering the data.
You can recover the data from your user folder provided you have only sync'ed once with the PC when you discovered the data missing. When you sync to the PC there are files created for each PIM category in your user folder. For Example; datebook.dat or datebook (Depending on the version of Palm Desktop) and datebook.bak. Using Palm Desktop version 6.2 the file names are .mdb and mdb.bak. For 6.2, the files are located in the username folder in PalmOSdesktop in my documents.
The files are named .dat and .bak. When you sync, the current data is stored in .dat. The next time you sync the data in the .dat file is copied to the .bak file. You can rename the .dat to .old. then rename the .bak to .dat. If the data in the .bak file is intact, it will now be in Palm desktop when you reopen Palm desktop. I have included a link to show you how to find the userfolder on the PC.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=26674
Here is another link regarding data loss;
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=39503
The best way to backup your data is to use the export feature in Palm Desktop. Make a new folder on the PC desktop named Palm Desktop Backup data. Next, select the category you want to export. You will get a window that asks where you want to save the file, save in the folder created on the desktop. There is a button that allows you to select currently selected record or all, select all. If you don't select all, then only the record highlighted is exported. You will then need to name the file for export, I suggest the name of the category, eg: datebook (With current date). Do this for all critical data in each category. With the data exported to the folder on the PC desktop, you can save this data to a flash drive, external hard drive or a CD-RW. With this method you will have your data in a seperate place than Palm desktop and the device. If you "Lose" data again, you can import the data back into palm desktop.
Make sure that when you make changes in palm desktop or the device to export the data to the folder created for the backup.
Here is a link for other options for backing up your data;
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28751
Here is a procedure for backing up your data for disaster recovery, like this situation.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Post relates to: Palm i705
Message Edited by cygnusX1 on 03-20-2009 02:53 PM

Backend PO not getting created after EHP6 upgrade

Hi Friends,
Recently there was an SAP patch upgrade in ECC 6.0 and after that while creating the shopping cart the PO is created, but it is not transferring to ECC. We are using the extended classic scenario SAP SRM 7.0. I had checked almost everything right from debugging still clueless. even checked the forums but still the issue is not resolved. Any hints of how to proceed now.
Regards,
Ramesh.

When We are creating shopping cart, system will create Po in back end based on our BAPI.
Check whether BAPI is running properly or not. You are updated new version EHP6 , I hope you should do required configuration. Try in development server whether Po are creating backend or not.
I hope you should check all the configuration in backend system i.e in ECC and SRM side.
Do again batch running and check whether back ground job getting created or not.

IMac creates a new, empty Library folder at startup labeled 'Library

This is a weird one. Every time I startup, my computer creates two folders within my Home directory. One is labeled 'Library, and the other is just the ' sign. Within the 'Library folder is a folder labeled Application (note that it's singular, not the normal plural Applications). The actual Library folder is undisturbed. Any ideas what's going on?

The setting is in Aperture-->Preferences. Just select the library you want to use, then exit the Prefs. Quit Aperture. Relaunch. It will use the library you selected.
If you double clicked on a library to open Aperture, it will make that setting in Prefs for you so the next time it should open that library again (assuming it's available at the time, not sleeping as externals often do).
Mark

How does an "iPhoto Library Copy" folder get created? It has an icon that looks like a stack of photos with a pink flower. It contains all my photo's (as far as I can tell) and the original "iPhoto Library" only contains "AlbumData.xml?

I upgraded to Lion last month AFTER wiping the hard drive for the second time on my 2011 macbook pro. I am now suspecting that transferring my photos (I have over 8,000 saved on sd cards) to my computer is bringing all this trouble.
I was able to rectify some problems by dragging import file from library to desktop etc... But I am worried that these Copied Libraries and recovered photo files and AlbumData.xml file are a sign of something darker loomng ahead...

Sorry but we have no idea what's going on, or gone on, on your machine. Neither can we see it. We only have your somewhat sketchy post. You mention that you can rectify "some problems", you mention "all this trouble" but neglect to mention what these problems and trouble actually are. So, I'm afraid it's hard to respond to your post in a meaningful way.
A couple of thoughts: 8,000 photos is not a problem. iPhoto is good for 250,000 in any one library. So, unless you have very limited HD disk space, this is not the source of whatever issues you are having.
If you're dragging parts of the iPhoto Library around the place, yes there could be trouble ahead. Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
There are two ways to get a copied library: one is to duplicate the Library yourself (either accidentally or deliberately) or while restoring from back up.
Regards
TD

PT 8.5 new installtion, ALTER script getting created wrongly on Oracle 10g.

Greetings!
I'm trying to Install HRMS 9.1 with PT 5.0 on Oracle 10.2.0.1. I believe i have been following installation steps as documented. As part of storeddl.dms i executed only ddlora.dms only , remaining databases related lines commented out. The next step after this is ALTERING the tables after importing PPLTLS84CUR project.
When i created SQL script for ALTER... I have chosen ALTER BY Table Name option as specified. Problem in the script is even for LONG columns also it is creating INSERT SELECT statement which is not supported by ORACLE for LONG columns. in reality it suppose to create a PL/SQL snippet where ever it sees a table with a LONG column. Instead it is creating simple INSERT SELECT. Thus Alter process generating errors , at the end i wouldn't have data into those tables with LONG columns. becz the of the build sequence of steps...
#1 Create temp, #2 insert actual into temp, #3 Drop actual, #4 Rename Temp to actual . since #2 errored out the temp wouldn't have rows , #3 drops original which has rows, #4 renames the empty table to Original table..
Is there any piece i missed... Thanks in advance....
Edited by: Rama R Damisetty on Jun 11, 2010 12:26 PM

Nicholas Thanks a lot.
These are steps in the TASK7A -16 (Updating Database to Latest People Tools Release).. in Installation document... previously i misunderstood and skipped only "Cleaning up the data" first bullet pointed... and continued the remaining.. So can i skip whole task?
Thanks again..
• Cleaning Up Data
• Updating PeopleTools System Tables
• Updating PeopleTools Database Objects
• Updating PeopleTools Multilingual Objects
• Deleting Obsolete PeopleTools Database Objects
• Applying Patched PeopleTools Database Objects
• Altering PeopleTools Tables
• Migrating Records to New Tablespaces
• Updating PeopleTools System Data
• Running PeopleTools Conversions
• Converting Integration Broker
• Running Additional PeopleTools Conversions
• Changing the User Interface

New task record not getting created in BPM workspace.

Hi,
We have a BPM Process which has 2 roles. SKURequester and SKUChangeAnalyst.
When we initiate the flow , it opens up a screen and we populate data and click "SUBMIT".
It goes to ChangeAnalyst for approval.
It is working fine in Development Env.We could see a new task created for ChangeAnalyst once the requester SUBMIT's his task.
But in Test env, Once the requester submit's his task .It's not creating a task row for ChangeAnalyst in BPM workspace.
We verified the roles assigned to the user.Everything is same.
Repeatedly seeing the following error in LOGS.
Please help.
[2013-01-10T08:14:38.823-05:00] [soa_server1_1] [TRACE] [] [] [tid: [ACTIVE].ExecuteThread: '13' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: mudumbs1] [ecid: 0000Jk^aH_F9lZX_xt1FiW1GvUks000E9Q,0] [SRC_CLASS: oracle.bpel.services.workflow.client.config.ClientConfigurationUtil] [APP: OracleBPMWorkspace] [dcid: 8c22b87477b0f4ec:7ad8260b:13c21624156:-7ffd-000000000001a629] [SRC_METHOD: getClientConfiguration] WorkflowServiceClientContext: Cannot find client configuration file: wf_client_config.xml
[2013-01-10T08:14:41.684-05:00] [soa_server1_1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: orabpel.engine.pool-9.thread-15] [userId: mudumbs1] [ecid: 0000Jk^_u3x9lZX_xt1FiW1GvUks000E80,0:1054:100000592] [APP: soa-infra] [composite_name: SKUManagement] [component_name: CreateRequest] [component_instance_id: 23520007] [dcid: 8c22b87477b0f4ec:7ad8260b:13c21624156:-7ffd-000000000001a625] [composite_instance_id: 24141524] Database Adapter SKUManagement:Get_Site [ Get_Site_ptt::Get_SiteSelect(Get_SiteSelect_inputParameters,XxskuWizardResultsCollection) ] <oracle.tip.adapter.db.DBAdapterConstants getUniqueProcessIdentifier> Unique process identifier will be SKUManagement_default_SKUManagement_2_7_soa_1f700a1d_07c4_41ed_b74a_795a88fdc1c0_Get_Site[[
[2013-01-10T08:14:41.860-05:00] [soa_server1_1] [NOTIFICATION] [] [oracle.soa.adapter] [tid: orabpel.engine.pool-9.thread-15] [userId: mudumbs1] [ecid: 0000Jk^_u3x9lZX_xt1FiW1GvUks000E80,0:1054:100000592] [APP: soa-infra] [composite_name: SKUManagement] [component_name: CreateRequest] [component_instance_id: 23520007] [dcid: 8c22b87477b0f4ec:7ad8260b:13c21624156:-7ffd-000000000001a625] [composite_instance_id: 24141524] Database Adapter SKUManagement:Get_Site [ Get_Site_ptt::Get_SiteSelect(Get_SiteSelect_inputParameters,XxskuWizardResultsCollection) ] <oracle.tip.adapter.db.ox.TopLinkXMLProjectInitializer initialize> Initializing toplink project for use by the database adapter.[[
[2013-01-10T08:14:42.496-05:00] [soa_server1_1] [ERROR] [] [oracle.soa.bpmn.engine] [tid: orabpel.engine.pool-9.thread-15] [userId: mudumbs1] [ecid: 0000Jk^_u3x9lZX_xt1FiW1GvUks000E80,0:1054:100000592] [APP: soa-infra] [composite_name: SKUManagement] [component_name: CreateRequest] [component_instance_id: 23520007] [dcid: 8c22b87477b0f4ec:7ad8260b:13c21624156:-7ffd-000000000001a625] [composite_instance_id: 24141524] <CubeEngine::handleWorkItem> This was an internal error. The flow was not generated correctly by the BPMN compiler. Root cause : null
[2013-01-10T08:14:42.497-05:00] [soa_server1_1] [ERROR] [] [oracle.soa.bpmn.system] [tid: orabpel.engine.pool-9.thread-15] [userId: mudumbs1] [ecid: 0000Jk^_u3x9lZX_xt1FiW1GvUks000E80,0:1054:100000592] [APP: soa-infra] [dcid: 8c22b87477b0f4ec:7ad8260b:13c21624156:-7ffd-000000000001a625] <BaseCubeSessionBean::logError > *Error while invoking bean "cube delivery": Exception not handled by the Collaxa Cube system.[[*
an unhandled exception has been thrown in the Collaxa Cube systemr; exception reported is: "java.security.PrivilegedActionException: ORABPEL-02118
Variant not found.
The variable "ReRequesterUserTask_activity12_out" is not declared in the current scope. All variables must be declared in the scope before being accessed.
This was an internal error. The flow was not generated correctly by the BPMN compiler.
Contact Oracle Support Services. Provide the error message, the composite source, and the exception stack trace in the log files (with the logging level set to debug mode).
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:373)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.security.Security.runAs(Security.java:61)
     at oracle.security.jps.wls.jaas.WlsActionExecutor.execute(WlsActionExecutor.java:48)
     at oracle.security.jps.internal.jaas.CascadeActionExecutor.execute(CascadeActionExecutor.java:52)
     at com.collaxa.cube.engine.CubeEngine._performActionAsSubject(CubeEngine.java:5423)
     at com.collaxa.cube.engine.CubeEngine._performCallbackPerformer(CubeEngine.java:5365)
     at com.collaxa.cube.engine.CubeEngine.callbackPerformer(CubeEngine.java:1249)
     at com.collaxa.cube.engine.delivery.DeliveryHelper.callbackPerformer(DeliveryHelper.java:636)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleCallback(DeliveryService.java:1027)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleCallback(CubeDeliveryBean.java:392)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
     at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy243.handleCallback(Unknown Source)
     at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDeliveryLocalBeanImpl.handleCallback(BPMNDeliveryBean_of8dk6_ICubeDeliveryLocalBeanImpl.java:66)
     at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMessageHandler.handle(CallbackDeliveryMessageHandler.java:47)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:141)
     at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTask.java:82)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619)
Caused by: ORABPEL-02118

Hi Juhi,
Go to transaction RZ20 and check out if the corresponding BAPI is executed. And also check the traces
Regards,
Kalyan

IdM 8.1 New Labels are not getting displayed after upgrading from 7.1

We have recently upgraded IdM 7.1 to IdM 8.1 and after upgrading the New Labels as New Navigation Menu's in Admin panel are not getting resolved and
Appearing following way
UI_APPR_XML_PROVISIONER_EMPTY_TABLE
UI_APPR_JAVA_LIST_PROVISIONING_REQUESTS_LABEL
We have checked these labels are there under WPMessages_en.properties file (under idmcommon.jar) but still they are not getting reflected.
Any help on this will be appreciated.

May be your location credentials out of sync.
Un-register and re-register the locations
1)Right click the location in the Control Center manager and select Unregister
2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

Is anyone having an issue with their iPhone 6 getting hot after loading the iOS 8.1.2 update?

I finally loaded the iOS 8.1.2 update to my iPhone 6 yesterday. I've noticed that my battery seems to be draining faster and my phone is getting really hot if I use it for any length of time. Is anyone else having this issue? Is there a fix? Thanks!

Hi This maybe a Hardware problem make an Appointment at Apple Store They may replace it. Cheers Brian

Movemailbox issue: new empty calendar folder gets created after mailbox move

Similar Messages

Maybe you are looking for