Movement of Material from Quality.

Hi ALL,
The inspection lot is created with Insp. type "04" ..'Goods receipt inspection from production'...The usage decision as "DEV2" has been  made for the lot...but the qty for offgrade  has been posted to Quality instead of unrestricted. and new insp lot of type '08' is created..for the offgrade..
On analysis it is found "Post to insp stock " indiactor was not set...So this takes care of all future lots...But for the current lot how to move the material from Quality to Unrestricted...SAP does not allow to carry out UD for the 2nd lot.."08" .
Your help is required..
Thanks,
Regards,
Ameya K.

Hi Sriramachandra,
Thanks for the reply..Actually now two inspection lot exists...one with type"04' whose UD was done as "DEV2" devalue for scrap..and as a result system prompted to enter the Offgrade material ...
As a result new lot got created with new batch for the offgrade...Now do i have to create insp plan for the offgrade...or is there any other alternative...?
Thanks
Ameya k.

Similar Messages

  • Moving material from quality to unrestricted

    Hi Experts,
                     We have a scenario where the user has given the UD but the stock posting tab was missing in the QA32 screen, so stock posting could not be done. Now in the stock overview the material is available in quality stock only. We want to take the material to unrestricted stock. Inspection types 01, 08 and 09 are active in material master. Please advise how to proceed? If we try to transfer material from quality to unrestrictedthrough 321 movement in MB1B, we are getting error message "change inspection stock in QM only ". Please advise.
    Regards
    Sm.

    Hi
    08 is Stock transfer
    The QM component cannot manage stock movements for inspection lots that were created manually.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/89/9bb43418e43b4ae10000009b38f83b/frameset.htm
    This inspection lot is created automatically during stock transfer or created manually ?
    Alagesan

  • QM: How to Move material from quality stock to unrestricted stock

    Hi,
    How to post material stock from quality to unrestricted without using 321.
    Regards,

    Hi,
    if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
    if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
    regards,
    Adwait Bachuwar

  • Movement of material from Unrestricted to Quality at sub contractor

    Hi Expert,
    I am looking for a way to move stock from Unrestricted to Quality for stock that is stored at a vendor (sub contractor)?
    Have you got any advice?

    Hi Anders,
    Is your wish to move your goods from unrestricted special stock at SC vendor to QI special stock at SC vendor?
    In this case you may have solution, please check transaction MB1B + relevant movement type (sorrowfully I cannot check 'cause I have no access to SAP now). Please take care of choosing proper movement type with special stock category 'O'.
    http://help.sap.com/saphelp_46c/helpdata/en/4d/2b909643ad11d189410000e829fbbd/frameset.htm
    BR
    Csaba

  • Movement of Material in Quality Inspection

    Does anyone know a way to move material from one plant code to another and still keep the material in Quality Inspection, blocked or restriced. We are now having to move the material to Unrestricted in order to move it and the mateial has actually gotten to our customers as a result. We want to keep the material in a status that would not allow orders to cut against it but we can move it to other plant codes.

    thanks to everyone for your responses. However, the MB1B will not work in this case. The seniro is this. I have material at an off-site warehouse with plant code ABCD (warehouse managed). The material is in QI there. I need some of the material at the manufacturing site plant code XYZ1. I want to enter a UB transfer order (STO) and not take the material out of QI at ABCD so that the remaining material left in ABCD will remain in QI. The problem is if we have material that is off grade at ABCD and we want one unit sent to XYZ1 for testing we have to take the whole off graded lot out of QI in order to move the one unit. Since the off grade was put in unrestricted it has on occasion gotten out to a customer.
    Edited by: Renee Flatt on Feb 7, 2008 11:00 PM

  • Movement of material from one S.Loc to another S.Loc (both are WM managed)

    Hi,
    When i transfer the material between s.locations (both are WM managed) TR itself is not getting created and i checked all the necessary configs and everything seems to be correct. But the strange thing is if i check in LS24 the stock is placed in interim storage type where as TO is not created also TR is not created as our process is TO will be converted automatically from TR.
    Any light on this issue will be much appreciated.
    Regards
    Sudhakar

    Hi Sudhakar,
    Check if Auto TR is enabled for the Movement type, if you need to have the TR information - disable this setting in  OMLR. Else Goto LT10 and move the Goods from Interim location to the final bins.
    Let me know if this helps.
    Thanks

  • Movement of material from one plant to other within the same country

    Hello,
    I would like to move material from one plant to other via tran MB1B.
    The system generates the following error while trying to save document :
    Account determination for entry BAS1 BSX 9000 ___ C100 not possible
    The system did not find an account for this transaction. This means that the account determination for key BAS1 BSX 9000 ___ C100 is not maintained in MM Customizing (Valuation). The key is made up of:
    Chart of account
    Transaction key (= Posting transaction)
    Valuation grouping code
    Account grouping code
    Valuation class
    System Response
    The system cannot update a G/L account for this transaction. You cannot post the transaction.
    Can you please tell me where the necessary setting should be made.
    Thanks

    Hi
    Please check the confirguration in OBYC for this combination and assign GL account for this combination of Valuation class, Valuation area.
    Regards,
    Lakshmanan Krishnan

  • Not able to clear material from quality stock

    Hi,
    There is a stock inconsistency between inspection stock in materials management and inspection stocks managed in inspection lots.Due to this, unable to clear inspection stock. I tried with QA08 ,MB1B also assiging inspection type 08 but still posting not happening fron inspection  stock to unrestricted stock.
    Regards,
    Ravi

    Hi Ravi,
    Please note / clarify following :
    1) If  in material master of QM you have activated  post to inspection (no lot generation with 01 or 04 type insp) then stock will appear in quality, and you should or can only clear it using MB1B 321 movement type.
    2) If already you have activated 01 or 04 or 08 then you will be allowed to post stock through inspection only (QA11).
    3) Check one more important point :
    From old lots somebody might have done result recording and given UD but forgot to do stock posting. you can find such lots with status 'SPRQ'. go to QA32 put particular material, remove range dates and select all insp lots. from the list apply filter to column 'system status' check for ' SPRQ ' in the filter. you will lots where UD given (green radio button)  but stock posting pending.
    Please elaborate if problem if not resolved.
    Best Regards,
    Shekhar

  • Transfer material from  quality inspection

    Hi PP and QM Guru,i have confusion in QM..when i use Qa32 for UD..after GR from production..the quantity is 40 pc in inspection...after inspection i sent only 10 pc in unrestricted wit QA32 rest 30 pc in quality inspection.
    ..but when i want to send rest 30 pc with pervious lot..it does not allow to do me...again i try to do manual lot generation..it also does not allow...
    now my material 30 pc is inspection....how i will send  this martial to un restricted
    kindly suggest me
    regards
    Akil

    Hi,
    First goto the tcode ; MD04 and check whther the balance qty is showing in QI, if so take the Lot number and goto Tcode : QVM2 / QA12 and post .
    Try using the QVM2 transaction code and post the balance qty which is showing under Inspection.
    Hope this will help you.
    regards
    radhak mk

  • Movement of Material from One Month to Another

    Dear Experts,
      By mistake I have posted a material in this months stock. Actually it should be in last months stock.
    How can I now correct it.
    i.e Reduce the stock from this month and Add the material to last month stock.
    Which moement type I can use.
    Thanks

    Hi Karthik,
    It is relating to Sales Order return.
    When I reversed the Delivery (related to the sales Order) The GL entries passed are
    Debit Stock XXXXX
    Credit COGS XXXX
    Now  what I want is to nullify this entry (for July Month)
    Enter the same entry in June Month
    In terms of Stock:
    I want the Stock to be reduced from July Month and Added to June Month (This I am able to do as per the steps provided by you MB1S)
    But when i execute MB1S the GL entries passed are
    Debit Stock XXXXX (This is Correct)
    Credit Initial balance of Material  (This is wrong)
    Plz help

  • QM- Material in quality inspection

    Hi Gurús,
                  Hi Gurús,
                   We have some materials in quality inspection. For each material exist an inspection lot but not an inspection plan.
    I would like to know if there is a way to move the material from quality inspection to unrestricted use, but without creating an inspection plan and recording a use decision
    Regards
    Enzo

    Hi,
    There are 2 possibilities -
    1) If you have activated QM at material master & due to this the material is placed in the inspection lot, then you can transfer the same in QM only.
    2) If you have not activated QM for material, but selected Inspection Lot stock at PO, then you can transfer the material in MB1B by movement 321
    Regards,
    Prashant

  • Error while Releasing the Stock from Quality-CRTD CHCR SPRQ

    Hai Experts
                          While releasing the stock from Quality i got  error like function cannot be caried out,
    The Material Status CRTD CHCR SPRQ.
    Thanks
    Rajakarthik

    Rajakarthik
    It looks like the status you mentioned are of inspection lot.
    CRTD mean created status of inspection lot.
    CHCR means characterstics required. in your case the the material master inspection view says characterstics required however your inspection plan does not have any cahracterstics.
    assign the characterstics to inspection plan & both the status of inspection lot will change. you will be then able to process the inspection lot to move the stock from quality to unrestricted.
    Regards
    Mahesh

  • Issue in moving material from unres to qual using 322 mvt. type

    There is a scenario in which user trying move the material from unres  to quality using movement type 322 in MB1B.
    error: Stock posting possible in qm only.
    Material Master: activated for the material.
    query;  Is it possible to use mb1b to move from unres to qual?
    What are other way to bring the unrestricted to quality, is that any material qm view setup required to achieve this.
    Edited by: kkr_chandran66 on Jan 7, 2011 1:57 PM

    We need to put it first into quality from unrestricted and then return.
    Dear from unrestricted to QI you can bring back through MB1B 322 movement type it is standard process but in your case it is not allowing because the stock which is in unrestricted was cleared means usage decision stock posted by UD so to bring back that stock in QI again you need to reverser that UD first for that refer my previous reply and apply note which will reverse the lot.
    what is the normal process steps for vendor return.{quote}
    Make a returnable purchase order,do the delivery to vendor through MIGO 161 movement type with reference to the returnable purchase order.
    Cheers
    KK

  • Weird Problem in QM stock posting from Quality Stock to Unrestricted

    Hi all,
    Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
    I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
    Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
    for this material and puts the stock in to Quality stock (I checked in MMBE).
    Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
    But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
    This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
    The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
    I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
    Sorry for the long post. How to correct this? Please help me!
    Thanks in advance,
    Vinodh

    I don't know why this happenned.  Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on.  That is usually greyed out and is set by having an inspection type activated.  You can't manually set that once an inspection type is added.  But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
    I would try to first clear all your inspection lots first.
    Then delete all the inspection types from the material.  And I mean actually go in and delete them. 
    Then use QA08 to reactivate the ones you need.
    Then see if this solves the problem.
    FF

  • Batch from quality inspection to unrestricted use.

    Hi everybody
    Someone can help me with the following problem?
    I made a good receipt for order with a movement type 101. We are using the QM module, then with the movement type 101 an inspection lot is generated, consequently the amount entered is place in quality inspection. For any reason the inspection lot was not generated or this was canceled. My problem is that, now the amount entered is in quality inspection and there is not a lot inspection to move the amount from quality inspection to unrestricted use.
    I tried use a movement type 102 (transaction MB31) but the system send the message that the movement must be done only with QM transaction. The same message was sent when I tried to cancel the material document (MBST).
    Someone know how I can create an inspection lot or how I can move the amount from quality inspection to unrestricted use?
    Thanks in advance.

    hi carlos
    if you create an inspection lot manually you cannot able to post the stock ( since a manual inpsection lot is not stock relevant) better thing is try to figure out why inspection lot is not genereated and solve it
    i think if the inspection lot is not generated it will show some message during MIGO itself.try to find the inspection lot using QA32 and specify the material and select Select all inspection lot
    regards
    thyagarajan

Maybe you are looking for