Movement of Gas cylinders as RTP material
Hi
I have a business scenario where my client uses to procure gas cylinders with filled Oxygen gas. The filled gas cylinders are received into warehouse. After that those cylinders are issued to consumption. After the gas has been consumed empty cylinders are returned to warehouse. After that those empty cylinders are returned to vendor from warehouse. Delivery charge for returning those empty cylinder to the vendor is borne by my client. As per my knowledge I can track those cylinders as Returnable transport packaging material. And I can receive these cylinders into warehouse in MIGO through 501 M Movt type(GI receipt to RTP). But I am not able to find out how issue of these cylinders to consumption and return of empty cylinders to warehouse to be mapped in SAP.
Can anybody tell me how to map this business scenario in SAP and also how to book the delivery charges into SAP for returning empty cylinder to vendor.
I will reward point if useful
thanks
Amitava
Friend
Check BPP in the following link
http://help.sap.com/bestpractices/BBLibrary/Documentation/J60_BPP_EN_DE.doc
Else
The process flow is as below
1.Let your customer create a material for cylinders as material type RTP
(Returnable transport package)
2.Let him enter the intial stock issued to the vendor via Transaction code
MB1C (GR without purchase order)
3.He can have the track of the issued RTP in MMBE Transaction at plant level
4.The vendor must me maintained centrally with TC XK01
5.Inforecord for RTP should be maintained.
6.When he receives the filled cylinders let him create PO the RTP material
and when you click on the icon transport euipment in MIGO TC it will take
you to goods issue of 502 Movementtype for the cylinders which are to be
send back to the vendor.
ENJOY SAP
Regards
Edited by: Gopal SP on Mar 25, 2008 12:39 PM
Similar Messages
-
RTP MATERIAL RETURM IN MM SIDE
Dear Experts,
I received RTP materisl throuh 501 M movement ,how to return the RTP Material to the vendor ,through which movement type.
Regards
V.RamakrishnaHi,
Use 502 M movement type for returns.
Regards,
Narayana. -
How to handle gas cylinders material type
HI Gurus OF MM,
I want to create a material type as cylinder (ex.oxygene,acetlene cylinders for production ).
Its is inwarded through stores and it is consumed by the Production activities(Cost center).After the utilisation( after cosuming
) he is returning it to stores as empty cylinders.
Again frm stores its is returned to Vendor.
How i could issue this material to the cost center and how i can get it back.
How i could inward that material Through Purchase Order ???What is the procedure for PO also.
Any movt type is their and if so suggest me in detailed way?
Any one have faced this type of issues just share with me also.Rajesh
Follow the below steps.
01. Create Gas as Raw material
02. Create Cylinder as RTP material ( LIEH)
Create Purchase order for Vendor
Post the GR with reference to Purchase order 101
Click on Transport equipment icon (extreme right icon in the middle of screen) > enter material, qty, loc, vendor , for this movement type 501 M will trigger
and Save the document
You can see the returnable packaging cylinder in stock , and post reversals through movement type 502 M
Hope this clarifies
Thanks & Regards,
Sridhar -
Scenario: GR of filled gas cylinders
All SAP Gurus,
We have following scenario:
1. Empty Gas cylinders are provided to vendor
2. Vendor sends the filled Gas cylinders to us
How to map this scenario?
Regards,Hi,
Treat gas cylinder as RTP i.e. returnable transport packaging.
Issue that material (Cylinder)to vendor.
Create a PO for gas(this should be consumable item) with account assignment category K-Cost center.
Now in MIGO, with this gas, accept the cylinder with movement type 501M.
Hope this will help you.
Regards,
Piyush -
Handling Empty Gas Cylinders !
Hi
We have a requirement wherein we are buying gas cylinders & we want to keep a track of empty cylinders with their Serial Nos.
Has anyone handled a similar business requirement ? Can anyone pls suggest some write up on this.
Regards
--VikasIf you define the enoty cylinder is an assett then you have to create the dummy mateirla for cylinder and receive them whenever you receive the real gas cylinder that way you can keep a track OR
if this is not an asset then you just create and empty material and use as a rerunable when you create Po -
Hello Guys,
Can anyone help on this issue.
Mov.aver.price cannot be determined.Material RMWE,plant 7210,billing docCAPE_01
Message no. Z1022Rajesha,
Typically the trans./event keys hit on GR against a PO are BSX (inventory/stock posting) and WRX (GR/IR clearing). If the material is subjected to standard price control, you will have an additionally have the PRD key (price difference posting).
If you go to OBYC and see the account assignments for the PRD trans./event key, you will notice that you can have a different price difference income/loss account based on the material (valuation class), plant (valuation grouping code) and the account modifier (mvt type). In your specific case, the account modifier is blank and there does not seem to be a provision to define a new account modifer and link it to mvt 101 for the required combination (that I mentioned in my previous response). This seems to be the problem unless I am missing something here. For instance, in the case of a 201 mvt or a 101 receipt against a production order, the required combination is available in OMJJ and hence it is possible to define and link a new account modifier to a new movement type and hence use a different account for different circumstances. I am just not sure why SAP has not provided this option for your scenario.
Hope this helps.
H Narayan -
Movement type issue-Generate HU packing material item in inbound dlv
Dear All,
I am using handling unit management with automatic generation of packaging material item in outbound and inbound delivery.
I am facing a problem in inter-company and intra-company STO flows.
For inter-co flow, I create PO doc type NB and an outbound delivery. When I do GI for this, and inbound delivery (EL) gets created. The movement type for generated packing items is 601 in outbound deliveries and 501 in inbound deliveries. That is working fine.
For intra-co flow, I have PO type UB and outbound delivery. When I do GI, again the inbound delivery type getting created is EL and the movement type for generated packing item in inbound delivery is again 501.
According to SAP:
Movement types for stock transfer within a company code:
For the movement types of the generated packaging material items, you use
603 (outbound deliveries) and 605 (inbound deliveries).
Movement types for stock transfers between company codes:
For the movement types of the generated packaging material items, you use
601 (outbound deliveries) and 501 (inbound deliveries).
Any ideas?Hi,
Sorry, I think I made a mistake.
I have just found out that it's not possible to assign several confirmation category....
Since you are using SPED output, system calls FM GN_DELIVERY_CRATE to create inbound delivery.
Maybe you need to do modification.
======================================================================
Main Program SAPLV50S
Source code of LV50SF19 64
ENDIF. "^_983945
LIPS-UEPOS = POSNR_UMSETZUNG-NEU.
ENDIF.
ENDIF.
SPE OUTB combination of unchecked -> special case, gn_vwpos is initial
IF XKOMDLGN-VWPOS IS INITIAL AND V50AGL-UCDEL_TO_DEL_COMB IS INITIAL.
GN_VWPOS = XKOMDLGN-VGTYP.
ELSE.
GN_VWPOS = XKOMDLGN-VWPOS.
ENDIF.
======================================================================
Here is where system set USAGE for item category determination.
In standard logic, for PO inbound delivery, it's using 'V' to determine item category.
If you need, maybe you can consider to do modification here to set different USAGE indicator to determine different item category. -
Move the stock from the raw material storage type to production storage typ
Hi
How to move the stock from the raw material storage type to production storage type.
note that both stoare type be in same storage location only.
pls reply meHi Raj,
I WM process, issue or transfer to Production process results in picking of material from the RM storge location / storage type.
If you mean your production stoarge location is same as that of the RM stoage location, it is just a tranfer within a warehous.
which you could do with posting change document. This doesnt reduce your WM stock.
If the production stoarge location is differnt from RM stiage location, then it is picking process from WM and goods issue.
this reduces your WM stock.
hope it helps.
Regards
Harish -
Hi all,
What kind of Material type would be for empty anf full cylinders and luricant drums.
At PO, what are the items to be included for procurement.
During Goods issue, what are the items to issued?.
Also i have requirement that, i should get a report saying that particular department is suppose to return this no empty cylinders and drums. Issue may be in last financial year, But how to get the empties back in the current financial year.
Thanks.Hi,
You can use the Material type LEIH -- Returnable Packaging.
You will recieve these materials in 501 with special stock indicator "M"
These materials can be issued to other departments using 311 mvt type as there is accounting documents generated in 311 mvt type. Later you can recieve that drums without any financial implications.
You check the all the details of movements in MB51 with mvt type 501 & Special indicator "M"
stock can be checked in MB53 & MMBE with particular coloumn
rgds
Chidanand -
RTP MATERIAL PO - AC ASSIGN,MENT
hI
I'm tring RTP process, where i created raw material with ROH and returnables with LEER as material type.
while entering in po, 1st line item for roh material and 2 nd line item for LEER mat type and ticked ret indicator for 2nd line item.. where i 'm getting a error "account assignment is mandatory" why its giving and how to solve it...Hi UJ,
For RTp, the material type is LEIH
and the procedure is
1) Create material code with material type LEIH
2) Receive that material in MIGO with movement type 501M (Accounting document will not be created)
3) Issue it back to the vendor with movement type 502M in MIGO.
We wont create any purchase order for that.
Regards,
Prasath -
Mb1b movement 453 - profit center not from material but from sales order
Dear All,
we have the problem that by return process from sales order stock to free stock (453 movement) we would like to have the original Profit center from sales order, but as SAP standard it moves PC from material master.
we have implemented already oss 978159 sowie 1038490, but did not help.
Since days we try to find an uxer exit in MM or CO!? where we could write in the correct profit center. But unfortunately PC from material master pops up at the end of the process, and the system overwrites it again and again.
Had sy of you similair problem? can you please help with an user exit?
Thanks,
BBHi
I think this behaviour is correct.. Since you are moving from Sales order stock to Unrestricted stock, the PC from mat master would prevail...
As far as I know, this behaviour is correct
Regards
Ajay M -
Which movement type to show Directly Procured material in stock?
Hi All
Is there another movement type that I can use to reverse from a network, Directly Procured material in to stock?
Our issue is that we plan and have delivered directly procured material to out production plant (Plant A) and the PO has an account assignment of 'N'. The production team then decide (due to unforseen issues) that they do not need it anymore for that network/WBS and want to send it to our central warehouse (Plant B)
In order to recover the cost from the network, we process MB1A mvt 222 with reference to the WBS in Plant A and then stock transfer to our central warehouse, Plant B
My question is....can we use another movement type to remove the cost from the project/network/WBS and return the material in to stock?
I don't want to reverse the PO but can i use that as a reference?
Your help is appreciated
Regards
DarrenMB1A transaction is a goods issue
goods issues are valuated with the material master valuation price.
in goods issues you cannot reference purchase orders (this is only possible in receipts)
there is no goods receipt transaction for material which was already received against a PO.
You credit the network with the leading price from material master, there is no value flow in the opposite direction. But you can control the valuation if you allow external value entry in the movement, which is usually not liked by auditors, especially as such movements are executed by warehouse personnel -
Two step 303, 305 movement stock transfer for split valuatin material
Hi expert,
we are using split valuation for material in IS -Retail for both warehouse as well as store. when i am transfer material from store with movement type 303, message is showing'Use one-step procedure for transfer posting to art. subj. to valuation'.
we wave to use this method in case of split vauation material.
how we can do.
Regards,
SantoshHi Santosh,
Try to transfer material using TCode MB1B with Mvt type "301".
Movement Type "301" is used for stock transfer - One step process.
So when you post transfer using Mvt. Type 301, the receiving store will not require to do GRN for that material.
Hope this helps you. Let me know in case you need some more info.
Regards,
Nikita -
Movement Type for GR to Post material in COST center
Hi ...
Do I need to use 101 Movement type even to Post Material into consumption...
or
in simple words if i have account category "K" in Purchase Order then which Movement type I should select to prepare GR and do I need to use same MIGO transaction.
Regards/SANDEEPHi,
Basically <b>101 Movement type</b> would mean that the Goods are being received into the enterprise (could be a Warehouse,Cost Center or a Logical Storage location).
<b>Migo</b> is a transaction which enables to document the Goods Receipt and henec this needs a reference document which could be a PO ,Production Order etc,.
In the normal Goods Receipt into a Warehouse against a PO the Goods are valuated(Inventorised in Physical & Financial Terms).
In the case of the goods received against a PO for cost center the value is directly posted into the <b>Consumption account</b> instead of the <b>Stock account</b> in case of the former
I hope the above is sufficient.
Thanks & Regards,
Nagarajan -
Stock Transfer using movement type 309 of in-transit material
Hi Gurus,
We have a scenario where we want to post a 309 movement type on an intransit STO stock (sto is done from PWO, this is done to solve a SOX compliance problem). But it seems that this is not possible as the 309 can not be posted without a s. loc. Is there any alternative to this? Can a two step transfer using 313 and 315 do the trick? Please advise.
ThanksIn real life you cannot do anything to a material that is somewhere on the road, hence it is pretty limited what you can do in SAP.
What exactly do you want to do?
Maybe you are looking for
-
How do I transfer my iTunes library from old Vista computer to new Windows 8
How do I transfer my iTunes library from an old vista PC to new Windows 8 computer, can I utilise my I pod 160Gb classic, any help would be appreciated.
-
BAD_CERTIFICATE error calling a web service over SSL in ALSB 2.6
We have a business service on an ALSB 2.6 server (running on WL 9.2.1) that connects to a web service over SSL. When we try to run it, we get the following exception: <Sep 17, 2009 7:49:17 AM PDT> <Error> <ALSB Kernel> <BEA-380001> <Exception on Tran
-
Material Ledger Unit Of Measurement different from Material Master
Dear Team, In my client, there is a difference between unit visible in CKM3N and MM03. The base unit of measurement in MM03 is MT. Other than that, there are some other units maintained (not M3) in additional data tab in material master. In CKM3N, th
-
I created a Pages document on my iPad mini, and now I cannot open it again. When I try to open the document there's a pop-up that says "Document can't be opened". Can someone help me? It's kind of urgent! Thanks!!
-
Error message when I try and install Evernote Clipper Add-On
When I try to install Evernote Clipper Add-On I get an error message. "Firefox cannot modify Add-On" Any advice out there?